Getting Grade With A Query
Jun 21, 2007
hello
i have had alot of help on these forums already and i thank those that have helped me thus far.
but i am having some troubles doing a query.
i am trying to get a students grade.
but each assesment they do has a differant weighting.
for each assesment they are given a percent for it say 80% which may have a weighting of 30.
while another assesment they have they get 52% but it has a weighting of 60.
and if they missed an assesment it doesnt affect there grade.
so what i am asking how can i get there percentage at the end of all the assesment and then turn that into a grade like B+.
to better show you what i mean here is the end report i have to make which shows how subjects have weighting.
http://i18.photobucket.com/albums/b145/hi2chriz/1stPage.jpg
http://i18.photobucket.com/albums/b145/hi2chriz/2ndpage.jpg
hope i was clear
View Replies
ADVERTISEMENT
Sep 5, 2013
I have a database with:
2 tables, tblStudentMarks and tblGrades
2 Queries qryResults and qryStudents_Grades
1.qryResults:Calculates the TotalAverageMaths+English+Science)/3.
2.qryStudents_Grades:Calculates the students grades based on the TotalAverage by comparing the total average to the min & max marks on the tblGrades.
Grades are compared within a range specified in tblGrades with the following SQL wich is the query qryStudents_Grades:
Code:
SELECT SM.Student_ID, SM.Students, SM.TotalAverage, SM.Maths, SM.English, SM.Science, GD.Grade
FROM qryResults AS SM INNER JOIN tblGrades AS GD ON (SM.TotalAverage>=GD.MinMarks) AND (SM.TotalAverage<=GD.MaxMarks);
Question: i would like to also calculate the grades of the individual subjects in the same query (qryStudents_Grades), where the marks got by a student in the subject..say maths is compared to the (tblGrades) and grade is displayed in a colum say maths_grades for each student.
How can i do this for all subjects in one query. (qryStudents_Grades)?
View 7 Replies
View Related
Dec 7, 2005
Hello friends.....
I am new here... and want your help...
Please tell me how I can apply alphabetic grade (A, B, C or F) in MS access
For example we have these marks of students
45
55
86
74
49
Then how I can apply grade to these values..
Hopping to see u soon.
Take care, and have a good time.
View 3 Replies
View Related
Jan 24, 2008
Anyone know any issues that would stop me down grading an access 2007 database. Someone up converted it without me knowing but I want it to be usable for people on older versions.
I went to save as access 2003 and nothing happened. My initial thought was recompile the vba code and do a compact and repair. I did this and still nothing happens. I hit save as access 2003 and nothing happens no error messages or anything (HELPFUL).
View 4 Replies
View Related
Aug 23, 2005
I am having a problem coming up with a design for reporting by grades within a golf recording system. I want to calculate the grade for each player within a query, based on their handicap.
tPlayer contains the fields pName & pHandicap. tGrades currently contains gGradeName, gMaxHandicap.
In a query I want to be able to list by Grades
Grades could be
A , 10
B , 15
C , 27
or
A , 10
B , 14
C , 19
D , 32
or whatever. but the number, name and ranges of Grades may change.
While it may seem odd, I want to be able to change the Grades and requery on the same Players data.
I feel it should be simple but have not been able to come up with either the design or SQL that would enable me to do this cleanly.
Hope this makes sense - any help would be appreciated.
Many thanks...peter
View 4 Replies
View Related
Apr 10, 2006
Hi!
I am creating an access database where the results to an exam will be entered (multiple choice exam so nothing fancy), and in turn they will be graded. I have searched and the closest thing I have come to this is the survey DB with a field for each question. However since this is a exam rather than having "no right answer" this answer needs to be compared with a key. So my question is as follows:
What table structure is ideal for this? ( I have yet to find a way to compare rows )
I appreciate any help on this you can offer,
Joseph Cohen
View 4 Replies
View Related
Dec 27, 2007
dear all;
i've a table #student like
studentID score
Sminth 88
samantha 76
Williamv 45
martell 78
and i also have a #grade table
Grade Start end
F 0 45
E 46 55
D 56 65
C 66 75
B 76 85
A 86 100
and my question is,how to calculate the student table's grade value?
i want the result like below..
#studentID score Grade
Sminth 88 A
samantha 76 B
Williamv 45 F
martell 78 B
anyone can help me??thanks alot
regards
martell
View 12 Replies
View Related
Oct 19, 2004
What is the best way to impliment a query in a form so that the user can view the query records, and have the option to print or save the selected record using command buttons?
I tried subforms but I could not get the command buttons to work in the subform after it went into the form, it wanted to print the entire form instead of the selected record from the subform.
So in a nutshell I have 3-4 queries that are built, and I want to have them show up on my form in a format that the user can scroll through the results and select a single record of the results and then print or save that individual record from the form, if such a thing is possible.
Thanks in advance
Todd
View 1 Replies
View Related
Mar 24, 2013
I am trying to do the good 'ol sales report (query) to include customers with no sales.
I have a customers table, account number table, sales table & sales (line) detail table. (all linked in that order)
If I run a query to show customers (in the customer table) with account numbers, that works
An unmatched query to show customer without an account number works (but of course the unmatched account number field isn't shown).
How can I get the two two be shown together with the "unmatched" having a null or 0 for their account number?
I am guessing in principle, the resulting solution can be modified to show customers without sales alongside those with sales?
View 3 Replies
View Related
Mar 4, 2015
In some cases I create pass-through queries and use these in an Append or Make-table query to bring data locally.
All is well and fine until source data changes and the pass-through query runs too long and times out.
If needed, I can extend the timeout value in the Parameters of the pass-through query no problem, but when I try to open the Append or Make-table query in Design view to do the same, the pass-through query is first triggered and then throws the timeout, and I cannot access the Design view of the Append or Make-table
Is there a way to open an Append or Make-table query in Design view without invoking the source query?
View 1 Replies
View Related
Oct 28, 2005
Hello All,
I'm trying to run a UNION query that joins five queries through a MS WorkSpace into a DAO.recordset in VB. I'm pulling the data from a SQL Server Database through VB in Access. I'm attempting to open a recordset with a query passed to it as a string. The query is below. For some reason, I'm receiving a message: "MS Jet database engine cannot find the input table or query. Runtime Error 3078".
Here's what's puzzling. When I run a single query without any UNION statement, the code finds the table and runs fine without error, but anytime I join two or more queries with a UNION statement in the VB, it gives me the error.
I've executed the same UNION query in both Access Query Builder and SQL Server's Query Analyzer and they work fine in both environments. It's only when I call the query from a DAO.Recodset with VB that it causes this problem. The following is a sample of the UNION query joining two of the five queries. Does anyone have any idea what could be the problem? The following query executes in about 5 seconds so I don't think there's a "time-out" issue. I'm thinking that the UNION statement may be the culprit. Maybe there's another way to approach joining these separate queries? Any help would be most appreciated. Thanks.
SELECT SalespersonID, Sum([SlsPrice]-[RtnPrice]-[SlsDiscnt]+[RtnDiscnt]) AS fldPrice FROM MyTable WHERE (((Source)='d') AND ((DistrictID)='01') AND ((CategoryID) = 'HCPROD') AND ((BrandID)<>'CSS')) AND (((BrandID)<>'1356')) AND (((BrandID)<>'1400')) AND (((BrandID)<>'1551')) AND (((BrandID)<>'555')) AND (((BrandID)<>'66'))
AND (TransDate >= 07/01/2005) AND (TransDate <= 07/31/2005) GROUP BY SalespersonID
UNION
SELECT SalespersonID, Sum([SlsPrice]-[RtnPrice]-[SlsDiscnt]+[RtnDiscnt]) AS fldPrice FROM MyTable WHERE (((Source)='d') AND ((DistrictID)='01') AND ((ProductID) = '0029800')) AND (TransDate >= 07/01/2005) AND (TransDate <= 07/31/2005) GROUP BY SalespersonID
Set wrkJet = CreateWorkspace("", "pw", "", dbUseJet)
Set db = wrkJet.OpenDatabase("DW", _
dbDriverNoPrompt, True, _
"ODBC;DATABASE=DW;DSN=DW2")
'Set rs1 = db.OpenRecordset(strSQL)
View 9 Replies
View Related
Nov 20, 2013
I am wondering if there is a quicker way to export a query to excel then have the data in that query removed from the original table. (effectively cutting the data from the table and exporting to excel)
I understand that this can be done by exporting the query to excel then running the same query as a delete query to remove the data but I just wondered if this is the most efficient way.
I have experience of VB in excel but currently only use the basic macro builder in Access though if Access VB is more efficient I can easily learn.
View 5 Replies
View Related
Apr 2, 2013
I run a physical therapy office and patients come in for treatment either 3, 4 or 5 times per week. My database is used to track these frequencies (among other things).
I have 3 queries which count how many patients come in 5, 4 and 3 times/week.
In my main table I have fields called "how many 5's", "how many 4's" and "how many 3's".
I have tried to design an update query which will update those fileds in my main table to reflect the counts in the 3 queries mentioned above.
(I'm not using SQL view, I'm using the query design view)
In the "update to:" row, I use the Build function and locate the count I'm looking for.
Problem: when I run the query I get the error: Operation must use an updateable query.
View 3 Replies
View Related
Aug 12, 2015
I have a query where these are the fields:
ProductRevType
RevLag
RevFlowThru
CloseMoYr
ProjRevDate
CurrentMRC
ProjRevMRC
The ProjRevMRC field is an expression that reads:ProjRevMRC: IIf([ProjRevDate]>=DateSerial(Year(Date()),Month(Date()),1),[CurrentMRC]*[qry303a_ SFADetailMRC_ONLY]![Rev Flow Through],0)
When I run the query, it works perfectly, but when I created a crosstab query to show totals by month, I wanted the totals to be zero for the months less than the current month. Is there a way for the crosstab query to execute the expression and put zeroes for those months?
View 4 Replies
View Related
Jul 15, 2014
I have a field that is giving me the number of business days between a period of time and then I want to subtract that number - the person's PTO time to see the actual days they were available...when I simply type the number in (see below) it works great but I want to set up a prompt that will ask me how many PTO Days to calculate as it will be different for each person I am quering...is this possible?
View 9 Replies
View Related
Jul 23, 2015
I have a form which will be used as the basis to print a label.
It is bound to a query and when I open the form I pass over a 'where' condition to return 1 record. I then use the query to produce a report/label.
What I want to do is to update the form/query without updating the underlying tables to the query.
View 14 Replies
View Related
May 31, 2006
:confused:
I am trying to help someone with a complex problem (so it seems to me) but I will first ask about what should be a simple thing....
First goal: to COUNT the number of times a TYPE of visit is made.
There are several different TYPEs but only interested in tracking 2 of them.
When a crosstab query is created - if one of the 2 parameters are not "met", a blank is returned. I have been reading posts about using NZ and IIf IsNull, etc to get past that - but none of them make any sense to me and the Access help suggestions do not work. Hope someone can make it clear with this information: (can't give more specifics to keep privacy intact)
The SQL was written by Access not by me. :)
Here is an example of the Crosstab SQL (which is using a previous query):
TRANSFORM Count([qryTest2.TYPE]) AS CountOfTYPE
SELECT qryTest2.CID
FROM qryTest2
GROUP BY qryTest2.CID
PIVOT qryTest2.TYPE;
-----------
qryTest2 SQL: (Grouping by to remove dups)
SELECT DISTINCTROW tblM.CID, tblM.[M#], tblM.LNAME, tblM.FNAME, tblM.YMDBIRTH, tblC.ClDOS, tblC.TYPE
FROM tblM LEFT JOIN tblC ON tblM.[M#] = tblC.[M#]
GROUP BY tblM.CID, tblM.[M#], tblM.LNAME, tblM.FNAME, tblM.YMDBIRTH, tblC.ClDOS, tblC.TYPE
HAVING (((tblC.TYPE)="Out" Or (tblC.TYPE)="In"))
ORDER BY tblM.CID, tblM.LNAME, tblM.FNAME;
Thanks for you time! :)
View 1 Replies
View Related
Mar 8, 2005
I'm building a report for annual software license renewals. The report data source is a query that combines the customer information, their computer information, and the licenses purchased for that computer. I am having no trouble with the form displaying the customer info page, then a page with the computer info at the top and a list of licenses purchased for that computer underneath.
That would be great, if that's what my boss wanted. However, she wants the whole list of available licenses displayed on each page, in the event someone want to purchase additional licenses with this year's renewal.
I'm trying to figure out how I can set up a query/report grouping to do that. I've tried making a new query, relating the qryLicense!licenseID to the qryPurchase!purchLicense and setting the relationship option to show all records from qryLicense and only those related from qryPurchase. I added the qryPurchase!purchCPU field to my query, hidden it, and set the criteria to “=1” (the computer ID of one of my dummy computer records). I also have a Sum of the qryPurchase!purchQty field included in the new query that I want to display the total number of that particular license purchased (and 0 if there are no corresponding records). All fields except for the quantity field are set to Group By.
What I’m getting from this is simply a list of the licenses purchased for that computer, not the complete list of licenses available showing the quantity purchased where applicable.
Can someone see where I’m going wrong?
Slaughter
slaughter at mizzou dot edu
View 9 Replies
View Related
Oct 8, 2013
I am using an Access 2010 DB to keep track of a schedule. Essentially, at least one person needs to be signed up to work for every hour of every day in a week.
Tables:
Days with 7 records
Hours with 24 records
Workers with as many people that sign up to work the different hours
Schedule signifying the worker, day, and hour which are signed up.
As of now i have a query that relates these results and gives me a line detailing the worker/time information for the slots that are signed up for.What I'm TRYING to do is to create a query that gives me BLANK worker info when there is no one signed up for a particular hour.Currently my Schedule table has the following:
WorkerID | DayID | HourID
----------+---------+--------
1 | 5 | 12
4 | 5 | 13
16 | 5 | 15
What I'm looking to do is have this table matched up with another table (or query) that provides every combination of day/hour. When an day/hour combination is skipped, the query will be able to "fill in the blank" with a row. Like this:
WorkerID | DayID | HourID
----------+---------+--------
1 | 5 | 12
4 | 5 | 13
| | 14
16 | 5 | 15
View 2 Replies
View Related
Oct 1, 2014
I have a query with three sub queries, all returning a number from different tables. But when any one of the sub queries returns a blank, the entire main query is blank.
How do I stop this from happening? I have tried NZ() on the sub queries and on the main query, but the blank still happens.
View 1 Replies
View Related
Aug 12, 2014
I have a database which among other things records how jobs are received i.e.: Telephone, Email, Mail, Facsimile or Web.For each client I want to identify the percentages of each method of receipt against the total of jobs received and during different time periods.I have created a make table query for all jobs received between variable dates for a client entry of the name of the client and the start and finish dates are required to run the query.
I have a crosstab query set up to count each method of receipt and a final query to work out the percentages using the total from the crosstab query fields divided by the total of all methods.I have a macro set up to replace the table with new data when I want the stats for a different client between new dates, therefore the different methods of receipt may vary for the less active clients i.e.: they may only have telephone and email .
My problem is if I choose a client where we have not received a job by a particular method (say web or facsimile), the last query working out the percentages has fixed names to cover each method but naturally produces an error when it cannot find a corresponding method of receipt. I have experimented with NZ() without success.My question is can I either have preset standard names of the column field in a crosstab query? Alternatively in the query calculating the percentages, can I include code to ignore a non-existent field in the crosstab query.
View 9 Replies
View Related
Oct 18, 2005
Hi...
I have a query that when I run it normally (just click on it) then it runs fine. (It is a union query, getting it's data from 8 other queries (who has their dependancies)
But when I want to run a report from it, Access gives me an error saying "query is too complex".
I am flattered, but I would prefer access to work than say I write stuff that is too complex for it. :cool:
Any ideas?
I am confused by the fact that it runs when I double click the query, but the report bugs it out.
-Reenen
View 1 Replies
View Related
Sep 28, 2005
I am really stuck. I have spent two days searcinh different forums trying to solve my problem. I am trying to create an UPDATE q to my Access database. But I get either the: "Syntax error in query. Incomplete query clause" or "Syntax error in UPDATE query".
First of all here's the URL: www.innotec-as.no/login/Kunder
Login U/P either: "alfen" or "thomas".
The page opening up shows the user info, U/P and adress.
viewing the information is working perfectly - but editing it..no way.
When editing and submiting the data the above errors occour.
Try that and you'll also see the SQL I am trying to execute.
The CODE is as follows:
SQLtemp = "UPDATE 'Brukere' SET"
SQLtemp = SQLtemp & " 'navn' = '" & request("Navn") & "', "
SQLtemp = SQLtemp & " 'epst' = '" & request("Epst") & "', "
SQLtemp = SQLtemp & " 'Pass' = '" & request("Pass") & "', "
SQLtemp = SQLtemp & " 'Firma' = '" & request("Firma") & "', "
SQLtemp = SQLtemp & " 'BAdresse' = '" & request("BAdresse") & "', "
SQLtemp = SQLtemp & " 'BPostAdr' = '" & request("BPostAdr") & "', "
SQLtemp = SQLtemp & " 'PAdresse' = '" & request("PAdresse") & "', "
SQLtemp = SQLtemp & " 'PPostAdr' = '" & request("PPostAdr") & "', "
SQLtemp = SQLtemp & "WHERE 'Bnavn' = '" & request("Bnavn") & "'"
Response.Write(SQLtemp)
Response.End()
conn.Execute(SQLtemp)
rs.Update[/COLOR]
The finished SQL statement looks like this:
UPDATE 'Brukere' SET 'navn' = 'Alf Byman', 'epst' = 'alf@baccara.no', 'Pass' = 'alfen', 'Firma' = '', 'BAdresse' = '', 'BPostAdr' = '', 'PAdresse' = 'sdfg', 'PPostAdr' = '', WHERE 'Bnavn' = 'alfen'
I have tried to user single quotes, doubble quotes, brackets etc. nothing works.
The code I use for connection is as follows:
<!--#include file="../adovbs.inc"-->
<%
dim conn, rs, SQLtemp
' DSNless connection to Access Database
set conn = server.CreateObject ("ADODB.Connection")
rs="DRIVER={Microsoft Access Driver (*.mdb)}; "
rs=rs & "PWD=uralfjellet; DBQ=" & server.mappath("../../../../db/kunder.mdb")
conn.Open rs
I'll be very HAPPY for some expert help on this.
View 1 Replies
View Related
Sep 27, 2006
Hello, I have a combo box on a form which lists some names generated from a table.
I would like the selected name to be inputted into the 'critera' of another query called 'qryPBCustLevel' and for that query to be run.
I have tried to code this, but it is crashing at the point it trys to add the name into the query.
Can anyone help? Code listed below.
Sub cmbPB_AfterUpdate()
'Set the Dimensions of the Module
Dim strSQL As String, strOrder As String
Dim dbNm As Database
Dim qryDef As QueryDef
Set dbNm = CurrentDb()
'Constant Select statement for the Query definition
strSQL = "SELECT DISTINCT tblTempPB.PB_NAME" & _
"FROM tblTempPB"
strOrder = "tblTempPB.PB_NAME;"
' Find the record that matches the control.
Me.RecordsetClone.FindFirst "[PB_NAME] = '" & Me![cmbPB] & "'"
Me.Bookmark = Me.RecordsetClone.Bookmark
'Pass the QueryDef to the query
Set qryDef = dbNm.QueryDefs("qryPBCustLevel")
qryDef.SQL = strSQL & " " & strOrder
'Open the Query
DoCmd.OpenQuery "qryPBCustLevel", acViewNormal
End Sub
Thanks, Steve. :confused:
View 2 Replies
View Related
Nov 28, 2006
I am creating a database for a hyperthetical car hire company.
I have a field with a lookup/query. The data that this query searchs for is entered into my table/form already. Is there anyway of avoiding repeating this data twice?
Iain
View 2 Replies
View Related
Jan 3, 2008
Here's my problem. I need to generate a report that says how much of each individual product was produced and as well as the total produced for a specified category in a time period. Something like the following:
05 Catagory A: 02 Product AA, 01 Product AB, 02 Product AC
10 Category B: 07 Product BA, 03 Product BB
04 Category C: 01 Product CA, 01 Product CB, 01 Product CC, 01 Product CD
etc...
I currently have a query that queries a database and pulls out all products that were produced in a specified period and the categories they belong to and dump them into a local access table. Now what I need to do is search through the query results and count up how many of each product were produced (02 AA, 01 AB, etc...) and the totals for each category. The number of categories is pretty limited (6), but there are hundreds of product codes, so I need a way to do this without having to type in each induvidual product code as the requirement by which the query searches. Also, the product codes that get returned are different every day.
I was thinking something along the lines of take the product code of the first row and check for any others in the results that match and write that into another table. Then move onto row 2 and use its product code as a search parameter and search through the query results for any matches. Then continue that until the end of the query results. Can I do that? Is there a better way to achieve what I need?
View 7 Replies
View Related