how could i get multiple values shown in 1 form only? i currently have a code to look through 6 fields and if the fields iar blank, you get a a message box. you press ok and the next message is shown for the next field if it is blank but it would be so much better to have 1 message box showing all blank fields required to be filled in.
all it does is check the fields as these are required before continuing. if anyof the fields are blank, then it tells you and you cannot continue untl they are all filled. it seems easy in my head!!
im sure this can be done but im not quite sure how.
I am making a database and I am currently doing my forms. I have been using wizards and so far everything I have wanted to be able to do has been achievable, except for where I am now! I am making a 'purchases' form. What I want to be able to do is make multiple purchases in the one form. Let me try and give you an example to further explain myself.
Lets say Mr John Smith wants to purchase 1 black pen, 1 30cm ruler, 2 rubbers and a compass.
I want it so that rather than have to add each one of the purchases one by one, I want to be able to add them all in the same time and be able to go back to my purchases table and see:
Mr John Smith - 1 black pen Mr John Smith - 1 30cm Ruler Mr John Smith - 3 rubbers etc
Hi there. What I'm attempting to do is pass multiple values from a multiple selection list box as criteria for an Append Query. Is there any way to do this? The DB keeps track of Real Estate boards and the forms that they use, I would like to be able to select all the boards in a given state/province, but have the ability to deselect some within that province if I don't need them in the query (this is the criteria i'm trying to pass). I don't need to use a list box, any control that would allow me to pass multiple values would be great. Anyone able to help? Thanks very much.
I have a database and on the main table one of the columns is "Status". The values in that column can be either "Worked, Unworked, or Overdue".
I would like to be able to create a form so that the user can run a query and select which Status' they want to see. For example maybe they only want to see Unworked and Overdue so they can select those and run the query.
I am fairly new to Access and have no formal training on this program, just a lot of trial and error. I have a database with 4 tables. They are tblEmployees, tblCourses, tblDates, and tblTraining. The key for each was an autonumber that is EMPLOYEEID, COURSEID, DATEID, and TRAININGID.
tblEmployee lists pertinent information regarding an employee (name, serial #, shift, etc). tblCourse lists all courses that are available for an employee (course name, #hours, required attendees, type of training, etc).
tblDates lists all available class dates and times for the courses in tblCourses and has a lookup field for COURSEID and COURSETITLE from tblCourses.
tblTraining lists all the training scheduled for and completed by an employee and has a lookup/relationship with tblEmployees for EMPLOYEEID and EMPLOYEENAME.
It also has a lookup/relationship field with tblCourses for COURSEID and COURSETITLE. Finally, it has a lookup/relationship with tblDates with lookup field/relationship with DATEID and CLASSDATE. I have successfully created a form where the training can be added to an employee (frmTrainingUpdated) and it has a subform (frmTraining) with all classes for that employee in a multilist at the bottom (from a query of tblTraining). The subform also has a field for whether the training was completed and then the hours are credited to the employee (txtCredit).
The problem comes when I try to add all of the credited hours for a single employee in a separate field. I am trying to create a field somewhere on the form that will total all of the hours for all of the completed classes for the one employee on the form. I have tried to list the data for the textbox as =DSUM([txtCredit], tblTraining, WHERE (EMPLOYEE=Me.Employee)) and only get an error message displayed in the textbox. I tried to do a totals SUM on the query and it only gives me the individual hours for each class on the same line for that record.
I am trying to use a list-control on a form to let the user select multiple values. I have understood that this requires some VBA-code to step through the selections in the list, since the "multivalue-selection" is set to "Extended".
When I try to execute the code I have (found and have tried to adjust), then I get the error message "Object required". The "ListCount"-paramater always only results in a ZERO-value, when i step through the code:
Function cmdOpenQuery_Click() On Error GoTo Err_cmdOpenQuery_Click Dim MyDB As DAO.Database Dim qdef As DAO.QueryDef Dim i As Integer Dim strSQL As String
I am trying to improve a work process using an existing Access DB.We have a form with multiple texts boxes on it. I need to search through these boxes to determine the total number of occurrences of a specific value. This is not tied to a table.
The text boxes I'd be searching through all have related names: "Element0" to "Element40". And I'd most likely be looking for a "/" within the value in the boxes (value could be 12345/01, for example).Would then be using the result in VBA to apply some conditions, so I would prefer if I could do the count in VBA (the count/sum is the part that is hanging me up.)
I've found multiple ways to accomplish this from a table, but nothing for what I have to work with.I am unclear in my description of what I am trying to do, let me know and I will try to provide more information.
I have a subformClientOffers on my frmAllProperties. On the subformClientOffers is a field called Outside Agents. This field allows for multiple values to be selected.
The subfrmClientOffers is in datasheet view.
While the field Outside Agents DOES allow me to select more than one, they post in the field one after another:
Ken Shaw, John Doe, Jane Doe, Harlan Bestlyn
Therefore, the datasheet view of the subformClientOffers causes the field Outside Agents to get very long, much too long to view without scrolling. My client wishes for everything on the frmAllProperties to be viewable without scrolling.
Is there anyway, to cause the field Outside Agents to place a return between each selected name (sort of a wrap text kind of thing)?
One thing I might mention is that the field is a drop down field from tblOutsideAgents. The table itself has First Name and Last Name, but I concatenated that into Fullname on the form, so that when the user opens the drop down they see the entire name. I don't know if that would have any effect on making the 'return' thing work or not.
I can't use this field as a subdatasheet because I already have one subdatasheet attached to the subform to show multiple notes on each Client Offer.
I have a database in Microsoft access 2010. The database has a table that stores prospective customer records, and a form that is used to input a search criteria(s) via textboxes, which then queries prospective customers table and returns the records that contain the inputted search criteria(s).
An Example of Textboxes values on the search criteria form: Textbox - name: bob Textbox - address: Left blank Textbox - category: car,boat,truck
I Have tried creating a query with the following
field: name criteria: like “*” & name & “*” field: address criteria: like “*” & address & “*” field: category criteria: like “*” & category & “*”
SQL code: SELECT customerName ,address,category FROM prospectiveCustomers WHERE customerName LIKE “*” & name & “*” AND address LIKE “*” & address& “*” AND category LIKE “*” & category& “*”;
That works, but only for one value in a textbox. Once there is more than one value in a textbox (e.g name: bob,smith), the query returns no records.
I have also tried splitting the values using the comma as a delimmter, then inserting the values into a new table. That is fine until one of the search criteria textboxes has been left blank. So the query I created will run, but returns no records.
SQL CODE: SELECT prospectiveCustomers.name, prospectiveCustomers.address,prospectiveCustomers. category FROM prospectiveCustomers, [SearchCriteria-name], [SearchCriteria-address],[SearchCriteria-category] WHERE prospectiveCustomers.name Like [SearchCriteria-name].name AND prospectiveCustomers.address LIKE [SearchCriteria-address].address AND prospectiveCustomers.category LIKE [SearchCriteria-address].category;
Currently we track areas of non-conformance for a fleet of flight simulators. Each flight simulator has a particular ID number. In some instance an area of non-conformance is associated with a single simulator, at other times it is a fleet wide issue and applies to all or some simulators. In order to track as well as advise leadership and the contractor responsible for maintenance of the simulators of the situation we generate individual response letters.
In order to track each instance of non-conformance my idea was to create a new record for each deficiency. In the event that it is applicable to multiple simulators I would like to fill out the form with all pertinent data and then place a checkbox associated with each simulator and when the record is saved, it creates one record for each simulator with a checkbox ticked.
Once the deficiency on each simulator is fixed, I would check a box for a field called rescinded, which would remove that particular deficiency on that particular simulator from the active list of deficiencies but the others would still remain because they are associated with unique records.
I need to enter workload counts for 10 people, and it is done on a monthly basis. So I have a table of Months (Jan-Dec), a table of names, and a joined table with the months, names and a field for the workload counts.
I would like to make a form where I could select the month and all the names show up so I could go and enter the counts for everyone at the same time. I've attached a diagram to show what it would look like
i'm creating a search form giving the end user a range of controls to use when filtering/searching data. See the image.But, i think my range search (using the textbox) to put in a lower and upper limit...is preventing this from working. In fact, when i put data into all the controls, no data pops up in my subform.
My query data source can also be seen...showing you how i've handled teh null entries. (i need to put in a null 'handler' for the two textboxes?)
I'm trying to set the control source for a control on my report that describes the number of portions that goes into a box. Sometimes there is a specific number of portions per box and sometimes it's a range. When the number of units is specific, then it is entered into the MasterCaseMinUnits Field. If there is a range of units possible than the min is entered into MasterCaseMinUnits and the max is entered into the MasterCaseMaxUnits.
I want my report to look at the mastercasemaxunits, if it is blank it will only display what is in the MasterCaseMinUnits field. If there is a value in the masterCasemaxUnits field, then it will display the masterCaseMinUnits & " - " & MasterCaseMaxUnits. this is the code I'm Using:
I am currently developing a database to provide a friend with an auction tracking and ordering system.
I will have a number of questions the first is related to the Home Page/Dashboard/Summary form I am creating. I basically have a few sections, one of which is a combo box offering the user to select an auction to view in the summary section. This summary section contains the list of lots but I also hope to to expand on this and create multiple text boxes, each containing the answer to a number of queries (totals etc).
I have written all the queries and can see the results however as the form does not have a record source I would like to know how to make each text box populate with the result of different queries (ideally in vb - I am using ms access 2010)?
I have tried a few things, control source doesn't apply as I have no record source (i guess). I investigated Dlookup/Dcount but am unsure if these apply for the same reason. I understand I am likely to need a recordset etc in vb and have already tried a few things but unfortunately none of them work.
Normal Pay: Sum(IIf([PAYCODE]="STD" Or [PAYCODE]="PAY_R" Or [PAYCODE]="RATE*",[AMT],0)) .
as an expression and need my query just to pick up one row with a total sum of these values, however I am still receiving 2 or 3 lines of seperate values.
I have a Customer table with the normal customer info, name phone.Each customer has one or several parts. so I have a parts table.I have a service table and form.The service form contains the service number along with customer number.Each service has a service detail subform for service to the customers part.The problem I'm having and It seems to me to be an easy answer but it has escaped me totally. When I go to the Service detail form I want to pick the specific customers part.I cannot just select from the particular customer, but have to pick from a list of parts from every customer. I just want to see the parts from a certain customer that I have selected from the service order form.
I have a list of Vehicles in which each have their own maintanance schedules. Most of the maintanance for the Vehicles overlap. Instead of entering the same information over and over I'm assigning each type of vehicle a code number (example '05 Cargo is a 1, '04 Cargo is a 2). Now what I want to do is assign each maintanance the vehicle code, for instance I have 13 different types of vehicles that all need oil changes, so I want to assign the Oil change maintanance 13 codes. Is there a way to assign that maintanance 13 codes without having to enter it 13 times??
I'm a relative newbie to Access - I am wondering the best way to solve a problem. I am the admin for a database used to track projects and the quality control process. With this process we must keep up with the review of another database, the pieces of information entered which are erroneous and when the individual responsible corrects the data. To date, the errors have been manually typed into a memo field which is then pushed out to the end user in a report. The errors are very consistent and I want to create functionality that will allow me to select the errors (there are approximately 50 standard errors) from a list or using a button or whatever is wisest. Basically, I would love some best practice opinion here as I am totally stymied at this point.
I am experiencing some confusion in setting up a many-to-many relational database, and I would greatly appreciate any assistance that anyone may have to offer.
Currently, I have two tables: one which is a last of organizations provided services, and the second table is a list of counties in the state. While many organizations only focus their services on one county, some offer services in multiple counties. The desired end product is a website in which users can search for available service organizations based on the county they have selected.
In Access, what is the best way to link each individual entry in the organizations table to the appropriate counties in which they offer services? For example, I will need to say Organization1 offers services in County1, County2, County43, and Organization 2 offers services in County2 and County62. When a user selects County2, it should return both Organization1 and Organization2 and so on.
What is a more efficient way to store this information than just having multiple columns?
hi i am trying to order a select statement by two columns, so it first orders by type, then by value. the above code would work in php/mysql (i think!) but not with asp/access. any ideas?
how to add times together from multiple subforms and display the data on the main form. Just for backround, I am creating a timesheet to be used by our workshop employees. The form is set up in such a way that there is a combo box where they can select their name which rotates the record so all the data is specific to their id, and then there is a tab box with a tab for each day of the week each containing its own subform with combo boxes to select the project they worked on, text boxes to enter the start time and stop time for that project, and then 2 other text boxes: one that calculates time worked on that particular project and then one that calculates the total time worked for the day since they typically work on more than one project in a day. So what I need to do is to take the values from the total daily hours boxes and add them all together and show the sum in a box showing the total hours worked for the week.
My most recent attempt was to simply make an expression in the control source as follows:
Is it possible to have a text field in a table to store multiple values by using a comma or some other type of seperator? I do not want to set the field to a lookup field because the number of values that would be included would be to many to continuously look through to select. I would prefer to just manually type in what I need and use a seperator to create a multiple value field.
I am trying to concatenate values from seperate columns. Which is fine, however if there are no values in any of these columns I wish to include a dot (.). I also need to add a dot (.) inbetween values.
I am running a database in which end users input values into a table via a data access page. The problem is that there are usually lots of records in this table which requires the same value for a particular field.
I was wondering if there is a way to implement something so that the user can input the value once and the value is then copied to all the records?
