Hi,
I am extracting data from linked db2 table using access make table query. First I create a select query and can view the linked db2 data, but when I change to a make table query I get an error message, "invalid argument", when I run the make table query. There is no selection critera specified. Has anyone had this happen? and Do you know a solution?
Thanks for your support
GinnyP
I have a make table query which creates the new table on the local front end.I have now split the DB, so need to know how I can get this query to make the table on the BE i.e. how do i link it.
View 14 Replies View RelatedI have an MS Access accdb with linked SQL Server 2012 ODBC tables. I am working on a procedure to copy data from local tables to these linked tables (identical schema). I did a simple
Code:
DoCmd.RunSQL "INSERT INTO linkedTable SELECT * FROM localTable"
This works, but is very slow. Way too slow. (INSERT copies the data one record at a time).
I would like to copy the data in a bulk operation, or operations that I can execute programmatically.
I have what is probably a stupid question but I've been struggling with this one for a while. I have an ordering database which has an Orders table (containing Order ID, Date, Supplier etc) and an Order Line table within which I have a combo box for Product name, supplier, price, VAT rate, Line price etc. At the moment, I have the order line table as a subform within the Order form (run from the Orders table). The problem I'm having is the subtotal and total fields. At the moment these are in the Order Line table as I cannot figure out how to get these in the Orders table. In summary, can I make a calculated field in one table that calculates values from another table (linked by Order ID)?
View 3 Replies View RelatedI need to be able to extract individual fields from a table as strings in order to then send this data to my EPOS printer (which will accept only strings to print) I have created the table with a query so the question could equally be how can i output strings as query results. Im using Access97 HELP!!
I have tried to set up a ADODB.Connection but either Access 97 wont accept it or i've got the coding wrong
Hi Guys,
I have a table called "tblEmployees" with the following fields:
EmployeeNo (Primary key)
Name
Address
DOB etc
Letter1Dated
Letter2Dated
I have another couple of tables:
"tblLetter1" with the following fields:
EmployeeNo (Primary key)
Name
Letter1Dated
Letter1RemainingFields...
"tblLetter2" with the following fields:
EmployeeNo (Primary key)
Name
Letter2Dated
Letter2RemainingFields...
I want to be able to put the data from 'Letter1Dated' field (from the "tblLetter1" table) into the 'Letter1Dated' Field in the "tblEmployees" table.
Likewise, I want to be able to put the data from 'Letter2Dated' field (from the "tblLetter2" table) into the 'Letter2Dated' Field in the "tblEmployees" table.
All three tables have the same primary key (EmployeeNo), which makes it even more difficult to do this!
I understand this may sound abit confusing so i apologise for this.
I would really appreciate it if anyone could point me in the right direction please.
Thanks alot.
when I have created my table I have created a field called name that stored both last and first name. Right now I need to extract the the last name from the the field name and store it in another field "lastName". Any ways to do that?
View 7 Replies View RelatedI am an access (2003) amateur, willing to generate an excel file or table from the data from many queries. Moreover, some fields in those queries having different names but same data type, should be filled in the same columns in the new excel/table. Should I use Macro/SQL?:(
View 2 Replies View RelatedThis question will surely show my amateur Access skills... I have to add a field to a linked table. However, the table doesn't save my changes. Is there something I need to do before I make my change?
I get the error message "Table 'name' is a linked table with some properties that can't be modified. Do you want to open it anyway?
Any ideas? Thank you! :confused:
Hi,
I have a dabase with linked tables. I want to copy the table in my local database. I tryed it with DoCmd.CopyObject but that also make a linked table.
does someone know how to do this.
I'm using MS access and Excel 2000. I have an Excel spreadsheet that contained 8 columns, the first column has all cell format as Number, the rest of the column is set as custom date format of 'dd/mm/yyyy'. When I create a linked table in MS Access, the data types does not matched my excel spreadsheet columns, the 'Number' data type is a double and I want a Long Integer in Access, and the custom date format become text datatype but I wanted a DateTime datatype. Is there any work around this? Seems like it is a common problem.
Your prompt response is greatly appreciated!
Thanks in advance!
Martina
I use a Make-Table Action query to import data from a linked table into my database. The linked table is on a network server that is automatically updated.
One column of the linked table is named "QTY/PARTIAL" and approximately 10% of the 500 records have a "P" after a number i.e. 1000 P. I would like to separate the number and the P into separate columns in the new table to faciliate being able to compute the total number "QTY".
Thanks,
Gunner...:confused:
I am using Access 2003.I have created a Makle Table Query which gives me the invalid argument error because it makes the database balloon to over 2gb. I have two questions:
1. Is it possible to get the make table query to save data in one database until it reaches say 1.9 gb and then begin saving the rest of the data in another database?
2. Is there a wey to pause or stop a make table query to see the results and then let it run again?
I have a table that I imported from another database. I used import Access - Link to the table source by creating a linked table. - then downloaded in my database.
I want to use the linked table to create relationships and forms but do not want to even accidently edit it. The table gets updated in the database on a weekly bases and I am hoping it gets updated automatically in my database as well. does it automatically get updated or do i have to set up something?
Also, I want to protect the data in that particular table and either password protect it or make it read only. Can I do that? If so, how?
I have data recorded using an input mask,
"RF">L-0000;;*
to display data in the style: RFA-0001, RFA-0002 etc.
I have a make table query to join this field to another, to create a combo box look up.
Unfortunately, after I run the query, the only data from the input mask that gets imported is A0001, A0002 etc.
What have I done wrong? I guess the error must be in my specification for the input mask...
Any and all help gratefully received.
This the first time I post in this forum and I tried looking for an answer to my question before posting, so I apologize if my question has been answered previously.
Is it possible to determine, in Access 2000, the data type in a Make-Table query of a new column with null value so that it does not default to binary.
Here is my sample sql:
SELECT tblAddressBook.Name, Null AS Email INTO tblTestTable
FROM tblAddressBook;
The output is tblTestTable with two columns: Name and Email. The data type of column Email defaults to Binary. How do I make it default to Text.
Thank you.
I have one DB that is used for creating/storing customer ID's, and another DB that is used for creating/storing job information for customers.I have linked the table from the customer DB to the job DB.
There is a table in the job database that holds customer name and ID, and some VBA that generates unique job codes.
Is it possible to have the data from the linked table automatically update into the existing table?
I use an Excel interface to retrieve data from an Access file that has approximately 1 million records. I use an MS Query from Excel to run an Access Query to retrieve the data.
I have 16 "Criteria" fields (columns) in Excel that I change with drop-downs. Each criteria column has 2 to 9 values set; a total of 75 values. I pass these criteria fields to Access via a table link in Access.
The criteria of the fields in the query that is run in Access to pull the data based on the table link is updated by using the Values In A List (IN) option.
When I refresh this query in Excel, it pulls the data fine, but may take 10 minutes to run. (I am using MS Office 2003, 1Gig memory). I have limited VBA knowledge. Is there a better/faster way to pull this data?
i need to Concatenate a fields data into one cell in a query according to linked table ID....
View 3 Replies View Relatedcounting in access on a make table query.I work for a recruitment company, and have a table for the vacancies we raise. I then have a table linking to this where you can record the candidates submitted for each role. The 'CVSubmitted' and '1stInterview' are a check box yes/no. I now want to run a query where I have a sum of the total number of CV's and 1st Interviews for each role.
View 1 Replies View RelatedI'm having trouble with a new project I'm working on. The application is mainly going to be used to display data, which comes from a linked table. It has to be a linked table (in my opinion) because it's replaced once per week from a fresh data dump. For each of those records, though, there will be notes made in a local table named "Custom-Data". My trouble is displaying a mix of information from the linked table, "Roster", and "Custom-Data" because linked tables can't be assigned a primary key.
Essentially, when a record is pulled up, a bunch of data from "Roster" will be shown in addition to the comments from "Custom-Data".
I have two table
1 is name master containing EMPID(Primary Key)
2 is Saving which also contain EMPID
i want to entered data in Saving with each and every EMPID with Master
I am rebuilding an application for a client and I have an Access table that I am using as a temporary table. Once the user is done entering information into the temporary table through a form, the user presses an update button that appends the records using an Append Query in Access to an SQL Server Table.
The following error message occurs:
"ODBC -- insert on a linked table 'linked tblname' failed.
[Microsoft][ODBC SQL Server Driver][SQL Server] Explicit value must be specified for identity column in table 'linked tblname' when IDENTITY INSERT is set to ON. (#545)
I am using a form, subform combination to record a bill with many details. The bill summary is posted into a tbl_TransactionsMain table in SQL Server using the ADO AddNew method. The PK for the tbl_TransactionsMain is then entered into the temporary table in Access. When the temporary table records are appended into tbl_TransactionDetail the error message occurs.
What is also interesting is while typing out this post I thought to test the error by manually trying to run the query. The query worked like a charm! :confused: When the orginal error occurred off of the form I tried to run the query manually and it failed. I am guessing that this might have something to do with the ODBC timeout.
I think SQL Server/ODBC connection is not liking how I have a set of records in an Access table with foreign key numbers assigned when I am attempting to append the records. I am new to SQL Server and any ideas are most appreciated! :)
I have two tables, submit and imgdest. Submit is edited by front-end users to load pictures for back-end users who then delete the images when they're done with them. Submit is edited by a form, in the form I've placed a button (Command37) that has code:
Code:
Private Sub Command37_Click()
Call InsertData
MsgBox "Completed", "0", "Completed Backup"
Exit Sub
End Sub
Private Sub InsertData()
[code]....
This code was working for a short while, now anytime it's run I get error 3027 - Cannot update. Database or object is read-only. However, I can open the linked table and manually change information in it with no problems.
Hi everybody,
Beginner here needs help !
I'm building a make-table query for which if the result is null (no record correspond to the set of criterias), a default message like "there was no activity during the period" would appear in the table (not a message box...I need the message in the output table). The best I could think of is an IIF function but it doesn't seem to work... Is there any way to do this without using VBA?
Thanks in advance !
I am trying to build a Form that will show an estimate (then eventually will be moved to a project if customer and employee aggree to price and project) in a Form F_Estimates is a M_Customers(Customer_ID) (Based on a Table) and thier info in a Subform. Also is the "projected costs" from parts out of the Parts(Part_ID) (Based on another Table) in a second Subform as a list that I need to calculate $$$ in
(Dang that still sounds evil and definately NOT understandable even after edit... so)
Here's some basic info
Tables
EstimatesandParts - Table
EstimatesandParts_ID : Autonumber
Estimate_ID : Number
Part_ID : Number
Parts - Table
Part_ID : Autonumber
PartNumber : Text (not a number due to some part#s have letters in them)
PartName : Text
Unit Price : Currency
Description : Text
Estimates - Table
Estimate_ID : Autonumber
InvoiceNumber : Text (again can have letters in it)
EstimateDate : Date/Time
EstimateTime : Date/Time
Employee_ID : Number
Customer_ID : Number
ProblemDescription : Memo
Customers - Table
Customer_ID : Autonumber
FirstName : Text
LastName : Text
CompanyName : Text
Address : Text
City : Text
Province_State : Text
Postal_ZIPCode : Text (CDN Postal codes are letter num letter...)
you can see the link table in the EstimatesandParts Table
Now I want to use that link to populate a subform in the F_Estimates form
Forms
SF_Customers - SubForm
(all boxes atm are text boxes on this form till I figure out the Parts section then will use same base for this so I can pick any customer in the database to be the customer for this estimate. Also will have ctrl button for making new customer with customer form and a refresh on Focus Gain bit of code)
FirstName
LastName
CompanyName
Address
City
Province_State
Postal_ZIPCode
SF_Parts - SubForm
Default View -Continuous Forms
(want it to be a list of parts that I can grab prices and descriptions from then in a bit of code to calculate a cost of parts)
Part_ID : Combo Box
Control Source - Part_ID
Row Source Type - Table/Query
Row Source - SELECT Parts.Part_ID, Parts.PartNumber, Parts.PartName, Parts.UnitPrice, Parts.Description FROM Parts ORDER BY Parts.Description;
(Pulls info from the table Parts for input into a list of parts to be used on that project)
PartName : Text Box
UnitPrice : Text Box
(here's where I run into problems due to the fact that the form is not based on the parts table but rather the link table EstimatesandParts so I can't propogate the info to the 2 other text boxes, ps I dont care if they cant be text boxes and have to be linked or some other type I'm not "set" just need to find out how to make it work )
(have tried a couple things to complete this task)
Me.txtPartName = Me.Part_ID.Column(2)
Me.txtUnitPrice = Me.Part_ID.Column(3)
(works AWSOME ... for ONE ROW then propogates the second selection to the first and second and third selection to first second and third and so on ...)
(tried to make control source for the txtPartName to)
=Forms!Parts!Partname
(Doesnt exist .. akkk, cant use ActiveForm either as it doesn't focus on the SubForm but the MainForm ... cry)
F_Estimates - Form
Estimate_ID
InvioceNumber
EstimateDate
EstimateTime
ProblemDescription
(all basic Text Boxes)
Employee_ID
Customer_ID
(Combo Boxes Select Customer and Employee from list of present ones of each)
SF_Customers
SF_Parts
(Both SubForms on the main form)
Now this is an Exerp from my entire Database I like to work on one small problem at a time and I have made this its own little database till I figure out the problem then I will bring the info I learn back into the rest of the database and go from there ...
Hope you can help I have a feeling I will need to make a recordset and go from there but I'm just not able to wrap my head around that for some reason
Thanks in advance for ANY and ALL help that I get from here