Has anyone experienced this problem? Ver: MS Access 2002 (10.6501.6735) SP3
On a Form; I change from Form view to Design view, when I try to change back to Form view it will not change. It stays in Design view.
I did Compact and Repair Database to no avail.
NOTE: nothing has changed in the database, the day before the 6th, I had no problem. NO update or patches have been applied to either the OS or the MS Access in the past 2 weeks.
I am modifying the Students template for a student & alumni administration database for our non-profit Food Service Training Academy.
After making some changes recently, whenever I select Design View on a specific form (Student Details), a window pops up stating "The command or action 'Requery' isn't available now. The window further states that:
You may be in a read-only database or an unconverted database from an earlier version of the databaseThe type of object the action applies to isn't currently selected or isn't in the active view.And finally "Use only those commands and macro actions that are currently available for this database."
After exiting this window, a Macro Single Step window opens with the following info:
This form is usually opened via an "Open" button in a list of students form called Student List. It has 5 tabs on it, the last I created & copied 2 queries to it. The form opens in Form view OK and I can switch to Layout view OK. Once in Design view I seem to be able to do go back and forth OK, although often going back into Design view sometimes only the name of the sub-form is displayed and the whole header, detail, grid, and controls etc. do not show.
Further, you can open the Student Details form directly, but now it opens as a datasheet instead of a form. Otherwise, the normal use of the forms, from a user perspective, does not seem to be affected.
This may have begun after I opened the database in Access 2007. I have done all the development in Access 2010.
I have a form with a subform in it. On the main form, I have a combo box with a list of program numbers to choose from. Once one is selected, the subform displays all the unpaid invoices under that program number. This part works fine. The problem occurs when I try to close the form, switch to design view, or scroll the subform to the right. Basically, the error message says that the record can't be saved because it would create a duplicate value in the index/primary key. However, this form is used to display information only. I have disabled the edit, delete and addition abilities, so I can't figure out why it thinks I am trying to change or add a new record. Any help would be appreciated.
I figured it might make things easier if I included a copy of the database, so here it is.
The form is called SETR, and the subform is AllInfo subform.
I don't know if anyone else has had this problem when changing from one year to the next, but I haven't found any postings regarding date compare issues. I have a two-fold problem:
1. I have a combo box that lists available dates from a table in Descending order so the most recent date is on top. This worked in the last half of 2006, but when the year changed it is now listing the 2007 dates at the bottom of the list. The field is a Short Date in mm/dd/yyyy format. How do I list them in descending order (01/02/2007, 01/01/2007, 12/31/2006, 12/30/2006...)?
2. The user can also type a date in this field to enter a new record that isn't in the table, but I have After_Update code that also compares the date entered with today's date and gives a message if they enter a future date. This also worked in 2006, but now it is populating the future date message if they enter a date in the past. Here is part of the code:
'*****************************************
Private Sub cmbDate_AfterUpdate()
Dim strDate As String Dim intResponse As Integer
strToday = Date
If IsNull(cmbDate) Or Len(cmbDate.Value) < 1 Then MsgBox "Please select or enter a valid date." cmbDate.SetFocus Exit Sub Else strDate = cmbDate.Value End If If strDate > strToday Then intResponse = MsgBox("You entered a future date. Do you want to continue with this date?", vbYesNo) If intResponse = vbNo Then cmbDate.Value = Date Exit Sub End If End If
After reading many of the posts here, I decided that one of the problems with the tables in the db I was working on was in the primary keys. I had used the same field name as the primary key in all of my tables. This was RecipID, which was a user entered textbox with an example in a label beside it showing the format to use.
After reading stuff here, I decided this wasn't a good idea. So I changed RecipId to be an autonumber in the parent table (Household_Info) and a long integer foreign key in the children. Also, I added some fields to the parent table to identify the head of household (lastname, firstname)
I already had a continuous form made with a subform and a pop-up form associated with it based on my previous tables. Reran the query underlying the form, and the new fields showed up in the field list box for the form. The fields are all still present in design view, but I get a totally blank form in form view. I checked the forms recordsource and made sure that it was set to the new query.
Can anyone give me an idea about what I'm overlooking? Do I have to recreate the form?
(Sorry if this is a repeat of a question someone has already addressed, but I couldn't turn up any relevant threads after several hours of searching.)
I have a Form which I have linked correctly to a subform. The Text boxes are showing in the Design view but are not when one switches to the Form View. Labels for Fields are visible in the Form View. Have even created a new subform and that will also not display the Text Boxes.
Why the ability to view the properties of an object within a form is not available when you double click on it in design view?
I was happily working away double clicking on a command button to edit some code when for some reason the next time I tried to edit it did not open up for me.
I was unable to access it even by right clicking on the object & selecting properties as that also appears to be disabled, not greyed out or anything but just does nothing when selected.
Have I inadvertently changed a setting somewhere that prevents the properties from being displayed?
I have seen that in some sample db's rightclicking the mouse showed the menu with an option to check or uncheck the dataview option, unchecked the formview was applied, but when i 'just' import the subform, i cannot find somewhere the possibility to change from dataview to formview.
Maybe someone can help me with this, probably very simple(?), question?
I have 4 tables and around 440 records but can only view up to 417 in the form I have designed. I have been adding new records via form and it has been added to my main table, but when i try to view it in form view - the record is not available to view. What do I need to do to correct this problem?
I have checked that there are no filters, data entry is set to No, Auto deletions, additions and edits are set to yes.
Also to mention it seems that the problem has arisen since I set up some new queries, there is a one to one relationship between the tables!
I have a form which is opened with a filter from another form. For some reason it views the form in form view, although it was set up as datasheet view. I even went to the form properties and the default was datasheet and i made it not to allow other views. This still didnt solve it. I want it to be in datasheet view because i want to show multiple records at the same time.
If u kno how i could resolve this please offer ur help
I have a table that I was in the process of cleaning up when I got the following errors: "type mismatch in expression" and "microsoft office access can't open the table in Datasheet view." What does this mean, and how can I get rid of these errors? Thanks.
Hi all - I am getting a runtime error when changing a form from form view to datasheet view. The reason it's happening is that I have code in the OnCurrent of the form which populates a text box with information calculated from subforms on the main form. Obviously, with the form in datasheet view, the subform is not there, hence the error.
Any ideas on how I can stop this error from happening?
I have a 2003 mdb which I have opened in 2010 from my C drive. If I hover my mouse over a table name it shows the original UNC path. How do I change this so I can view the data without an error message appearing?
Hi, I am in the process of creating a new database - I am a bit new to this. I have a main form, which also contains two subforms. The record source of the main part of the form is 11 tables, and then each of the subforms is based on one table each (so there are 13 tables altogether).
Everything seems to be linked up ok, and when I add new information to the form (and the subforms), the information gets saved to the tables as it should be. However, I want to be able to view past records in the form view, so that users can regularly update past records using form view. I can't do this. Each time I open the form view, the thing at the botton left says 'record one of one.' THen if I put the curser in (for eg) the box called 'client name' and click on the search button, I get a message saying:
"you can't find or replace now, the fields are not searchable due to: - the fields are controls; - the fields have no data; - there are no fields to search."
well I don't really know what that means. There is definately data in there somewhere, because I can view it in the table view, but I'd like to be able to view and update old records, and search, in the form view.
I have a main form (tsTimeSheetMain) which contains a sub form (tsTimeSheetDataNewSub) in data sheet view. When I click off one row onto another row in the sub form, it triggers this code:
Forms!tsTimeSheetMain!ProjectMonSum.Requery
i.e. it tries to requery the ProjectMonSum field (on the main form) which is a dsum calculated field. This works fine and updates the ProjectMonSum field (which dsums values from the same datasource as the subform.
However, this seems to put the cursor back to the top left field in the subform (datasheet view), rather than leave it in the field I click on (in the subform).
Why is this happening and what is a decent workaround this issue? I just want to update the calculated dsum field each time you update values in the subform.
how to hide the the 'Details' section in my form when viewing it in Split Form. I tried to use
Code:
Private Sub Form_Load() Me.Detail.Visible = False End Sub
but that just makes the Details section look blank, as oppose to not having it there at all.
have only the Form Header and Datasheet visible in the Form View of my form. Similar to the 'Contact List' form in the Contacts Template that comes with Access.
I have a table called NewTransactions_tbl that I have been using for some time. I am trying to add a new field called CustomerProjectNumber. It's not being displayed when I look at the table view. I've attached an image showing the settings for the field. I am probably missing something obvious.
I want to "zoom" to the underliyng data from pivot view. When in excel someone doubleclicks a field in a pivot table, it automatically creates a table containing all the lines that field were made up from. I want to achieve the same behaviour in Access.I started to think towards a VBA coda, that could be initiated from the form's double click event. It should go to datasheet view with the prpoer filter criterias.
Fields: RecordDate Department DepartmentNumber 7 text fields 6 memo
What I am looking to do is be able to click on a combo box for departments so that once a department is selected, the latest record for that department is populated in the form, however, it is opened as a NEW record so that when any changes are made to the information in the form to the text or memo fields, it is saved as a new record.
I'm having a lot of trouble with this. Thank you very much in advance for your help.
I have a main form and a large sub form that covers alot of the main form fields. My question is when I'm in design mode, the sub form blocks the fields I need to edit. I've tried setting the sub form "sent to rear" and the fields "sent to front", but this does not seem to solve the problem. So I end up dragging the sub form off to no-mans land and then place it back. Is there way to say hide the sub form in design view and then unhide it.
