Hello all
Got a question that I've never seen done in Access....
I have a DB I'm creating that creates pickup runs....(guy goes out and collects stuff) I'll need to get a subform showing the run items and be able to move them up or down according to the way in which the driver is going to do the run
Any ideas guys?
I've got no idea where to even start
I need to move my database from one computer to another and will need to put it on disk first. I have user serurity on the DB. Should it be ok as long as I put both files (the Db and the security) onto the disk and transfer them both?
Just asking as I cannot copy to CD from my computer and will have to put a request in so dont want to have to keep going back.
hiya all! i need some help!
i want to make a button on my "Calls" database form, to move all "Finished" calls (calls that have been declared as completed), into a "Finished Calls" table.
I have half of it working - i have a button that DELETES all 'Finished' calls. However i now need them to COPY into my "Finished Calls" table... is it an Append Query i need?
the code i have now is as follows...
SELECT * INTO Table2
FROM Table1
WHERE Finished='Yes';
thanks in advance!
johnny
is there a way by which i can move one or more records from one form to another when clicked on the 'YES/NO' button ??? :confused:
thanks in advance.
I'm planning make a move from Access to SQL Server.
To be honest I never used it before, but I told to my bosses that I'm a Gooroo in it.:)
So can you guys give me an idea if it is really hard to make a move, to upload the existing databases and to get used to it.
How long it takes?
What books would you recommend?
Or what forum?
Hi all
Currently i have this setup
Listbox1
Rowsource: SELECT PREC FROM PNum;
I have created a Listbox2
What id like to do is move the selected items from Listbox1 one to Listbox2
Is there any simple way to do this? I'v looked around and found some examples, but they seemed too complicated for a newbie like me.
Thanks in advance!
I have a form that has two fields. now when i click a button i wnat to bring those two values to another form, so less typing for the user. Now i did this before with the close event with a populate function?
I have two forms one: CFR second: New
CFR Fields: cfr_ehpid, cfr_ offsett
i want to bring those two feild values to the from new in feild5 and field 6
so when the user clicks the button it will open the form new and take the values from cfr and place them in feild5 and field 6??
Heres my code:
Private Sub Command359_Click()
Dim strblank As String
Dim strdesc As String
CFR_EHPID.SetFocus
strblank = CFR_EHPID.text
CFR_PATOFFSET.SetFocus
strdesc = CFR_PATOFFSET.text
strdesc = strdesc
Form_History.Text5 = Me.CFR_EHPID
Form_History.Text169 = Me.CFR_PATOFFSET
DoCmd.OpenForm "History"
Exit Sub
End Sub
I know what I want to do...but have no idea how to get started! I'm new to coding and using macros and quesries doesn't seem to help.
When field [TermDate] is updated with a value, I want to move the record from table [BadgeData] to table [Termed]. I'm sure this is easy for someone who'll be willing to throw out a few suggestions.
Also, is there anywhere in the code builder that will help identify what code (or commands) do? (Does that make sense?)
hiya, im new to this sql scene..!
i have an MS Access db containing a few tables of 'calls recorded' and 'finished calls'.
(i want to move all 'Finished calls' to a seperate 'Finished Calls' table)
anyway, the thing i want to do is to move records from Table1 to Table2, i am able to do this using the following code...
SELECT * INTO Table2
FROM Table1
WHERE Finished='Yes';
this code does work, however it does not delete the records that were moved out of Table1 - they are still there, its more or less copying and pasting them..
any help would be much appreciated!
ok ive read some responses to people having trouble or need to know how to move a record from one table to another...
i have two tables. One with member and another with thier siblings.
i have two forms. one with the member details which contain a command box to open the other form for their siblings. the siblings form is a tabular form so when i double clikc the siblings form i can all the children but when i open it from a specific member only their children are shown.
each member has a memberID (primary key). but the siblings have the same ID as their father(member)
i have put a commmand box in the siblings form next to every sibling. what i want is that when i click this button the record moves to the members column.
i only know the very basics of VB...so a step by step explination would be helpful...
this is very specific and if more information is required please ask here or ask for my msn address.
Thank you in advance
Hi,
I know how to move the tables from mdb to SQL Server.
But, how can I move all the queries from mdb file to SQL Server?
Hi
I am trying to write simple code that undoes entering a new record and moves the focus to a mandatory field. I wrote the code below; however, I get this run time error message each time I run it.
DB can't move the focus to the control PlotNum.
My code:
Private Sub cmbHouseType_BeforeUpdate(Cancel As Integer)
Forms![frmHouse]![qryHouse2]![PlotNum].SetFocus
If Forms![frmHouse]![qryHouse2]![PlotNum].Text = "" Then
Cancel = True
Me.Undo
MsgBox "Please enter the Plot Number first, then enter the House Type"
End If
End Sub
Any help will be very much appreciated
B
I created a crosstab query that I'm using to dynamically create a form. I know how to create a total in a crosstab query but it creates it before it creates the columns. I need the total column to show at the end of the columns. Does anyone know how to do this?
View 5 Replies View RelatedOK, I have a truck mileage database with a columns for monthly "StartingMiles" and "EndingMiles" - At the beginning of each month I want to automatically move the entire content of the "EndingMiles" column to the "StartingMiles" so I can start a new reporting month. I'm assuming I can use an Update Query to do this - correct? How do I setup the Update query to perform this?
Or is there a better way?
I have a pop up form that appears (with a beep) when a condition occurs. I would like that form to appear on top of all other window applications.
Access is an active application but the pop up form is hidden if other applications are in use.
Is there a way to have the pop up window appear on top?
Any help would be appreciated.
I have a switchboard using 4 different label that open a specific form when clicked. I have been trying to add a very simple code on the "on mouse move" event of each label that change the state of the 4 labels I am using:
Private Sub Form_Current()
Me.Option1.FontBold = True
Me.Option2.FontBold = False
Me.Option3.FontBold = False
Me.Option4.FontBold = False
Me.Arrow1.Visible = True
Me.Arrow2.Visible = False
Me.Arrow3.Visible = False
Me.Arrow4.Visible = False
End Sub
The code is working fine but all the label keeps flashing when I move the mouse over the labels which is a bit annoying. I don't see How I could get the "flashing" to stop. Would it be possible to cancel the "on move mouse event" once the code has been run once?
hi
i apologize if this question has been answered before. i have looked at numerous others in the 'listbox' search box, but not had any success in adapting the answers to what i need.
i have a form A with a listbox of 1,400 rows
i then select maybe the 10th row down on the listbox, and
a new form B opens with information pertaining to the listbox row selected
form A changes its visible value from true to false
i do my editing on form B
now what i would like to do is, on form B click a next button and for
form B to close
form A to be visible again, and the next row (11th) on the list box be highlighted
form B to open again but with pertaining to the next listbox row (11th) selected
form A to not be visible
any help would be very much appreciated
Here's a tough one that has been driving me crazy! (Probably easy, but I don't want to admit it!)
I have a form with a listbox called "lst_exclist". The recordsource for this listbox is the following query:
SELECT tbl_collexcludereasons.priority, tbl_collexcludereasons.excname, IIf(tbl_collexcludereasons.enabled=-1,'Enabled','Disabled') AS enabled, tbl_collexcludereasons.priority FROM tbl_collexcludereasons ORDER BY IIf(tbl_collexcludereasons.enabled=-1,'Enabled','Disabled') DESC , tbl_collexcludereasons.priority;
Which basically gives me this with dummy data:
2 PIPELINE ENABLED
3 HELLO ENABLED
5 GOODBYE ENABLED
1 BAD DISABLED
4 GOOD DISABLED
6 LAST DISABLED
I had two command buttons, one up arrow and one down arrow. The up arrow is supposed to move the selected record on the listbox up by exchanging the next lesser priority number with itself. The down arrow does the same. The DISABLED records are supposed to be ignored on the move up and move down procedures, meaning only ENABLED records are allowed to exchange priority numbers, and thus move up or down on the list. I tried the following code:
Me!lst_exclisthidden = Me!lst_exclist
DoCmd.SetWarnings False
Dim startingnumber As Integer
Dim endingnumber As Integer
Dim nametochange As String
Dim getchangerst As DAO.Recordset
If IsNull(Me!lst_exclist.Column(0)) = True Then
MsgBox "Please choose an entry on the above list to move.", vbCritical, "Error"
Exit Sub
Else
End If
If Me!lst_exclist.Column(2) = "Disabled" Then
MsgBox "There is no need to move a disabled selection, please enable the selection to change it's priority.", vbCritical, "Error"
Exit Sub
Else
End If
startingnumber = Me!lst_exclist.Column(0)
nametochange = Me!lst_exclist.Column(1)
endingnumber = startingnumber + 1
If Me!lst_exclisthidden = acLast Then
MsgBox "You cannot move the bottom selection on the list down, please choose another one.", vbCritical, "Error"
Exit Sub
Else
End If
While DCount("*", "tbl_collexcludereasons", "Priority = " & endingnumber & " and Enabled = -1") = 0
endingnumber = endingnumber + 1
Wend
DoCmd.RunSQL "Update tbl_collexcludereasons set tbl_collexcludereasons.priority = tbl_collexcludereasons.priority - 1 " & _
"Where tbl_collexcludereasons.priority <= " & endingnumber & " and tbl_collexcludereasons.priority > " & startingnumber
DoCmd.RunSQL "Update tbl_collexcludereasons set tbl_collexcludereasons.priority = " & endingnumber & " " & _
"Where tbl_collexcludereasons.excname = '" & nametochange & "'"
Me.Refresh
Me!lst_exclist = endingnumber
Me!lst_exclisthidden = Null
DoCmd.SetWarnings True
But it seems to loop when it gets the the area it is checking for numbers because the highest records is disabled, so it's ignored. How can I make this work? Please help!
Thanks
Vassago
I have a form which has a checkbox which allows a case to be marked for review. What I want is that if the case is marked for review, I want to be able to able to view these calls and change a priority and order of these cases. I will always have 10 priority spaces and I want to be able to move them up and down priority accordingly. I should be able to report on this.
Thanks
I do not want the cursor to move to the next control on a form when the user presses the enter key. It is a memo field and I want the cursor to move to the next line as it would in a word document.
Any ideas,
Recall
I have two particlular listboxes in an Access Form the first is named listEmp and the second is listAllocated
The source of the first is a query which is based on previous combo boxes.
How can I move selected or all items from one box to another and back if needed.
I need the items moved to be removed from the original box so the data is only in one or the other box.
Please include any VBA that may be needed.
I have a listbox named list0. How to move item up/down in listbox by using command button.
View 9 Replies View RelatedHi, I have data from a form on my website in a text file, that corresponds to each visitor's input, each 13 lines in the form belongs to one visitor, as shown (twice) at the end of this message.
What I would like to do is have each visitors inputs translated to ONE row, with 13 columns/fields each. It could be appended to the same table or preferably generated in a new one. Note, there are no blank fields, some won't have data after their title, i.e. addy_line_2: is often blank, but at the very least, addy_line_2: or another field name is always there.
It would ROCK if I could also automatically take the name of each field out, i.e. each name is continuous characters up to the : (colon) ...
Thanks in advance, my Access knowledge is obviously limited, I'm sure this is fairly simple!
The fields:
Phone: 213-555-1212
Submit: Continue
addy_line_1: 1000 Melrose Place
addy_line_2:
badge:
city: Los Angeles
email:
homegroup:
name:
program:
state: CA
volunteer:
zip:
Phone:
Submit: Continue
addy_line_1:
addy_line_2:
badge:
city:
email:
homegroup:
name:
program:
state:
volunteer:
zip:
thank you thank you thank you thank you thank you !!
Hi,
I was wondering if i can get some help here. The aim here is moving data from excel to Access '03.
At the moment, i'm having troubled in finding out a way to open a database and execute SQL - insert the data into the table.
Set cn = New ADODB.Connection
With cn
.Provider = "Microsoft.Jet.OLEDB.4.0"
.ConnectionString = "Data Source= C:MydocumentsmyDB.mdb;Extended Properties=Excel 8.0;"
.Open
End With
then, i got stuck in here whereby i need to execute the SQL insert command to insert record to the table.
Appreciates your help greatly
Thank you in advance
Say i have two tables
1 = computers (it holds info about the computers)
2 = Repair (this table holds only the PCs that are under repair)
I want to be able to move one computer record to Repairs table as soon as i select that "this pc is under repair" on a form. So it does not show up on my report of computers in hand and shows up on computers in repair.
and when i get the pc back from repair, i want to be able to select "back in stock" and it'll move the record back to Computers tables & removes tht record from repairs table
is there a way i can do this automatically (without manually move a record)?
Any suggestions - web links or examples will be much appreciated.
Thank you
I've got a database that pulls from a table. One of the options on the table is pending or complete. Right now, there are over 1000 records because they are all stored in the same record. I'd like to move the completed items to a different table.
Can this be done? If so, what steps do I need to take to do this?
Thanks!