[Enter oner1, such as m20] Or [Enter oner2, such as m20] Or [Enter oner3, such as m20] Or [Enter oner4, such as m20]
Basically, it pops up one window after another as you input your info.'
Then after the four pop ups it will go and retrieve the needed information.
It works great for me....
Is there a way for me to take this query script and if I leave one pop up blank it would just go and find what I put in without having to press
"enter" for the additional inputs that I did not want...
It's a pain when I increase this to 10 pop ups and one need one...
Example :
Lets say I only want to input two and then go
find the information.
right now I have to continue closing the pop ups until
I have cycled through all four and then it will go.
I want to eliminate the additional ones.
I'm not a genius at this so please make it as easy as you
can if you have any ideas....
I'm trying to run a UNION query that joins five queries through a MS WorkSpace into a DAO.recordset in VB. I'm pulling the data from a SQL Server Database through VB in Access. I'm attempting to open a recordset with a query passed to it as a string. The query is below. For some reason, I'm receiving a message: "MS Jet database engine cannot find the input table or query. Runtime Error 3078".
Here's what's puzzling. When I run a single query without any UNION statement, the code finds the table and runs fine without error, but anytime I join two or more queries with a UNION statement in the VB, it gives me the error.
I've executed the same UNION query in both Access Query Builder and SQL Server's Query Analyzer and they work fine in both environments. It's only when I call the query from a DAO.Recodset with VB that it causes this problem. The following is a sample of the UNION query joining two of the five queries. Does anyone have any idea what could be the problem? The following query executes in about 5 seconds so I don't think there's a "time-out" issue. I'm thinking that the UNION statement may be the culprit. Maybe there's another way to approach joining these separate queries? Any help would be most appreciated. Thanks.
SELECT SalespersonID, Sum([SlsPrice]-[RtnPrice]-[SlsDiscnt]+[RtnDiscnt]) AS fldPrice FROM MyTable WHERE (((Source)='d') AND ((DistrictID)='01') AND ((CategoryID) = 'HCPROD') AND ((BrandID)<>'CSS')) AND (((BrandID)<>'1356')) AND (((BrandID)<>'1400')) AND (((BrandID)<>'1551')) AND (((BrandID)<>'555')) AND (((BrandID)<>'66')) AND (TransDate >= 07/01/2005) AND (TransDate <= 07/31/2005) GROUP BY SalespersonID UNION SELECT SalespersonID, Sum([SlsPrice]-[RtnPrice]-[SlsDiscnt]+[RtnDiscnt]) AS fldPrice FROM MyTable WHERE (((Source)='d') AND ((DistrictID)='01') AND ((ProductID) = '0029800')) AND (TransDate >= 07/01/2005) AND (TransDate <= 07/31/2005) GROUP BY SalespersonID
Set wrkJet = CreateWorkspace("", "pw", "", dbUseJet) Set db = wrkJet.OpenDatabase("DW", _ dbDriverNoPrompt, True, _ "ODBC;DATABASE=DW;DSN=DW2") 'Set rs1 = db.OpenRecordset(strSQL)
I need to create a field in an input form that is simply the concatenation of two other text fields. I have tried all sorts of things, but when I look at the data in the table that field.
I have a field called ID that I want to be created like this:
=Format([UniqueID],"00000") & "-" & [Mosque]
This works well in my output fields, but does not work the same way on the input form. It needs to be based on the currently input values from the current record. Anyone have any ideas?
All I'm trying to do is a make table (table name to overwrite: "TBL_5_7_RFCs") query via VBA so I can loop through a set of VARs in a table. Here is my code:
Code:
Public Function test_sql() Dim Conn As ADODB.Connection Dim RS As New ADODB.Recordset Dim MySQL As String Set Conn = CurrentProject.Connection RS.ActiveConnection = Conn
[code]...
I'll add the loop and array once I get this working but I'm stuck.
I need to be able to query the service dates for the bill. So I can query 1509 for the .billYYMM and .readdate and it will give me the TO Date. How do I in the same query tell the query to subtract 1 from the BillYYMM that I just entered and give me the read date for that field in that query? So Query 1 MBRHISTDETL.BILLMOYR and in the criteria box use [Enter the Bill Month Year YYMM you want to search for] will allow me to run the query at any time for any bill month year that I enter. So another field in that query is MBRHISTDETL.READDATE. So to get the FROM date and the TO date i need the following MRBHISTDETL.BILLMOYR (whatever I enter as input) and MBRHISTDETL.READDATE that corresponds and then I need [MRBHISTDETL.BILLMOYR]-1 and MBRHISTDETL.READDATE. The first gives me the TO date and the 2nd gives me the FROM date?
I am looking for the vba to have a query cycle through using records from another query as the parameter run and export for each of the records on the second query.
Table 1 has information with all clients query 1 has x, y, z being pulled > client used as parameter query 2 has the list of clients
Currently I have the coding to run the query and export however I am not sure how to get it to repeat for each client.
Code: Private Sub CmdInternalReports_Click() Dim xlApp As Excel.Application Dim rstDetails As DAO.Recordset Dim strTab As String Dim strDir As String Set xlApp = Nothing Set rstDetails = Nothing
[code]...
There can be upto 70 different clients or as little as 2 depending on the day. So the Query I have takes a list of the clients that receive the report and runs it against the imported table to only give the ones with data day.
PHP Code:
tblClientReport.Distro
Is where I have the report via client name linked the the distro list that should be pulled.
I have an InputBox date box created in a query, How would i change the title of the input box from "Enter parameter value" to "Works order Import selection". iS IT POSSIBLE
i got a input query problem ! If input a Product model LU20XT-1V25DM , the report should list all the parts which need to assemble this model , and the problem is there are tables in this database , Finding LU in table 1 , 20 in table 2, Xin table 3, DM in table 10, something like that . so input LU20XT-1V25DM , THE Result should like this : No CODE DESCRIPTION SPEC QTY
Can someone clue me in on this? I have a query that links a bunch of tables how can I get a form to show all these fields and input new data. In the past I could always look at data but never add. Is there anyway to do this. I have added the database just in case in need to see what I was talking about.
I have a query which is pulling its data from a form, which in turn is pulling data from a table. When I select 0.82 on my form, my query runs fine. But when I select 0.826856 from my form the query does not return any result.
0.826856 is available in the table and the pull down list in the form. The data format for all my table, form and query is General and decimal places is set to 8.
Could you plz tell me why I am not able to run the query using 0.826856 ????
I am trying to produce a query that will search for multiple records by job id entered into a text box eg 17656,18768,15679.
The example i have found uses the (LIKE '*value*') so if i type in part of a job id (176) it will display all records starting with 176. I would like to enter specific job id numbers seperated by a , and only display these
Is it possible to customise the input form for a query. At present I have to type in a start and end date manually, it would be far easier to use a popup calendar to select dates. I also have another query that requires you to type in a username, it would be preferential to have a drop down list to select a name from.
Are either of these things possible? or will I need to create a form that calls the query and passes the relevant data?
How do you allow a user to enter a value in a form; have access set that inputted value to a criteria in a query? Then ill have a button to run the query which i can do
I am not a programmer and I don't know VBA/VB. I am using this as a workaround to avoid VBA functions (since I don't know them). I can't seem to find a simple? solution to this. I have a query that does a radial search in decimal degrees. I have created an unbound form as a dialogue box that converts degrees-minutes-seconds to decimal degrees and displays the results in a calculated text box. What I want to do is have the query take the results in the calculated text box as its parameters (along with a third parameter- distance) without prompting the user. How do I get the query to take its results from the fields on the form? I have tried Like [Forms]![frmName]![SearchValue], but I can't seem to make it work.
I am building a mortgage/amortization database and I need to look up the "points paid" from another table and also the "adjustment to margin" based on the points paid and the index, "MTA" or "COFI". I have no idea how or where to write this lookup. Any suggestions?
The query below is supposed to accept some characters from the user and bring up a list of records satisfying the criteria. TelephoneAAA is a table with many columns. The query does not give any error message receives input from user runs quietly and does not give any result. I know that the table contains sufficient data. Probably I am missing something obvious but what.
Code: RowSourceQy = " SELECT * from [TelephoneAAA] " & _ "WHERE (([TelephoneAAA].[SOYADI]) Like ((' * ')+ [Word] +(' * '))) OR " & _ "(([TelephoneAAA].[ADI]) Like ((' * ')+[Word]+(' * '))) OR " & _ "(([TelephoneAAA].[ADRES]) Like ((' * ')+[Word]+(' * ')))" & _ "ORDER BY [TelephoneAAA].[SOYADI], [TelephoneAAA].[ADI], [TelephoneAAA].[TEL];"
I am trying to use a combobox to select a value which then activates a query to return results.
Here is some details
I have to tables, one called "Customers" and the other called "Calls". These two tables are linked.
The customers is literally a list of customers with their contact details, but all I am in interested in is the "Company" Field.
The Calls table has a field called "End User" which looks up the company from the Customers Table.
What I am trying to do is create a search by Customer query, furthermore, I would like to do is to create a form with a drop down that looks up from Customers table, select the company and it returns all the records with that company...
What I have done
I have created a query that has the customer and calls tables included, I have dragged down the [Company] from customer table and then all the fields from the Calls table.
Then i created a blank form, inserted a combobox - Combo7, linked the box to the Customers table.
Back to the query, under the [Company] I have put into the criteria the following
Forms!sc!Combo7
Back to the form, selected the combo box, built a macro in the AfterUpdate, to run the query.
Tested this and it does not bring anything back, however if I put into the criteria Like [Please Enter Company Name], then typed the company name, it brings back all the records for that customer.
Am I missing something?, do I need to set the form control to the query, or even the combobox....
We have employee dates of birth in our database. For a birthday gift exchange program, I want to generate a query that returns only the day and the month of the employee birthday (to placate those employees who wish not to disclose their exact age). I'm struggling with making a custom date input mask that will do this.
I have a database that has several tables, each table has account numbers in them. I also have queries set for each table to bring in desired information. Is it possible to set up a form so the user can input an account number and depending on which table the account number is in, that query will run?
Based on information from a earlier thread.... I created a Union query that pulls information from multiple tables and fields.
SELECT AG_B_R1 as Num FROM dbo_ADC_Ag_B_Res WHERE Rollnmbr=[roll] UNION ALL SELECT AG_B_R2 FROM dbo_ADC_Ag_B_Res WHERE Rollnmbr=[roll] UNION ALL SELECT AG_B_R3 FROM dbo_ADC_Ag_B_Res WHERE Rollnmbr=[roll] UNION ALL SELECT AG_B_R4 FROM dbo_ADC_Ag_B_Res WHERE Rollnmbr=[roll] UNION ALL SELECT AG_m_R1 FROM dbo_ADC_Ag_m_Res WHERE Rollnmbr=[roll] UNION ALL SELECT AG_m_R2 FROM dbo_ADC_Ag_m_Res WHERE Rollnmbr=[roll] UNION ALL SELECT AG_m_R3 FROM dbo_ADC_Ag_m_Res WHERE Rollnmbr=[roll] UNION ALL SELECT AG_m_R4 FROM dbo_ADC_Ag_m_Res WHERE Rollnmbr=[roll] UNION ALL SELECT AG_e_R1 FROM dbo_ADC_Ag_e_Res WHERE Rollnmbr=[roll] UNION ALL SELECT AG_e_R2 FROM dbo_ADC_Ag_e_Res WHERE Rollnmbr=[roll] UNION ALL SELECT AG_e_R3 FROM dbo_ADC_Ag_e_Res WHERE Rollnmbr=[roll] UNION ALL SELECT AG_e_R4 FROM dbo_ADC_Ag_e_Res WHERE Rollnmbr=[roll];
And then I created another query to get the STDEV of the above query
SELECT StDev([Num]) AS StDev FROM Q_cals_ag_bme_STDEV_Union;
The result will be on a subform on my main page. How do I get my form to input the [roll] automatically and requery the subform, showing my result. Thanks
FTA # Date Attended Last name First name assigned person......
Each week I need to generate a report that shows the people that attended for that week, grouped by the assigned person. I only want to show the data for a specific "date attended" (i.e. that days date). I figured I first need to generate a query that only returns the data for that specific date in the "date attended" column. I did that but it is manuel by using the criteria field.
Is there an easy way to type in the date that I want the query to use as the criteria?
Hi all. Stumbled onto this forum during a google search.. looks like a great forum.
I have a question. this thread http://www.access-programmers.co.uk/forums/showthread.php?t=124689
goes into a simple function to group by the name and add their total.. however what i need to do is that plus have a user input of the date.
eg of the table
Date Title Invoice 02/02/07 ABC123 11.00 02/02/07 ABC123 12.50 02/02/07 DEC123 11.50 03/02/07 ABC123 10.50
What i need is a paramater query to be able to work to give me the total of the groups.. Whenever i try to join my Parameter query with my sum query it gets messed up..
heres the code... what am i doing wrong?.. What i want displayed after they input the date is the group by and sum total of the parameter query..
SELECT RawData_tbl.[Title 2], RawData_tbl.[Estimated Value], RawData_tbl.[Date In], RawData_tbl.Quote, RawData_tbl.GST, Sum(RawData_tbl.Invoice) AS SumOfInvoice FROM RawData_tbl GROUP BY RawData_tbl.[Title 2], RawData_tbl.[Estimated Value], RawData_tbl.[Date In], RawData_tbl.Quote, RawData_tbl.GST HAVING (((RawData_tbl.[Date In]) Between [Please Type the first day of the month] And [ Please insert the last day of the month])) ORDER BY RawData_tbl.[Title 2];
I have been asked to create a database in Access 2000 that will hold 1.6 million postcodes. There will be four fields within the a table one holding the postcodes, and three fields holding information as to whether or not the post code is classed as good, neutral or bad. The requirements are to allow a user to run a query that asks thenm for the required postcode and then displays the relevant information (good,bad,neutral).
There requirement is that the search is done as fast as possible returning the required results. Has anybody got any ideas as to the best way of doing this.
My form contains the field Bill_Date, which may or may not be input during data entry. What I need is to run a query (I think) that allows me to input a specific date that will automatically populate all Bill_Date fields that are currently null with the date specified. Eventually this will end up on the front end where a biller will click on a link when they open the db, input the date into the field, and then process another report.
I have absolutely no idea how to even begin and was not able to locate any specific information in Help or here on the forum.
