hi,
i have a query that calculates totals per month.
I have 2 of those query's, and i would like to sum those totals once again, also sorted by month.
How should i proceed?
Thanks!
Matt
a request came accross my desk to find holidays sales in relation to the same days of the week for other weeks. For example, Thanksgivings sales compared to each of the 2 thursdays prior and the 2 thursdays after. Anyone know of a way of pulling this data so I have it all in one query - Thanksgiving, Thanksgiving+1, +2 and -1 and -2 (the numbers representing weeks from holiday
Thanks.
Brian.
Below is the code I have for a query that shows me the number of WorkUnits via a date range that is put in via calendars. This works great. It gives me one total for the date range. What I would like to be able to do is see the WorkUnit totals by month via a date range. If I put in the date range: Jan 1-April 30 I would like to get four WorkUnit totals instead of one. I would like to see the WorkUnit totals for each month. Can anyone assist with this? I asked a similar question like this yesterday but he SQL for this code is different and I have not been able to figure out how to apply yesterday's answer to this one. I have tried everything I can think of to no avail.
SELECT 'Total Work Units' AS FaultCategory, Count([WorkUnit]) AS [WU Totals]
FROM [Select Distinct [WorkUnit]
FROM WorkUnitsFaultsMainTBL
WHERE BuildID IN ("G004","E818","N005","F813","D024","C879") AND
PossibleCause NOT IN ("Out of Stock") AND
[TodaysDate] BETWEEN [Forms]![Queries_ReportsFRM]![StartDateTxt] AND
[Forms]![Queries_ReportsFRM]![EndDateTxt]]. AS vTbl;
Can someone tell me how to get year to date totals, month to date totals, week to dates in a query? I need to get all three for three different fields.
I was not able to get the totals with the formulas given. I received the totals for each day instead. Are there any other suggestions? I am trying to different formulas, but they are not working either. I did try doing different queries with the formulas to see if that would work.
Hey all! This is my first post. Been searching through the net all day trying to find a solution to this problem. Basically i have a table that looks like this (regular text is what i have and bolded text is what I need:Name Date Qty MOBrad 12/12/2007 23323 4423John 12/11/2007 3445 4432 John 12/11/2007 344 4432 John 12/11/2007 45 4432 John 12/11/2007 44 4432 John 12/11/2007 3445 4432 Grand Total: (Qty)And then I'd like to be able to carry this over and display a grand total at the bottom of every page of a report that I would need to generate. Our company produces forms and we sometimes have 60 - 70 people working on a single job. We want to see their hours individually but we would also like to see a grand sum of all their hours. If someone could help with this or needs more info let me know. Thanks for all your help!
View 14 Replies View RelatedI am trying to create a database that will keep track of the orders placed for a given part number by month. Currently, my table houses the part number, and the ordered amount for the past three years by month (there are thirty-five columns for every part). My column headings are ORDER_MAY_2013, etc. I would like to set a query up that will look at the column headings and pull the amounts ordered for each part for the past twelve months. In other words, I have three years of data in my table. In my query, I just want one year. However, I don't want to have to rewrite the query every month so that it will pick up the new data. Is there a way to accomplish this?
Is there a better way to build this database? I thought about just have four columns in my table - PART_NUMBER, ORDER_MONTH, ORDER_YEAR, ORDER_AMOUNT. The only problem there, is that every part (there are about 450 parts) would have to be listed 35+ times. That seemed too redundant to me, so I built the table this way. However, now I am having trouble querying against it.
I have a MS access table with 12 numerical columns for 12 Months payments for our customer base.
I need to calculate variance of payments month on month and identify set of customers who have made huge payments.
I have a table full of dates of meetings through out the year...
Example
tMeetingDates
16th August 2005
18th September 2005
19th October 2005
23rd November
-----
i also have a report that i print out each month that has the date of the meeting on it... i currently edit the date manually.
I was wondering if there was a way to automate this facility, so that the report looked to the table of dates and looked for the current Months Date that is stored i the table.
i then want this date to be displayed in the Report.
So in this instance if i am running a report for tomorrows meeting being the 19th October it would display that date in the report....regardless of when i run the report...
Obviously if i run the report on the first of November because the month has changed it would then display the date of the November Meeting...
we only ever have one meeting a month!!!!
Please help
Andy
Using Access 2010..I have form with a date on it. For this control I have show date picker set to "For dates" and lo and behold I get calendar! I can scroll through this calendar month by month. Great if I just want to go back or forward a month or three. What I'd like to be able to do is scroll through the calendar year by year. Can I do this with the method I'm using at the moment? If not is there a way round it that isn't over complicated?
View 6 Replies View RelatedHiI have a field that is text which holds the month in form "oct" etc. I need to pass the numerical value of that month to a function so how do I create an expression that will change it (in this instance) to 09.kind regards in advance.peter
View 5 Replies View RelatedI have a problem when I want to create an "ORDER" form, that will allow user to enter more than one order.
I have no clue how to do it.
please help me
i have a date field called open & i need to generate a query to count all entries by month, so far i can get all cases each day, but i'm unable to get the query to count them just based on the month & year..
any ideas please
Hello,
I've been looking through the archives and learnt a fair amount about date manipulation, but am still a bit stuck. I'm sure there is a way to do this and would appreciate any ideas:
Basically I am monitoring changes in Fuel level over months. For each month, I have a variety of readings, each on a different table, including sales from that tank, delivery in to it, and most importantly a closing dip reading taken at the end of the month.
In order to figure out the change in Fuel level over each month, you need an "opening" figure : this is taken to be the closing dip value of the previous month. And this is where I'm getting stuck!
I am writing a query to generate new table which combines all the relevent values. I have managed to link them through the date field, even though the specific date is not identical what matters is that it is the same month. Effectively I am trying to add a new 'column' showing the opening value, where opening value = previous months closing value for this tank.
I noticed there is a post talking about previous month data <a href="http://www.access-programmers.co.uk/forums/showthread.php?t=39708&highlight=previous+month">here</a>, which gives me some ideas but I'm not sure how to go about putting this into the SQL query. I can't use Date() because I'm interested in more than just previous to THIS month - the data spans back over a year!
I'm still learning Access so this might be a simple question - if so please point me to the relevent parts of the help file!
many thanks
Catherine
Hi there, I am fairly new to access and am having trouble doing what I need to do. I have a table that contains 2 number fields, 14 yes/no fields, and one text field. I want to be able to display the total number of yes's per field, and the total count of each individual value for the number and text fields.
I was able to make individual queries that count all of these, however I'm unsure how I can make a query that will do it all together, or how to put them all together.
I may be doing this wrong, or there may be a better way of doing this.
Any help would be greatly appreciated!
Thanks very much!
is there a way that i can get a total from a number on a form and a number on a sub-form (I want to add the numbers from the form and sub-form and have the total appear in a text box on the form)
View 3 Replies View Relatedi want a field to total up the amount of times a person apears in another table. does it involve using the greek version of E?
View 2 Replies View RelatedI am designing a new database for our life and disability department and they have several different policies where the base life insurance reduces at certain ages.
Please take a look at the scenarios listed below and give me any suggestions and tips on the best way to get this done. If you have any.
Below are the 12 scenarios:
1.) Reduces 75% at Age 70
2.) Age 65 to 70 the life amount is $9,000 and Age 70 and over the life amount is $6,000
3.) Reduces at age 65 by 92%, age 66 by 84.64%, age 67 by 77.869%, age 68 by 71.639%, age 69 by 65.908% and age 70 and over by 40%.
4.) On the day following the 70th birthday, the life amount will reduce to 70%. On the day following the 75th birthday the life amount will reduce to 40% of the 70th birthday reduced amount.
5.) On the Policy Anniversary Date following the 70th birthday - reduces 50%
6.) On the Premium Due Date following the 70th birthday, the life amount will reduce to 70%. On the Premium Due Date following the 75th birthday, life amount will reduce to 40% of the amount of the 70th birthday reduced amt.
7.) Age 65 life amount reduces to 65%. Age 70 life amount reduces to 35%. Age 75 life amount reduces to 25%.
8.) Terminates on the first of the month following the 65th birthday.
9.) Terminates Age 70
10.) Terminates on date of retirement or 1st or month following 70th birthday
11.) Terminates Age 65
12.) Never Reduces
Thanks for your time, Brian
Hi,
I'm trying to get a total which runs off of a query in a listbox (disguised as a textbox) to always show 1 decimal place. Right now, it'll show one decimal place only if the number is rational. If the number is whole, it doesn't show any.
E.g. For 8.5, it'll show 8.5
For 8, it'll show 8, not 8.0
I want it to show 8.0
Any help would be much appreciated.
folks,
I have two simple tables in a database. One Table is the entry table and the other is the totals. I then created a Form and a subform from the two tables. What I would like is to maintain running totals in the subform as entries are made in the entry table. Attached is the Database. Please help.
Hi i have two problems.
I am creating a football dream team database with two tables:
Team table - Team ID, Team Name, Player 1, Player 2, Player 3, Player 4, Player 5, Player 6, Player 7, Player 8, Player 9, Player 10, Player 11 and Points Total,
All the player columns are lookup functions which are linked to player table
players table - Player ID, PLayer Name, Position, Club, Value, Points
My problem is i cannot figure out how to calculate the points total in the team table from inputting the points into the player table.
I also would like to know how to create a 'total' column by adding together other columns in a table.
Thanks in advance
I have a table. The table stores a workers name and information such as Primary Station Verified.
The Primary Station Verified is a yes/no checkbox. It also has the dates that each worker is verified.
I want to do a query that will show me the total number of people and out of that total number of
people how many are verified. Then I will turn that data into a graph.
How do I do the Query to show me (example) There are 50 people and (example) 25 of them are
verified? I know how to do the query to show all of the people and who are verified but I just want
the numbers.
I'm needing help with a totals query. I have a table with a Department field, a charge field, and a charge code field.
I'm running a query that first groups by the department, then uses the max function to give me the highest charge within that department. For the third field of the query, I want to return the charge code that aligns with the highest charge, unfortunately none of the general totals seem to work and I can't figure out an expression to work either
I have a table where 4 different people enter their amount of work sheets they complete each day via a form. Each person could have a different total each day. Example:
AJ=5
CH=10
MH=7
CA=3
Each person will have a entry for each work day of the month.
I am creating a query that needs to show each persons total for a month. I know how to get the month but how can I total each persons page count all together and then separately? Example:
All four combined total page count
AJ Page count individually
CH page count individually
MH page count individually
Ca page count individually
Thanks for all help
I'm trying to make totals in a query, but instead of using all, I need to leave one out, how to do that? for example the table looks like:
A 2 3
B 4 6
C 2 5
D 3 5
E 2 3
How can I leave row 1 out? So that the query will look like:
11 19
I have two tables, one for budget and the other for actual expenditure. I need a query or queries that will give me a cumulative figure on 3 groups based on the expenditure table. In my expenditure table I have the following fields.
ExpenditureID Autonumber
Period Text
CostCentre Text
CostCode Text
Value Currency
fldDate Short Date
I have managed to fnd a function that will give me a running sum for each individual group, but cannot seem to get it to work for more than 1 group. The function is this.
Function fncRunSum(lngCatID As Long, lngUnits As Long) As Long
'Variables that retain their values.
Static lngID As Long
Static lngAmt As Long
If lngID <> lngCatID Then
'If the current ID does not match the last ID, then (re)initialize.
lngID = lngCatID
lngAmt = lngUnits
Else
'If the current ID matches the last, keep a running sum for the ID.
lngAmt = lngAmt + lngUnits
End If
'Pass the running sum back to the query.
fncRunSum = lngAmt
End Function
Is there any way I can see the results in one query or table? Any help appreciated.
Hi,
I'm having trouble trying to create an expression for generating cumulative totals by Month.
I believe this is the function I need to use -
DSum (expression, domain, [criteria] )
I need the layout to be as follows -
Months - Rows
Cumulative Monthly Despatches - Column
I have a field list with
Months
Despatches
Models
All of these are from another Query and 'Despatches' is an expression generated in the other query
Can anyone please Help?!