i have a "library-database" with a query that allows you to search books by author/title/category/...
in the title-field i have the following criteria:
Like "*" & [enter keyword] & "*"
eg. i have two books "Roman and Greek literature" and "Roman literature"
if i type "Roman literature" in the prompt box it'll only give the second book because the criteria doesnt split up the keywordstring.
Is it possible to get both books as result of the query with only one promptbox?
I would like to make an Access database for my collection of scientific papers. From that database I should be able to find articles using descriptive keywords. The problem is I haven’t figured out how I could search for the articles needed using multiple keywords at the same time (eg. papers that fill the criteria: <keyword a> AND <keyword b> AND <keyword c>).
What kind of tables and queries I have to create to do that?
I managed to create a form that is able to search keywords on Access 2007. However, the keyword search must be exact to what is contained in the table.
For example, I stored "red blue yellow" into the database, and I can only search "red blue yellow", "red blue" or "blue yellow" in order to call that data.
How do I make it such that I am able to search "blue red yellow", "yellow blue red" or "red yellow blue"?
These are my current codes:
Code: Private Sub txtSearch_AfterUpdate() Dim strWhere As String Dim strWord As String Dim varKeywords As Variant Dim i As Integer Dim IngLen As Long
Hey guys it's been a long time since i've been here but i again need your help
my job asked me if it's possible to have keywords highlighted in search results in report am i clear? meaning, when you search for keywords in one of the fields, and then your results come out in the report, can they be selected, like in Word, or in searches on the Internet, like when doing a search on Monster, all your keywords will come out in red, that way you can easily read the results
I have a database with hundreds of records in a main table called tblPARTS which has three fields - Part Number, Part Description and Category. I have another table, tblKEYWORDS, with two fields; a field called KEYWORDS which has words like "cable", "bracket", and "relay". The table has a second field called CATEGORY. The CATEGORY field has either the word ELECTRICAL or MECHANICAL associated with each of the KEYWORDS. So, for example, "bracket" would have "MECHANICAL" as its associated category. There are dozens of these entries in the KEYWORD table.
The problem: I need to auto fill the parts table (tblPARTS) with the correct category by looking at the DESCRIPTION field in the PARTS table which is made of several words, e.g. "STAINLESS STEEL BRACKET - 3" X 2" ". I need to find the word BRACKET and fill in the CATEGORY field in the parts table automatically via a query. There are several hundred parts in the main table.
I can do this easily using a standard update query, but it is limited to 10 IFF statements and there will be many more than this. Can I do this in VBA and if so, where do I start? I am an intermediate user of ACCESS.
Currently, I am trying to search a memo field on a table by having the user enter keywords on a form (up to 10 keywords can be entered). It works when just one keyword is entered, however it doesn't work if more than one is entered. How do I account for more than one keyword being entered to search the memo field and return the recors where any of the terms show up in that field. Each one of the keywords [KW1] ...etc are in a separate unbound box.
Current formula looks as follows: Like "*" & [Forms]![KeywordInputForm]![KW1] & "*" OR "*" & [Forms]![KeywordInputForm]![KW2] & "*" OR "*" & [Forms]![KeywordInputForm]![KW3] & "*" OR "*" & [Forms]![KeywordInputForm]![KW4] & "*" OR "*" & [Forms]![KeywordInputForm]![KW5] & "*" OR "*" & [Forms]![KeywordInputForm]![KW6] & "*" OR "*" & [Forms]![KeywordInputForm]![KW7] & "*" OR "*" & [Forms]![KeywordInputForm]![KW8] & "*" OR "*" & "*" & [Forms]![KeywordInputForm]![KW9] & "*" OR "*" & [Forms]![KeywordInputForm]![KW10] & "*"
I'm looking for some type of custom function that will search a specified column for any keywords listed inside another table.
I can run a query on each keyword individually, however there are 50 and it takes a long time each time I do it. I was hoping to write in a function for that column and it would just select all records that match.
These would all need to be a "like" with an " * " on each end of the word.
With SQL it would look something like:
Code: select a.address1 from main_tbl as a where a.address1 like '* north *' or a.address1 like '* park *' or a.address1 like '* south *';
I just want it to read each of the table values instead of hard coding them and the column name would be the function name so it can be used in any column I specify. I'm just not sure how to incorporate this into a custom function.
Hi! Is it possible to make such query which will find all records that have name like keywords. These words are collected as s dictionary in another table in column name. Is it possible to make just one query or vb script that will search through all records using all of keywords given in dictonary? example dictionary: abaccus dolphin...... ..... query find records wich name is like abaccus or dolphin or........
Thank You in Advance for any advice cause i have big problem how to figure out.....I have to do this in my job......
I currently use forms for adding new pupils, and updating pupil subjects/arrangements/levels.
I also have forms to search for specific pupils, and to create lists for faculty heads showing which pupils are taking subjects within their faculty and the arrangements we expect to provide.
I use the forms to run queries, which can then output to reports for printing.
Where I am currently having an issue is the faculty field in the tbl-SubjectLevelArrangements. (If I didn't have to report to faculty heads I would just leave it out, but management will insist.)
Currently I have a form with dropdowns for adding subject, faculty, level and arrangement manually. This is acceptable for the subject, level and arrangement because they are completely interchangeable and dynamic throughout the academic year as pupils may drop down a level, or change the type of arrangement they require.
However as faculties are inextricably linked to subjects, I want to remove the possibility of human error. i.e. when a user (me) chooses either geography, history, or RE, then the faculty will always be Humanities, likewise if the user chooses French, German, or Spanish, then the faculty can only be Modern Languages etc.
I'm convinced there must be a very simple way to ensure that the faculty field prefills based on the limited keywords available in the subject field, but I just cannot figure it out.
I am using Access 2010 and Excel 2010. I need to have VB script to export the access table 502 records by 38 fields into Multiple Excel workbooks each having multiple tabs. In the Access table each record has two fields: Div and Tab that will be used to name each workbook and each tab (sheet). There are 6 unique "Div"'s to name the 6 workbooks and there are several "Tab" names for each Div (workbook).
Note: These 6 workbooks with multiple tabs were originally imported into Access from one common folder on my desktop by this routine:
Option Compare Database Option Explicit Private Sub Command1_Click() Dim blnHasFieldNames As Boolean, blnEXCEL As Boolean, blnReadOnly As Boolean Dim lngCount As Long
I am using Access 2010 and Excel 2010. I need to have VB script to export the access table 502 records by 38 fields into Multiple Excel workbooks each having multiple tabs. In the Access table each record has two fields: Div and Tab that will be used to name each workbook and each tab (sheet). There are 6 unique "Div"'s to name the 6 workbooks and there are several "Tab" names for each Div (workbook).
Excel workbooks would take names from the "Div" field and the tab names would come from the "Tab" field in the Access table. First need to find workbook name (Div - Field) then the look for each sheet name (Tab - Field) to create 1st Excel workbook with all the sheets (Tab) and repeat the process. I think you need to approach of read the Access table one record at a time keying on the "Div" and "Tab" fields in creating each Excel workbook with the associated multiple tabs (sheets) that are written to a common folder.
Note: These 6 workbooks with multiple tabs were originally imported into Access from one common folder on my desktop by this routine.
Option Compare Database Option Explicit Private Sub Command1_Click() Dim blnHasFieldNames As Boolean, blnEXCEL As Boolean, blnReadOnly As Boolean Dim lngCount As Long Dim objExcel As Object, objWorkbook As Object Dim colWorksheets As Collection
I want to create a form that allows users to update multiple fields for multiple assets. Below is what I came up with:
Ideally, I'd like the subform to be filled in by having the user select multiple Assets from the S/N combobox field which would then auto-populate the "Type" field. Then they would fill out the appropriate fields they want edited in the top part of the form. They hit save and magic happens. This would also be nice because only assets they want edited would be displayed (easier on the eyes) and no distinguishing would be necessary. To do it this way, I know I would need to use a temp table but I wanna avoid using temp tables.
I know I can do this by adding a Yes/No field in the "Asset" table, setting the "Asset" table as the subform's recordsource, and then putting a checkbox in the subform and allowing them to check the assets that they want to edit (which would also allow me to sort it instantly so that checked Assets are at the top of the datasheet for easy viewing), but I would like to know if there's a way of accomplishing this without the use of checkboxes.
I know I could also use a listbox and that allows them to multi-select items, but I'm not sure if that allows me to group all selected items at the top of the listbox for easy viewing of selected items. Plus it would involve a lot of scrolling (there are over 2k assets).
I have a form with 15 unbound text boxes (daily temperatures) and what I am trying to do after entering the temperatures into the text boxes the user clicks an add button which will add 15 new records into the temperature table
I made a database that in one of the forms, I like by clicking on a button the user be able to select 5 excel files with different file names (in the same directory) and then based on the imported file's names, it be stored in 5 different tables.
At the moment by using the bellow code, I can import multiple files (with the same formats) only into one table . My vba code comes as follow:
Function GetAllFiles() Dim fd As Object Dim strFilter As String Dim lngItems As Long
Const msoFileDialogOpen As Long = 3 Const msoFileDialogViewDetails As Long = 2
I need to count records based on multiple criteria from two different tables. I have two tables (i.e. "tblTasks" and "tblTaskHistory"). The tables have a one-to-many relationship based on the "TaskID" field. "tblTasks" has a field called "AssignedTo" and "tblTaskHistory" has a field called "TaskStatus". I need to know how many tasks have been "reopened", the "reopened" status is located in the "TaskStatus" field in "tblTaskHistory". I need this count against a unique listing of employees which can be found in the "AssignedTo" field in "tblTasks".
I would like to know which way is the best way to import excel data from multiple sheets in to multiple tables in access.
For example data from Sheet1 -> Table1, Sheet2->Table2, Sheet3->Table3 etc...
I have tried using this: Cmd.TransferSpreadsheet acImport, acSpreadsheetTypeExcel5, "Table1", "C:Importedfile.xlsx", True, "Sheet1!"
Ironically, data from Sheet2 and Sheet3 seem to be properly imported in to table2 and table3, but some of the data from Sheet1 seems to be missing in Table1 after import.
I am trying to build a newer database 2010, based on an older one,2000, that has been locked tight and I cannot see the modules to kinda get a reference of where to start. I am trying to find a VBA code that will allow me to import a several text files to one table. The text files are all in the same format but I cannot remove the page headers and footers to get the table to look right. I have attached an example of the text file i am trying to import but it is a stripped down version for information protection.
Also, it appears in the old Database Table once imported as:
J.Smith 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date J.Smith 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date J.Smith 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date J.Adam 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date J.Adam 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date J.Adam 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date
If I could import the text files and end up with a table like this, it would be all i need as i could run all the queries i need from this.
I HAVE A DATASETS cSV TEXT FORMAT WHICH HAS A SELECTION OF FIELDS THAT NEED TO BE IMPORTED INTO A TABLE. USING THE ADVANCED IMPORT FACILLITY I HAVE BEEN UNABLE TO IMPORT THE DATA PLEASE HELP AS THIS IS FOR MY A-LEVEL STUDENTS.
THE FIELDS REQUIRED IN THE SESSION TABLE ARE, Booking ID, Customer ID, Date Booking Made, Pickup Point, Payment Made
A small issue I was wondering of for a few day . Is it possible in SQL query to SELECT multiple fields from multiple tables ? Example for the question is
Code:
dim my_var as String my_var = "SELECT Emp_FName , Emp_LName , Emp_Adress " _ & " FROM Table1 " _ & " AND Emp_Date_Of_Payment , Emp_Sum_Of_Payment " _ & "FROM Table2 " _ & " WHERE Emp_ID = 3 "
Is this code actually valid in SQL gramatics , and is it usable if passed to a Recordset variable ( rs = CurrentDB.OpenRecordset(my_var) ) ? Just FYI - The two tables are not related and I want to keep them that way (If possible relate their records just via SQL/Vba )
I have 10 tables, 30+ fields on each table (every table has the same 'account number' field). I only need from 5 - 20 fields from each table. How do I get the certain fields from each table and put them in a table, query or report?
I have 3 tables made up of ID and NAME and other parameters. NAME is unique field in each table, whilst ID is not unique. the three tables share the same fields, but can't be combined due to the NAME field not being unique throughout.
Now I have a single table that has a unique ID so I want to make a 1-inf relationship between this table and all three. the problem is how do I look at all three tables at the same time instead of having to insert subdatasheet on only one table.
All retailers have at least one distributor BUT a retailer may or may not have ordered any products.
I have created my form but the query linked to the form is having some trouble. It is only selecting those records that have ordered products. For example, if I query a retailer name only and it does not have any ordered products, it will not display. Is there a problem with the table joins? The SQL for the query is displayed here:
I created the below query to come up with a new form. When I enter a single parameter, it works fine. When I modify the code and enter multiple patameters, it also works fine if I do not enter any information for the parameters. But once I enter one of the parameters information, then it does not come up with anything. I double checked and made sure it was typed in correctly. Is there a trick when entering multiple parameters on a query?
SELECT [JE 06 Log].[Operational Region Name], [JE 06 Log].[Period Name], [JE 06 Log].[Source System], [JE 06 Log].[Source Name], [JE 06 Log].[Category Name], [JE 06 Log].[Associated Category Name], [JE 06 Log].[JE Name], [JE 06 Log].[JE Base #], [JE 06 Log].Area, [JE 06 Log].[Line Description], [JE 06 Log].[Natural Account], [JE 06 Log].Description, [JE 06 Log].[JE Entry Date], [JE 06 Log].[Debit Amount], [JE 06 Log].[Credit Amount], [JE 06 Log].Amount FROM [JE 06 Log] WHERE ((([JE 06 Log].[Period Name])=[Enter Period]) AND (([JE 06 Log].[Source Name])=[Enter Path]) AND (([JE 06 Log].[JE Base #])=[Enter Base Number]) AND (([JE 06 Log].[Natural Account])=[Enter Natural Accnt])) OR ((([Enter Period]) Is Null) AND (([Enter Path]) Is Null) AND (([Enter Base Number]) Is Null) AND (([Enter Natural Accnt]) Is Null));
Does anyone out there know how I might do the following:
I have a main folder which contains many sub-folders. In turen, each subfolder contains several files. I am interested in creating a text file that within each sub-folder will list certain files in that sub-folder. Example:
Read Main Folder Do While Sub-folders exist Do while selected sub-folder contains files If selected sub-folder contians FileZ then Write selected sub-folder name to text file Write time/date stamp to text file else loop to next ub-folder end if end do while end do while Close input and output
Here is the situation that I'm hoping that someone can help me with. I'm working with a database that tracks our condo units - from prospect coming into the system until we close them as a buyer. All the units are setup in the system so a salesperson will select from the units available. All that works fine when I create reports. The problem is trying to get the parking and storage on the same reports with the unit information. The problem is that there are multiple parking/storage units "attached" to a single unit and I cannot figure out how to get them to all appear on a single row of the report. As an example -
I have units A, B, C Parking units p1,p2,p3,p4,p5,p6 Storage units s1,s2,s3.
Unit A uses parking units p1, p2, p5 and storage unit s2.
Unit B uses parking unit p3 and storage unit s1.
Unit C uses parking unit p4, p6 and storage unit s3.
How do I write a query/report that would show:
Unit Parking Storage Unit A p1, p2, p5 s2 Unit B p3 s1 Unit C p4,p6 s3
