hi
Good Day!
anybody here who can help me on how to fill in data in the listview object in MS Access programming, I just want to know in filling up data in each rows and column , as what I know in Vb6.0 its different...
Thanks
I'm having trouble finding any useful documentation on the ListView control. I'm using Access 97. If you know of a good source for this, please reply.
I have two specific questions, too:
(1) Is there a way to access all the selected items in a multi-select ListView without having to loop through every single item? (Something similar to the Access ListBox control's ItemsSelected property would be nice....)
(2) Is there a way to deselect all items without having to deselect each one individually?
Hi:
I need to have a listview (or similar control) with several of the columns being a dropdown list. Does anybody know how I can do this? I have done this in Visual Basic 6.0 but not V.B.A.
Hi,
I have added a listview on a form from ActiveX control. I am not able to add items to it. I do not get the ListITems.additem when I press dot after listview control name. Please help
Hello all,
I finally got TreeView to work, by downloading the example database from this (http://www.access-programmers.co.uk/forums/showthread.php?t=80805&highlight=treeview) thread. I haven't had as much luck with ListView, though. Does anyone have a database they could post that has a working listview? I'd greatly appreciate it!!
Thanks,
Eric
This is driving me crazy! I have some code that has a list of items in a listview. When I right click it shows a pop-up right click menu with a macro. Then I select an item in the list that says Rename. After ensuring a single element is selected the StartLabelEdit method is called on my list view. Then I can begin editing. Normally this works fine. However, if I first double click a list item. Then I enter my double click list view event handler and from there I open a form. Later if I close that form and then try right-clicking and selecting rename. This time after StartLabelEdit is called, the BeforeLabelEdit event is never called. The whole selected line blinks momentarily and then wherever my cursor is at that moment every item between it and the originally selected item becomes selected. If I move my mouse around the selection changes to be between the originally selected item and the one my mouse is over as it moves. It's as though I had clicked the left mouse button down but didn't let go of it and then started moving the mouse around. If I left click and release again it seems to get out of this mode, but I am still not able to ever manually invoke the StartLabelEdit method after this point. If I close the form and re-open it, it works fine. (I've tried calling refresh on the list view but this had no effect.)
Here's the really weird part. If instead of double-clicking to open a form, I right click and select a menu option to call the exact samed double click event method. Everything works fine as you would expect. Then I tried another test. I made the double click method call another method to open the form. When I did this and tried the same alternate way of opening a form, it did not work and the same original error occurred again. This weird behavior is bizarre and I have no real idea how to troubleshoot it any further.
:mad:
Has anyone ever seen or heard of something like this where StartLabelEdit goes haywire? Please help me if you can.
Thanks...
-Will
In a form, I have a listview control bound to a TreeView control.
By default LV considers "selected" the first item on the list even if it is not highlighted.
In Form is a command button that performs an operation on the item selected, but to prevent accidental activation requires two tests:
1) the list is not empty
Code:
If LV.ListItems.Count = 0 Then Exit Sub
2) an item is actually highlighted.
How can I make the second test?
Hello
I am using Access 2003(11.6355.6360) SPI
When I attempt to create a new DB - by performing Blank Database I immediately get a message 'Object Library not registered'.
If I 'OK' that box and try to create a table, I can do so - create Table in design view.
When I then try to Import external data - an excel file I get the message 'ActiveX component Can't create object'.
I have looked ob various sites for help and forum information regarding these errors but have found nothing conclusive, with specidfic regard to Access 2003.
The version has been loaded on my machine about 1 year as part pf Office Professional but this is the first time I have attempted to run Access itself.
Does any forum member have any ideas as to how this problem could be resolved.
Thank You
Rgds
Paul Langham
I am currently building a database for the company I work for that is fairly similar to the Northwind Database; however it is made from scratch so hopefully some of the common problems with that database won't find their way into mine.My problem is that when I go to my Orders form, I pick a customer from the main form, which creates a record on the Orders table. When I then go to the subform to choose a product/line item, I get the error in my title ("The LinkMasterFields property setting has produced this error: 'The object doesn't contain the Automation object 'OrdersT.") as soon as a product is chosen from the drop down list.
View 1 Replies View RelatedThe error is:
The LinkMasterFields property setting has produced this error: 'The object doesn't contain the Automation object 'tblIndividual.' '
Then it also gives me the same one on another table.
I think it has something to do with the link master/child fields. I've tried all kinds of relationships with the three tables and can't figure it out.
I've tried uploading the database here but it won't. It's on my Sky Drive.
[URL] .....
I'm getting an error message (informational only):
The object doesn't contain the automation object 'ClientID.'You tried to run a visual basic procedure to set a property or method for an object. However, the component doesn't make the property or method available for Automation operations.
Check the components documentation for information on the properties and methods it makes available for automation operations.
This happens when I start entering data in the field "productname" of a subform.
So I'm assuming something in the form or in the code of the form is referring to ClientID. but I've checked it, and there is nothing referring to it anymore. Well, at least as far as I'm aware of.
This afternoon access crashed without any error, it just closed. Upon reopening the DB again, all my work of the past one and a half week was gone. Normally I always backup the data, but these past days I didn't due to christmas and still working a lot too. So I forgot.
I did some redesigning in the process this evening, deleting and adding some fields and code.
I can't get rid of this error. Can anyone help? Or point me in the right direction?
Also the DB is 3.5MB in size. While it is completely empty. And I can't imagine that some empty tables, queries, forms and a bit of code can be so much. But that's for a later time to worry about I guess, unless one of you says: this and that, maybe that works... Otherwise, I would really be very glad already if the error disappears....
I am creating an form in a database and whenever one of my procedure's run it creates this error message:
The expression ON Load you entered as the event property setting produced the following error:
Member already exists in an object module from which this object module derives.
*The expression may not result in the name of a macro, the name of a user-defined function, or [event Procedure].
*There may have been an error evaluating the function, event, or macro.
An ideas?
Hi,
I got a Date field[Provdate-ontv] which only is allowed to set if another field, a Yes/No field[Prov-ontv] is set to Yes (default is no)
How do I do that ??
I've tried googling this, but I can't find anything helpful. I have five columns in my 'Main' table. In each row, column B, C & D are solely dependant on column A. And column E is completely independant of all of them. I want to be able to select a choice in column A using a drop-down menu (which I know how to do) and have columns B, C, & D automatically fill themselves in (which I don't know how to do). Column E I would just manually enter.
How do I get columns B, C, & D to automatically fill themselves in my 'Main' table. I would select a value from a drop-down menu in column A and want everything else to fill in. The values for A,B,C,& D are all in seperate tables with an ID and linked to their respective fields in the 'Main' table. Appreciate any help.
Hi
Does anyone know how I can auto fill all the records of a field by just entering it once
Thanks
I am looking to find the experssion that will allow me to put a date in a query under date completed and have it fill another field for schedule.
I know that in Excel it would be =sum(A1 +90 ) and this will give a date 90 days after the date inputed into field A1 and so on down the column. and it would auto fill the next column for me
Hello,
I'm new to access and i need help in filling a certain field with the same value.
In fact i have data representing one quarter of data and i need to add a column called "Quarter" in which i paste the same value: the current quarter : "Q4".
How can i do that?
I think this is a real simple issue.
Thanks in advance for your help.
Regards
sam
I have a table with three columns
Column A, Column B, Column C
in these 3 columns i have different values and in two fo these columns there are blanks. I want to search for this blanks and fill them in with a static value. But only the two columns.
How can i do this? Update Queries?
Thanks you
all I have this code that opens a table and fills in a blank field from the previous record.
Private Sub CopyField_click()
'Fill blank fields with previous record
Dim i As String
Set myDb = CurrentDb()
Set MyRs = myDb.OpenRecordset("ACHClosedAccts")
MyRs.MoveFirst
Do While Not MyRs.EOF
MyRs.Edit
For Each myfld In MyRs.Fields
If myfld.Name = "ClientNo" Then
If MyRs(myfld.Name).Value <> "" Then
i = MyRs(myfld.Name).Value
Else
MyRs(myfld.Name).Value = i
MyRs.Update
End If
End If
Next myfld
MyRs.MoveNext
Loop
End Sub
I need to use this code with multiple field names Where
myfld.name = "ClientNo"
I need it to also reference another field to do the same thing. Like:
myfld.name = "ClientNo" and "AcctNo"
It won't work with "And" or "Or". What can I do? I thought about an array but I don't know how to rewrite the code unsing an array.
Please help Thanks
In using a form to input new information, I want to utilize the autofill feature, but I don't know how.
For example. When someone inputs a month, I want the season to be automatically entered in, in the following entry.
Can someone please give me some direction or help me to do this!?
:D Thanks!
Hi
I have created a form with one unbound textbox and a command button.
How do I make sure that the query only runs if text is entered in the textbox?
I do not want the command button to run unless the textbox has data to query.
At the moment the Query runs and displays all records.
Hi
Newbie to your forum and a bit of a novice in access too.
I am building a db and a form that was previously able to be filled. When I altered the form and added some fields from a different table now just dings when I try to type in any of the old fields, but I can enter new data into the new field from the second table any ideas whats gone wrong.
I have searched through the properties and compared the new to old fields and can't really find any discrepency between the two.
Would it help if I posted the mdf file? (its only tiny)
Cheers
Mike
I have an access database with information that is posted to through a form. On the form I have a dropdown box with a list. After choosing an options I want a text box to auto fill from data in a separate table in the same access file. I have been trying different things for about a week, and I have done alot of reading.
View 2 Replies View RelatedI have a subform and when the controls on it are updated, changed from previous info, then I need a control(called dtmUpdate) to show the current date (=Date()).
How would I go about doing this?
Thank you
I am trying to auto fill feilds when I select from a combo box. I have tried to use help, but I can't get it right.
View 1 Replies View RelatedHello,
I need to be able to take information from a table in access, use this information to populate a PDF file, and then save the PDF file.
i.e. I have leads in a database and I want to pre-fill in application forms (PDF) for the clients.
I did some searching pertaining PDF, but didn't find exactly what I was looking for.
Where should I start?