I have a form in MS Access that allows the user to input the names for areas of study.
I want to have it so that the user can input 10 areas of stundy at one time, thus the table will be
populated 10 rows at a time.
I would then like to have a command button that will allow the user to input the next set of recrods.
Is this possible? Not a VBA programmer but can play around with the event procedure and some code if need be
I am new to Access and have the following problem. I have one table which displays Skills (memo field) a second table which displays a skill rating ( 5 choices) and a third table which list the jobs in the company. I need to compile a fourth table which lists the skills required for each job and the corresponding ratings. I would like to have a Form in which I select the job and all 560 skills are displayed in datasheet format and I can select the ones required and allocate a skill rating. The results should then be saved to the new Table.
Any ideas as to how to acheive this task.
Hello. I have a question that seems simple but I can't get it to work. Any help would be appresiated.
I need a form that will pull the oldest record from one table, allow the user to add a few fields to the record, then paste the record to a different table. when it is done the original record has to be removed from the original table.
I have tried using a append Query, but it moves all of the records at once and doesn't allow data entry on each record. I'm not sure if this would be done by a Query, Form or Macro. I have laid out the nessacary data flow below incase there is an easier way to do this.
Persons A,B, and C enters data into table 1.
later person D pulls the oldest record from table 1, reads the data then adds fields to the record and records it to table 2. The information is then removed from table 1. Person D then goes onto the next record from table 1. When person D is done, there will be no data left in table 1.
Any Ideas? or can someone point me in the right direction for help?
Hi all,
Really, I am very happy to be a member in this great forum with those great members....
I have a form with three text boxes and one button "Submit". This form is build based on a table with three columns. How can I insert records into this table through that form by clicking that button "Submit"....
Thank u and sorry 4 bothering u....
Hi all,
Really, I am very happy to be a member in this great forum with those great members....
I have a form with two text boxes and one button "Submit". And also, I have a table with two columns. How can I insert records into this table through that form by clicking that button "Submit"....
I think it is simple, but I am very beginner in Access....
See the attached file....
Thank u and sorry 4 bothering u....
I have a form "release_details" having fields date, version, cksum ,comments,labels, and is link to a table,
it has a button "mai"l ,on clicking this button a new form is open which has a button "send mail" on clicking this a mail is sent and pops a message "mail sent".I need when "send mail" is click it should also save the fields of form
"release_details" to the table.
cmdSend_Click()
Forms!Enter_Release_details.Dirty = False
I am trying to display a table records on the form with this code:
Private Sub Form_Load()
Dim rs As DAO.Recordset
Dim str As String
On Error GoTo Err_cmd_vimport_Click
'defining the form recordset
[Code] ...
Err_cmd_vimport_Click:
MsgBox "Error No: " & Err.Number & "; Description: " & Err.Description
Resume Exit_cmd_vimport_Click
End Sub
however i could not be able get any results in the form as if the debugging is not showing an error.
I was updating my records by filling a form and entering the data's into a table but all of a sudden i couldn't add data to form and table..
View 9 Replies View RelatedStill working on the registration and badge print system for their upcoming exhbition the company I do a bit of work for. Managed to solve most of my problems but have got stuck here.
Basically each of the badges have a barcode (code 39) on them which is in the following format...
*1000000123$M*
(*'s required for the barcode to work, the numbers are the badge number and the $M is the enter command (i think))
Basically we need a form that allows us to scan the barcode (the number of the barcode is the Primary Key in the tbl_Attendees), and for this to update the "Attended" (Yes/No) field to yes. This bit I can do with a simple update query, but we need some form of confirmation, something simple like a line of text showing up on the form saying
"Joe Bloggs of Leeds registered as Attended".
I have a form linked to a table and in my form there is a listbox reflecting the records in my table. Evereytime I tick a record in the list box the information on its corresponding columns appears on the text field.
So far I am able to add, modify and save record to my table using this form but I am having a problem on deleting a record which I selected on the listbox. I created a delete command button but it is not working. Please see attached database.
I have a form to enter new records in a table.But when user enter empty record i want to display a validation text to to fill the required.I tried this code.
If txtItems="" then
msgbox("please fill the required fields")
else
code to insert the records.
end if
with this code its accepting the blank record also.What is the correct code?
access 2013. I am working on a project which I should design a form as program.
in that form I want to make a field with expression builder to retrieve some data which satisfy a condition (that condition is based on some input form who work with the program) I want to access records one by one and check if they satisfy the condition but i do not known how can I do this?
I have a table with 3500 records with following fields : Id_number, Num , Name , Address,.
This table used for store customer data .
My job is print 10 record randomly by customer arrival . I made this by use num field and put number manually, example I put 1 ,2 , 3 .... Till 10 , so for print i made criteria , I put 1 and 10 . Problem is because more and more customer is coming , I got confuse to put number manually . are there any way to get it automatic ?
I am looking for a query that will return records from a table that have related records in another table. Opposite to the Unmatched Query Wizard.I have two tables: tblSupplier and tblSupplierProducts.The two tables are related by the field "SupplierId".I need the query to only return Suppliers that have Products.
View 3 Replies View RelatedWhen I add new records to the form and close the form, the tables are updated with the new records, but the new records don't show in the form (navigation).
View 14 Replies View RelatedI have a tabular form with many rows of records. Users add some additional information and now I would like to insert it into a new table.
I tried to use below code and it works but it inserts only first row out of many. So I just wonder how to amend it to insert all data?
Code:
CurrentDb.Execute "INSERT INTO [PO Lines - Table] ([SKU], [SKU Description], [Barcode], [Qty], [Unit Price], [PO Number], [Range])" & _
" VALUES ('" & Me.SKU & "','" & Me.SKU_Description & "',''" & Me.Barcode & "''," & Me.Qty & "," & Me.Unit_Price & ",'" & Me.PONumber & "','" & Me.Range & "')"
I have a form that has a few combo boxes that I use as drop down lists that the user can choose from. After the form is completed, the user clicks "Submit" and the query/table is updated. However, 2 records are added instead of 1. The first record leaves the first field blank and every other field completed. The second record has every field filled out with the same info as the first. In other words, the first of the 2 records is unnecessary. How do I eliminate this from happening?
Data Entry set to "Yes"
Submit button:
Code:
Private Sub cmdSubmit_Click()
DoCmd.RunSQL "Insert Into qryEarlyPoints(empName,dateOfOccurrence,leaveEarly,early6Mins) VALUES('" & Me.txtEmpNameInf & "','" & Me.txtDateInf & "','" & Me.cmbEarlyPoints & "','" & Me.cmbArriveEarly & "')"
Application.SetOption "Confirm Action Queries", 0
Application.SetOption "Confirm Document Deletions", 0
Application.SetOption "Confirm Record Changes", 0
DoCmd.Close
cmdSubmit_Click_Exit:
Exit Sub
End Sub
I have an unbound new contact data entry form that adds records to many different tables. I have no problems adding one record to a child table at a time, but one of the things we are collecting is a list of online networks a person belongs to, and I want to be able to stick a "check all that apply box" on my form and have it add multiple records to the child table. Here's the basic set up, I have a parent table with the main contact information with a primary key field "IID", a lookup table with "Facebook, LinkedIn, Twitter..." etc in it with a primary key field "online_id", and a bridge table to link the two which should have multiple entries for IID, one for each online_id. I want to use a listbox (or something like it) that the user can select multiple online networks and then have records added to the bridge table. I can figure out how to add the listbox on the form, what I can't figure out is how to get the values out of the listbox. T
View 13 Replies View RelatedI have a form that has the following fields: Ticket Date From, Ticket Date To, Pawnshop, Property Category, Item Description, Make, and Serial Number.
The purpose of this form is to allow an unexperienced user of Access to query a database. Thus far, when I specify the query to include dates from/to, pawnshop, property category (eg, jewelry), and item description (ring) the records retrieved are the correct number. None of these fields contain null values. However, the Make field has some null values and the Serial Number field has an extensive number of null values.
My problem is that I have noticed because the Make field has some null values a few number of records aren't retrieved after my query (even if I leave the Make field blank). This problem is much worse with the Serial Number field. For instance, I ran a basic query via my form specifying the dates and property category-jewelry and got back 229 records but when I verified this with a separate query I got 960 records, which is the correct number.
My criteria from my querry are as follows:
Between [Forms]![PawnProperty_PawnerQueryForm].[TicketDateFrom] And [Forms]![PawnProperty_PawnerQueryForm].[TicketDateTo]
[Forms]![PawnProperty_PawnerQueryForm].[PropertyCategory]
Like "*" & [Forms]![PawnProperty_PawnerQueryForm]![Pawnshop] & "*"
Like "*" & [Forms]![PawnProperty_PawnerQueryForm].[PropertyDescription] & "*"
Like "*" & [Forms]![PawnProperty_PawnerQueryForm].[Make] & "*"
Like "*" & [Forms]![PawnProperty_PawnerQueryForm].[SerialNumber] & "*"
The bottom two I've had to remove because the correct number of records were not being retrieved. I suspect that the null values in the Make and Serial Number fields are the root of the problem. to make these queries all work together!!
I have a FrmCadastro which updates my master table TblCadastro. Primary key of the TblCadastro is an auto numbered field named CADID.Fields CPF, NAME, FIN, NAT, TIP, MOT, and INSTREQ of the FrmCadastro are mandatory. My rule is that If any of these fields is null then the record cannot be saved (cannot be added into TblCadastro).
FrmCadastro has two distinct buttons, as follows: BtSave (to save either newly included record or changed record) and BtDelete (to delete a chosen record from my master table).To delete a record has not been a problem because under the click event of the BtDelete I use the following command lines to successfully eliminate an existing record (previously saved) from the TblCadastro:Dim numRecord As Integer
numRecord = Me.CADID
Dim SQL As String
DoCmd.SetWarnings False
SQL = "DELETE * FROM tblcadastro WHERE cadid = " & numRecord
DoCmd.RunSQL SQL
DoCmd.SetWarnings True
To save a complete record (properly filled in) has not been a problem either since the code takes care of that very well.When the user is in the process of adding a new record through the FrmCadastro two different user behaviors can take place:
1. Irregular entering - The user for some reason just give up saving the record (he decides to add the new record later, for instance) by selecting the option Save = No, or
2. Incomplete record - By mistake the user try to save an incomplete record (a record that shows any mandatory field as null).
I coded the following command lines under the click event of the BtSave to take care of deleting those records... BUT it does NOT work. The system reads each line of the code, find the record properly, close the form as expected, but the incomplete record STILL REMAINS in the TblCadastro. I do not understand why, since the code is pretty much the same of the one in the BtDelete.
Code:
Private Sub bt_save_Click()
If MsgBox("The record was changed. Do you want to save it?", vbQuestion + vbYesNo, Me.Caption) = vbYes Then
If MsgBox("WARNING! Incomplete record will be automatically deleted from database. If you did not fill in the fields CPF, NAME, FIN, NAT, TIP, MOT, and INSTREQ, the record will not be saved.", vbOKOnly, Me.Caption) Then
If Not IsNull(CPF) And Not IsNull(Name) And Not IsNull(FIN) And Not IsNull(NAT) And Not IsNull(TIP) And Not IsNull(MOT) And Not IsNull(INSTREQ) Then
[code]...
What should I code to exclude both the incomplete record and irregular entering thru the button Save (options Yes and No) ?
I Work for an NHS organization. A department here orders prescriptions and sends them out to Gp Surgeries. I have been tasked in designing a database to make this easier for them.
Prescriptions arrive on a Pallet. Each pallet has 100 Boxes of prescriptions on it. Each box Contains 2000 Individual prescriptions. I have a table which contains the following:
Box Number
Serial Start Number
Serial End Number
When the user enters the first box number and the serial start number, i need it to calculate the serial end number and insert another 99 rows into the table and also calculate the serial start and end numbers for these other 99 records.
I have a database created in Access 2003 about six years ago. I’m the sole user of the Application, which I use to keep track of my personal assignments and to quickly access other resources. A search form was added and tweaked over time until it contained the features I desired. The search form uses a subform to display a list of records, with the ability to click a record‘s "Edit" field to open and update that record.
In about March 2014 we upgraded from Office 2003 using Windows XP to Office 2010 using Windows 7. All users on other Applications that I’d designed and support experienced missing Reference issues, but those were resolved rather quickly. I'd been off work intermittently for about six weeks between April and July and gradually started noticing other issues with my personal assignments tracker that I did not immediately associate with the upgrade. Early on, I noticed that I could no longer delete or rename database objects on several of the databases that I'd designed and support. Eventually, I also noticed that I was unable to create new records and received SaveRecord error messages associated with the subform. I'd encountered SaveRecord issues before and went through previous steps to resolve, but to no avail. Eventually, I came to the conclusion, right or wrong, that all of my recent issues were associated with the upgrade.
I found through online research that my loss of ability to delete or rename Objects was possibly due to the loss of Object Owership and Permissions, which was associated with my Security Workgroup. I confirmed that Ownerships and Permissions had been lost and was unwilling to recreate the database, just yet. No user of other Applications that I support reported any problem creating new records.
I know now that new Access doesn’t have the Security menu item that allows Workgroup creation and joining. After months of online research and trial and error, I was directed to Microsoft Knowledgebase Article 918583, which provided VBA code that allowed me to Run the Workgroup Administrator to rejoin my previously established Workgroup.
After rejoining my Workgroup, everything seemed to return to normal. I could delete and rename records and was able to create new records. After a few days, I noticed that new records were not being displayed in the search form right away. I confirmed that the records were being added to the main table, but still not available in the search form, queries, or reports until after an additional record had been added. In other words, for example, in order to view record 1, a record 2 would have to be added. In order to view record 2, a record 3 would have to be added, and so on. This makes it very tedious to enter new assignments.
I believe the present issue is greater than my search form, because the newest record is not only not available in the search form, but not available in any other form, query, or report. I have no clue where to start.
I have a split form (frmPatient Schedules) that shows me my records in the datasheet view at the bottom section of the form. My records have a field with a checkbox (ckbxHOLD).how can I get the records that don't have their checkbox checked to be copied as new records to a different table (tblHome Visits)?
View 9 Replies View RelatedI have an append query that appends records to a table, and I have a form based on that table.
Users will click a button that will run the append query and then open a form for users to fill in remaining empty cells. How can I filter the form to show only the newly appended records?
I've attached screenshots of the table relationships and some nested forms that I need to discuss in my database.
If you look at the forms screenshot you'll see I have a main form "business/cmc issues" that uses a combo box to select a business name; nested into that I have a second form "policy issues log" that holds details of policy issues about that business; then inside that I have a sub form "issue updates" that records brief details about the actions carried out in trying to resolve each policy issue.
The same policy issue can affect more than one business (because of a relationship between the two companies etc) but still needs to be viewed separately. So for example in the business selector combo box I might have business "ABC". In the policy issue it might say "doesn't pay on time". The "doesn't pay on time" issue might also apply to business "123" and so if I picked that business from the combo box you'd see the same policy issue.
Because it's the same issue for two separate businesses, the actions carried out will be the same, so what I want to do is, after a new action is carried out (where relevant) to be able to click a button that would run some code that copies the actions entered in the sub form for business ABC and pastes them into the sub form for business 123 where the product area and policy issue are equal. This is to avoid having to enter the same data twice.
I have an existing Main form that has a sub form that the user uses to enter multiple records into a table....it works fine EXCEPT that I need to make it even easier and more intuitive and add a lot of labels. Basically the user selects items from a drop down list that adds items to a Work Order. I need to add some labels to the form to make it more descriptive for the user.
So, what I want to add multiple records using a single main form.
Is is possible to?:
1. simply turn the subform into a single main form? Can this be done by using a Command button or something similar?
2. copy all of the controls etc from the sub form into a new main form and have it all work nicely?