I have a tabbook on a bound form, and an unbound combobox just before the tabbook. Whenever I tab or enter out of the combobox the form goes to the next record. Is this supposed to happen? If so, how do I stop it.
I have a form which has 3 subforms based on a table with a combo box. When I select value from the combo box the data on the subform changes accordingly using the 'Requery'. However, they also show the record from the 1st value of the combo box. Is there a way I can get this solved?
I have a sub form on a tabbed control. In the subform I have some calculated controls and I make them recalc when ever data in other fields change bu entering a recalc cmd in the update event of the required fields. That is all fine but the problem is that the forms focus moves to the first record and I need it to stay on the active record.
I have tried requery, recalc and refresh methods and they all do the same thing.
All I need to do is up date the calculated controls each time a field is updated and stay on the same form but it's eluding me.
I have a form with some bound fields and some unbound fields. If I make any change to the bound fields I can use the "Before update" event to perform some actions when a user tries to move onto a new record.
What I now need is if a user doesn't make any change to the bound fields but makes a change to an unbound field - how can I check this before the next record is displayed. Is there any event I can use? Each time a user tries to move to a new record I want to check first if they have added anything to an unbound field.
Users can move onto the next record using buttons or the record navigator at the end of the form.
My form has been set up to enter and display info.However, the table it goes into is not populating until the user has finished his/her session and closes the form down. We need this info to update earlier, preferably on entry, as we require certain elements to be able to populate other forms.
The MainForm displays all information and the School or Team name is entered through this form, going into the School or Ministry table.This generates an autonumber which is then used in the TeamMember table to identify team members within each team. the only way we have access to this autonumber is by shutting the mainform down and then reopening it. Which event in the property sheet do I require to get the table to populate when the user moves onto next record?
I have a form with three subforms (Request, Employee Availability, and Employee Assign) in the image below. The user enters the ID in the Assign form (#4) which relates to the request at the top. When the user moves to the next record I want the value of the "Assigned" field at the top to be updated to "yes" for the record with the same ID as enter below.
In the end the following item with disappear when you return to the record: ID #4, Employee ID 109187, and Request ID 2 from the below form. My problem is I not sure how to get the Request form to update after the user moves to the next record.
When I add a record in the subform and then move to the next record whilst still in the subform, the main form jumps back to its first record? I then have to move back to the right record in the main form to update the next record in the subform.
I want to move to the next record in the subform without affecting the main form.
I have a subform with records of call details (date, time, subject) - the date and time are autogenerated and subject is a text field. After entering text in the subject field and then clicking on the close button in the main form, or clicking anywhere else in the main form, the record is saved to the table. However, if I enter text in the subject field and then move up to view previous records (within the subform) and then click the close button in the main form the record is not saved in the table. How can I either save the record before allowing the user to move to another record within the subform or before exiting the subform set the focus to the new record so that it will be saved on exit?
I need SQL Statements to use in VBS code for microsoft access that will move the current record being displyed on the form (lets say the table name is called 'old') to another table called 'new'. Also the record that is being moved to the new table needs to be deleted from the 'old table'. All of this needs to be done with the click of the mouse on the 'old' form.
This database will show the asset, where it is, what it is and who its with . It will display this on a form.
When this asset gets given to someone else i want a button on the form which displays the assets current data to be clicked and for that info to be moved from the asset current table into the asset history table.
Can anyone tell me how do i move to the previous record in the database using asp. i have tried the following Code:rs.moveprevrs.moveprevious hint's will also help
Here is the code I have to Update a table tblExternalIncomeSchedule
It works fine and updates the table for the first record.
How do I move to the next record StartYear 6 thru EndYear 10 and write that data to the same table without overwriting the data from the first record?
It should add 5 more records to the table
Yr 6 2000 Yr 7 2000 (since inflation = 0) Yr 8 2000 (since inflation = 0) Yr 9 2000 (since inflation = 0) Yr 10 2000 (since inflation = 0)
Code: Function FillExternalIncomeSchedule(nClientID As Long, nProposalId As Integer, nProposalYears As Integer, nRetireAge As Integer) Dim rst As Recordset Dim qdf As QueryDef Set qdf = CurrentDb.CreateQueryDef("", "DELETE * FROM [tblExternalIncomeSchedule] WHERE [ProposalID] = " & nProposalId) qdf.Execute
Ok i'm opening a form with the intention of grabbing the last reference number and adding one then moving to a new record.
However the form opens on the first record. Here is my code.
Private Sub Form_Open(Cancel As Integer) Dim lastbookref As String Dim expans As String Dim Newbookref As Integer Form_frmbooking.RecordSource = "SELECT tblbooking.Bookingno, tblbooking.Clientno, tblbooking.Sampledate, tblbooking.Sampleref, tblbooking.[Sample place], tblbooking.Recieveddate, tblbooking.Recievedby FROM tblbooking WHERE (((tblbooking.Bookingno) Like """ & Left(Form_frmClient.Clientname, 3) & "*""));"
If Form_frmbooking.Recordset.BOF = True Then Form_frmbooking.Bookingno = Left(Form_frmClient.Clientname, 3) & "/00/0001" Else Form_frmbooking.Recordset.MoveLast lastbookref = Form_frmbooking.Bookingno DoCmd.GoToRecord , , acNewRec
Newbookref = Val(Right(lastbookref, 4)) + 1 Select Case Newbookref Case Is < 10 expans = "000" & Newbookref Case Is < 100 expans = "00" & Newbookref Case Is < 1000 expans = "0" & Newbookref End Select Form_frmbooking.Bookingno = Left(Form_frmClient.Clientname, 3) & "/00/" & expans End If End Sub
Anyone have any idea why this is not moving the new record.
Even more bizarrely the new booking reference is inserted into the new record....its just that the form opens up on the first record.
I need to be able to move 2 fields from the previous record to the next record. Does anyone know how to do this?
What I am doing is the following:
I have a table with 3 fields. I am using a form to enter the information. Two of the fields on the form will be information from the previous record. How can I bring that information forward to automatically be on the form and in the table?
Hi, found this forum looking for an answer to this question. Hope someone can help.
I'm trying to build a database that tracks electronic components. Mostly the database tracks location movements, but also repair issues and other possible changes. I'm thinking the best way is a database that has a record for each move, and any other changes are included in each record.
My question is, is there a way I can easily have the current information be propogated over to a new record, where it could then be modified? Example: I'm looking at a record of an item that was just returned to me. I would like to click a button on the form which would create a new record, then move all currently displayed information into that record.
I am writing a database with a number of tables with forms attached to each table. I have placed navigation buttons on each form to move to first, last, next, previous. I have set up the code associated with the buttons as "public sub" so it is available for each form to use.
This was working OK except that when I used the NEXT button at the last record it would open a new blank record & keep opening a new blank record on each click.
To over overcome this I put in an If statement to check if it had moved to a new record. To do this I used the following:
If Me!NewRecord Then ..... etc
Now I get an error "Invalid use of Me key word" I suspect it is because I am using ME in a public sub
How do I overcome the problem of moving passed the last record and still have the coding available to all forms?
The Code is below.
Thanks for any help.
Public Sub Next_Record_Click() On Error GoTo Err_Next_Record_Click
DoCmd.GoToRecord , , acNext
If Me!NewRecord Then ' If new record move back to previous DoCmd.GoToRecord , , acNext ' Send message MsgBox "This is the last record", , "No More Records"
I have a subform where the user enters the number of training days on a quotation. After the record is updated I do a requery on a text boxt on the main form that shows the total number of training days ordered for that particular customer.
The problem is the focus then resorts to somewhere else on the main form but I want it to return to the same record on the subform. I have managed to get it to go to the first record in the subform but obvisouly from users perception that is not god enough.
I have got the following code in the sub form's after update event but nothing seems to work although I do not get any errors.
Private Sub Form_AfterUpdate() If Me.TrgType = 1 Then
Dim rs As DAO.Recordset Dim varBookmark As Variant Set rs = Me.RecordsetClone rs.FindFirst ("QuoteItemID = " & Me.QuoteItemID) varBookmark = rs.Bookmark Forms!frmCustomer!txtUnitsOrdered.Requery Forms!frmCustomer.Refresh Me.Bookmark = varBookmark Me.QuotedPrice.SetFocus rs.Close Set rs = Nothing
I have a current employee's table and Retired/Resigned table, when an employee either retires, resigns or gets fired, i want to be able by the click of a switch or check box of some sort to move that record to the retired table. Your input is greatly apprectiated....
Hi, With a table in open view can a record be moved to a different position, i'm using access 2003. Also is there any way to sort besides ascending or descending? I've got a lot of tables to make and if I forget a single column/field and have to add it later (like I have done all ready numerious times) I'm almost having to recreate the table again in order to have the field fit in the correct spot in the table. These tables are bound to combo boxes so its important every thing is grouped for easy choosing.
The form will be used by poor experienced users so to avoid problems i would like whenever we move to a new record(or changing the contents of a stored one) a save record message to appear refering to the one we are just leaving. Generally i would like a solution which will restrict users from entering data by mistake using scroll mouse or ctr+page down. If i could design it ,i would choose that nothing in the form is saved until a save all button is clicked.This means that the user will enter virtually as much data as he likes but they will be stored in the table only when the button is clicked,but i don't know if this is possible since my form is bound to table. Thank you all in advance, black ailouros
When moving from a subform back to the mainform and requerying one of the mainform controls, the record selector of the subform moves back to its first record. ...
GoToRecord (,,Next) '(in the subform-this is correct) SelectObject Object Type Form Object Name pv '(go back to the main form) In Database Window No GoToControl (SubTot)
Requery (SubTot)If I remove the Requery, the record selector remains where it is supposed to be. The SubTot data source does include the aggregate dsum value of the subform's underlying table. What is strange is that this has been running properly for many years until it was upgraded from .mdb to .accdb format. Is there an easy way to make the record selector stay put?
I am trying to get a record from tbl_new_accounts to tbl_closed_accounts, based on the number entered in a input box.
Code: Dim StoreNumber As String StoreNumber = InputBox("Please Enter The Store Number", "") CurrentDb.Execute ("INSERT INTO Tbl_Closed_Accounts SELECT Tbl_New_Accounts.* From Tbl_New_Accounts WHERE (((Tbl_New_Accounts.Fld_Store_Number)=" & StoreNumber & "));")