i have a form with a 4 page tab function on it.
i have inserted 4 hyperlinks on 'page 4 of the tab', however these hyperlinks are displaying on 'every page of the tab'
is there a way to set the hyperlinks to only display on page 4.
thanks
Hi -
I have a form that is multi-page. On the third page of that form, I tried to set up a tab control that allows me to natvigate among three subforms. The problem is that the moment I click a tab (which is on the third page of the multi-page form), the form automatically jumps back to the first page.
Is it possible I can fix it so that when I use the tab control on the third page on a multi-page form, I will not get bounced back to the first page? Although this sounds simple, I cannot figure it out.
Thanks
tm
Send only one or two pages of a multi-page report. I have a report that has three pages. I only want to send the first two as a pdf file. Can this be done with VBA? I know it can be done using Exporting Data on the External Data ribbon, but how can I do it via VBA?
View 4 Replies View RelatedI have a Form named Clients with a multi-page tab named TabCtl0.
The record source tables - primary key is [ID] , TabCtl0 has 7 tabs, the 1st named General.
The 1st 6 tabs show information from the same record.
The 7th tab contains a subform named Focus displaying continuous forms with 3 fields in each record including [ID].
What I am trying (for hours and hours without success) to do is to create a Macro that fires when I double click on a control within subform Focus that takes me to the page named General and selects the record where ID = the ID within the selected record of subform focus.
I have a form with a tab control and an option group (frame). When I built the layout of the contents of the first tab, the frame responded properly to click events. Now that I have copied them onto the tab control, the events seem to disappear.
(When I check the events for the controls, they are all still there, and selected by the Properties table).
I know it's probably one of the "doesn't use Access very much, does he" type of situations, so how to get these controls working again!
Here is the Form Code listing.
Option Compare Database
Option Explicit
Sub SetSourceDescription()
If Me.frRunMode.Value = 0 Then
Me.lblSourceType.Caption = "Source for this run will be the Extract .pst file(s)"
[Code]...
I have a filtered form with a sub form displaying only non-printed invoices.
The sub-form has a check-box (which is how the form is filtered) to only show unchecked (not yet printed) invoices.
All i want to do is print only the invoices visible in the sub-form.
I've setup the report to link to a query and the report is all setup, i just can't get the query to function how i want it to!
I've got this SQL code for the Query.
Code:
SELECT tblOrderForm.OrderNo, *
FROM tblOrderForm INNER JOIN tblOrderDetail ON tblOrderForm.OrderNo = tblOrderDetail.OrderNo
WHERE (((tblOrderForm.OrderNo)=[Forms]![Export Orders]![ExportSub].[form].[OrderNo]));
However this only shows the field with focus. I would like it to display ALL data in the subform.
I am struggling with building and If Then statement in my Report Footer. I have a report that pulls data from two tables...Students and Homeroom. This gives me a list of the students in each homeroom class and they are separated by homeroom. I would like to use a function in the page footer that counts the number of students who are members of our PTSA organization and then returns a percentage based on the total number of students in each homeroom class.
In the Report, I have on each page:
Page Header: Homeroom, LastName, FirstName, FamilyID
Details: LastName, FirstName, FamilyID
What I need is for the function to look at the FamilyID field and determine is there is any value entered. Then I need a count the total number of records in that homeroom and the total number of records with a value, so I can then get a percent of how many students actually belong to the PTSA in each homeroom.
I’m having problems trying to construct a database for my company. They need the database to enter information about certain insurance policies that our company has. We have a table setup and ready to go. I need to allow multiple users to add records to the database so I want to setup a Data Access Page to accomplish this. However, there’s a problem I’m still stuck on.
In the Data Access Page, I need the ability to search and display a record designated by the primary key field (policy number). I found code to do this, however when I click the button, input a known policy number at the prompt, and click ok, it displays Error: 3265 the item cannot be found in the collection corresponding to the requested name or ordinal. Here’s the code from http://office.microsoft.com/en-us/assistance/HA010345491033.aspx
<!-- I took this out as i did not know what to do with it, it could be causing the problem
<SCRIPT LANGUAGE=vbscript FOR=MSODSC EVENT=Current(oEventInfo)>
-->
<SCRIPT language=vbscript event=onclick for=Command0>
<!--
' Clone the recordset.
Dim rs
Set rs = MSODSC.DataPages(0).Recordset.Clone
On error resume next
' This line assumes that the value you are filtering on is an integer.
' If the search value is a string, use slightly different syntax.
' For example, "CustomerID = '" & CStr(InputBox("Please enter customer to find", "Find")) & "'"
' rs.find "ProductID=" & cLng(inputbox("Enter a ProductID","Find"))
rs.find "CustomerID = '" & CStr(InputBox("Please enter customer to find", "Find")) & "'"
' Custom error handling.
If (err.number <> 0) Then
Msgbox "Error: " & err.number & " " & err.description,,"Invalid Search"
Exit Sub
End If
' Check search results for success.
If (rs.bof) or (rs.eof) Then
Msgbox "No Product found",,"Search Done"
Exit Sub
End If
MSODSC.DataPages(0).Recordset.Bookmark = rs.Bookmark
-->
I have one-page forms which print a second page, blank except for a block of grey shading at the top. I have tried moving the content of the form up but that doesn't eliminate the second page. If I look at print preview, every second page of the entire database shows up as blank, regardless of where that happens to appear in the record.
View 2 Replies View Relatedto automatically create a second, third, fourth... page depending on how many characters are in the narrative. The only other thing needed to be changed is the page# of Page#.
So right now my form looks like below
CAD#
Person name
Charge
Narrative
"
"
"
"
"
"
"
"
"
"
"
"
"
Officer name date page # of #
Thanks in advance.
Matt
Hi All
I have added the Allen Browne Calendar 2k control to my form.
My form consists of 4 pages. On pages 2 and 3 I have subforms and on page 4 I have Personal data. Page 1 is general data and the Calendar is on Page 1.
What is happening is that the Calendar is also being displayed on my 4th page, in the same position as page 1. When I try to move it, cover it or delete it from page 4, it is also gone from page 1.
Any suggestions please?
Many thanks
Tee :(
I have a form with six tabbed pages on it. Since data entry follows in a logical order I would like to put a command button on the bottom of each page (subform) that can be used to go to the next page. What I am going to though? If i put a command button (open form) then it opens the whole form not as a subform on a tabbed page. if I try and put a command button (open page) then it will not let me enter the page number. Hope that makes sense! Any ideas
View 3 Replies View RelatedI have spent the last couple of days trying to figure out how to make this work.
I have three tables.
tblIntakeMain
[IntakeMainID]
tblIncidentDetails
[IncidentdeatailsID]
tblPersonnel
[PersonnelID]
On the main form I use subforms to link tblIncidentDetails and tblPersonnel to tblIntakeMain. Both subforms can, and do, have many entries. This all works fine. What is not working is the search form I am using.
I am using Gromits most excellent Search Form. The problem is when I create a query, qSearch, to bring together the three tables I get a multiple records which makes the searches very confusing and near useless. Is there anyway around this? Is there something I am missing? Is there another search method I could use that would work in a similar way as Gromits? Please help before the Prozac runs out and I lose my mind--what little it left.
Hi everyone. Apologies if this has come up before, but the search terms I've tried here and on google keep turning up the wrong information.
At work I manage a large database with many tables. It stores data for participants in a research study. Each table stores the data for a different test, so one participant may have multiple records. Primary keys for these tables are defined by a combination of the participant and date of test fields. (Everything is dependent upon a table that stores the static info for participants, so the database is normalized.)
I want to be able to make a table that lists target participants and dates, and then create a query that looks at this table and pulls all the available data from various tables for those individuals that was recorded within one year of the target dates.
I've successfully made queries that meet these criteria while pulling data from only one table. The problem I'm having is that when I try to pull from multiple tables, each with it's own date field that needs to be used as a criterion, I end up excluding almost all the data, because most of the target participants do not have all the requested data within the target dates.
I've tried being inclusive with my criteria (using ORs), but then I end up with tons of data that I don't want and I need to filter through it, which defeats the purpose of the query.
Any advice on handling this issue, or do I basically just need to create a separate query for each table?
I'm sorry if this is too vague, but it's illegal for me to upload any of my own dataset. I could probably come up with an example if it's helpful, though.
Thanks!
I have a report which includes several subreports. There will be times when a subreport prints partially on one page and completes on the next. I don't always want to break to a new page with this subreport. However, I would want to break to a new page if the subreport cannot fully print on the current page.
View 3 Replies View RelatedI have a report that lists states and cities within the states. When a state name happens to be at the end of the page the individual cities appear on the next page with no State heading. I solved the second page problem by setting the "repeatSection = Yes" in the Section Header (though I haven't shown that in the example below).
But the previous page (which just shows the State Name and no cities looks dumb. Is there some sort of solution.??
(Actually I would also like any State that continues to a next page to not just have the state name but something like
" Colorado (Continued)" Is there anything I can do in VB to make a page break if the section is going to print but therer isn't enough room for one detail line?
This is what I currently see
Alaska
Ancorage
Prudo Bay
California
Whittier
Anaheim
Colorado
------------------------Page Break ---------------------------------
Denver
Pueblo
Colorado Springs
Deleware
Dover
-------------------------------------------------------------------------------------------
Thanks !
If I have a report and it has controls (labels representing column titles) in the page header. Now when I print the report - if it happens that the last page has no detail records - but there is text boxes and so forth in the report footer. Is there a way to not display the page header on the last page?
I have a report where the last page shows the page header - and the field/column labels on the page header - but for which there is no detail records left to display - on the last page. There is report footer information that should display. It just looks weird because the field/column labels show at the top of the page - but there is no data remaining to print under them on that last page.
Hi All,
I have a data access page needs a filter by a dropdownlist, the dropdownlist used is a html control and I use javascript to filter the data programmaticlly in the onchanged event of the control.
MSODSC.DataPages(0).Recordset.Filter="AppID = 3";
My problem is, when this statement runs, the page refreshes. But I don't need the page refreshes, it set the dropdownlist text to the default text, not the value user select. The browser is IE7.
How can I stop the page refresh itself?
Thanks and Happy New Year!!
I have a report that should only show 1 page yet I have 2 and one is blank . I cannot find out why?
View 3 Replies View RelatedI am trying to create an invoice report. I want to add all the costs from the detail section in my footer. I have accomplished this in either the Report footer and/or the page footer, but the problem is that the report footer doesn't go to the bottom of the page, and the page footer doesn't go to just the last page. I have tested a bunch of suggestions that don't seem to work.
1. Print page footer with Report header = NO - only works if your report is two pages or more.
2. Private Sub PageFooterSection_Format(Cancel As Integer, FormatCount As Integer)
If Page = Pages Then
Me.[TextBoxName].Visible = True
Else
Me.[TextBoxName].Visible = False
End If
End Sub
The Page functions worked, but it did not change the results from page to page. If it was a two page report, then the if statement is false and the text box was not visible on page 1, but it also was not visible on page 2.
I've used the following code on the footer on print procedure:
Private Sub PageFooterSection_Print(Cancel As Integer, PrintCount As Integer)
Me.PageFooterSection.Visible = (Me.[Page] = 1)
End Sub
This works fine when you view it in print preview, but the footer don't show up at all when you actually print it.The reports default view itself is set print preview.
I have made a report on my query. The page setup is all around merging 0.2" and page size A4
When i view this report in preview it looks all my data whatever i want in a page but after every page it will generate a blank page.
I have included my report.
Hi all,
I have a form with three tabs.
Problem is that when user opens the form - it navigates to the first tab BUT navigates so far down that user cannot see the tab headings.
Although all tabs first item is as close to top as possible.
BTW - last two tabs are based on subforms.
Cheers
How can I get a form to have multiple colums.
View 2 Replies View RelatedI would like to create a form that my users can select multiple check boxes from and have only those records that meet the criteria come up in a search.
See attachment for a look at the form.
I need to be able to let the user have the ability to put in a name and then select any of the check boxes and then click on a search button that will execute a query that will bring up the results.
Any help with code or at least a point in the right direction would be nice.
Thanks,
Chuck
Hi, I'm currently creating a performance review database for my team and I'm having a few issues.
I was wondering if there is any way other than making a multi table query to have multiple tables linked to a form. The reason for this is because the performance review has 5 sections and I made a table for each section and would like data entered into the form to be entered into those tables.
What I first tried was making a multi table query with all the fields from all 5 tables. Then when I am done updating the values in the form to that 1 table with all the fields I run an append query to populate the data into all the other tables. The issue with this way is it's a manual task and with autonumber on my tables I have to delete all the values from the other tables and then run the append else I have duplicates from when the data was entered last time. Any tips or help would be greatly appreciated.