1. I am trying to extract table from Access in XML format. On completing the extraction, the XML disappears from the folder where it was stored.....
2. Also, How do i see SQL query for table in Access... the SQL view option is not seen in the ACCESS dropdown.
When I try to transfer (ctrl c + v) data from a table in Excel to a table in Access it loses format.
Exemple: $ 1.000,00 (Excel) become 1000 (Access).
I need to keep the format to make sure that the code works properly.
I am importing data that has been put onto Notepad into an Access table - this works fine except the date in notepad comes across as a date and a time. When I put the table into a query and ask for the date to be Between [Specify date 1] and [Specify date 2] - does the user have to then put 7/02/2005 00:00:00 AM and xxx. I have tried this but it doesn't return all values. I have also tried just the dates but this doesn't return all values either - any ideas?
View 6 Replies View RelatedI have an excel table called Parameter with a column called "Test" -- The column contains integer numbers only. So all the numbers in the column are like 5,10,15,20 etc..I have an access macro which imports the entire excel table into a access table called dbo_Parameters
I have created an access macro to run "Saved Import" for 'dbo_Parameters"..After uploading, all the data in the column Test is formatted to mm/ dd/ yyyy. The Field Size is Integer, but the format is view format is converted to a Date..I have to change the properties of the column to "General Number" and get rid of the date format.how to change the import format!
a) The format of the column in Excel - It is number
b) The import procedure and saved import. I am unable to change the format of the import during upload. I make sure that the import format column is Integer
I have a database (split into front and backend). Users populate the table using a form on the front end. Recently, it has been pointed out that some of the data entered into one specific textbox is being changed on the table. The data entered is always has a minimum of a letter and number value i.e. "A1", "A2" etc. Upon examining the table, this has changed into numeric values i.e. "1291", "1061", "852"... etc. Looks like it is translating them into both 3 and 4 digit numerical values by the looks of things. Where more complex data is entered such as "2(A1, A2)" these seem unaffected.
The field is set to text, I have set no validation rule, format or input mask. Just can't see why access is changing these values. It seems to be translating them, but I can't see a pattern.
I have this database that do contains duplicate record (not duplicate field).What I'm trying to do here is to extract record that is unique to a new table And those record that were duplicate into a new table.the *Distinct that we used in sql will not work because it is not what I wanted. using distinc will give me unique record of the whole database.say i have this database that contain an ID:
2525
2658
2658
2658
2525
3678
so what i want is to extract unique record to a unique table and those that contain duplicate in another table.so the 3678 will be put in a new table and the 2525 and 2658 in a new table,,That way I will see which file will have duplicate
Hello,
Is it possible please to extract a tables structure and data into SQL in Access. I know how to do this in phpmyadmin (an internet based DBMS) but not so sure in Access.
What I want to do is to create an identical version of the table in SQL Server, so therefore require the structure and data in SQL format if possible.
Any help is much appreciated, thank you.
I have a really simple question :-
I want to write a simple routine to enter a value into a text box, retrieve a record from a table using the value entered as a key (or display a message if it doesn't exist) and then populate a form with the other fields from that record.
So if I entered code 123 it would find the record where code = 123 and display the associated description and price for code 123.
I've created the table and the form but am struggling to do the bit that retrieves the data ! Help!
I currently have 8 tables in my Database.
How can i extract all the information in those tables and put all the data into one large table? I want to extract everything apart from one table?
and can I format the large table once the data have been put in i.e. insert new Columns at the start, and populate fields based on the value of other fields values?
Any ideas or help? thanks
Kind Regards
Richard
Through searching, I have seen a lot of post regarding 3rd party downloads to extract pdf data to a table, any coding or a sample database that doesnt require 3rd software?
In the end, I want to import the pdf data to the table, then attach the pdf file automatically. URL....I have a pdf form that was developed in Adobe Live Cycle. For sake of example, lets say my form object names are:
TextField1
TextField2
DateField1
CheckBox1
CheckBox1[3]
Hi All experts,
I got two tables while one table contains (sales data) and another one contains (criteria). I would like to extract sales data based on the criteria tables and export to a new table.
Which method is the best to complete this?
Criteria contains many lines like this
CustomerID, ProductID & InvoiceDt
A, Guliter, 2007/10/5-2007/11/7
B, Piano, 2006/7/1-2006/12/31
Thanks in advance!
Regards,
Stanwell
I want to take the first 15 characters from a field in my table and place those 15 characters into a new field in the same table , assuming i can do this with a query.
View 3 Replies View RelatedI am a new user to access. I would like to extract a table from a URL, it is 4 fields and has around 150 records. One of the fields is made up of png files, relatively small ones. Is it possible to extract all the text and png files straight into access without individually saving each picture and attaching it to a record?
View 2 Replies View Relatedis it possible to extract the first letter of a surname in an Access Query? Below is my sample data, and below that is what I want to acheive.
Player Name
Hart, Joe
Cech, Petr
de Gea, David
Szczesny, Wojciech
Mignolet, Simon
Reina, Pepe
Lloris, Hugo
Howard, Tim
Begovic, Asmir
What I want the query to return:
Player Name
Hart, J
Cech, P
de Gea, D
Szczesny, W
Mignolet, S
Reina, P
Lloris, H
Howard, T
Begovic, A
I am trying to construct a query to extract mailing addresses from a table. I have individuals entered into a table (a separate record for each person) but if they are married I want an address such as Mr and Mrs J. Doe so that only one address label is printed off so that only one letter is sent out. If one of them dies then the address should only go to the surviving party eg Mrs J.
View 4 Replies View RelatedIs there a way I can take each entry in a memo field and put it into a text field in a separate table. The database is getting really big and the customer notes field for each record has lots of entries. The memo field looks like this:
8.4.14 Ordered 2 cartons
20.3.14 Ordered 2 cartons
4.3.14 Ordered 2 cartons
18.2.14 ordered 1 carton
30.1.14 ordered 3 cartons SCENTED wipes
[Code]...
I want to take each line and put put the date in a date field and the text in a text field in a separate table linked by CustID. Is there a way to do that?
using Access 2010, I have reached the 2GB limit. It's not the data, it's the PDF files I scanned in for each customer that has stretched the db to its limits. The db is also currently split.
I didn't realize Office had a 2GB limit; I assumed if you had a 64 bit computer and a NTFS partition, there would be no 2GB limit.
Using a template database in Access 2010, I need to extract the attachments to a folder and thus link them back to the database using hyperlinks. I can handle this task, but I'm not confident how to extract the attachments from each record (around 900) to a folder and have it do it automatically for all records. I can do it record by record, but that is not feasible with this many records.
how to extract all the attachments for each record, and have them saved in folders by their name or other ID, so I can link them back to the db via a hyperlink?
I wanna extract a variable count of columns and transpose it to another table.
My source table is called FC containing columns like 1 FC, 2 FC .., 12 FC
My target table is called Forecast_Quantities
Tried the following:
Code:
Public Sub TRANSPOSE()
Dim rs As DAO.Recordset
Dim rsNew As DAO.Recordset
Dim varItm As Variant
Dim I As Integer
Set rs = CurrentDb.OpenRecordset("FC")
[Code] ....
Somehow it doesn't recognize the I FC column in the table FC.
I have imported an Excel table with a column which has several values in one cell separated by "". In my case names of institutions afiliated with a patent. Example of the format of a single cell: MASSACHUSETTS INSTITUTE OF TECHNOLOGY (US) RIVE TECHNOLOGY INC (US)
In order to normalize the Access database I would like to extract the institutions to a separate table (institutions) and that the patent is related to both institutions.
I am using Access 2007.
I have a field in a table that I'd like to extra the texts from. The are stored in below format (separated by colons). They don't always the same amount of characters and not all of them have the same amount of texts.
Some may only have Text1:Text2::, while some may have Text1:::Text4.
Text1:Text2:Text3:Text4
I have a notes field in the customer table that is a memo field. An example of one customer's notes field data :
<div>20.3.14 Ordered 2 cartons</div>
<div>4.3.14 Ordered 2 cartons</div>
<div>18.2.14 ordered 1 carton</div>
<div>30.1.14 ordered 3 cartons SCENTED wipes</div>
[Code] ....
I want to extract the date to append to a date field in a "Calls" table and the comment into a text field in the "Calls" table. Is there a way I can do this via query or code?
I have recently installed access 2003 w/access 97 installed both are on my hard drive. When I create a new db in access 2003 it saves it in an access 2000 format. Does any one know why it does this?
Thanks--Appreciate any help
I have recently installed access 2003 w/access 97 installed both are on my hard drive. When I create a new db in access 2003 it saves it in an access 2000 format. Does any one know why it does this?
Thanks--Appreciate any help
Hi all and a happy new year,
I am getting more and more infuriated with dates and access. I thought I had it all working, and now I get to 01/01/2008 and it all falls apart. Anyway,
I have a lump of ASP that finds various dates and queries them against an Access DB. I have used response.write to see what is being sent to the database, and they are in UK format DD/MM/YYYY as they should be. The field in my DB stores the dates as DD/MM/YYYY. Now for the bit that is driving me mad.
Somewhere in access, US format is being used. For instance, I have a date value that finds tomorrows date. In this case its 02/01/2008 for the 2nd of January 2008. When I enter the SQL in access though, no data is brought back. If I query on date equalling 01/02/2008 then data is brought back!
So, my program is outputting UK format, the dates are stored in UK format, my regional settings and everything else on my computer are UK format. Access is trying to find US format though-why?
Its driving me mad!
Hi All,
The following code is supposed to insert a date formatted as dd/mm/yyyy into a table, when i view the mySQL string in the debug window it shows the correct format, however when i open the table it displays the date as mm/dd/yyyy.
The table's date field userdate is formatted as a short date field with an input mask of dd/mm/yyyy.
My computers date settings are set up as dd/mm/yyyy as well
Any ideas on hows to correct this?
Thanks in advance. :)
Public Function Test()
Dim mySQL As String
Dim dtDate As Date
Dim db As Database
Dim qdf As QueryDef
Set db = CurrentDb()
dtDate = Format(Now(), "dd/mm/yy")
mySQL = "INSERT INTO tblCurrentUser( userdate ) values (" & "#" & dtDate & "#" & ");"
Debug.Print mySQL
'*The debugger shows* INSERT INTO tblCurrentUser( userdate ) values (#04/05/2005#);
' However the value in my table tblCurrentUser is05/04/2005 is in mm/dd/yyyy format
Set qdf = db.CreateQueryDef("", mySQL)
qdf.Execute
End Function
Here is my problem:
Let's say that I have a table with a field name of "Phone Number". I input about 200 #'s in the following format: xxx-xxx-xxxx. I decide that I want to use the an input mask to create (xxx) xxx-xxxx. I input 50 more #'s. The previous 200 have the old format while the 50 recent #'s have the new format. How can I update the entire field from the old format to the new without reentering the data? Or can I? If I can, will the change also apply to any forms created off of this table?
Thanks