It all works pretty much fine, however, the problem occurs because the iif statement tells the code to use either the fixed_price_list table or the price_list table depending on the value of Use_fixed. the iif works fine, its the WHERE clause. because the iif statements tell the query to look at one table or the other, the WHERE clause includes statements from both tables e.g.
queryString2 = queryString2 & " AND price_list.min_quantity <= part_select.quantity "
queryString2 = queryString2 & " AND fixed_price_list.min_quantity <= part_select.quantity "
but some parts dont have information within the fixed_price_list table, and thus are not being found in the results due to the WHERE clause. can anyone help?? i tried using a left join but it didnt work how i wanted. in a perfect world i would be able to include a iif statement in the where clause e.g.
queryString2 = queryString2 & " iif Use_fixed =1, AND price_list.min_quantity <= part_select.quantity, AND fixed_price_list.min_quantity <= part_select.quantity) "
Can anyone give me any guidance on how to use IFF statements in microsoft access? or Has anyone got a link to a good website that can help me? I need to use the formula below to determine if the quantity of an order from a store is greater than the quantity that is in stock at the warehouse and produce a message message.IIF([quantityordered])(=[quantityinstock]"enoughstock","notenoughstock") I just dont know where to start, i didnt even know you could enter formulas in Microsoft Access so i really need help
Hi, I have another problem with my Access database now...
I am trying to disable fields when a certain value is chosen. I can do it for one field with this code:
If ALLOCATION_LP = "Other" Then OTHER_ALLOCATION_LP.Enabled = True Else OTHER_ALLOCATION_LP.Enabled = False End If
That one works perfectly well, but I have another one that needs to disable two fields instead. If they choose "No Extant PP", I want it to disable two fields; one combo box - PLNG_PERMISSION_STATUS_2 (which I can get to and it works) and also an "Other" text box - OTHER_PLNG_PERMISSION_STATUS_2 (this is where i get stuck). I have tried two If statements, but whether I'm writing them wrong, I'm not sure.
'construct a where clause as required If Nz(Me.Manufacturer.Text, "") <> "" Then Where1 = "WHERE MFRcode LIKE '*" & Me.Manufacturer.Column(0) & "*' " End If
Me.list.RowSource = _ "SELECT ID, Description, Par, MaxCoins, PayLines " & _ "FROM MachineTypeQuery " & _ Where1, Where2 & _ <- how do i get something like this to work "ORDER BY Description;"
Exit Sub Where2 comes from another control and has to be filled in before they get to this control. also "where1" and "where2" are set as public stings
I want to check eight Yes/No fields. If none of the boxes are checked I want to display a msgbox. I can link seven of the fields (no problem), when I add the eighth it doesn't work.
Am I limited to seven fields in my statement? Is there a way around this?
Any help would be appreciated.
============
If Me.Printer = 0 And Me.Hardware = 0 And Me.Software = 0 And Me.MSOffice = 0 And Me.Network = 0 And Me.NewComputer = 0 And Me.Profile = 0 And Me.Other = 0 Then
MsgBox "You must enter the type of problem(s) addressed with this customer", vbQuestion, "Type of Problem(s)"
My database has a field named "Note". This field will either have a "Y" or "N" in it. At the bottom of a report I'm writing, I want to count the number of "Y's" (not the "N's") at the bottom of my report. Can someone tell me how to do this? Thanks so much in advance!
i have a list of values that i'm trying to run through an iif, like so:
IIf(([Warehouse Location].[ToAISLE] Like "1" Or "2" Or "3" Or "4" Or "5" Or "6" Or "7" Or "8" Or "9" Or "10"),([Product Inventory with totals].[Available]+[Warehouse Location].[Qty]))
im doing that in a query, not the vb code. now heres my problem: that's not the correct syntax for the Like blah blah blah part. does anybody know the correct syntax for this?
Within my database I have 5 fields that will have either "Yes" or "No" data. I want to be able to have one of these fields look at the 4 others and if they meet a condition have the background of the field change colors.Here's a breakdown of what I'm trying to do:
Field1 Field2 Field3 Field4 Field5
Yes Yes Yes Yes No No No No No Yes
If Field5 has a "Yes" and Fields 1,2,3,4 are all "No" then I want Field 5 background to change color to indicate that a criteria was met.
and i needed a return (WHERE clause) when job_id is the same (i.e 2), and the crew_id is repeated like 4,4 and 33, how would i write it. I am trying to only sum the rows when this condition is fulfilled. Can anyoen help me
Could anyone explain me the following sysntax : ... where ((cond1 and cond2) and (fld1<>'54')<>'60') the syntax did not return any error while executing the query.
I have an select statment that pulls data from a server. This server is really slow, and there is quite a bit of data. This statement has the following where clause.
"WHERE upc_number = '" & strPikWhere & "' AND ((dbo_root_description_type.description_name)='PFM S' Or " & _
"(dbo_root_description_type.description_name)='Full tech') AND ((dbo_root_price.zone) Not Like '8*') " & _
I was wondering if the order of these where statements would make a difference, and if so how?
I have a query using the between clause with dates #01/01/2006# and #01/01/2007#. I have been reading a little on the between clause and it differs from SQL program to SQL program. What are its characteristics in MS Access is it >=#01/01/2006# AND <=#01/01/2007# or >=#01/01/2006# AND <#01/01/2007#.
When I do a Debug Print for where I get cardnumber = 1111111 The card number is a string because it might have a letter in it don't i need it to be cardnumber = "1111111"
I have a table "addresses" that has the following fields....... id - type - street1 - street2
and type can be one of the follwoing graduation,home,work
I am trying to write a query that gives the graduation address if it exists or if graduation doesnt exist it gives the home address..... I was thinking of an If clause but do not know how to do it.... can i write a module...??? Any help on this is appreciated..... Any other method also can be suggested....
Hi. I need to export a set of sql statements from my Microsoft Access database in order to put it into my new mySql server. I know that its possible to get the statements off the mysql database, but i cant figure out how to do it in microsoft access. Any help is appreciated
Hello. I have a problem implementing two separate SQL statements in dreamweaver from an Access 2003 database. The queries work fine in Access but is causing many problems in dreamweaver as they are separated.
I very much so need help in combining these two statements to form one SQL statement. Any help will be greatly appreciated. Thanks again.
SQL Statements
FIRST QUERY
SELECT tblApp.Time FROM tblApp WHERE (((tblApp.BranchID)=[Forms]![frmApp]![branch]) AND ((tblApp.Date)=[Forms]![frmApp]![date]));
SECOND QUERY
SELECT tblTime.Time FROM tblTime LEFT JOIN qryAppointmentsOnDate ON tblTime.Time = qryAppointmentsOnDate.Time WHERE (((tblTime.Branch)=[Forms]![frmApp]![branch]) AND ((qryAppointmentsOnDate.Time) Is Null));
I've got a query that is defeating me, but that might be due to a week's worth of insomnia related sleep problems. My issue exists in the following query, of the four IIF statments in the HAVING portion of the query and the need to select all if the statement is false for each one of the four queries, the way it is now partly works by returning all results where none of the values are null, I need to get null results as well. I've tried not including the false action for them, a wildcard to select all and just can't get around this problem. Any help appreciated.
SELECT DISTINCT vw_mdb_SalesSummary.Channel, vw_mdb_SalesSummary.Store_Number, [AOI Category groups].ProductType AS Category, dbo_Contact.Source_of_Inquiry, dbo_Company.Rn_Descriptor AS Store_Name, vw_mdb_SalesSummary.Job_Number, Sum(vw_mdb_SalesSummary.Extended_Price) AS Sales1, vw_mdb_SalesSummary.Designer_Code, vw_mdb_SalesSummary.Manager_Code, 0 AS Sales2
FROM ((dbo_Company RIGHT JOIN vw_mdb_SalesSummary ON dbo_Company.Store_Number = vw_mdb_SalesSummary.Store_Number) LEFT JOIN dbo_Contact ON vw_mdb_SalesSummary.Job_Number = dbo_Contact.Job_Number) LEFT JOIN [AOI Category groups] ON vw_mdb_SalesSummary.Category = [AOI Category groups].SalesCategory
WHERE (((vw_mdb_SalesSummary.Order_Date) Between [Forms]![frmLandS]![currentStart] And [Forms]![frmLandS]![currentEnd]))
GROUP BY vw_mdb_SalesSummary.Channel, vw_mdb_SalesSummary.Store_Number, [AOI Category groups].ProductType, dbo_Contact.Source_of_Inquiry, dbo_Company.Rn_Descriptor, vw_mdb_SalesSummary.Job_Number, vw_mdb_SalesSummary.Designer_Code, vw_mdb_SalesSummary.Manager_Code, 0
HAVING (((vw_mdb_SalesSummary.Channel)=IIf([Forms]![frmLandS]![Channel]<>"",[Forms]![frmLandS]![Channel],[Channel])) AND ((vw_mdb_SalesSummary.Store_Number)=IIf([Forms]![frmLandS]![Store]<>"",[Forms]![frmLandS]![Store],[vw_mdb_SalesSummary]![Store_Number])) AND (([AOI Category groups].ProductType)=IIf([Forms]![frmLandS]![AOI]<>"",[Forms]![frmLandS]![AOI],[ProductType])) AND ((dbo_Contact.Source_of_Inquiry)=IIf([Forms]![frmLandS]![source]<>"",[Forms]![frmLandS]![source],[Source_of_Inquiry])));
I have a large database with about 200 queries. I am having a problem with the last few I added. I run them from VB. When I run them the SQL statement disappears, sometimes. If I go to the SQL View instead of the Design veiw all that is left is Select;. I the Design View there is nothing.
This should be simple! I'm looking at something wrong. I have two If-Else statements on the "onCurrent event of a form. ONly the first one fires. Is there something rong with the syntax???
Private Sub Form_Current()
If Me.OptInterviewed.Value = -1 Then Me.InterviewDate.Visible = True Else Me.InterviewDate.Visible = False
If Me.OrientationDate.Value = -1 Then Me.OrientationDate.Visible = True Else Me.OrientationDate.Visible = False
I have a query which works fine for one if statement, but i neewd to have 10, whats the best way of sorting this, can it be done in one query, or should i use a module or should i use the code?
Basically I'm trying to write a query that has 2 IIF statements. The process is pretty straight forward but I'm getting weird errors. What's supposed to happen is it creates a CDN List Price from the cost based on a P or M code.
Once the CDN List Price is calculated it's supposed to calculate a US list price based on the P or M code.
If I remove the second IIF statement and run the query everything works out fine and it displays the results in a table. With the second statement in I run query and a box pops up asking me to input to CDNlist PMT code. I can put it in but the calculated valves are way off.
Can anyone help?
Thanks!
Steve.
SELECT [updatedCosts].[ID], [updatedCosts].[ITEM], [updatedCosts].[description], [updatedCosts].[PMTcode], [updatedCosts].[Cost2004], [updatedCosts].[updatedBy], IIf([updatedCosts]![PMTcode]="M",[updatedCosts]![Cost2004]*2.3809,[updatedCosts]![Cost2004]*2.1978 AS CDNlist, IIf([updatedCosts]![PMTcode]="M",[CDNlist]/1.2,[CDNlist]/1.33)) AS USList FROM updatedCosts;
Hello I have a report reading off of a query, the query shows an #Error whenever the 0 spend is divided by the 0 potential. In the report i would like this #Error to show as N/A. I tried =IIf([BY PROGRAM BY UNIT 30 DAYS.AdminRate]="#Error","N/A",[BY PROGRAM BY UNIT 30 DAYS.AdminRate]) but it doesn't work. can you suggest something else?
