Is There An Event For When The User Presses Enter

Nov 28, 2006

if my user presses enter while in a control on the form.. how can you code that event.

View Replies


ADVERTISEMENT

Modules & VBA :: Checking For Key Presses In On Click Event

Jul 25, 2014

I have a button on a form and I want the On Click event behind it to check whether Shift is also being pressed when the user clicks the button (or Ctrl, or Alt, in fact any damn key will do).

I can't believe that there isn't a function in VBA like the old 1980s BASIC 'inkey' function (etc) that just simply returns the code of any key being held down at the time of the scan. I shouldn't have to mess around programming other events like KeyDown and KeyUp when I don't particularly need the key-press to trigger an event per se.

View 7 Replies View Related

Confirm Undo (when User Presses Esc Key)

Nov 10, 2006

I have a small procedure I'd like to include in my database. I want to confirm with the user with some sort of modal popup message (I think that's the right term) when they abort data entry on a form (anywhere on that form which consists of several pages, and a linked subform on one page). I think I can use the "on undo" event, but I don't know what code to include to make this happen...

Tried searching for this to no avail, but I would think this is a common procedure to prevent users from accidental data entry abortion.

Thanks,
Brad

View 4 Replies View Related

Simulate Event After Enter Key Is Hit?

Apr 21, 2005

I have a form with 3 textboxes. Data in any one of them will be used in a query which is run currently through a command button.

I want to run the query after the user hits Enter in the textbox after their data.

I could use the 'after_Update' event but this activates when focus is lost from the text box, or on Tabs etc - not the intended function.

Any way to simulate this? (trap the chr of the Key?)

tx

View 1 Replies View Related

Enter New Data Event

Nov 7, 2005

Hi, I am not entirely sure where to look in the forum to answer this question, maybe someone can help me. I am just trying to create a simple code that would open a form if a user enter in a field a value that never has been entered before and open a other different form if the user enter a value already recorded. I can't find a 'not in recordset event', but there must be a way as when the form is set to Data entry with no duplicates an event occurs depending on the data being already recorded or not.

View 5 Replies View Related

Want To Cancel On Enter Event

Jan 26, 2005

i dont want a user to be able to change a value in a combo box if a textbox is not null.
im not sure what to add on the onenter event. is there not somthing like cancel=true

View 2 Replies View Related

Forms :: Enter Attendance At Event?

Jan 22, 2015

I have a database with three tables:

Participants (with name...), Events (with Event Name, date..., Event Attendance (Participant ID, Event ID, Date).

Relationships all work and reporting works. I now want to create a form for entering attendance into a single event as a batch. I only want to enter the event ID one time and then be able to enter participant ID's for all attendees. The event coordinator will have a tablet running the db at the door and each participant will use their ID card to be scanned into the event.

I don't want the coordinator to have to reselect the correct event between each participants scan but instead to enter the event once and have multiple participants ID's entered for the one event. The date field is defaulting to current date/time [Now()].

View 6 Replies View Related

Forms :: Enter / Return Key - Does Not Fire Event

Jul 1, 2015

when pressing the return key (in a textbox field within a form) an action should be fired, but it does not.

here is my code:
************************
Private Sub txmyTextbox_KeyPress(KeyAscii As Integer)
If KeyAscii = 13 Then
MsgBox "Return key pressed"
End If
End Sub
*****************

View 2 Replies View Related

Calc User Totals Table 1 And Enter In User Records In Table 2

Oct 28, 2004

I have two tables. The first contains details of a budget holders money allocation for a given period, and the other tracks their spend on products over that period. How can I generate a query to calculate the total running spend for each user from the "budget spend table" that will be written into the users record in the "budget allocation table".

My aim is to show details of budget allocation, total spend to date and remaining budget for each user in an Order form / report.

Can anyone please advise me on how to do this or suggest another way of doing it. Any help would be greatly appreciated.

Thanks in advance.

Regards Peter

View 5 Replies View Related

Let The User Enter The Field They Wish To See

Aug 18, 2005

Hi all

Can a SQL query be written so that when the user runs the query, a prompt asks the user to enter the field they wish to see?

i.e. a query is written to return certain predefined fields, plus a field that is not defined. When the query runs an error comes up to enter the field it should search for.

It would be handy for the start of each month, when a new field (month's data) is required. It will avoid updating the query each month.

Thanks in advance!!

Lucas

View 1 Replies View Related

User Enter Data To A Query

Jun 29, 2005

I am trying to build a query that would be pulled by indaviduals name entered by the user of the DB. I can't remember the santax to use in the critera field.

View 1 Replies View Related

VBA Code To Require User To Enter A Value

Mar 14, 2012

I am trying to edit the following code to be able to require the user to enter a Loan number and keep prompting the user to enter a value as long as the field is blank. Once the field is filled in, then the code should go on to check if the sql condition is met and make the necessary change if met, then finally, I have a save command code that will require the user to save the record. Right now I am getting errors when I added the code to require the user to enter a field. I am new to loop and if statements in vba so I am not exactly sure how to structure it.

Code:
Private Sub Save_Record_Click()
Dim SQL As String
Do
If IsNull(Me![Loan Number]) Then MsgBox "Please Enter Loan Number. This is a required field."

[Code] ....

View 1 Replies View Related

Reports :: Allow User To Enter Dates On A Report

Feb 26, 2014

I would like my user to be able to enter dates on a report.

I have entered unbound fields on the report; but it doesn't keep any of the information (dates) for printing or otherwise. (I don't need to save these dates since they change monthly.)

View 1 Replies View Related

Forms :: Default In Textbox - User Should Only Enter Numbers

Nov 13, 2013

I have a text box in Form which i need user should only enter the numbers:

E.g.: When new form appears SI [space]#### should be there and even user needs he or she can change SI to PI and enter the required data.

And the data should go as SI #### or PI #### in Table Backend. The Textbox is Unbound.

View 2 Replies View Related

Forms :: Forcing User To Enter Data Into Certain Fields?

Nov 23, 2013

i have a form with various tabs and a number of fields. If I could I would just select all fields to "required=Yes" in the table design mode. But some fields should only have data entered if another field has a certain value. So, I think I just want all visible fields for this data requirement (I set some fields to visible=false if I don't want them to have a value).

So far I tried to do this on click of the Submit Record button which I created using the "docmd.gotorecord, , acnewrec" statement, but I can't seem to make it work when combining it with if then msgbox statements. Plus I typed an if then statement for every required field.

Here's my code below:

Private Sub AddNewRecord_Click()
On Error GoTo Err1
DoCmd.GoToRecord , , acNewRec
Me.Label216.Visible = False
Me.CM_2A.Visible = False

[code]....

View 14 Replies View Related

Tables :: User Form Design To Enter Necessary Information?

Dec 30, 2013

I have given an example in the attached excel spread sheet with a few comments at the head of each column.

1. I want to confirm that my best modelling approach for this kind of information is a series of 1 to many relationships linking the attributes in columns A->D?

2. In the example given an environmental rating is given to each make/model of car based on each combination of attributes A-->D. How would this work in terms of user form design to enter the necessary information? in order to assign an environmental rating?

View 4 Replies View Related

How To Create My Own Message If A User Enter A Value Not Match With The Data Type?

Jul 26, 2006

In MS Access form, how can I create my own message if the user enter a value that not match with the data type of a field in underlying table? Thanks a lot!

View 3 Replies View Related

Queries :: Create Query Where User Will Enter Information In Boxes?

Jun 26, 2014

I am trying to create a query where a user will enter information in boxes (any combination) on a form and a query will bring up the joined information from 4 different tables but I do not know where to start with the relationships on the query let alone the best method to search.

To start it off I have attached a db with the tables and the form I want the user to enter the search criteria into as well as my attempt at a query.

View 3 Replies View Related

Modules & VBA :: Clear Textbox After User Enter Invalid Date

Jan 7, 2015

I am trying to clear a textbox after the user enters an invalid date and I do not know why the following code is not working:

Private Sub txtStart_AfterUpdate()
If Not IsNull(Me.txtStart) Then
If Not IsDate(Me.txtStart) Then
MsgBox "You have not entered a valid date"
Me.txtStart = Null
Me.txtStart.SetFocus
End If
End If
End Sub

View 3 Replies View Related

Forms :: Allow User To Enter In Text Into Combobox So That It Saves To That Record?

Aug 5, 2014

How do I allow a user the ability to enter in text into a combo-box so that it saves to that record?

View 6 Replies View Related

Forms :: Forcing User To Enter Data Before Allowing Save

Dec 23, 2013

I have a form that a user fill out to populate fields in my database...how can I make it so that user MUST fill in certain fields before they are allowed to save data?

I need to stop users from taking shortcuts when entering data, and skipping a lot of fields. So i would like to be able to specify the minimum fields, and an error message must show when they try save incorrectly to alert them to this.

View 1 Replies View Related

Form Filter Combo - Msgbox When User Tries To Enter Data

Jun 1, 2012

I use filter Combo boxes in a lot of places so that users can filter records easily. (Not combo boxes for input).I have them labeled as filters but nonetheless users keep trying to input into them for some reason.How would I add a message box to it so that it states that 'this box is not for data entry etc'.

View 2 Replies View Related

Forms :: Restrict User To Enter Data If Dsum Exceeds Total

Sep 8, 2014

I need to be able to restrict users enter a value in the text box (on Form B) called "FTE Assigned" if Dsum of a field called "FTE Allocated" in another form A is less than what is going to be sum of FTE Assigned after the value is entered.

Both these forms are used by users to enter data in the 2 separate tables which are linked together through a join.

Master table - having FTE Allocated values and secondary table having FTE Assigned values.

Basically a message box would do if Dsum (of FTE used) is coming out higher than FTE allocated.

View 4 Replies View Related

Modules & VBA :: Get Msgbox To Let User Enter Data In Specific Text Boxes

Jun 17, 2014

i want to get a msgbox to let the user enter the data in specific text boxes so they can't let it empty if not empty then do..this is my code

If Me.Client_Name.Value = "" Then
MSG = MsgBox("You Should Enter The Client Name")
ElseIf Me.Username.Value = "" Then
MSG = MsgBox("You Should Enter The UserName")
ElseIf Me.Address.Value = "" Then
MSG = MsgBox("You Should Enter The Address")

[code]....

the msgboxes that tell the user this textbox is empty is not appearing what's wrong with my code

View 3 Replies View Related

Prompt User To Enter Personal Password When Ticking Option Button

Mar 24, 2015

I have a form in which I collect approvals from two different departments. To approve an item the user selects their name from a combobox, and then tick an option box to indicate approval. The combobox is from table 'Users' and has a query as a source with the following fields, 'UserNum, First, Last, Password'. The 'approval' fields are on table 'Approvals' and are yes/no fields.

What I'd like to have happen is that the user chooses their name from the combobox and then ticks the option box for approval; when ticked I would like a messagebox to appear asking for the users password based on the name chosen in the combobox.

Is this even possible?

View 6 Replies View Related

Form Event To Alert Before User Moves Onto Another Record

Sep 20, 2005

Hi,

I have a form with some bound fields and some unbound fields. If I make any change to the bound fields I can use the "Before update" event to perform some actions when a user tries to move onto a new record.

What I now need is if a user doesn't make any change to the bound fields but makes a change to an unbound field - how can I check this before the next record is displayed. Is there any event I can use? Each time a user tries to move to a new record I want to check first if they have added anything to an unbound field.

Users can move onto the next record using buttons or the record navigator at the end of the form.

Many Thanks,

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved