I need some help. I created a database to capture information from an employee survey. Most of the answers required a check if they agree or no check if they do not agree. There was one "memo" field inwhich we allow the employee to VENT. I have provided the team with all sorts of reports with percentages and figures. Now they want to remove any comment that had money, pay raise, bonus etc. They also want to organize the comments in some type of flow. Like all the "pats on the back" in one area, Day offs in another, plaque on wall grouped together, etc.
In my query I can query for ODD or EVEN Street Numbers using the syntax below:
OE: [PROPHOUSENUMERIC] Mod 2
This works fine returning just odd or even numbers.
Now the problem I am facing now is that I wan the same query to return both Odd and Even Street numbers if I did not ask for either Odd or Even Street Numbers.
Is this possible. I have search hi and low in the forum but no answer. I have attached the file I am working with this post.
You guys have been so helpful in the past. Perhaps you can help me with this as well. I believe it’s a bit out of my scope. I have a list that reads similar to this:
Field 1
DMA: ALBANY CAR 1 CAR 2 CAR 3 DMA: BOSTON CAR 1 CAR 3 CAR 4 CAR 5 CAR 6 DMA: HOUSTON CAR 1 CAR 3 CAR 4 CAR 5
I need it to read like this:
Field 1 Field 2
DMA: ALBANY CAR 1 DMA: ALBANY CAR 2 DMA: ALBANY CAR 3 DMA: BOSTON CAR 1 DMA: BOSTON CAR 3 DMA: BOSTON CAR 4 DMA: BOSTON CAR 5 DMA: BOSTON CAR 6 DMA: HOUSTON CAR 1 DMA: HOUSTON CAR 3 DMA: HOUSTON CAR 4 DMA: HOUSTON CAR 5
If my list was this short, I would do it all manually, but my record list is in the 10,000s. Basically I want field 1 to read: DMA:ALBANY and Field 2 to read:CAR 1, and so on. I’ve tried linking the table to itself in a query, however, that hasn’t proven to be helpful. I've also searched the FAQ's and newsgroups. Any insight would be appreciated.
I have a table called "tblEmployees" with the following fields: EmployeeNo (Primary key) Name Address DOB etc Letter1Dated Letter2Dated
I have another couple of tables:
"tblLetter1" with the following fields: EmployeeNo (Primary key) Name Letter1Dated Letter1RemainingFields...
"tblLetter2" with the following fields: EmployeeNo (Primary key) Name Letter2Dated Letter2RemainingFields...
I want to be able to put the data from 'Letter1Dated' field (from the "tblLetter1" table) into the 'Letter1Dated' Field in the "tblEmployees" table. Likewise, I want to be able to put the data from 'Letter2Dated' field (from the "tblLetter2" table) into the 'Letter2Dated' Field in the "tblEmployees" table.
All three tables have the same primary key (EmployeeNo), which makes it even more difficult to do this! I understand this may sound abit confusing so i apologise for this.
I would really appreciate it if anyone could point me in the right direction please.
when I have created my table I have created a field called name that stored both last and first name. Right now I need to extract the the last name from the the field name and store it in another field "lastName". Any ways to do that?
Is there a possibility to use a shorter code for extracting one field from one record, than opening a recordset, getting the field, closing it and setting the recset to "Nothing" again? I'm doing this multiple times in my code and it seems a bit too much for what it's supposed to do.
Code: sql = "SELECT tblAdFlgDaten.* FROM tblAdFlgDaten WHERE (((tblAdFlgDaten.AuftrID)=" & ABAuftrID & _ ") And ((tblAdFlgDaten.Schritt)=2))" Set RSnap = dbase.OpenRecordset(sql, dbOpenSnapshot) If IsNull(RSnap.Fields(2)) Then ... ... End If RSnap.Close Set RSnap = Nothing
Hi all, Been pulling my hair out about this for a while, so i hope someone's feeling kind:
http://www.agga.dsl.pipex.com/pics/AWF01.gif
I'm using the BHRefPrefix to build part of a reference number. The Principal and Site exist on a separate form, and i need to use both as criteria in order for the correct BHRefPrefix to be returned.
I sort of get it working using two joins, but it doesn't let me add any new records. I've tried straight queries, queries with DLookup expressions, and i just can't get what i need.
I am in the process of changing over a text field to a memo field to generate more space (in 5 different databases :eek: ) Thanks to all the good info on several searches of this forum, I am pretty clear on how to do that.
The question is... when I convert a field that already has information in it, will I lose the current information?
when i change records, my subform that has a memo field, shows the memo field data is "highlighted". i can make a mistake and hit any keyboard key and the memo field data will get erased.
is there a way to prevent such a problem?
if not, is there a work around. eg, hide the memo field until needed for more input? ideas on both issues?
DoCmd.OutputTo to export a query but this truncates the memo fields, but in the db window,right clicking and choosing to export does not truncate the data.
How do I code to output all the data without truncating?
I have a txt box on a report which should show comments.. In the background table the field this txt box is bound to has a data type of memo. Yet the txt box on the report stops showing any more than 255 characters! any clues? I know 255 is the field size set for my Txt fields but memo fields should be able to display 65000000000000000 trillion characters with no problems.
When I look at the table the memo field has all the txt in it, it just wont display all the txt on the report.
Are there any other advantages in using a text field verses a memo field other than memory allocation? Memory allocation seems like such a small issue these days.
I need to take out the carriage returns but keep the items delimited in some way so they all apear on the one line. These are the child parts for kits so i need to keep them on one line as i import them or via a query so i can see the parent part they belong to.
If I read the documentation then memo field in a Access table can be 65.000 chars long. I have three memo fields in a linked ODBC table which is filled by a append query from SQL-server database. The text in these field is cut off by 255 chars. Does somebody know what the cause of this can be?
1. Is there a limitation/property where I can configure the length of Access memo field? DAO? I have read something about this but I don't understand this.
2. How can I trace that everything is send from the source? Maybe it's cut off at the source site. On this moment I don't know something about a Linked tabel. Is there a sniffer or trace tool so that I can see what kind of data is realy send?
Let me say first I am a novice Access user, just trying to teach myself a few things to make my job easier. So take it easy on me with any feedback.
This is my situation. I am using a web based help desk ticketing software that has an Access DB. I have created a couple of queries and linked them together that seem to be working and giving me the data that I want with one exception.
I am tring to query a memo field, which is the description of a ticket, and the output is only a small portion of what is actually entered in to the table. Is there a way either in my query or report builder to make a change that will output all of the data from the description field?
A couple of things that I've tried on my own are to change the data type for that field from memo to text, however that that puts limits on the amount of data that can be entered in and causes the help desk software to function incorrectly. I've also turned on Can Grow and Can Shrink for the text box for the output in my form.
Any help you can offer would be greatly appreciated.
Ok, firstly i have search google and this forum from top to toe and no-1 has an answer that works for me.
I am running a query, now i have completely simplified it. The query is now just picking up a field called recommendations. Recommendations is a memo field with no formating or index on at all. Now, when i run the query as normal it works fine... everything is there. But when i have to group by it. It cuts it off at 255 charactors. The thing is i need to do some sums and counts within the query aswell so it has to be.
I have checked microsoft and there suggestions are not any use.
I have a form with a memo field. This field is based on a table with a field set as a memo data type. The problem is that although the form field lets you type endlessly, it only saves 255 characters. A memo field is supposed to let you enter up to 64000 characters. Has anyone else ever had this problem, if so what was the solution?
I have a form set up where user's type in an explanation of how a claim is being appealed and resolved in a memo field.
One problem, for some reason management doesn't want these explanations to end with a period. But the users keep ignoring our request and keep using the period.
Is there a way that you can code this memo field to where it will allow punctuation throughout, except at the end?
Hello All... I've got an address multi-line field in my form. The user types his 1st line of address in the field, presses enter, types the 2nd line of the address, presses enter & so on....And submits the form. The problem is only the 1st line is uploaded into the access database. The field is a memo data type. Can anyone help me with this problem? Cheers...
I'm using an append query to add a new record from a form. The form has a text box and the contents get entered into a Memo field in the database. When I put more than 100 chars in the textbox and try to save to the database I get an "Invalid Argument" error.
If I use less than 100 chars then it appends fine. The error doesn't come from the textbox, I can put over 100 caracters in that, the error comes from the Append process.
In the append query I use this string. Expr13: [forms]![additem].[description]
additem is the form description is the textbox field.
i am using a memo field in a table that is being used in a form as a combo box.when i use the combo box drop down the form is only bringing in the first 255 characters of the memo field, how can i change this?
i am using a memo field in a table that is being used in a form as a combo box.when i use the combo box drop down the form is only bringing in the first 255 characters of the memo field, how can i change this?