I have 44 checkboxes, each has a textbox next to it. What I want is when the user selects a checkbox, the textbox next to it will be enabled. Also, when the user unselect a checkbox, the textbox next to it will be disabled and any value entered is cleared.
Another way is whenever the user enters a value in a textbox, the checkbox associate with it is selected and vice versa.
I'm trying to have a button in a form that, when clicked, will time stamp a text box already formatted for time. But once the text box is filled with a time, the button then disables itself for that record.
If I switch to another record where the text box is empty, the button will enable itself without closing the form, but obviously re-disable itself if I go to a record the text box is filled.
I'm sure I could use conditional formatting for it, but I don't think I'm going about it the right way. I already got a basic button built to timestamp.
Is there a way in access, through vba or any other means, which would allow me to either enable or disable criteria in a query based on the value of textbox??
Like i have a query that displays bookings customer has made between two dates, so i made a query and in the starting and ending date fields i get the value from form. In case if the use does not enter ending date, i would like to run the query with starting date only that displays booking made after the starting date.
Currently the starting date criteria is set to a textbox of form, and so is ending date. So if customer selects 1st April 2015 as starting date and 30th April 2015 as ending date the query should display the bookings between 1st and 30th of April. And if the user enters only 1st April in starting date it should display bookings starting from 1st April onward.
I am asked to create a checklist for a number of tasks to be executed in a particular shift. However in some tasks can be skipped. There are three shifts per day.
To accomplish this i have created a continious form with a number of checkboxes per task which represent the days of the week. The tasks itself are stored in a seperate table with a checkbox per shift (task settings). If the tasks must be performed in a particular shift, the checkbox is activated (= true).
Goal here is, if a task doesn't have to be executed in a shift the task should not be visible on the continious form. The recordsource of the continuous form is a query, which contains a join between the table with the task settings and the table with the tasks performed.
I have placed some code to perform the task in the form's current event
In the continuous form current event I have placed for every checkbox the following code:
Private Sub Form_Current()
If Me. PerformTaskShift.Value = True Then
Me.MaandagOchtend.Enabled = False
End If
End Sub
However when i execute the code and load the form, not only the checkbox in the row mentioned are set invisible, all the rows are. Is there any way to set only the checkboxes on the rows mentioned invisible, in stead of all rows?
Hi everyone,
Need some help here! I have a table where different types of records are recorded. Let say for argument's sake my tblMain looks like this:
RecID (autonumber)
EntryType (Combo box linked to my tblEntryType)
Field1 (text)
Field2 (text)
I then have tblEntryType which lists the different types of entries to be made and which fields are required on my form and what the lables should be. The structure looks more or less like this:
EntryID (autonumber)
EntryName (text)
Field1Req (true/false)
Field1Tag (text)
On my form, my record source is tblMain. When my user makes a selection in the combobox EntryType, there is a lot of code behind the AfterUpdate function like this:
If EntryType.Column(2) = True Then
Me.field1.Enabled = True
Me.lblfield1.Caption = Me.entrytype.Column(3)
Else
Me.field1.Enabled = False
End If
I find this setup a bit labour intensive, especially as my form has quite a few fields! Is there a way that I can "look up" which fields are required from the table and enable/disable and label based on my tblEntryTypes without me having to creating so much code/use the "column" function.
Let me know if I am not making myself clear and I will be glad to try explain so more!
Tx in advance,
Mel
Hi everyone,
Need some help here! I have a table where different types of records are recorded. Let say for argument's sake my tblMain looks like this:
RecID (autonumber)
EntryType (Combo box linked to my tblEntryType)
Field1 (text)
Field2 (text)
I then have tblEntryType which lists the different types of entries to be made and which fields are required on my form and what the lables should be. The structure looks more or less like this:
EntryID (autonumber)
EntryName (text)
Field1Req (true/false)
Field1Tag (text)
On my form, my record source is tblMain. When my user makes a selection in the combobox EntryType, there is a lot of code behind the AfterUpdate function like this:
If EntryType.Column(2) = True Then
Me.field1.Enabled = True
Me.lblfield1.Caption = Me.entrytype.Column(3)
Else
Me.field1.Enabled = False
End If
I find this setup a bit labour intensive, especially as my form has quite a few fields! Is there a way that I can "look up" which fields are required from the table and enable/disable and label based on my tblEntryTypes without me having to creating so much code/use the "column" function.
Let me know if I am not making myself clear and I will be glad to try explain so more!
Tx in advance,
Mel
im trying to enable/disable checkboxes based on a combobox selection for instance,
i make the selection in a combo box called terms and conditions. i want it then to only enable the business,domestic and summary check boxes for that type, with the onther check boxes staying disabled. is there a way this can be done through code like the statement "only enable if this letter type selection has been selected"
I am trying to lock records on a form and subform after a checkbox has been ticked, have used the code below from a previous post.
Private Sub Form_Current()
If Locked = -1 Then
Me.AllowEdits = False
Me.AllowAdditions = False
Me.AllowDeletions = False
[Code] .....
This is locking the Main form records is there a way to code this so that the fields on the subform are also locked when the checkbox is ticked?
Dear All:
I have a form with three items:a checkbox called "Check231", a textbox called "text921" and another textbox called "text762".
What I wish to do is: Enter text in textbox921, which stays the same as I scroll through each record. Then If checkbox check231 is checked, it displays text from textbox921 to textbox762. Textbox762 is bounded to the form.
Any ideas on how to get started?
Many thanks,
Dion
Here is my problem: When a certain yes/no box is true (checked) other fields on the form are not enabled. That works just find when I am on the record that I click the yes/no field. When I go to another record and then go back to the previous record the fields that should be disabled due to a certain yes/no box being true are now enabled and not disabled. Below is my code. Can anyone tell me what I am doing wrong?
Private Sub Form_Current()
SetCheckBoxes
End Sub
Private Sub SetCheckBoxes()
If Me.StaPrimary = True Then
Me.StaUp.Enabled = False
Me.StaUpTrainerFirstName.Enabled = False
Me.StaUpTrainerLastName.Enabled = False
Me.StaUpVerifyDate.Enabled = False
Me.StaUpReverifyDate.Enabled = False
Me.StaBack.Enabled = False
Me.StaBackTrainerFirstName.Enabled = False
Me.StaBackTrainerLastName.Enabled = False
Me.StaBackVerifyDate.Enabled = False
Me.StaBackReverifyDate.Enabled = False
Me.StaOther.Enabled = False
Me.StaOtherTrainerFirstName.Enabled = False
Me.StaOtherTrainerLastName.Enabled = False
Me.StaOtherVerifyDate.Enabled = False
Me.StaOtherReverifyDate.Enabled = False
End If
If Me.StaPrimary = False Then
Me.StaUp.Enabled = True
Me.StaUpTrainerFirstName.Enabled = True
Me.StaUpTrainerLastName.Enabled = True
Me.StaUpVerifyDate.Enabled = True
Me.StaUpReverifyDate.Enabled = True
Me.StaBack.Enabled = True
Me.StaBackTrainerFirstName.Enabled = True
Me.StaBackTrainerLastName.Enabled = True
Me.StaBackVerifyDate.Enabled = True
Me.StaBackReverifyDate.Enabled = True
Me.StaOther.Enabled = True
Me.StaOtherTrainerFirstName.Enabled = True
Me.StaOtherTrainerLastName.Enabled = True
Me.StaOtherVerifyDate.Enabled = True
Me.StaOtherReverifyDate.Enabled = True
Me.StaPrimaryVerifyDate = ""
Me.StaPrimaryReVerifyDate = ""
End If
If Me.StaUp = True Then
Me.StaPrimary.Enabled = False
Me.StaPrimaryTrainerFirstName.Enabled = False
Me.StaPrimaryTrainerLastName.Enabled = False
Me.StaPrimaryVerifyDate.Enabled = False
Me.StaPrimaryReVerifyDate.Enabled = False
Me.StaBack.Enabled = False
Me.StaBackTrainerFirstName.Enabled = False
Me.StaBackTrainerLastName.Enabled = False
Me.StaBackVerifyDate.Enabled = False
Me.StaBackReverifyDate.Enabled = False
Me.StaOther.Enabled = False
Me.StaOtherTrainerFirstName.Enabled = False
Me.StaOtherTrainerLastName.Enabled = False
Me.StaOtherVerifyDate.Enabled = False
Me.StaOtherReverifyDate.Enabled = False
End If
If Me.StaUp = False Then
Me.StaPrimary.Enabled = True
Me.StaPrimaryTrainerFirstName.Enabled = True
Me.StaPrimaryTrainerLastName.Enabled = True
Me.StaPrimaryVerifyDate.Enabled = True
Me.StaPrimaryReVerifyDate.Enabled = True
Me.StaBack.Enabled = True
Me.StaBackTrainerFirstName.Enabled = True
Me.StaBackTrainerLastName.Enabled = True
Me.StaBackVerifyDate.Enabled = True
Me.StaBackReverifyDate.Enabled = True
Me.StaOther.Enabled = True
Me.StaOtherTrainerFirstName.Enabled = True
Me.StaOtherTrainerLastName.Enabled = True
Me.StaOtherVerifyDate.Enabled = True
Me.StaOtherReverifyDate.Enabled = True
Me.StaUpVerifyDate = ""
Me.StaUpReverifyDate = ""
End If
If Me.StaBack = True Then
Me.StaPrimary.Enabled = False
Me.StaPrimaryTrainerFirstName.Enabled = False
Me.StaPrimaryTrainerLastName.Enabled = False
Me.StaPrimaryVerifyDate.Enabled = False
Me.StaPrimaryReVerifyDate.Enabled = False
Me.StaUp.Enabled = False
Me.StaUpTrainerFirstName.Enabled = False
Me.StaUpTrainerLastName.Enabled = False
Me.StaUpVerifyDate.Enabled = False
Me.StaUpReverifyDate.Enabled = False
Me.StaOther.Enabled = False
Me.StaOtherTrainerFirstName.Enabled = False
Me.StaOtherTrainerLastName.Enabled = False
Me.StaOtherVerifyDate.Enabled = False
Me.StaOtherReverifyDate.Enabled = False
End If
If Me.StaBack = False Then
Me.StaPrimary.Enabled = True
Me.StaPrimaryTrainerFirstName.Enabled = True
Me.StaPrimaryTrainerLastName.Enabled = True
Me.StaPrimaryVerifyDate.Enabled = True
Me.StaPrimaryReVerifyDate.Enabled = True
Me.StaUp.Enabled = True
Me.StaUpTrainerFirstName.Enabled = True
Me.StaUpTrainerLastName.Enabled = True
Me.StaUpVerifyDate.Enabled = True
Me.StaUpReverifyDate.Enabled = True
Me.StaOther.Enabled = True
Me.StaOtherTrainerFirstName.Enabled = True
Me.StaOtherTrainerLastName.Enabled = True
Me.StaOtherVerifyDate.Enabled = True
Me.StaOtherReverifyDate.Enabled = True
Me.StaBackVerifyDate = ""
Me.StaBackReverifyDate = ""
End If
If Me.StaOther = True Then
Me.StaPrimary.Enabled = False
Me.StaPrimaryTrainerFirstName.Enabled = False
Me.StaPrimaryTrainerLastName.Enabled = False
Me.StaPrimaryVerifyDate.Enabled = False
Me.StaPrimaryReVerifyDate.Enabled = False
Me.StaUp.Enabled = False
Me.StaUpTrainerFirstName.Enabled = False
Me.StaUpTrainerLastName.Enabled = False
Me.StaUpVerifyDate.Enabled = False
Me.StaUpReverifyDate.Enabled = False
Me.StaBack.Enabled = False
Me.StaBackTrainerFirstName.Enabled = False
Me.StaBackTrainerLastName.Enabled = False
Me.StaBackVerifyDate.Enabled = False
Me.StaBackReverifyDate.Enabled = False
End If
If Me.StaOther = False Then
Me.StaPrimary.Enabled = True
Me.StaPrimaryTrainerFirstName.Enabled = True
Me.StaPrimaryTrainerLastName.Enabled = True
Me.StaPrimaryVerifyDate.Enabled = True
Me.StaPrimaryReVerifyDate.Enabled = True
Me.StaUp.Enabled = True
Me.StaUpTrainerFirstName.Enabled = True
Me.StaUpTrainerLastName.Enabled = True
Me.StaUpVerifyDate.Enabled = True
Me.StaUpReverifyDate.Enabled = True
Me.StaBack.Enabled = True
Me.StaBackTrainerFirstName.Enabled = True
Me.StaBackTrainerLastName.Enabled = True
Me.StaBackVerifyDate.Enabled = True
Me.StaBackReverifyDate.Enabled = True
Me.StaOtherVerifyDate = ""
Me.StaOtherReverifyDate = ""
End If
End Sub
On searching the forum, I found the following post for enabling/disabling BypassKey. I did as instructed but on clicking the label, it gives 'syntax error with 'On Error Goto' in red color and highlighted.
Hello af1112 welcome to the Forum...
I use this code that ghudson supplied at the beginning of this post.
First of all create a copy of your db (Just incase.. )
Now......
Create a label on a form somewhere and make it invisible to other users
(I have mine hidden in my main Switchboard)
The idea is that by clicking on the label you can activate/de activate the code without anyone else knowing about what you are doing..
Name the label "bDisableBypassKey" & hide it somewhere in the corner of your screen or something.
Copy & Paste the code inbetween the bold text to the onclick event of the label you have just created
Private Sub bDisableBypassKey_Click()
On Error GoTo
Err_bDisableBypassKey_Click
'This ensures the user is the programmer needing to disable the Bypass Key
Dim strInput As String
Dim strMsg As String
Beep
strMsg = "Do you want to enable the Bypass Key?" & vbCrLf & vbLf & "Please key the programmer's password to enable the Bypass Key."
strInput = InputBox(Prompt:=strMsg, Title:="Disable Bypass Key Password")
If strInput = "MY PASSWORD" Then 'Change password to your own
ChangeProperty "AllowBypassKey", DB_BOOLEAN, True
Beep
MsgBox "The Bypass Key has been enabled." & vbCrLf & vbLf & "The Shift key will allow the users to bypass the startup options the next time the database is opened.", vbInformation, "Set Startup Properties"
Else
Beep
ChangeProperty "AllowBypassKey", DB_BOOLEAN, False
MsgBox "Incorrect ''AllowBypassKey'' Password!" & vbCrLf & vbLf & "The Bypass Key was disabled." & vbCrLf & vbLf & "The Shift key will NOT allow the users to bypass the startup options the next time the database is opened.", vbCritical, "Invalid Password"
Exit Sub
End If
Exit_bDisableBypassKey_Click:
Exit Sub
Err_bDisableBypassKey_Click:
MsgBox "bDisableBypassKey_Click", Err.Number, Err.Description
Resume Exit_bDisableBypassKey_Click
End Sub
Now paste this code in the Double click event of the same label
Private Sub bDisableBypassKey_DblClick(Cancel As Integer)
Private Sub Disable_Click()
Option Compare Database
Option Explicit
Function ChangeProperty(strPropName As String, varPropType As Variant, varPropValue As Variant) As Integer
Dim dbs As Object, prp As Variant
Const conPropNotFoundError = 3270
Set dbs = CurrentDb
On Error GoTo Change_Err
dbs.Properties(strPropName) = varPropValue
ChangeProperty = True
Change_Bye:
Exit Function
Change_Err:
If Err = conPropNotFoundError Then ' Property not found.
Set prp = dbs.CreateProperty(strPropName, _
varPropType, varPropValue)
dbs.Properties.Append prp
Resume Next
Else
' Unknown error.
ChangeProperty = False
Resume Change_Bye
End If
End Function
To Test
click on your label to activate the password prompt
and type in the wrong password (that will now disable the bypass key) and you will not be able to open the db by holding down the Shift button
to disable enter the correct password and you will be able to use the Shift button
Would someone help?
Hi there I am new to Access and I am currently modifying an existing DB. Currently this DB has a main table which holds a bunch of Patient info such as:
Name
Age
AssignedStaff
Condition
etc....
The assigned staff field is populated from another table (Staff), which holds all the staff members working at the institution. However a couple of these individuals have left and they no longer want their name to show up on the form when inserting a new record. However we do want there name to still be in the DB for historical reporting purposes......My intital thought was to create another field in the Staff table that would hold either a "Active" or "Inactive" entry. Then just have a simple If statement to see if the staff member is active or inactive. Does anyone see any problems with this solution or propose a more efficient method.
Thanks
I am creating a data entry form with combo boxes related to two different tables:
TblEducationID
EducationID - Auto# PK
Education - Text
TblMediaFill
MediaFillID - auto# PK
Incubation Time- text
Incubation Temp - text
In my form, I have a combo box that the user selects the Education Type (Media Fill Test; Aseptic Technique Observation, Watch Video, etc....)
I want the incubation time and temp text boxes to be disabled unless Media Fill Test (ID#4) is selected on the first combo box. (I get a Procedure Declaration does not match error.)
Private Sub EducationID_AfterUpdate()
If EducationID = 4 Then
IncubationTime.Enabled = True
IncubationTemp.Enabled = True
Else
IncubationTime.Enabled = False
IncubationTemp.Enabled = False
End If
End Sub
Any Suggestions? Thanks,
Jason
I've used a form with labels for building a menu options
¿How can I do to enabled or disables a label ? (each label is a menu option)
I've tried to use:
label1.Enables = True
but don't work
Would you help me ?
Thanks a lot
Carlos
I've used a form with labels for building a menu options
¿How can I do to enabled or disables a label ? (each label is a menu option)
I've tried to use:
label1.Enabled = True
but don't work
Would you help me ?
Thanks a lot
Carlos
I have the following which works
Private Sub A300_Completed_AfterUpdate()
If A300_Completed = True Then
A300_Date.Enabled = False
User1.Enabled = False
Else
A300_Date.Enabled = True
User1.Enabled = True
End If
End Sub
for some reason when creating a new record the above disabled/enabled fields retain the same property of the last records check? The form in a single (not a continuous)
**A300_Completed is a check box
Can anyone help please? Thanyou
Hello. I have a form with a million little buttons on it (don't get me started, I didn't design it! - heh)...
Depending upon which user is running the mdb, I would like all but 16 (of the 80 or so) objects/controls disabled/enabled. I would like to autodisable all the controls, then enable the subset (or all of them) depending who the current user is.
SO in short, other than individually disabling/enabling the many items, is there a magic command for vba, similar to enable *.* for controls [silly e.g., but I hope you get my point...]
Thoughts!
Thanks!
-madEG
Hi guys, I have a huge problem with a table I'm currently making and I was hoping you could help.
I have created a field in one of my tables using a Combobox lookup that only allows users to enter one of two options. What I want to do is restrict the other fields that a user can enter data into based on the their selection in the lookup field.
i.e if they select the first option then they can see and enter data into a few additional fields (but not others). Likewise if they select the second option they see/dont see other fields.
I am using Microsoft Access 2003.
Hi guys, I have a huge problem with a table I'm currently making and I was hoping you could help.
I have created a field in one of my tables using a Combobox lookup that only allows users to enter one of two options. What I want to do is restrict the other fields that a user can enter data into based on the their selection in the lookup field.
i.e if they select the first option then they can see and enter data into a few additional fields (but not others). Likewise if they select the second option they see/dont see other fields.
I am using Microsoft Access 2003.
Hi.
Lets say i have a (Yes/No) combo box and a text box.
I have it so if my combo box says Yes the text box must become enabled so i can type in it.
The problem comes in when I goto a new record, the combo box is still enabled.
I have tried putting the text box to disabled in form_load, but then when I go back to view other records the text box is disabled and the combo box is already set to Yes.
How do i overcome both these problems at the same time ??
I accidently unchecked the "allow full menus" option in Tools - Startup. When I did that, the menu bar at the top of my database no longer displayed the "Tools" option.
Does anyone know how I can restore the full menus option?
I am new to access and can do nothing with my database until I get my menus back.
Thanks,
Hello,
I would be very greatful if someone could help me. I have a Combo box called "COM01" which i want it to control the enable function of 3 Text Boxes TXT01,TXT02 and TXT03.
When COM01 dropdown menu is used and field No is selected i want the 3 Text Boxes above to be set to Enable (False). The reverse when option Yes is selected is required for the same Text Boxes Enable (True)
I will be adding the code to the Change() of the COM01 properties
I have tried to use Case statments without success.
Any help is greatly needed
The following code governs whether two fields are enabled/disableddependent on a selection made in a frame with 4 radio buttons. All are bound controls.
The first time that you select an option it's fine and the fields disable correctly, however, when I close the form and then go back into it the controls that should be disabled are enabled. I have to reselect the appropriate radio button to enable/disable the fields again.
Can anyone let me know what I am doing wrong?
Cheers
Private Sub fraSysSel_AfterUpdate()
If fraSysSel.Value = 1 Then
Conditions_Expected.Enabled = False
Actual_Conditions.Enabled = False
Else
Conditions_Expected.Enabled = True
Actual_Conditions.Enabled = True
End If
End Sub
hey I have a requirement to switch on or off the toggle filter button depening on who the current user is.
I can id the current user no problem - my issue is how do I swicth this button on and off??
thanks
Martyk
Hi, bit of a noob here. I've searched for a while but I can't find anything related.
I have a data entry form that auto recalls the last entry that was made in it. I did this in an effort to speed up data entry. Anyways, here is the code I use.
Private Sub Investigator_AfterUpdate()
Investigator.DefaultValue = "'" & Investigator.Value & "'"
End Sub
Now the problem is that I want to be able to enable and disable this event proceedure with a check box. Is there a way to do this?
Thanks in advance for all your help.
I need an Access 2010 function to enable/disable screensaver on W8.1
View 1 Replies View Related