Basically from my database, i want to create a timetable, that can be generated for every student, that shows all of the lessons they have chosen, and on what day this lesson is, every student can only choose a maxinum of 3 lessons. I only need this for one week by the way.
I've got a Query and Form with all the days and lessons listed, and my other fields are shown in my relationships. I was thinking the best solution for me would be using a report, although i was confused as how i could create a timetable that would do what i require for every student.
I am able to make a form that correctly works lets the user enter records for 1-6, with the user pressing crtl+shft+; to give the correct starttime, and then at the end of the task, the user can press the same and register the end of the task.
My problem is that I can't work out how to calculate 7) as one needs to input some VBA code that converts date/time to numeric values, allowing you to calculate time difference. However, I simply don't know; a) the proper 'code' that will calculate the time different between 5) and 6). I saw that it was perhaps the dateDiff command? And b) where I would even put that code into, i.e. the exact location where one goes to and types the code into... Is it a query? Do you set it to a Calculated value in the table editor?
I need to know if possible to create multiple queries or reports at the same time. We have large table that is updated monthly this report gets broken down manually by Manager (30 managers in total) hen email to each manager.
Report or query specs will never change only the data I could do this manually create and save query/report for each manager once but I was wondering if there was code that will create all the queries and reports at the same time.
I think my question is fairly simple - fingers crossed.
I want to create a field that, whenever a record is added, it auto-adds the date & time the record was created. I'd call it Book_Date_Added, or something like that. I tried snooping around the Default Value options but couldn't figure it out.
The table exists and it already has some records, so I'd need to know how to add this field rather than how to create it when I create a table (although that would be helpful too, if it's somehow different).
I'm trying to make a query to filter or show only those customers when it is the time for their monthly payment.The query I have consists of four fields which are
1- Order ID 2- Payment 3- Date (Default value set to Date ()) 4- Date for next time Payment (Default value set to date () + 30)
I made another field called "states". In this field I putted the following expression
Code: IIf(([Date for next time Payment]-Date())= 0 "Should Pay";" ")
Then, I set the criteria for such field to "should pay" so that only customer "should pay" will appear in the query datasheet. However, this method has the following shortcomings:
1- It works only for one day (alert day) ,i.e., customers will filtered only when the expression is true. 2- Customers who have paid will still appear as a "should pay" until the day (the day that make the expression true) finish. 3- Customers whose pay late (maybe after 1 week) will disappear form the query datasheet after alert day finish.
To overcome the above shortcomings, i modified the expression to
Code: IIf(([Date for next time Payment]-Date())<-1 And ([Date for next time Payment]-Date())>-15;"Should Pay";" ")
This method will extend the alert duration to 15 days, so the customers who haven't pay yet will appear in the query datasheet for 15 days. However, the customers who have payed will appear also, and that is the problem. The problem here is I can't compare the current payment date with previous one for one customer. method to create suitable expression, or even another query scheme ??
I 'm trying to create a database for tracking time off from work and print a weekly roster. I have built several databases in Access 2003 and have now transitioned to 2010 and it is seems to be going well. My past databases have been rather simple data in data out not really that big of a deal. However on this database they need a report that will show them a week view that shows them all the employees regular days off and any additional time off they have schedule in that week.
I have an employee info table that has employee basic info, Emp name, Emp number, Work Week code (which identifies which days off the employee has) Hire Dates (for seniority sorting) and then I have 7 fields listed as D1, D2, D3 and so on until D7 (I will try to explain these fields later).
I have another table (Time Requests) that has 3 fields, Date, Emp number, and Time code (which identifies why they are off work or unavailable to be assigned).
The last table I will refer to has 7 fields, they are Date1, Date2, Date3, Date4, Date,5 Date6, Date7
I now have a form. This form has the 7, fields Date1, Date2.... Date7.
On my form Date1 field is updated by a manager with a date that is a Sunday then Date2 = [Date1]+1,Date3 = [Date1]+2 and so on until I have all 7 fields showing dates from Sunday - Saturday.These fields are lined across the top in a vertical direction positioned above a subform of the employee info table. So directly below the 7 Date fields are the D1, D2, D3, D4, D5, D6, D7 fields then to the right is the Emp name and Emp number, This gives me a Week view of who is working.
I have been able to get the D1, D2.. fields to show their respective Work Week codes by writing very simple If Then statements . So here is where I AM STUCK, When I am showing this week view how do I get D1 - D7 to identify what date they are supposed to be in reference to Date1 - Date7 then compare themselves to the table Time Requests to see if they have a match and then set the value of D1, D2 . to the Time code in that table. D1 - D7 need to auto populate and do this for about 50 employees.
Looking to create two command buttons or two keystrokes sets in an Access 2007 form that will allow me to place a current date and time in any allowable field where the Cursor is presently placed. Similar to what was in Access 2000, ctl: (for the current date) and ctl shift : (for the current time).
I have a make-table query that pulls all the fields from 1 table (MainTable), and creates a new table with a date stamp based apon a form value entered (New Table = MainTableWithDate).
Currently, I setup the query to pull info from the form field like this:
DateField: [Forms]![frmmain]![DateField]
However, when the make-table query is done - all date fields are blank (all other fields are correctly created), and when I look at the new created table (mainTableWIthDate), the typeassigned to the date field is "Binary" (in the form, I've specified LongDate).
I have three tables that contain different columns but linked by a primary column call Name. I want to create a table where all these different columns in the three tables join to form a master table which can be updated regularly either through the master table or the smaller tables. The master table also has the primary column as Name.
If I update the master table with records, it should update the respective linked table and vice versa. I also want to link these tables to my SharePoint site.
Note: except the Name column, none of these tables have any other columns in common How do I go about this?
Here is what I am trying to do: I have form, and a table which is created from this form. The data is entered a second time using the form to make sure there are no discrepancies.
Any easiest way to implement this? (create a new table (which is duplicate), and then compare them?
MP No (Primary key), Sales, Date Entry, Specs, Email
The second Table is as follows:
MP No, Quantity, Description, DWG, Price
There is a "one-to-many" relationship between the two tables through the MP No field so whenever I go to the first table there is a sub-table for each MP No. Correct?can I create an extra sub table under the sub table already created?
I'm a relative newbie to the more advanced features available to Access.
If someone could help me or point me in the right direction, I'd really appreciate it.
I have one table that contains companies and associated contact info. Each company can have more than one unique number ID (3 digit alphanumeric).
I want to take this table and run a query to create a new table that will only have one instance of each company name, along with the other contact information. The unique ID's aren't needed in this table (but it would be great if I could somehow toss them in, too).
This new table would then be used to create a form with a combo box containing all of the names to quickly jump to their contact info.
Any and all help would be appreciated. If a query isn't the best avenue for this, then please point me in that direction, too.
I'm not sure if I've picked the right forum topic for this... It's not a straightforward table question, and I think the only way I can do what I need is with a query of some sort. Apologies if it should have gone in 'Tables'...
The situation is: I'm creating a database (using Access 2003) in which our secretaries can enter exam marks for students. The difficulty is that there are ten papers (exams), each student's exam is marked by at least two examiners and there are at least 6 examiners per paper. Every examiner also marks more than one paper, but doesn't mark all papers.
So, I've got a table with all of the examiners and the papers they're marking and I've got a table with all the students and the papers they're taking. Because we have to enter the marks in such a way that we know both which mark an examiner gave and (obviously) which mark a student received (e.g. so we can look at statistics for each examiner), I thought the best way to do this would be to run a query that created a new table per paper in which the field names would be: Student_ID, <name of examiner 1 for the paper>, <name of examiner 2 for the paper>, <name of examiner 3 for the paper>, etc until the end of the list of examiners for that paper. The student's number would populate the Student_ID field and then the secretaries would enter each examiner's mark in their named field. Like this:
| Student_ID | A.N. Other | J. Blogs | J.Q. Public | Agreed_Mark | 1234A 72 74 73 2345B 65 68 67 3456C 71 73 72 4567D 52 51 52
Listing the name of every examiner (including those who aren't marking that particular paper) isn't an option (and would have to be hard coded into a table in any case, as far as I'm aware, either in a query or in a table design. This is something I'm loathe to do). Ideally, the secretary would be able to press a button on a form and have all the mark entry tables for all the papers created automagically.
The examiners for the different papers change every year, and not every academic marks exams every year, so this data will not remain static. Hard coding a table with examiner names would make more work for the secretaries. (I want to avoid this as all mark entering for all students is done in a single day. This means over 600 students at 3 marks per student [mark 1, mark 2, and final agreed mark] with time to contact examiners with questions... and only 2 secretaries, each of whom deals with a different section of students).
Because of the nature of the marking, it would also make quite a lot of work for the secretaries if we had to cross reference a generic Examiner_1 field with a different examiner for each paper, so the field name really must be the examiner's actual name.
Can anyone help me? I'm happy to do it with either VB or SQL; I'm not a programmer, but I can usually work out what code does even if I can't write it myself. I should be able to adapt anything presented as long as it's complete and doesn't assume that I know the basics. :) I've also got two reference books to hand: _Microsoft Access 2003 Forms, Reports and Queries_ by Paul McFedries and _How to Do Everything with Microsoft Office Access 2003_ by Virginia Anderson.
I split my db to front-end and back-end. 20 users are using the database. But now I have the problem: In my admin front-end db I created a new table and some reports to the table, but this new table I have only in my front-end db and it doesnot appeares in back-end db - so that other users has no data in hte report for the new table. How I can create new table to be in back-and table too?
I have an application with a backend db on PC 1, and the same application on PC 2 linked to the backend db on PC 1 via the network.
The link works fine but the time formats are different.
On PC 1 the time format is shortime and displays as it should i.e. in 24 hour clock format
However on PC 2, opening the same database via the network, the time format is still shorttime but when you read the time within the code it comes out in AM/PM format. Also, when the defaul tiem should be #20:00:00# but this changes to #8:00:00 PM#
Weirdly though, when you just open the table, the times are in the correct shorttime format.
Guessing, it must be a setting within the main core of Access 2003 that is different between the 2 instances?
I have a running application which I created in excel. Each time a new copy of the excel sheet is worked with, I need to create a new table in an access database, that holds part of the data coming from excel.
Can you explain, or can you point me to a manual that I can read that explains how to do this ?
I have a dilemma. I need my app to print out legally binding property schedules for insurance purposes. A property can have any number of schedules created during a year according to how many changes are made. My instinct is to use a set of nested queries to generate the reports and then save them as snapshots should they need to be referred to later (they will!!). However I have just been wondering if I should create a new table that gets populated with the full data for each property schedule when one is printed so that there is a definitive and tangible record for each schedule. The latter seems like not good practice within Access as I know it but I have this niggling hunch that it might be the right approach for this app. On the lazier note it would also make re-creation or subsequent investigation very much easier than having a whole sequence of horribly dynamic queries! Does anyone have anything similar (sure someone does) and what did they do? Thanks for any input
I am trying to find out if there is a way for me to create a table based on a specific month. For example I might select January 2005, I would then want to create a table with all the days of that month included, so that I could then add specific data to each day.
Is there a way that I can simply query the system calendar to do this sort of thing. I have spent quite a lot of time searching through this forum but have had no luck.
I'm trying to create a table that automatically contains records for every permutation of the two foreign keys it imports. Let me explain with an example:
I have a Characters table: CharacterID (Primary Key) CharacterName CharacterClass [...]
And, I have a Skills table: SkillID (Primary Key) SkillName SkillDescription [...]
I want a third table named CharacterSkills to combine those two tables. It might look like this: CharacterID (Primary Key) SkillID (Primary Key) CharacterSkillSlot [...]
That looks a lot like a junction table for a many-to-many relationship. The difference is I want this table automatically filled with every combination of Characters and Skills. For example, if I have three characters and five skills this table would contain fifteen records. If I add a fourth character I'd expect this table to grow by another five records (as one record per skill is automatically added).
Here are those same tables with some example data.
Hello: I have a "create table" statement as an action for one of my command buttons (on a form) within my access db. I can create a yesno field with no problem, my question is - how within the same "create table" statement or otherwise with code can I make the yesno field appear as a checkbox?
I can do it within the design view of the table once the table is created, but I want to do it on the fly. Also, I don't want to do this within a form, just on the table itself.
I am trying to create a database for estimating manhours on projects. There is a setup table with two columns: "Project" and "Time Period". The database is supposed to allocate manhours to tasks on projects, which is used in estimating man hour costs and also forecasting labour resource requirements.
For example, say the database is used for "Project X" and "Project Y" projects, with Project X running from Jan to March and Project Y running from Aug to Dec. The setup table would look like this:
PROJECT TIME PERIOD Project X Jan Project X Feb Project X March Project Y Aug Project Y Sept Project Y Oct Project Y Nov Project Y Dec
From this table, I need to automatically create a new table for each unique project that allows man power to be allocated to each time period. Following on with the example, there are two unique projects, so two tables need to be automatically created with column headings as per below:
Project X table: FUNCTION PERSON JAN FEB MARCH
Project Y table: FUNCTION PERSON AUG SEPT OCT NOV DEC
"Function" is a description of a role, for example engineer. "Person" is the individual undertaking that role, for example Bob Jane. Then in each time period a number between 0 and 1 would be entered corresponding to how much time (0 is no time, 1 is full time) that person would be spending on that function for that time period. Then the table would be populated with many functions and people in this manner.
So the number of tables automatically created depends on how many unique projects there are in the "Project" field of the setup table. The number of columns in these tables will be atleast two: "Function" and "Person", plus another column for each time period defined for that project.
Perhaps something can be done with a make-table query, but all I can get that to do is copy data from one table straight into another table.
