hi,
i have written an sql statement to display fields from a table. but i want it to do this based on a date range (the user enters a parameter)
this can happen in access, but im using vb6 to do this and i dont know how to specify the parameter to wait for user input to filter the results
pls help
I have the following Select Statement:
SELECTTenant.ID, Tenant.[First Name], Tenant.[Last Name], Tenant.Address, Tenant.City, Tenant.State, Tenant.Zip, Tenant.[Home Phone], Tenant.[Cell Phone], Tenant.[Work Phone], Tenant.[Rented Unit],
Tenant.[Security Deposit], Tenant.[Move In], Tenant.[Move Out], Tenant.TenantID, Tenant.UnitID, Tenant.PropertyID, Tenant.OwnerID, Owner.Company, Owner.ID AS Expr1, Property.[Property Address],
[code]....
Now, I know that something in the UPDATE statement does not match my select statement.What should my Update Statement be, in order to update all the columns in the joined tables?
I have a query with the following criteria in one of the fields:
>=DateAdd("m",-12,fom()) And <=DateAdd("m",1,fom())
fom is a function for first of the current month. I need this query to be specific to what month it is when its ran so i want to only have this criteria if the month is > = october. If it isnt October or greater, i want the criteria to reflect this.
>=DateAdd("m",-12,fom()) And <=fom()
Which also works by itself. But when i add it to an iif statement it always produces no results. Below is the iif statement.
Iif(month(date())>=10, >=DateAdd("m",-12,fom()) And <=DateAdd("m",1,fom()),>=DateAdd("m",-12,fom()) And <=fom())
I have also added the column name to each expression and it still doesnt produce any results.
I am creating a multi-search form for a student database, where after I enter my search criteria I hit a "Run Query" command button and then it opens a query form with all of my criteria.So far I can search using last name, first name, and middle name. When I try to search with a start date and end date I am have issues.The start date and end date is for the class date. In the query form under the field, class date, for criteria I wrote:
Between IIf([Forms]![Search Form]![Start Date]="",1/1/10,[Forms]![Search Form]![Start Date]) And IIf([Forms]![Search Form]![End Date]="",4/25/15,[Forms]![Search Form]![End Date])
I want it when I write a date in the start date and end date I want it to give me a list of all the students who took the course between those dates. Also, if I leave the dates blank I want it to search all dates. The dates 1/1/10 and 4/25/15 are just the dates I gave because that is far back as my database goes.
I have created a report from the results of a query. The query has 2 parameters.
SELECT Nonconformances.DateRaised, Nonconformances.Customer
FROM Nonconformances
WHERE (((Nonconformances.DateRaised) Between [Enter start date] And [Enter end date])) OR (((Nonconformances.Customer) Like [Enter customer name] & "*"));
Now the problem is that I have been asked to add the search criteria to the report header. If the search criteria came from a form, no problem, but the user enters the criteria into a parameter box generated by the query. So if the start date was 1/5/05 and end date was 31/12/05 and the customer search was F.C, how do I capture this and show it on the report?
Any help appreciated.
Hi
When I want to run a form it prompts me to enter some parameters. I wonder what could have caused this issue?
Any help will be very much appreciated.
B
I have a date field. I have
Between [Please enter second begin date] And [Please enter second end date]
as my criteria so that the user may enter two dates. But, I want the extreme dates to be included in my data.
For Example: If the user enters 1/1/2005 and 1/31/2005, I want the information for the 1st and 31st to be included. How can I do this using just about the same criteria statement?
Below is a query in SQL view that is driving me crazy.
When ran it ask for a StartDate, EndDate, StartDate, EndDate.
Can someone please look and see if they can determin where the criteria is coming in from. In design view there is no criteria set up to ask for dates. Also, there is no parameter set in the parameters box.
SELECT tblBooksAndContracts.intTrackingNumber, tblGroupInformation.strGroupName, tblGroupInformation.strGroupNumber, tblSystems.ysnSystemWork, tblSystems.dtmSystemWorkComplete, tblGroupInformation.dtmDateMembershipReceived, tblGroupInformation.strRegion, tblBooksAndContracts.ysnNeedBook, tblBooksAndContracts.ysnNeedContract, tblBooksAndContracts.intBookAndContractCarveOut, CompareDates([tblBooksAndContracts].[dtmBookShipped],[tblBooksAndContracts].[dtmASODraftsSent]) AS [Book Complete], tblBooksAndContracts.dtmContractDistributedToMarke ting AS [Contract Complete], CompareDates([tblBooksAndContracts].[dtmBookShipped],[tblBooksAndContracts].[dtmASODraftsSent],[tblBooksAndContracts].[dtmContractDistributedToMarketing]) AS [B/C Complete], ([tblGroupInformation.dtmDateMembershipReceived]+[tblBooksAndContracts].[intBookAndContractCarveOut]+30) AS ECD, CompareDates([tblBooksAndContracts].[dtmBookShipped],[tblBooksAndContracts].[dtmASODraftsSent],[tblBooksAndContracts].[dtmContractDistributedToMarketing],[tblSystems].[dtmSystemWorkComplete],[tblGroupInformation].[dtmDateMembershipReceived]) AS [Master Complete Date], tblGroupInformation.dtmEffectiveDate, tblGroupInformation.strRegion, tblGroupInformation.strNRC
FROM (tblBooksAndContracts INNER JOIN tblSystems ON tblBooksAndContracts.intTrackingNumber = tblSystems.intTrackingNumber) INNER JOIN tblGroupInformation ON (tblSystems.intTrackingNumber = tblGroupInformation.intTrackingNumber) AND (tblBooksAndContracts.intTrackingNumber = tblGroupInformation.intTrackingNumber)
WHERE (((EntryIsComplete([ysnSystemWork],[dtmSystemWorkComplete],[ysnNeedIDCard],[dtmMailIDCards],[ysnNeedBook],[ysnNeedContract],[ysnNeedDraft],[ysnNeedFlyer],[ysnBookAndContractComplete]))=Yes) AND ((IsBetween([startDate],[endDate],[tblBooksAndContracts].[dtmBookShipped],[tblBooksAndContracts].[dtmASODraftsSent],[tblBooksAndContracts].[dtmContractDistributedToMarketing],[tblSystems].[dtmSystemWorkComplete],[dtmMailIDCards],[tblGroupInformation].[dtmDateMembershipReceived]))=Yes));
As well as when it does run, and you enter the span dates, if the field is blank it inputs 12:00 am in the field and includes it in the query. I checked the tables and it is not set up to input 12:00 am as a default value, nor is it stored as 12:00 am in the tables.
I am at my wits end here and any help/advice would be helpful.
If this does't make sense let me know and I will try and explain further.
Thanks in advance!
*please disregard the grammer, I am typing this fast before I head out to get the kids..a mommies job is never done!*:eek:
Please look at this sql statement and tell me where the error is. When I try to open the recordset, I get a "Too few parameters. Expected 1" error. That kind of error usually goes with missing # on dates or ' on text
DateTime is a DateTime field that defaults to Now().
The problem appears to be in the dates because when I comment out all after the user parameter, it works, and taking out the "AND Used Is Null" doesn't help.
sqlstr = "SELECT * " & _
"FROM tbl_Usage " & _
"WHERE User = '" & UsrNm & "' " & _
"AND DateTime >= #" & Date & "# and DateTime < #" & DateAdd("d", Date, 1) & "# AND Used Is Null"
This is from the immediate window
?sqlstr
SELECT * FROM tbl_Usage WHERE User = 's5ucba' AND DateTime >= #9/21/2006# and DateTime < #9/22/2006# AND Used Is Null
Hi
I am using 'Like "*" & [Forms]![Template]![Combo433] & "*"' in a query to a combo box on a form so if I have nothing selected in the combo all data is shown, except this does not show any null values!
Can any advise on how I can adapt this to allow for null values!
Thanks in advance...
I have designed an access database for an organisation. The database is basically all the people who work for an organisation, their addresses, the borough they work in and other details. I have deisgned a query that picks out all the people who work in a particular borough, by using parameters. So when I click a button, a box comes up and asks me to put in the borough and voila, I get a list of all the people who work in that borough. But what do I put in the parameter box, if I want the entire list of people in all the boroughs not just one particular borough?
Really appreciate the help...
I have a form that lets the user enter a beginning date and ending date in text boxes, then below that asks the user to choose a major category from a combo box. That works fine. The user the hits a command button below which opens a report. On the report is a chart based on the information they provide. This works well too. Also, the heading of my report contains the parameters in which the user gave to develop the report. The dates come up fine because I used a text box and put in =[Forms]![myformname]![parametername].
But this code does not work for a combo box. It will not pick up the choice that the user makes. Does anyone know how I can capture the answer so that I may display it in my report?
How would I go about creating a parameter that can search for all events that occurred in a particular month. I don't want the user to have know the exact date, just the month and year.
View 1 Replies View RelatedI have a report thats based on a table works well(thanks to the help from you guys) my problem is..When the parameter comes up to put in the customer name I would like to change that into a list box for spelling reasons, I have changed "customers" in all tables and quereies to look up list box but my parameter only comes up with a part for me to type the customer name.can this be changed? if so how please and I am a novice at this so please try and keep the help as straight forward as possible
cheers
Hi,
I have a Data Access Page which is generated on behalf of a query.
Query uses one parameter field ,so when is started it promts with the form named Enter Parameters in which I have to input parameter value.
So before the DAP is opened, first is displayed parameter form.
I would like to change dimensions of that form(height, width) but I dont know how.
I already tryied by opening DAP in design view & then in microsoft script editor but i couldn't find anything about this pop-up parameter form.
Any suggestions are wellcome:rolleyes:
I am trying to strengthen an already developed database at my work. They had a form with five different text boxes, each one that would run a seperate query on the same table, and the results would open on a different page. I am trying to combine all these text search parameters from the form to a single query and have the result come up on the form. I have done every search I can thing of from a forum search, a google search, and just reading through query forum posts for about a day; but I still cannot tell what is wrong. If someone could look at my code, and see if I have a mistake, or if I'm even in the right direction. :confused:
SELECT FLIGHTS.[FINISH OD], FLIGHTS.[PIPE OD/SHAFT OD], FLIGHTS.PITCH, FLIGHTS.[TYPE OF MATERIAL], FLIGHTS.[BURNED OD], FLIGHTS.[BURNED ID], FLIGHTS.[RIGHT/LEFT HAND], FLIGHTS.PartNumber, FLIGHTS.COMMENTS, FLIGHTS.[START TIME], FLIGHTS.[FINISH TIME], FLIGHTS.PurchaseOrderNumber, FLIGHTS.QTY
FROM FLIGHTS
WHERE ((FLIGHTS.[FINISH OD]=Forms![KNOWN BURN SIZES]!Text25 & "*") And (FLIGHTS.PITCH=Forms![KNOWN BURN SIZES]!text37 & "*") And (FLIGHTS.[TYPE OF MATERIAL]=Forms![KNOWN BURN SIZES]!Text32 & "*") And (FLIGHTS.PartNumber=Forms![KNOWN BURN SIZES]!Text0 & "*") And (FLIGHTS.PurchaseOrderNumber=Forms![KNOWN BURN SIZES]!text36 & "*"));
The FLIGHTS is the main table, [KNOWN BURN TABLES] is the form that the parameters are entered. I want users to be able to enter any fields they want and leave others blank. Currently all I get is a blank query. Sorry if the answer seems obvious; I tried avoiding posting till I knew that I couldn't figure it out on my own.
Thanks.
-Brian
After researching this issue I have not found a satisfactory solution to this issue.
I currently have 1 Access query that is the basis for my VBA code_ Sql statement. both Query statements work when debugged. However, I am getting this error on execution of the sql statement in my vba.
Dies here: '<<<<<<<<<<<<<<<<
Public Sub ConnectCMIS(spar As String)
Dim sConn As String
Dim oConn As ADODB.Connection
Dim lCnt As Long
Dim sSql, strSQL As String
Dim rstOra As ADODB.Recordset
Dim rsAccess As New ADODB.Recordset
Dim fld As ADODB.Field
On Error GoTo ErrorHandler
DoCmd.SetWarnings False
sConn = _
"Driver={Microsoft ODBC for Oracle};Server=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS =(PROTOCOL=TCP)" _
& _.;......
strSQL = "SELECT " & _
"MEASNO, FTEMNOMENCLATURE, NOMENCLATUREMODEL, " & _
"EquipID As EQUIPMENT_ID, MULTIPLE_ID, JOB_GROUP, " & _
"PROJECT, PRIORITY, IIf(Len(Trim(COMPLETE_BY_DATE)) > 0, Mid(COMPLETE_BY_DATE, 3, 2) & ""/"" & Mid(COMPLETE_BY_DATE, 5, 2) & ""/"" & Mid(COMPLETE_BY_DATE, 1, 2), Null) AS COMPLETEBYDATE, " & _
"RequestorId As REQUESTOR_ID, " & _
"CALIBRATION, REPAIR, MODIFICATION, ACCEPTANCE, EVALUATION, " & _
"MAINTENANCE, SUPPORT, CMIS_LAB, SERVICE_LAB, WORK_CODE, " & _
"CHARGE_NUMBER, DISPOSITION, ReqComments as REQUESTORCOMMENTS, INPUT_RANGE_MIN, " & _
"INPUT_RANGE_MAX, INPUT_UNITS, OUTPUT_RANGE_MIN, OUTPUT_RANGE_MAX, " & _
"OUTPUT_UNITS, GAIN, CUTOFF_FREQ, INPUT_FREQ, REF_FREQ, REF_VOLTAGE, " & _
"EXCIT_VOLTAGE, EXCIT_ENABLED, FTIR_ACCURACY, OFFSET, OFFSET_ENABLED, " & _
"REQ_EMO1, REQ_EMO2, REQ_EMO3, REQ_EMO4, REQ_EMO5, REQ_EMO6, " & _
"SPARECODE, CALIBRATION_ID " & _
"FROM QS_SRUpdatetoCMISdrt " & _
"WHERE job_group = " & Chr(39) & spar & Chr(39) & ""
Set rsAccess.ActiveConnection = CurrentProject.Connection
rsAccess.CursorType = adOpenStatic
Debug.Print strSQL
rsAccess.Open strSQL'<<<<<<<<<<<<<<<<
If rsAccess.EOF = False Then
Set oConn = New ADODB.Connection
oConn.Open sConn
Set rstOra = New ADODB.Recordset
rstOra.ActiveConnection = oConn
rstOra.CursorType = adOpenKeyset
rstOra.LockType = adLockOptimistic
rstOra.CursorLocation = adUseServer 'default
rstOra.Open "CMIS.UDV_RFS_SR"
Do While rsAccess.EOF = False
rstOra.AddNew 'Then where you add the Oracle record instead of individual assignments you have
On Error Resume Next
For Each fld In rsAccess.Fields
rstOra(fld.Name).Value = fld.Value
Next
rstOra.Update
rsAccess.MoveNext
Loop
End If
strSQL = "UPDATE CMIS.UDV_RFS_SR SET PROCESSED_IND = 'S' WHERE job_group = '" & spar & "'"
oConn.Execute strSQL, lCnt
DoCmd.RunSQL _
("UPDATE TA_SR SET PROCESSED_IND = 'S' WHERE Job_Group='" & spar & "'")
rstOra.Close
Set rstOra = Nothing
oConn.Close
Set oConn = Nothing
Call MsgBox("Submittal to CMIS has been processed.", vbInformation, "Process Submittal Complete")
SubExit:
On Error Resume Next
If Not oConn Is Nothing Then
Set oConn = Nothing
End If
rsAccess.Close
Set rsAccess = Nothing
Exit Sub
ErrorHandler:
MsgBox "Error Number = " & Err.Number & "-> " & Err.Description, vbExclamation, "CMISStatus"
Resume SubExit
End Sub
1st query:"QS_SRUpdatetoCMISdrt"
SELECT QS_TT_GeneralInfo.BEMS AS RequestorId, TA_SR.FTEMNomenclature, TA_SR.NomenclatureModel, tblEquipListingPerJobGroup.MeasNo, IIf([Primary]=True,[Equipment_ID],Null) AS EquipID, IIf([Additional]=True,[Equipment_ID],Null) AS Multiple_ID, TA_SR.Job_Group, TA_SR.Project, TA_SR.Priority, TA_SR.Complete_By_Date, TA_SR.Calibration, TA_SR.Repair, TA_SR.Modification, TA_SR.Acceptance, TA_SR.Evaluation, TA_SR.Maintenance, TA_SR.Support, TA_SR.Cmis_Lab, TA_SR.Service_Lab, TA_SR.Work_Code, TA_SR.Charge_Number, TA_SR.Disposition, TA_SR.Input_Range_Min, TA_SR.Input_Range_Max, TA_SR.Input_Units, TA_SR.Output_Range_Min, TA_SR.Output_Range_Max, TA_SR.Output_Units, TA_SR.Gain, TA_SR.Cutoff_Freq, TA_SR.Input_Freq, TA_SR.Ref_Freq, TA_SR.Ref_Voltage, TA_SR.Excit_Voltage, TA_SR.Excit_Enabled, TA_SR.FTIR_Accuracy, TA_SR.Offset, TA_SR.Offset_Enabled, TA_SR.REQ_EMO1, TA_SR.REQ_EMO2, TA_SR.REQ_EMO3, TA_SR.REQ_EMO4, TA_SR.REQ_EMO5, TA_SR.REQ_EMO6, TA_SR.SpareCode, TA_SR.CALIBRATION_ID, First(TA_SR.RequestorComments) AS ReqComments, "S" AS PROCESSED_IND, Now() AS LAST_UPDATE_DATE
FROM (TA_SR LEFT JOIN tblEquipListingPerJobGroup ON TA_SR.Job_Group = tblEquipListingPerJobGroup.Job_Group) LEFT JOIN QS_TT_GeneralInfo ON TA_SR.Requestor_ID = QS_TT_GeneralInfo.RequestorId
WHERE (((TA_SR.Job_Group)=[Forms]![FE_SRForm]![JobGroup]) AND ((TA_SR.SubmittedSR)=0))
GROUP BY QS_TT_GeneralInfo.BEMS, TA_SR.FTEMNomenclature, TA_SR.NomenclatureModel, tblEquipListingPerJobGroup.MeasNo, IIf([Primary]=True,[Equipment_ID],Null), IIf([Additional]=True,[Equipment_ID],Null), TA_SR.Job_Group, TA_SR.Project, TA_SR.Priority, TA_SR.Complete_By_Date, TA_SR.Calibration, TA_SR.Repair, TA_SR.Modification, TA_SR.Acceptance, TA_SR.Evaluation, TA_SR.Maintenance, TA_SR.Support, TA_SR.Cmis_Lab, TA_SR.Service_Lab, TA_SR.Work_Code, TA_SR.Charge_Number, TA_SR.Disposition, TA_SR.Input_Range_Min, TA_SR.Input_Range_Max, TA_SR.Input_Units, TA_SR.Output_Range_Min, TA_SR.Output_Range_Max, TA_SR.Output_Units, TA_SR.Gain, TA_SR.Cutoff_Freq, TA_SR.Input_Freq, TA_SR.Ref_Freq, TA_SR.Ref_Voltage, TA_SR.Excit_Voltage, TA_SR.Excit_Enabled, TA_SR.FTIR_Accuracy, TA_SR.Offset, TA_SR.Offset_Enabled, TA_SR.REQ_EMO1, TA_SR.REQ_EMO2, TA_SR.REQ_EMO3, TA_SR.REQ_EMO4, TA_SR.REQ_EMO5, TA_SR.REQ_EMO6, TA_SR.SpareCode, TA_SR.CALIBRATION_ID, "S", Now();
I am using Access to run my database. I am using Coldfusion to power the website. What I need to do is be able to update some fields. The problems first start in the select query, however.
There are two different forms. One that is a select box that has the options of "Buyers", "Sellers", "Newsletter". Onchange the select box (named "page"). When I submit that box it needs to populate a second box. That box is populated with the information found in the table that is selected in the first box.
Here is the query that it is using to get the information to populate:
SELECT RE.Information, RE.Page
FROM RE
WHERE (((RE.Page)="#form.page#"));
Does anyone see a problem?
Here's the result:
] Too few parameters. Expected 1.
The error occurred in D:Inetpubaheart4homeadmineditpages.cfm: line 10
8 : SELECT RE.Information, RE.Page
9 : FROM RE
10 : WHERE (((RE.Page)="#form.page#"));
11 : </cfquery>
12 : </cfif>
Thanks,
Brandon
What is the meaning of the (rightclick)menu, parameter option?
If i want to create a parameter query like
SELECT * FROM Table1 WHERE Field1 = [ParameterField1]
Why should i use the rightclick menu? What's the added value of this menu item?
Thx!
Guus
I often use forms to select a parameter & date range for a subsequent report. Where I have chosen to use multiple combo boxes (two in this case)to select more than one parameter I have run into a problem. The report opens ok the first time but if I close it (report) and change my selection then the report refuses to open. Should I just requery the two combo boxes, is there something else or can't it be fixed?
View 1 Replies View RelatedI need some help please on passing parameters such
as a recordsource to a report but not using OpenArgs
I heard that this can be done using a hidden form.
I have a calling form (form1) which opens a preview snapshot
form (form2) which in turn brings up a rptCurrentRecord (form3)
I can't get the openargs RecordSource SQL from form1 to form3
For arguments sake, Form3 in this case is really the report itself.
Hope this is not too confusing.
Thanks for any help
I have used the OpenArgs method to pass a parameter to another form, but I now need to psss two parameters, and I am not sure how to do this.
On Error GoTo Err_CmdOpenForm_Click
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "frmName"
DoCmd.OpenForm stDocName, , , , , , Me.Text0 'need to pass another
'Parameter Me.Text1
Exit_CmdOpenForm_Click:
Exit Sub
Err_CmdOpenForm_Click:
MsgBox Err.Description
Resume Exit_CmdOpenForm_Click
And on the Load event of frmName, Me.Text1 = Me.OpenArgs 'and Me.Text2
I have a parameter query with 5 possible user entries.
The criteria for all my fields is set up as follows:
Criteria: IIf(IsNull([Enter County]), "", [Enter County])
Or: Like "*" & [Enter County] & "*"
If the user enters something for 2 or more parameters it seems to work, but if they just enter a county, for example,, it gives an error message about the expression being too complex.
Any suggestions.
Thanks.
I've created a database where I have all the information for people like name, address, etc. Then there's a list box to choose what events they will be attending. I want to be able to run a report and see all the information for the people who are attending any specific event. Is there a way to create a form where I can click a button then it brings up the screen to choose the parameters of my report, then generates the report? Thanks!
View 4 Replies View RelatedI have a table with tons of rows with different times (among other things).
I want to 'group' all the times (this would be for one date and that's fine) into 4 or 5 spans. Without doing several querys where I type in for example: between14:49 and 23:59 etc. etc. How can I do this?
I have write the following code but on execution gives the following error. "Too few parameters. Expected.1"
the code is myQuery = "INSERT INTO SummaryHistory (HTimeStamp, HDiaryNo, HDiaryDate, HRecivedFrom, HSentTo, HReffrenceNo, HSentDate, HPageFrom, HPageTo, HRemarks, SummaryID) "
myQuery = myQuery + " VALUES ('" & myTimeStamp & _
"', '" & myDiaryNo & _
"', " & myDiaryDate & _
", '" & myRecivedFrom & _
"', '" & mySentTo & _
"', '" & myReffrenceNo & _
"', " & mySentDate & _
", " & myPageFrom & _
", " & myPageTo & _
", '" & myRemarks & _
"', " & myID & _
" )"
CurrentDb.Execute (myQuery)
on this last line its give error
any idea