Input Value Based On Textbox Entry
Sep 28, 2006basically i have a textbox called
'mytext'
when my user types t1 in that textbox, and tabs to the next field, i want the value LHR - T1 to be placed inside 'mytext'
how can i do this?
basically i have a textbox called
'mytext'
when my user types t1 in that textbox, and tabs to the next field, i want the value LHR - T1 to be placed inside 'mytext'
how can i do this?
Making a small database, Got 1 Table.
1. ContactDetailTable
Got 3 forms.
1. ContactIDForm
2. ContactInfoForm
3. NewContactFrom
In ContactIDForm it contain 1 textbox name 'TextBox' with Button Name 'Btn'
In ContactIDForm there is only 1 Text Box ContactIDTextBox and 1 Button. User Enters ID in TextBox and On Button Click Event it should check data from TextBox in Table name (ContactDetailTable) in field ContactID and if there is record matching, ContactInfoForm should Open else NewContactForm should open with ContactIDTextBox value in it.
I have a database that makes use of standing orders. That means that if a client has a standing order to receive products during for example 4 time as year (quartely at the end of the month). to automate the new entry by copying an old entry in the database.
Let's say I have a client where we will have to send a product at the end of June, it will look at a field where the next send date is, and when it reaches 2 weeks for that date, to create a new entry in the database based on that entry. This way, it will pop-up in our open cases and we are aware of it and also will be visible in our report.
I need to be able to query the service dates for the bill. So I can query 1509 for the .billYYMM and .readdate and it will give me the TO Date. How do I in the same query tell the query to subtract 1 from the BillYYMM that I just entered and give me the read date for that field in that query? So Query 1 MBRHISTDETL.BILLMOYR and in the criteria box use [Enter the Bill Month Year YYMM you want to search for] will allow me to run the query at any time for any bill month year that I enter. So another field in that query is MBRHISTDETL.READDATE. So to get the FROM date and the TO date i need the following MRBHISTDETL.BILLMOYR (whatever I enter as input) and MBRHISTDETL.READDATE that corresponds and then I need [MRBHISTDETL.BILLMOYR]-1 and MBRHISTDETL.READDATE. The first gives me the TO date and the 2nd gives me the FROM date?
View 5 Replies View RelatedHi all,
This should be straightforward, i have an input mask on a textbox as: 00/00/00;0;" " and have the format as: short date. This works but get a problem if the user enters a date say: 33/02/05, I want it to give me an error, it does not it automatically changes it to format 02/05/33. I want the input mask to allow valid previous and present dates but not future. Any help appreciated, thanks in advance,
M-.
Dear All:
I have created a form using access 2000. So far, this form already has data and dates in a combox in this format: mm/dd/yyyy.
In the AfterUpdate of the date combobox, I did this:
If graduation_date = #2/1/2004# then
Text_Graduation_date = "dated this first day of february two thousand four."
End If
End Sub
In addition, I have defined many other dates as well using the code above. It works well when I choose the date form the combobox, the other textbox populates, but there are so many more dates in the combo!
Is there a way to auto-populate the textbox with the appropriate text as I scroll through the form?
Thanks,
Dion
I want to put a textbox on a form that will take user input (a postal code) and put it into a table. I'm not sure how to do this. Is it even possible, and if so, any suggestions?
View 6 Replies View RelatedI have a table with a field named 'Comments'. On the form, I would like to have a text input and a command button. After the user enter the comments onto the textbox and subsequently click on the command button, the comments will be input onto the 'Comments' field of the table.
Q1. How can the text box be link to the 'Comments' field of the table?
Q2. Only after I press the command button then the input text on the text box will be transfer to the table. What is the command for that?
I have a textbox and a command button by this textbox that performs an action based on the value in this textbox when clicked.
I want to be able to press the enter key after entry into the textbox and have it perform the same thing the command button does.
I tried Calling the commndbutton procedure from the OnEnter event from of textbox, but it tries to process as soon as i "start entering data into the textbox".
I hope i am clear? How do i achieve this, so that by pressing the enter key after entering a value in my textbox, my textbox value is processed, instead of clicking the command button.
This is just to enhance usability. Any help will be mucho appreciatied :D
I have a text box whose value is stored in a table. The column which it stores its value is of format "text" and has size "5".
What I want is for the user NOT to enter more than 5 characters!! I don't want a msgbox popping up on the screen, I want is that the user cannot enter more than 5 characters...!!
How do I do it??
I want to put a textbox on a form that will take user input (a zip code) and put it into a table. I'm not sure how to do this. Is it even possible, and if so, any suggestions?
View 3 Replies View RelatedI have a form bound to a table, with a subform in there, and I have a textbox with a source one of the table's fields. I would like the value of this textbox to be calculated based on the values of some boxes in the subform, but I also wont to be able to edit the value on the textbox myself.
Is it possible to have a textbox that get its value both from calucaltions and user input?
My table have orderid along with other columns, i want to create a form where i am having a textbox for order id input by user. Firstly when user sees the form its only with the textbox and table fields, when i put the order id in the textbox the listing should be made.
View 1 Replies View RelatedI have a problem that is probably very straightforward to you Access experts.
A brief description of the salient parts of my setup are given as numbered paras below.
1... I have 2 tables: Jobs and Sessions in a defined 1 to many relationship.
2... I have defined a form in parent-child format with the child (session) records displayed in single line (continuous) mode.
3... The above works as intended, ie as different jobs are selected (via combobox or bespoke navigation arrows), so the relevant session lines appear. I have removed both record selectors and default navigation buttons from both form and subform.
4... Because all but one (a simple text description) fields are auto or calculated, I do not want the user (Yes ... it's me ... but It could be someone else ... if I drop dead) to attempt to input via the form, since it causes problems for some of the calculated fields. :(
QUESTION A. How can I suppress the record entry part (bottom line) of my session one-liners subform? (The problem doesn't arise with the main job page-mode form, since the removal of the default navigation makes it impossible to add a job via the form).
QUESTION B. What code do I need to create a new session for a defined job via a simple dialog box or bespoke form which requires only two input parameters: jobname and sessiondescription. (All other fields are calculated automatically from today's date and jobname)
5... I currently perform input using the jobs table (ie selecting the relevant job), expanding the (sub)sessions table and then adding a session description ... but this is not so user-friendly!
I would appreciate any help and/or relevant comments.
How do I apply this - can't seem to get it right - just want to control user into putting whatever and two deciimals for pence.
99.99 input mask is halfway there - except I don't want to limit the pounds amount. putting 99999.99 makes entering 12.31 etc a little awkward.
Cheers
I have a date entry textbox.
The user is copying a date from an old form.
Sometimes the form will have the date entered as 00/00/97
How can I change the month and day to 01/01 and of course leave the year as it was.
I've tried using split with no success.
Is it possible to have a text box momentarily show the character that is input, and then hide it with a dot (or similar)?
This is for password input so that users can see momentarily, but others won't be able to.
I'm trying to build a search form.- Access 2007
I have a table (Table1), contains a 'part' field.
I wan to build a form with a blank text box (txtbx1) where users can enter a part description, this will search records in Table1>part and return a list of parts that match the textbox input.
Here's what I've done -
txtbx1 - property sheet - control source - part
event - on enter - ...
I've built an expression -
[Table1]![part] = [txtbx1]
hoping that this would match records 1n Table1 to txtbx1
table name : Schedule
Field 1 = Vessel code
Field 2 = Voyage
Field 3 = ETA
Field 4 = berthed
Field 5 = Sailed
there is a query by using above table and data entry form based on that query.
need to add following facilitate
While data entering, if given voyage number is already exist for the particular vessel code, msg should be pop up immediately at that time saying " This voyage number is already exist"
How could this be manage ?
I have two linked tables as follows:
Table 1
Main Service ID (primary key)
Main Service
Table 2
Sub Service ID (primary key)
Sub Service
Main Service ID (foreign key)
one-to-many relationship
I would like to query the tables, so you search on the Sub Service and it returns all of the Main Services it come under. I would like this query to run off an Input Box that will allow me to type in the Sub Service or a word.
I have managed to get the Input Box, by putting the following code into the criteria :InputBox («prompt», «title», «default», «xpos», «ypos»). But when I type something in the search fails. I have chopped and changed the fields I search on, but can't get it quite right.
Can anyone help me on what fields to choose and what I need to set in the criteria to get the search running properly from the input box?
Also is there any way to program Access or VB to return the results in a message box e.g. **** is a Sub Service of ***** - listing all main services it appears under?
Any help is most appreciated,
Thanks,
Luke
Hi.
I am sure this is simple......!
I would like a textbox that is based on whatever is set in the Application Title in the startup function.
I have seen threads for changing the AppTitle, but not just for a textbox base on AppTitle.
Can anyone help?
Many Thanks.
Frank.
Hi,
can anyone help? i need to have a textbox show a value from a table based on a combo box selection.
example:
combo box selects part i.e. laminate and the text box shows the price.
any help greatly appreciated.
regs,
NS
I have a data entry form for Table-A. After I enter an account on the form, I use the account to get a value from a different table and put that value in another combobox. I tried using a SetValue to fill the combobox. I put the SELECT statement from a query in the Expression parameter. But Access doesn't accept that Expression and produces an error message about "Forms" not being a field. This has got to be a common action in forms, so there must be a better way to do this.
View 2 Replies View RelatedHeeelo all:
I have a from based on a query. This form has a textbox called CUM_GPA which contains numbers in this format: x.xxx
In the After_update of CUM_GPA is this code:
Private Sub CUM_GPA_AfterUpdate()
If Division = "GRADUATE" Then
Honors2 = ""
ElseIf Division = "UNDERGRADUATE" And CUM_GPA < 3.2 Then
Honors2 = ""
ElseIf CUM_GPA >= 3.2 And CUM_GPA < 3.5 Then
Honors2 = "*"
ElseIf CUM_GPA >= 3.5 And CUM_GPA < 3.8 Then
Honors2 = "**"
ElseIf CUM_GPA >= 3.8 Then
Honors2 = "***"
End If
If Division = "GRADUATE" And School = "SCHOOL OF EDUCATION" And CUM_GPA >= 3.7 Then
Honors2 = "+"
End If
end sub
The textbox called Honors2 returns nothing. Any help is greatly appreciated.
Regards,
Dee
I am building a form in access and I am trying to find a way where user input isn't possible in the associated textbox when "No" from on option box is selected.
View 3 Replies View RelatedI an trying to create a data entry form (IndividualsEntryFm) to input data for fields such as (First Name),(Birthdate) etc., these to be saved to the (IndividualsTbl)
I also have another table (NamesTbl) which has family names etc. The two tables are linked by a (MainID) field. I want a combo box on the individualsEntryFm so that I can select the family name. Then I wish the empty fields for the IndividualsTbl to be available to enter data.When I press the save button I then want this data saved, together with the MainID from the combo box to the IndividualsTbl.
I have set the IndividualsTbl with a (PersonID) field as an auto number each individual therefore has a unique PersonID but may well share the MainID. I'm trying to link many people to the same address.