How Can I Do Summation To Time Type Field??
Jan 17, 2007
hi,
I have atable with fields time in and time out (short time type), in aquery i did a diffrence between that to fields, so I can know to evry employee every day how many hours work.
but, my problem is how do summation to the work hours to the month (it's a short time type).
example, an employee work from 8:30 to 15:00 in the first day, second day work from 9:10 to 14:20 ....etc
at the end of the month i want to have report from query which give me sum. of hours the employee workes.
thanks to help me
suhad
View Replies
ADVERTISEMENT
May 6, 2015
how to be able to enter time in access form the same way as if would be an access table (1p = 1:00 PM; 1.25 = 1:25 AM etc)
View 1 Replies
View Related
Jan 14, 2007
Hello,
I have a dataset that consists of Stands within a forest inventory. There are two Fields: the first field is StandValue (dollars), the other field is the StandArea( hectares).
I want to select the highest valued stands BUT the sum of the individual areas found in "standArea" cant exceed 10,000 hectares. Can anyone help me figure out an SQL query for this, or any other suggestions on how to proceed would be greatly appreciated, thanks
Greg
View 2 Replies
View Related
Oct 25, 2007
I am having problems with this query:
DELETE * FROM [TableOfTrainees] WHERE [TableOfTrainees].[CurrentYearTrainingDate]="" AND [TableOfTrainees].[LastYearsTrainingDate]="";
When I try to run it, an error points to the criteria.
Both CurrentYearTrainingDate and LastYearsTrainingDate are Date/Time format.
I need to be able to check if those fields have a date in them or are blank ("", IsNull and IsEmpty do not seem to work).
Any ideas are deeply appreciated -- thanks ahead of time!
View 1 Replies
View Related
Apr 12, 2006
I don't understand why I'm getting this message.
I have a form that is based on a parameter query. The user inputs an item number and the form opens in edit mode. The user clicks the "duplicate" command button and then changes the item number. I've incorporated GHudson's "A Better Mouse Trap" logic and when clicking "save" I get the type mismatch error.
I don't understand why Access is not returning the 3022 duplicate entry error.
When I click "debug" Access highlights the line as shown below:
Err_bSave_Click:
If Err = 2046 Then 'The command or action Undo is not available now
Exit Sub
Else
MsgBox Err.Number, Err.Description
Resume Exit_bSave_Click
End If
End Sub
Any and all assistance is appreciated.
Randy
View 6 Replies
View Related
Mar 16, 2005
I created a Duplicate command/macro on a form and, when it is clicked on, a message appeared 'Run-time error '13' Type mismatch'. Debugging the command showed the problem was this code line:
MsgBox Err.Number, Err.Description
in the bDuplicateCurrentRecord section (shown below).
Below is the whole Duplicate coding. The coding was copied from another Duplicate template db as I am no expert on coding. It worked on 97 version but not on 2000 version.
Private Sub bDuplicateCurrentRecord_Click()
On Error GoTo Err_bDuplicateCurrentRecord_Click
Beep
Dim sBookingID As String
Dim sSerialNo As String
Dim sNameOfHost As String
Dim sTrustOrNonTrust As String
Dim sDepartment As String
Dim sContactTelephone As String
Dim sContactMobile As String
Dim sContactFax As String
Dim sDateOfRequest As String
Dim sDateOfFunction As String
Dim sTimeRequiredStart As String
Dim sTimeRequiredEnd As String
Dim sVenue As String
Dim sReasonForBooking As String
Dim sNoOfGuests As String
Dim sStandingOrder As String
Dim sComments As String
Dim sBookingReceivedBy As String
Dim sNonStandardCharge As String
Dim sTrustTotalCost As String
Dim sNonTrustTotalCost As String
Dim sWhenPaymentMade As String
Dim sPaymentMethod As String
sBookingID = BookingID
sSerialNo = SerialNo
sNameOfHost = NameOfHost
sTrustOrNonTrust = TrustOrNonTrust
sDepartment = Department
sContactTelephone = ContactTelephone
sContactMobile = ContactMobile
sContactFax = ContactFax
sDateOfRequest = DateOfRequest
sDateOfFunction = DateOfFunction
sTimeRequiredStart = TimeRequiredStart
sTimeRequiredEnd = TimeRequiredEnd
sVenue = Venue
sReasonForBooking = ReasonForBooking
sNoOfGuests = NoOfGuests
sStandingOrder = StandingOrder
sComments = Comments
sBookingReceivedBy = BookingReceivedBy
sNonStandardCharge = NonStandardCharge
sTrustTotalCost = TrustTotalCost
sNonTrustTotalCost = NonTrustTotalCost
sWhenPaymentMade = WhenPaymentMade
sPaymentMethod = PaymentMethod
DoCmd.GoToRecord , , acNewRec
BookingID = sBookingID
SerialNo = sSerialNo
NameOfHost = sNameOfHost
TrustOrNonTrust = sTrustOrNonTrust
Department = sDepartment
ContactTelephone = sContactTelephone
ContactMobile = sContactMobile
ContactFax = sContactFax
DateOfRequest = sDateOfRequest
DateOfFunction = sDateOfFunction
TimeRequiredStart = sTimeRequiredStart
TimeRequiredEnd = sTimeRequiredEnd
Venue = sVenue
ReasonForBooking = sReasonForBooking
NoOfGuests = sNoOfGuests
StandingOrder = sStandingOrder
Comments = sComments
BookingReceivedBy = sBookingReceivedBy
NonStandardCharge = sNonStandardCharge
TrustTotalCost = sTrustTotalCost
NonTrustTotalCost = sNonTrustTotalCost
WhenPaymentMade = sWhenPaymentMade
PaymentMethod = sPaymentMethod
sBookingID = ""
sSerialNo = ""
sNameOfHost = ""
sTrustOrNonTrust = ""
sDepartment = ""
sContactTelephone = ""
sContactMobile = ""
sContactFax = ""
sDateOfRequest = ""
sDateOfFunction = ""
sTimeRequiredStart = ""
sTimeRequiredEnd = ""
sVenue = ""
sReasonForBooking = ""
sNoOfGuests = ""
sStandingOrder = ""
sComments = ""
sBookingReceivedBy = ""
sNonStandardCharge = ""
sTrustTotalCost = ""
sNonTrustTotalCost = ""
sWhenPaymentMade = ""
sPaymentMethod = ""
Exit_bDuplicateCurrentRecord_Click:
Exit Sub
Err_bDuplicateCurrentRecord_Click:
If Err = 94 Then 'Invalid use of Null'
Beep
MsgBox "A box is incomplete. Please ensure that all boxes are completed before attempting to duplicate the current booking.", vbInformation, "Invalid Duplication"
Exit Sub
ElseIf Err = 2113 Then 'The data you entered is not valid for this box.
Exit Sub
Else
MsgBox Err.Number, Err.Description
Resume Exit_bDuplicateCurrentRecord_Click
End If
End Sub
Private Sub bDeleteCurrentRecord_Click()
On Error GoToErr_bDeleteCurrentRecord_Click
Beep
If MsgBox("Are you sure you want to delete the current record?", vbQuestion + vbYesNo, "Delete Current Record?") = vbYes Then
DoCmd.RunCommand ac CmdDeleteRecord
End If
Exit_bDuplicateCurrentRecord_Click:
Exit Sub
Err_bDeleteCurrentRecord_Click:
If Err=2501 The 'The RunCommand action was cancelled
Exit Sub
Else
MsgBox Err.Number, Err.Description
Resume Exit_bDeleteCurrentRecord_Click
End If
End Sub
Can anyone help?
Thanks.
Paul
View 6 Replies
View Related
Jan 4, 2005
Hello all - One of my 3 users' computers keeps coming up with an error when I try to enter the following command in the "Validation Rule" field of the table design view:
>=#1/1/1998# And <=Date()
Some investigative work showed that it's erroring on this clause: "<=Date()". Any idea why it would error on her pc and not the other 2 pc's? Her pc is old, but we're all using Access 2002. The error says: "The function you entered can't be used in this expression." Any thoughts would be helpful. Thanks much.
Dan
View 3 Replies
View Related
Feb 3, 2015
I have a field [CurrentDay] of type Date/Time. The values for this field are entered through the selection from the date picker. However the time of the day always come along with the date - even if it is not seen. This creates a huge problem when making a query based on this field because no results will be returned unless the time is included with the date in the criteria.
The other part to the problem is that I cannot find a built in function in the expression builder to generate the current date without appending the time - now() certainly does not do that - even if the time is not seen it is there.
View 3 Replies
View Related
Oct 12, 2013
I need to restrict data input to the following: "09:00" Or "11:00" Or "13:30" Or "15:30"
This rule works when the data type is set to text, but not on Date/Time with short date set as format
How to get a Date/Time type to accept only one from these four values.
View 2 Replies
View Related
Oct 12, 2013
I need to restrict data input to the following: "09:00" Or "11:00" Or "13:30" Or "15:30"
This rule works when the data type is set to text, but not on Date/Time with short date set as format
get a Date/Time type to accept only one from these four values.
View 4 Replies
View Related
Jul 6, 2013
I have a date/time field. I would like to:
Enter time this way and have it show in the form as:
Enter 5 - show 5 PM
Enter 515 - show 5:15 PM
etc.
I would like it to default to PM and not have to select or enter the PM. How do I enter this format in the table?
View 5 Replies
View Related
Jun 7, 2007
Hello Mdb Gurus,
I have a huge database but this is only a sample. Basically, I want to combine the monthly_qty, annual_qty_used and months_of_use for the similar Part-Numbers (ie. with or without the 'W' suffix). Example, part numbers 0010-20524 and 0010-20524W should be treated as alike.
The Table 'wrong_outcome' generated from the saved query would not be able to handle this kind of situation. The correct Table should be exactly like the one I created: 'should-be_outcome' but I have no least idea how to query this. Can someone help me with a query or SQL.
Any help is very much appreciated. Many thanks.
View 8 Replies
View Related
Mar 20, 2007
Hi,
I've found this board very helpful in the past and was hoping someone would be kind enough to help me out again. I have a problem similar to the one below:
I have a table which tells the supplier we ordered from and number of each of the 5 types of fruits my store orders from the particular supplier(apples,oranges,pears,etc). Those are my 5 columns.
I need to create a sixth column which I will call 'Multiple Types' in order to tell if we ordered more than one type of fruit from that particular supplier(and how many total fruits). Therefore, the following condition has to be met: If two or more of the five columns is greater than 0, I need this sixth column to sum the values of all the 5 columns(thereby giving me the sum of all the fruits ordered from that supplier). If this condition is not met, I need the column to be equal to zero.
Do you have any ideas how I might accomplish this task?
Thank you all for your time.
View 1 Replies
View Related
Jun 27, 2013
I have a variable (dtDueDate as Date) showing as 6/28/2013. I want to append a time value to it (dtMaxTime as Date) which is 5:00 PM so dtDueDate reads 6/28/2013 05:00:00 PM. I have been going in circles trying to figure this out. My goal is to append this date to a table field which has a datetime (General Date).
View 6 Replies
View Related
Aug 11, 2014
I am getting Run-time error '3464': Data type mismatch in criteria expression when i execute the code:
Option Compare Database
Dim rst As DAO.Recordset
Dim rst1 As DAO.Recordset
Public verificacoes As Boolean
[code]....
View 5 Replies
View Related
Sep 29, 2014
I would like to create a combo box (or something similiar if a combo box simply can't do it) where the list of choices in the pulldown shows only the matches of what a user types in. The list of choices are coming from a field in a table. Also I would like the "search" of the user's input to include what is "within" each choice, e.g. if a user type "ber", then valid results should be bertha, october, robert.
View 1 Replies
View Related
Aug 29, 2007
hello all,
i stumbled upon this site via google while i was trying to find a solution to my problems! i'm a pretty proficient pl/sql writer and this is my first time trying to learn jet sql so a lot of the things i'm used to in pl/sql can't be done in jet sql!
1) i'm trying to create a summary record from RR_FT_COMPONENT to RR_FT_TOT_PAYOUT. this is basically summing some payout fields by grouping by payee_id and period_id. from my research i've seen that jet sql doesn't like sum or group by's for updates. is it the same for doing select statements for insert into?
when i run the query i get the following error: "ms access can't append all the records in the append query. MS access set 0 fields to null due to a type conversion failure"
all of the fields on both tables have the same type. is this a group by and sum problem? i ran the select statement separately and it worked fine.
code:
INSERT INTO RR_FT_TOT_PAYOUT ( market, region, financial_center, payee_id, employee_name, manager_flg, lic_code, job_code, period_id, volume, cp_spread, ytd_spread, cp_comm, ytd_comm, prior_yr_flag )
SELECT max(rc.market), max(rc.region), max(rc.financial_center), rc.payee_id, max(rc.employee_name), max(rc.manager_flg), max(rc.lic_code), max(rc.job_code), rc.period_id, sum(rc.volume), sum(rc.cp_spread), sum(rc.ytd_spread), sum(cp_comm), sum(ytd_comm), max(prior_yr_flag)
FROM RR_FT_COMPONENT AS RC
GROUP BY rc.payee_id, rc.period_id;
2) in this next code i'm trying to sum spread information in the ft_txn_summary table for a given payee_id, market and period_id. i'm using dsum and have the appropriate joins to keys on the tables, yet this update sums ALL records in the ft_txn_summary table rather than summing the specific payees in the join. any idea on what's wrong or how to debug dsums?
code:
UPDATE rr_ft_component AS rc SET rc.cp_spread = Dsum("txn_spread","ft_txn_summary","ft_txn_summary.payee_id= " & [rc.payee_id] AND "ft_txn_summary.market= " & [rc.market] AND "ft_txn_summary.period_id= " & [rc.period_id])
WHERE rc.component_name='Total Revenue';
any help would be appreciated! thank you!
View 1 Replies
View Related
Dec 23, 2013
How can I bind a textbox to summation query's value? I tried the formula builder and this did not work:
=[qryAutoMatchSum]![SumField]
View 1 Replies
View Related
May 24, 2013
Quick summary (See Attached)
Data is stored in 11 tables each with matching primary key. Each table has in the range of 20 fields of which only numbered data type are being used in calculations.
Each Data table has 3 augmenting queries. All these queries work individually.
Summarizing query "QStationCountList_Sum" works fine.
Calculating a summation score by each "Master_PS_ID" works fine if I only try to summarize data by 3 of the calculating queries. As you can see in the attached database "QStationTotalScore1_6" query based on 6 gives "Too many fields defined". (I have tried so many fixes I can not remember and received messages such as "To Complex") While a similar query on 3 works fine.
At this juncture I plan to build 4 new partial sum queries each from 3 collecting queries and then build a 5 Summation query adding the results from the Sum queries. Surely there is a better way.
View 3 Replies
View Related
Nov 5, 2013
I have a form that users can input data into and based on that data it runs a query and generates a report. These reports can be different based on user entered data on the form. My issue is within the report I would like to sum certain fields. The problem with trying to sum theses fields is that they show up on each row so I have hidden duplicates but when trying to sum the field it still trys to count the hidden duplicates thus giving a value that is of no use.
I have tried many methods to sum but one of the problems I continue to run into when I create a text box and build an equation and reference the field I would like to sum is when the report runs it is asking for a value to be entered for the field I am attempting to sum. I shouldn't need to enter a value as I am trying to obtain the value.
View 13 Replies
View Related
Nov 3, 2012
From a table I want a text field which has a path to a file to be copied automatically into a another field of the same table with a hyperlink text type...
View 5 Replies
View Related
Aug 29, 2013
I have a date/time text field on a form with the General Date format and a combo box next to it that has sequencial times as the row source (IE. 12:45 AM, 1:00 AM, 1:15 AM, 1:30 AM, ETC.) When the user chooses a time in the combo box, I want the time portion of the text box to be updated with the chosen time in the combo. I have tried a few things but cant seem to get it right.
View 4 Replies
View Related
Mar 6, 2007
Hi,
Wonder if someone can help please. I'm quite new to Access so please bear with me.
I have a data field in my database consisting of both a date and time.
I then have a form containing two fields where the user can type a 'To' and 'From' date to extract the records that they are interested in. The query behind this uses the 'Between[Enter The Date] And [Enter The Date]' coding.
The problem is that because the field contains a time it doesn't return any records when I run the query.
Can anyone offer a bit of guidance on how I could ignore the time part of the field perhaps by adapting the above.
Many thanks
Chris
View 2 Replies
View Related
Mar 19, 2014
I have a column/field named [DateTaken] which contains test dates and times in the same cell. I am needing to find those with a test time less than 2:30 pm or <14:30pm.
data looks like this:
8/22/13 4:23 PM
1/29/14 12:21 PM
1/28/14 3:27 PM
8/26/13 4:27 PM
[code]....
this is what I have come up with to extract the time component of data set so that I can then later, sort it by the time in a query.
JustTime: TimeValue([YourField])
JustTime: ("hh:mm",([DateTaken])) and or ("hh:mm",[DateTaken])
I get either invalid operator or invalid syntax errors trying both of these.
View 5 Replies
View Related
Sep 29, 2005
I have a field defined with a Yes/No type. When it appears on the form instead of showing up with a Box with a checkmark, it shows up as -1 or 0. Any thoughts as to what could be the problem ?
Thanks.
View 7 Replies
View Related
Jun 29, 2007
hello people, i wanted to add a string at the end of a long column of Currency. Is there any to to change only the last field to a string or do i have to change the whole column just for the last field?
View 2 Replies
View Related
