Exit Help
Jun 6, 2005Does anyone know the code to exit from THE whole ACCESS program.
That is when I click the close button on the switchoboard, I want the system to close the whole of access program.
ADVERTISEMENT
Using X To Exit
Nov 14, 2006If my user uses the MS Access 'X' button (upper right hand of screen) to Exit the application does anyone know what methods are triggered that may let me perform some task before the application actually ends?
Thanks
My Switchboard Won't Exit!
Jun 27, 2005I've created a new database using the standard Switchboard function. However, when I use the Exit Application command the database closes but MS Access stays open. It's a minor problem but infuriating, especially as I've never encountered this problem before and everything I try won't fix it. Any ideas?
View 5 Replies View RelatedHangs & Exit
Aug 21, 2005I'm having an application which is developed in access. It's running quite well, some times when I made changes to forms or reports it hangs for a while and exits without saving, it happens sometimes not always... what could be the problem? how can I rectify this..
View 3 Replies View RelatedBackup On Exit
Oct 13, 2005Hiya,
I have a database which on exit runs calls the following module and backs up the database to anther folder
Public Function BackupCopy()
'This function will allow you to copy a db that is open,
'You must set a reference to the 'Microsoft Scripting Runtime' for the CopyFile piece to work!
Dim fso As FileSystemObject
Dim sSourcePath As String
Dim sSourceFile As String
Dim sBackupPath As String
Dim sBackupFile As String
sSourcePath = "C:Database"
sSourceFile = "MyDB.mdb"
sBackupPath = "C:DatabaseBackups"
sBackupFile = "BackupDB_" & Format(Date, "mmddyyyy") & "_" & Format(Time, "hhmmss") & ".mdb"
Set fso = New FileSystemObject
fso.CopyFile sSourcePath & sSourceFile, sBackupPath & sBackupFile, True
Set fso = Nothing
Beep
MsgBox "Backup was successful and saved @ " & Chr(13) & Chr(13) & sBackupPath & Chr(13) & Chr(13) & "The backup file name is " & Chr(13) & Chr(13) & sBackupFile, vbInformation, "Backup Completed"
End Function
but after backing up correctly it brings me the following error
"Run-time errror '424':
Object required
any ideas what might be going wrong
Cheers
Help: Exit Access
Feb 16, 2007Hi all,
How would i close access via vba after a function runs?
I know how to close a form, but id like to close the entire thing.
Thanks in advance
Exit Code
Jun 15, 2005I have a form that automatically is shown when a user enters the database. I want to disable all exits of this form so that the user cannot exit the form before he/she exits the whole database. How do I do this?
View 2 Replies View RelatedExit Form
Dec 1, 2006I have a form with 4 tab pages. on the 2 tab page I have a subform that adds records to a table via 2 combo boxes.
I have been able to stop user from leaving a combo control blank or skipping to the next combo control, but if user clicks the Exit command button on the main form, from the 2nd combo control, it prompts that value has to be selected but the gives error:
"You cannot add or change record because a related record is required"
How can I stop this so form will close and undo the 1st combo selection and not give error?
Compress On Exit
Jul 30, 2014What are the pro's and con's and setting the database to compress on Exit?
View 5 Replies View RelatedExit A Sub Form Without The Mouse
Jan 4, 2006My main form has 2 “Continuous Forms” sub forms.
The cycle of the sub forms is set to “All Records”
Is there a way to exit the first sub form and move the focus to the second sub form utilizing only the keyboard? (Like shift + tab, or any custom buttons)
I’m trying to avoid using the mouse
Thank you
Exit Using A Command Button
Jun 14, 2005I have a form that has a command button on it. When the user clicks the command button I want the form that was up to be exited. I cannot find the correct syntax for this. Please help.
View 5 Replies View RelatedForm Exit Query
Jul 14, 2005Obviously doing something stupid here :-)
I use a form for data entry. When I hit the next arrow in the navigation button section (the default navigation buttons supplied by access), by data is saved into the relevant table.
When the I press the X on the form my data is also saved. However I'm not given the opportunity to say if I want to quit the form or save the data.
What do I need to set to get this functionality?
Thanks
Cannot Go To Next Record Or Exit If There Is Missing Value
Jan 8, 2006Hi,
In MS Access, Form
I want to set up that if there is missing value of the fields, then we cannot go to next record or exit the form when we click to do next action.
I tried to add the code in the After update event, or Exit event,
Example Code:
if (isnull([Zip]) or len([zip]) = 0) then
msgbox "missing"
[zip].setforce
end if
when I click to go to next record, or exit the form,
it give out message "missing", it work fines,
but, it still go to next record, or exit the form after the message.
How do I fix it? Thanks.
On Exit Changes Another Field Depending On Value
Apr 4, 2006I am working on adding the function of adding a date to a field on a form On Exit from another field. If the field I am exiting has a value of "No" i want to add the current date and if it is "Yes" I want to make sure the other field is null. I can't seem to find how to do this effectively. Can someone help me here?
View 2 Replies View RelatedCancel And Exit Form
Jul 7, 2006Hi all, I have a textbox with an input mask for an id number, so if I begin adding numbers I get an error message if they're not in correct format- this is fine- but I want the user to be able to cancel the entry and exit the form, but when I click the cancel button I get an error message about the id format- anyone know how I can allow cancel to override this?
thanx
Validating Data On Exit
Sep 10, 2006I'm trying to figure out how to validate a field to make sure the users are not entering any blank spaces into the field. I've tried setting the mask up as "aaaaaa" but it still lets the user enter a blank space.
I've also tried building an event procedure to run on exit that reads:
Private Sub Barcode_Exit(Cancel As Integer)
Dim LPos As Integer
Dim LChar As String
Dim LValid_Values As String
'Start at first character in Barcode
LPos = 1
'Set up values that are considered to be alphanumeric
LValid_Values = " abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWX YZ+-.0123456789"
'Test each character in Barcode
While LPos <= Len(pValue)
'Single character in Barcode
LChar = Mid(pValue, LPos, 1)
'If character is not alphanumeric, return FALSE
If InStr(LValid_Values, LChar) = 0 Then
AlphaNumeric = False
Exit Function
End If
'Increment counter
LPos = LPos + 1
Wend
'Value is alphanumeric, return TRUE
AlphaNumeric = True
If AlphaNumberic = False Then
MsgBox "Barcode cannot contain blank spaces, only letters and numbers.", vbExclamation, "Barcode Field Value"
Else
End Sub
****
However the message box does not come up and the form will not then let you get out of that field.
Any ideas? I've been checking on this field by running a query and then manually correcting the errors but I would rather that the DB check and force correction at the time the data is entered.
Any and all help will be greatly appreciated.
Charis
Uncheck Boxes On Exit
Jan 18, 2005I created a form to select individual subcontractors from my database to print their info and it works wonderfully, however, when I close the form I would like the check boxes to return to the default of unchecked so that when I open the form again, there are no checked boxes. How do I do this? Thanks!
View 3 Replies View RelatedRequery On Exit W No Code
Aug 12, 2005I have a strange problem. On some forms with listboxes, when I close (via a close button) the listboxes want to requery after the form closes prompting a parameter box to pop up. I have no code inserted to do this. If I file-close, it works fine.
However some users don't report this to happen on their PC's. All are supposed to be set up the same though with me as an exception (having it fully installed).
I tried converting it to 2000 then back to 2002 (after trying compact-repair) which did fix it for me opening holding the shift key, but not if I open it like everyone else. We just got new PC's running XP pro from 2000. Access version is 2002 and did not change.
Any ideas? Our internal programmer is stumped as am I. He just says "that's why Access shouldn't be used for anything". I develop basic apps in Access and he hates it so I have to make sure it's perfect before rolling things out or I'll be back to the stone ages.
General :: Run A Function On Exit
Jun 13, 2013I want to run a function when my application closes. But it must run in all cases, so running it on the last form, or in a hidden form, is not good enough. Even if I'm in design mode with no forms loaded, I want it to run.
For background info - my app is locked down tight against clients poking around. I have got a way for me as developer to get into the "back door", and what I'm trying to do is make sure when I'm finished doing my stuff that the app is locked again without me having to remember to do it.
Forms :: Exit From Operation
Jun 2, 2013I am trying to use to update the field in a record, What I am trying to achieve, is once I press/click the update button, cursor needs to move to next desire field which is "txteditcid", but after pressing the update button, I am getting following error (however, field is updating in table)
Run-time error '2110':
Microsoft Access can't move the focus to the control txteditcid
Code:
Private Sub Butupdatecustemail_Click()
Dim dbs As DAO.Database, update1 As String, rcount As Integer
Set dbs = CurrentDb
update1 = "UPDATE CustomerProfile set custemail='" & Me.txteditcustemail & "'" & "WHERE cid='" & Me.txteditcid & "'"
[code]...
Forms :: Text Box Value Changes To Zero On Exit?
Feb 3, 2014I have a form with text boxes bound to a table. There are two fields, ProposedSalary and ProposedIncreasePercent, that should not be populated at the same time. It's either one or the other. I've tried to add a validation to the percent field to check if the salary field is empty or has value. That did not work for me and I removed the validation. Ever since, if I try to input a percent value into percent field, it changes to zero on exit. I think i might have tried to add that same validation to the form itself but i checked all the properties and I don't see anything. I've looked at the VBA code view and did not see ProposedIncreasePercent referenced anywhere. I created the document for the form through the document analyzer and searched for that field and couldn't find it. So, I can't find anything coded anywhere to change that field to zero but yet it does. I've also tried to remove the field and add it again and it does the same thing.
View 2 Replies View RelatedExit Forms Without Saving
Jan 10, 2012Below is the code for exiting without saving. It works perfectly fine. I just want to know if I can change the MSGBOX message to something like "Are you sure you want to exit without saving?" instead of its default message - "Are you sure you want to delete this record? and also, right now, if I click NO when I am asked if I want to delete this record, it exit the form rather than staying in the same form. But how do I make it to STAY in the same form if I click NO.
Code:
Private Sub Command24_Click()
On Error GoTo Command24_Click_Err
On Error Resume Next
DoCmd.RunCommand acCmdUndo
[code]....
Event When Exit Application From SwitchBoard
Feb 25, 2007I have a switchboard with an exit button to exit the application. I want to add an event so it executes when user exit the application from the switchboard.
how to do that.
or how can I access the procdure for the application exit attach the event to
Problems With Refreshing On Exit From Combo Box
Oct 10, 2006Hi-
In a subform, which is based on a query with two tables, I have a combo box (Field36) that is used to select a name. In the OnExit event, the following code is used to refresh the remaining fields on the subform:
Private Sub Field36_Exit(Cancel As Integer)
On Error GoTo Field36_Exit_Err
DoCmd.RunCommand acCmdRefresh
Field36_Exit_Exit:
Exit Sub
Field36_Exit_Err:
MsgBox Error$
Resume Field36_Exit_Exit
End Sub
We recently changed the name from one field to two (first, last), and now the Row Source for the combobox is:
"Select( [last name] & ", " & [first name]) From [INTRPTBL];"
The Control Source is one field (link name) in a table, and I want both names to end up in there.
The problem is, the code no longer works. Since I'm testing things, I only have one record in INTRPTBL. The data from that record shows up in every line of the continuous subform, regardless of the name that was chosen before. When I try to choose from the combo box, it won't allow me to click on the name, all I get is an angry "ding!"
I'm assuming this has to do with not being able to refresh based on the name in Field36. How can I set it up so it can bring up the appropriate information based on the last, first combination (which are two different fields in the table).
Thanks so much!
Exit Form Without Data Entry
Jan 26, 2005HI
How can exit from an "DataEntry=True" and "AllowAdditions=True" Form without add a new record to the table ??
Any help please!!!!!
Thanks
Ps: i only can do that if i press 'esc' in the 'textbox', but that doesn't suits me. the form only have a 'textbox' and a 'commandbutton'
Form Data Clears On Exit
Jul 19, 2007I am developing an Access 2003 database for our shipping dept.
I have linked tables from a Sql Server 2000 Database that MakeTable queries were used to make tables then changed to Update Queries for the data.
The shipper opens a form (Call it Dock 1, Dock 2 , etc.) to scan a barcode or manually key the Batch Code in a ComboBox that is a lookup. "Enter" moves the cursor to create the next Record with the balance of the data pulled into the next 6 or 7 fields through VB Code. This data is written to a table for verification of each shipment.
My problem is that if the form is closed or the user exits Access, this form is empty when reopened but the table is intact. I need to be able to assure the form is not cleared on exit unless by request.
I have tried
"Private Sub Form_Open(Cancel As Integer)"
"docmd.gotorecord ,, aclast "
"End Sub"
in the Form, (Without the Quotes) nothing happened not data was returned but, the data was in the Table
I need all entries to be retained not just the last record
I am not a programmer but i have experience with VB6 and Access 2.0, 3.0, 97, 2002, & 2003. Any help will be appreciated and I offer my thanks in advance to all responders