I`m using access 2010 version, i have one table(Customer) which has one-to-many relationship to the table(Order), so the Order table contains many records from one single record in Customer. How to create a combobox that filter and show how many orders the Customer has. Example:
Table(Customer)
Line 1 - Crystal
Table(Order)
Line 1 - Water
Line 2 - Cookies
Line 3 - Pens
I have a form and a subform with a master/child relationship set based on the primary key of each underlying table. All good there.Now, I want to use VBA to create a filter based on a set of inputs via combo boxes. But the filter must filter both the Parent and Child records.Example. "Show me only records where both only the Parent.Field1 = "string" and Child.Field = "string".I can do this in a QRY as follows:
SELECT Projects.[Project Number], Lessons.[Actions Resolved]
FROM Projects INNER JOIN Lessons ON Projects.ProjectsRecordID = Lessons.ProjectsRecordID
WHERE (((Projects.[Project Number])="AU-2102421") AND ((Lessons.[Actions Resolved])=True));
But, if I make this as a record source for the Parent Form, then the records in the Parent Form are repeated for each individual record in the Child form.
How can I create a "Filter Button" on a form and filter my records? I create a textbox on a form and a filter button on the right. Then I click the filter futton, the filter function will search/match the content in the box through the datasheet. And then the results of the filtering will be pop up on the split form datasheet.
View 3 Replies View RelatedI have seen a few articles here and there on using a combo box to filter records in a sub-form and to filter records in another combo box, but I am not getting anywhere. I hope someone can belp
Exercise 1
For this exercise, I have the following tables:
tblClients containing client names
tblProjects containing some project details
I want to set up a simple form, so that the user can select a client name from a combo box on the main form which filters the project detail records in the Projects sub-form.
Once the user enters project details, I want this info as well as the selected ClientID to be fed back to tblProjects.
Exercise 2
I have the following tables:
tblProjects as above
tblWorkstream containiig names of workstreams and some other details.
Every project has one or more workstreams
I have a form where users will enter hours worked on each workstream. They will first select Project from a combo box on the main form. This should then filter records to be displayed in the Workstream Combo box, before they can then enter hours.
Please let me know if you need me to explain any part of this better.
Thanks in advance.
ps. I am a novice, so I'm hoping to do the above using default MS stuff, not with complex programming!!!
Thanks
i have a table with three column Named
1-State
2-City
3-Customer
on a form i m placing 3 combo box for each column how can i filter combo 2 from table after select value from combo 1
I'm having a little difficulty setting up a combo box to filter another combo box. I've actually got one working but the second one is giving me all sorts of errors. On the attached database, there's a form called frmAddNewRecord. At the top of the form there's a combo box which allows you to select a name and another combo box beside it which acts as a filter so only names from a certain section are shown (working fine).
The subform which is attached to this form and contains the training details, has another combo box which allows you to select a job...I've tried to add a combo box beside this to filter it but I can't get it to work.
what's the problem of the code below?
I want to create a filter with more than 2 criteria
Me.FilterOn = True
Me.Filter = "[YEARS] = " & Ycode & "[years] ="&Ycode& "[months]="&Mcode& "AND[POScode] = " & Pcode
I use the following xml to create a ribbon for Sort and Filter
Code:
<customUI xmlns="http://schemas.microsoft.com/office/2006/01/customui">
<ribbon startFromScratch="true">
<tabs>
<tab idMso="TabCreate" visible="false" />
<tab id="dbSearchtab" label="Sort and Filter" visible="true">
<group id="SearchScreenSort" label="Sort and Filter">
[code]....
The first problem is that this ribbon appears in forms where it is not included.The second problem is that in addition to the "File and Filter" tab, there appears a "File" tab Whe you click on it is goes backstage allowing you to Print and Exit.
I have two fields [InReview] and [TestReviewed].I'm trying to create a filter in the Onclick event of a button like so:
Code:
Me.Filter = "InReview Is Not Null" & "TestReviewed Is Not Null"
Me.FilterOn = true
This is not working for some reason. What is the correct way to concatenate a filter in VBA?
I've got a hopefully an easy question - how to create a form filter? I've got a form with a subform. Form is showing all records from a table, but some records on the subform are blank. I want to create a filter which will eliminate any record from the form where there is nothing to show in the subform.
View 8 Replies View RelatedI'm trying to make a query to filter or show only those customers when it is the time for their monthly payment.The query I have consists of four fields which are
1- Order ID
2- Payment
3- Date (Default value set to Date ())
4- Date for next time Payment (Default value set to date () + 30)
I made another field called "states". In this field I putted the following expression
Code:
IIf(([Date for next time Payment]-Date())= 0 "Should Pay";" ")
Then, I set the criteria for such field to "should pay" so that only customer "should pay" will appear in the query datasheet. However, this method has the following shortcomings:
1- It works only for one day (alert day) ,i.e., customers will filtered only when the expression is true.
2- Customers who have paid will still appear as a "should pay" until the day (the day that make the expression true) finish.
3- Customers whose pay late (maybe after 1 week) will disappear form the query datasheet after alert day finish.
To overcome the above shortcomings, i modified the expression to
Code:
IIf(([Date for next time Payment]-Date())<-1 And ([Date for next time Payment]-Date())>-15;"Should Pay";" ")
This method will extend the alert duration to 15 days, so the customers who haven't pay yet will appear in the query datasheet for 15 days. However, the customers who have payed will appear also, and that is the problem. The problem here is I can't compare the current payment date with previous one for one customer. method to create suitable expression, or even another query scheme ??
Hi All,
Just after a code or way to filter client details via a combo box.
Basically select combox drop down menu select the sales rep then it filters by sales rep and shows only the clients for that sales rep. I can get it to filter but it does the first client of that sales rep but not the rest.
Thanks
Karl
I have two combo boxes, Company Name & Name. The data that is selected is used to run a query from a button. However i would like to set it that if the user (but not required) selects the company name then only the names of the people belonging to that company appear, but if no company is selected then all the names for every company appear.
Can anyone make a suggestion as to the best way to go about this.
Thanks
I've read several threads about one combo filtering a second combo on a form, but can't seem to find a similar enough situation. Can you please advise on the following:
I have a form based on a query containing a whole load of fields from several tables. In particular the query contains a field called WorkstreamID from tblWorkstream.
Each tblWorkstream record has a Workstream ID, Workstream and foreign key called Project ID from tblProjects.
I want my form to have two combos: one for Projects (unbound) which filters the combo for Workstream (bound to the underlying query of the form)
How do I do this?
Please bear in mind, I am not an expert!
Thanks in advance
Sunil
Hi,
I have a form with a list box that is filtered by the entry made into a combo box. It works fine except that I want an option which shows all records in the list box. I tried using the formula below in the query criteria for the list box but it returns no records when I select All in the combo box. Why won't it work? Is there a better way to do this? Can anyone help?
IIf([Combo32].[Value]="All",Like "*",[Combo32].[Value])
hi all,
another quick question (last one for awhile I promise) but is there a way to add an option to a combo box (Filter by Selection) and Remove/Filter sort without right clicking on it?
cheers,
Andrew
I have a table that has the fields Scheme no, Title, Area, Pole No, Rate No, Description, Quantity. Each Scheme No has a number of Poles attached to it, and subsequently each Pole has a number of different rates attached (eg of table shown below)
On the corresponding form I have ID No, Title and Area in the Form header as they are the same for all fields. Therefore in the detail section I want the rest of the fields. The problem I have is I want the user to be able to choose a pole no from a combo box and show up only the corresponding rates to that pole. So for instance below the user could select in the combo box Pole no YP08 and only the rates used on that pole would show up (in this case it would be just HV99 and its description).
SchemeNo.....Title......Area......Pole Number.....Rate......Description etc
001...............xxx........UK...........YP26.... .......LV01..........xxxxx
001...............xxx........UK...........YP26.... .......HV89..........xxxxx
001...............xxx........UK...........YP08.... .......HV99..........xxxxx
001...............xxx........UK...........YP09.... .......YG67..........xxxxx
001...............xxx........UK...........YP99.... .......LG45..........xxxxx
I hope this makes sense to you. Any help with how I can set up this combo box would be greatly appreciated
Hi There. Im Trying To Filter Records Through A Combo Box Which Is So Far So Good. However What I Would Like To Do Is Select The Records Through The Combo Box And Have It Return And Populate Only Those Records. Has Anyone Got Any Suggestions To This?
Ive Attached The Sample Database Im Working On.
Cheers
Pleae take a look at the attached database, open frmUpdate and select an item in Group1.
I get a message box "Enter parameter Value" - Group1.
After I click OK, sometimes I get a run-time error, usually everything works fine until the form is reopened.
Can anyone see my problem.
thanks
Steve
I have a form with a combo box on it.
I want to use the combo box to query a subform.
So basically when you click on the record in the combo box it will filter the subform based on the selection.
Is there is a simple way or do I need to be more specific about the requirements ?
Any help would be greatly appreciated.
Domble
I am having an issue with my combo box filter, this set of code dynamically updates the combo box to add any new user and select the accounts that are assigned to them. Given everything works and everything filters, the problem is merely a cosmetic one that has to be fixed.
Basically what is happening is the Combo Box displays "*", and "All Records" but we can not get it too show the "Unassigned" -- any idea why?....
Hello everybody,
I have a problem.
I want to apply a filter on my form.When I filter on the combobox it works fine.
But when I filter on the date the form jumps into the error handler. Below is the code that I use for my filter:
Sub ApplyFilter()
Dim sFilter As String
sFilter = ""
'Filter on date
If Me.txtFilterDatumMelding = "" Or IsNull(Me.txtFilterDatumMelding) Or Me.txtFilterDatumMelding = 0 Then
If sFilter = "" Then
sFilter = ""
Else
sFilter = sFilter & ""
End If
Else
If sFilter = "" Then
sFilter = "[DatumMelding] = " & "'" & txtFilterDatumMelding & "'"
Else
sFilter = sFilter & " and [DatumMelding] = " & "'" & txtFilterDatumMelding & "'"
End If
End If
'Filter on combobox
If Me.cboFilterCallMelder = "" Or IsNull(Me.cboFilterCallMelder) Or Me.cboFilterCallMelder = 0 Then
If sFilter = "" Then
sFilter = ""
Else
sFilter = sFilter & ""
End If
Else
If sFilter = "" Then
sFilter = "[CallMelder_ID] = " & cboFilterCallMelder
Else
sFilter = sFilter & " And [CallMelder_ID] = " & cboFilterCallMelder
End If
End If
If Len(sFilter) > 0 Then
Me.Filter = sFilter
Me.FilterOn = True
Else
Me.Filter = ""
Me.FilterOn = False
End If
End Sub
I hope that you gus can help me. Could it be that the filter is a string and the date filter field is a date??????
thanks in advance.
I have at present 2 combo box's that filter, now....... the 1st combo box is a drop down value list that will filter the OPOwner (persons name) for example there are 3000 records and 5 OPOwners, I can for now filter my name in cboOPOwner combo box.
The 2nd box (drop down list) is Status which would be "New";"Open";Pipeline";"Lead" ect...
If I filter my name it brings up all records related to my name and the when I want to filter status it will bring up all records relating to say 'Pipeline' however it will bring everyone's ;Pipeline and not just mine.
What I want is to filter my name in the OPOwner combo box and once all records are filtered in my name then in the status combo box filter what ever I want to look at. example what I want to filter - 'Filter Neil' then 'Filter Pipeline, or filter Lead or New'.
This is the code I have in both combo's....
Private Sub cboOPOwner_AfterUpdate()
If Nz(Me.cboOPOwner.Text) = "" Then
Me.Form.Filter = ""
Me.FilterOn = False
ElseIf Me.cboOPOwner.ListIndex <> -1 Then
Me.Form.Filter = "[OPOwner] = '" & _
Replace(Me.cboOPOwner.Text, "'", "''") & "'"
Me.FilterOn = True
[Code] ....
I am trying to edit the below code to use 'Form_Select_Batch_Number_Form.Combo9.Value' as the combobox value to filter the records in 'Form_ Remitter_DB_Entry_Form'. I am trying to get the filtering to occur when a button on Form_Select_Batch_Number is selected. Below is my attempt to create the button to accomplish this but it is not functional and needs some work.
Code:
Option Compare Database
Private Sub Command0_Click()
DoCmd.OpenForm "Blank Form2", windowmode:=acDialog
Dim MyValue As String
[code]....
I am back with another question about Access 2010. I would like to filter a table by using a combo box.
I have several columns in the table, and I would like to filter them by their departments (there are several users in each department)
I have tried using the combo box wizard and select " I would like to search records based on the values in combo box" but the problem is that the department shows up as many times as it is in that table.
I came across another solution which was to create an unbound combo box and link it with the query. and the department criteria would be the following:
[Form]![NameOfTheForm]![NameOfTheCombobox]
but it did not work either.
Okay I created a database that I am going to use to collect data about a study we are doing.When a participant is added to the database on the main (Participation Details form), it automatically generates an ID and creates a record in a second table/form - a questionnaire (i.e. Athens Questionnaire) that the participants fill out preserving the ID number that was created in the participation details form (I have been able to achieve this).However what I wanted to do next is be able to filter the Athens questionnaire using a combo box which contained all the participant's ID's.I was able to create the combo-box and populate it with the ID's using a query and did not put a control source on it (i used =tblAthens.ParticipantID ....) iand created a sub-form that contained the questionnaire. I did this by creating the questionnaire in a separate form called frmAthens_sub and dragging it from the "explorer window" into my open Athens Questionnaire form. However when I attempted to place code in the "After Update" field of the combo box I keep getting errors and I am not sure why.The code I am using is:Option Compare DatabaseSub SetFilter() Dim LSQL As String LSQL = "select * from tblAthens" LSQL = LSQL & " where ParticipantID = '" & cboSelected & "'" Form_frmAthens_sub.RecordSource = LSQL End SubPrivate Sub cboSelected_AfterUpdate() 'Call subroutine to set filter based on selected ParticipantID SetFilter End SubPrivate Sub Form_Open(Cancel As Integer) 'Call subroutine to set filter based on selected ParticipantID SetFilter End SubIt is highly possible that I am just not doing something right as this is the first time I have used sub-forms. I tried to attach a copy of the database but cant get it below the max. The error seems to be coming from this line --> Form_frmAthens_sub.RecordSource = LSQLIs there an easier way or alternative code for filtering a sub-form from a combo-box?
View 3 Replies View Related