Need Help W Recordset Syntax
Mar 11, 2005
Hi,
I'm trying to set a variable equal to a subform's recordsetclone, for the purpose of looping through the subform's recordset. The problem seems to be in referencing the subform's recordsetclone.
Here's the giant set of commands that are causing the problem:
Dim rst As ADODB.Recordset
Set rst = Forms!frmMailingLists!qfrmMLMembers.Form.Recordset Clone
Whether I use Recordset or RecordsetClone, I get the same error:
Run-time 2455: You entered an expression that has an invalid reference to the property Form/Report.
I've tried many other variations as well, which cause other errors, so I'm starting with this.
I don't think that any of the other code in the Sub is related to the problem, in part because I get the same error when I run this in the immediate window.
A solution would be greatly appreciated!
Thanks,
David
/dmrst
View Replies
ADVERTISEMENT
Sep 6, 2006
Can someone tell me the VBA code for testing whether a query recordset is empty or not?
View 1 Replies
View Related
Aug 14, 2015
Special situation: The SQL Server Linked Server across the country is linked to a Read Only Oracle DB. This data pull works perfectly and populates the Subform.
The problem is that Oracle can take 3 to 6 seconds to retrieve the single record depending on the network traffic through a small pipe.
The code below shows the RecordSource for the SubForm. clicking on a list box supplies the value. Then 3 to 6 seconds later, the subform populates.
The actual Recordset for this Recordsource is needed to conduct Validation on each field. Normally this would be on SQL Server, I might just create a Recordset Oject and run this SQL statement again in 1 milisecond. In this case, it will probably take an additional 3 to 6 seconds. Avoiding another lengthy round-trip to Oracle would be prefered.
Goal: How does one grab, clone, or other wise reference the existing recordset for the SubForm?
Note: Immediate Window - One single field can be returned quickly
There are 48 fields that need validation - is there a way to reference the entire recordset?
Immediate Window during Break Mode:
? me.fsubsrNavSHLBHL("NavSH_QQ")
NESE ' this is the correct value for the current recordsource
Set a breakpoint right after the line:
fsubsrNavSHLBHL.Form.RecordSource = "Select * from vsrNavigatorSHLBHL where Well_ID =" & txtNavWellID.Value
Immediate Window:
? me.fsubsrNavSHLBHL.Form.RecordSource
Select * from vsrNavigatorSHLBHL where Well_ID =91229
View 4 Replies
View Related
Apr 27, 2007
Hi guys, I'm a bit confused: I know that opening a bound form will bring down the whole recordset. But if I create a parametered query as the recordsource, will it still bring down the whole recordset first and only afterwards cut down to the records matching the parameters?
Example: I have a clients table with 5000 clients on a backend mdb, and my client lookup form in my frontend mdb. If I open the form looking for just client "Jim Jones" (via the parameter query), will Access bring down all 5000 clients from the backend to my frontend first, and only then seek out "Jim Jones" before discarding the rest of the recordset?
For if this is true then this whole Access business is rather unsuited for networks, even a small one. I hope you guys prove me wrong.
Premy
View 14 Replies
View Related
Jul 7, 2013
I want to write a email where there are 2 or 3 different ordernumbers for same email, i want to include the email in the mail part as single column table. how to do it? also can i use result of one recordset for other recordset?
View 1 Replies
View Related
Aug 17, 2007
from a table with fields userID and Date (in which any userID has multiple records with different Date values, and other fields) i have built a select query based on Date = one specific value. can anyone give an explanation (for beginners), through a sample code, that expands the query recordset so that the new recordset includes all records per userID that qualified in the prior recordset? below is an example. thank you!
Table with records:
userID / Date
u1 / d1
u1 / d2
u2 / d1
u2 / d2
u3 / d2
...
1st Select Query (where Date = d1):
u1 / d1
u2 / d1
Desired 2nd Query based off 1st Query (where ?):
u1 / d1
u1 / d2
u2 / d1
u2 / d2
View 3 Replies
View Related
Jan 21, 2015
I have two tables that have the exact same fields. In table1 I have records that need to be UPDATED into table2. I tried an Update query and out of 600 records only half of those got updated. In my update query I joined tbl1 and tbl2 by Location (LOC) I checked for Nulls, Blanks, spaces, you name it. I can't figure why they all didn't get updated. I created a SQL query and go the exact same results. Ideally, I would like to create something in VBA to do this. I do not have any forms linked to these tables. In all I have about 600 records and 15 different fields that need to be updated. My example is only for one field.
sql example below. Which is the Access Sql in the Query
sql = "UPDATE tbl2 INNER JOIN tbl1 ON tbl2.LOC = tbl2.LOC" & _
"SET tbl2.Name = tbl1!Name" & _
"WHERE (((tbl2.Name) Is Null));"
Example.
Table1
Field1.Names = John
Table2
Field1.Names = "Need to UPDATE the name 'John' here"
I tried the Recordset .EDIT but I couldn't get it to work using two tables.
View 4 Replies
View Related
Jun 28, 2005
Hi,
in the following code:
Dim dbtmp As DAO.Database
Dim tblObj As DAO.TableDef
Dim rs As DAO.Recordset
Set dbtmp = OpenDatabase("C:WINDOWSBureaudevcli.xls", False, True, "Excel 8.0;")
DoEvents
Set rs = dbtmp.OpenRecordset("select * from [DEVCLI$A1:C10]")
in the last line i would like replace DEVCLI (the Excel sheet name) by a variable to make my program works with any excel file.
What is the syntaxe for that ?
Thanks in advance for help.
VINCENT
View 2 Replies
View Related
Nov 1, 2005
Think my syntax is wrong here, but not sure where. I would appreciate any help! Thanks!
SELECT a.[FA Ctr], a.[SAP Co], a.[SAP Ctr], a.[GL Co],
IIf([Len([SAP CO])] ="3",""0"' & [a].[SAP CO]", IIf([Len([SAP CO])]="2",""'00"' & [a].[SAP CO]"), IIf([Len([SAP CO])]="1",""'00"' & [a].[SAP CO]", "[A].[SAP CO]"))) AS Expr3
INTO [Interim Table]
FROM Asset_Map AS a
View 11 Replies
View Related
Mar 12, 2008
Hi there
I'm trying to write a query using an IIF statement in the "Field" property of the Access Query Design Grid the new Column is called F:
there are 3 Columns, System, Etot, Itot in a mytable
Basically in English the query goes,
IF mytable.[System] = 700,
mytable.[Etot] = 0,
mytable.[Itot] = 0
then the newly created derived column
mytable.[F] "N/A"
OTHERWISE
mytable.[F] "OK"
I hope someone understands,
Batwings
View 6 Replies
View Related
Dec 6, 2004
Hi,
I wud like to know why this syntax is not working.
select * from table_name where col_val like 'a%'
This returns the column values that start with 'a'. I was getting the result properly few days ago. But now suddenly this query doesnot give the result. When i tried this out in a website it was working there, but not in access.
Can anybody see what is wrong in this syntax? If the syntax is right where wud be the fault?
View 6 Replies
View Related
Dec 20, 2004
Can someone tell me how to insert the contents of a variable into a table?
I am trying to add selected items from a listbox (Members) into a temporary table (tempMembers). The code is below. On debugging, it picks up the contents of the variable (iMemberID) OK, but adds "0" to the temp table (both are integers). I'm pretty sure the problem is in the Insert statement below (stSQL3), but I can't figure out how to write it!
Any help would be greatly appreciated!
Thanks
stSQL3 = "INSERT INTO tempMembers (MemberID) VALUES & iMemberID & ;"
For Each varItm In Me!Members.ItemsSelected
iMemberID = ctl.ItemData(varItm)
DoCmd.RunSQL stSQL3
Next varItm
View 6 Replies
View Related
Sep 29, 2005
Can anyone tell me the proper syntax for:
1. Calling another Form from within a Form
2. Calling a module from within a Form
Thanks in Advance
View 5 Replies
View Related
Sep 4, 2006
Can someone help me on the syntax for the following?
I have two tables: one is TapeNumber and has one field (Tape_No) autonumbered PK. The other table has information about the video and uses the Tape_No as a secondary key.
I have a form to add information about videos. I have the form bound to the first table, so it adds a new TapeNumber when I add a record. I have a subform displaying the video information for that tape (there may be several videos recorded on one tape).
When I add a new tape (or video to an existing tape), how do I save the tape number to the second table?
Thanks!
View 1 Replies
View Related
Mar 1, 2007
have this code which keeps on giving me this error...I dont know whats wrong with the code please help tried removing the quotes (rstStudents.Open "SELECT * FROM Students WHERE Regno = " & _
txtReg , _
CurrentProject.Connection, _
adOpenStatic, adLockReadOnly, adCmdText) but then it wont retain any records even if they exist in the table
here is the original code
rstStudents.Open "SELECT * FROM Students WHERE Regno = '" & _
txtReg & "'", _
CurrentProject.Connection, _
adOpenStatic, adLockReadOnly, adCmdText
ERROR MESSAGE>>>>>>> Runtime Error '-2147217913 (80040e07)
Data type mismatch in criteria expression
the code is supposed to use number input by user to search in a table and fill all the other fields in the form with the table data (it is run on lost focus of the text box were value has been input)
the whole code :::::
Private Sub txtReg_LostFocus()
Dim rstStudents As ADODB.Recordset
Dim blnFound As Boolean
Dim fldItem As ADODB.Field
blnFound = False
If Me.txtReg = "" Then Exit Sub
Set rstStudents = New ADODB.Recordset
rstStudents.Open "SELECT * FROM Students WHERE Regno = '" & _
txtReg & "'", _
CurrentProject.Connection, _
adOpenStatic, adLockReadOnly, adCmdText
With rstStudents
While Not .EOF
For Each fldItem In .Fields
If fldItem.Name = "Regno" Then
If fldItem.Value = txtReg Then
Me.txtName = .Fields("Name")
Me.txtAdd = .Fields("Address")
Me.txttel = .Fields("Telno")
Me.txtTutor = .Fields("TutorName")
Me.txtbks = .Fields("NoBooksonloan")
blnFound = True
End If
End If
Next
.MoveNext
Wend
End With
If blnFound = False Then
MsgBox "No student record to display"
' ... and reset the form
' cmdReset_Click
End If
rstStudents.Close
Set rstStudents = Nothing
End Sub
View 2 Replies
View Related
Sep 5, 2007
I am trying to open a PDF from Access. I get it to work but it requires me to hard code the path and fiel name....
The path will always be the same although the file name will change. RIght now I get the fiel name from a textbox on a form...I am trying to change the below working code with a varaible instead of the path....I think there is some systax issues that I cannto fingure out
TotPath is the variable that holds the entire path to the file "X:Map_LibraryPark_and_Rec_AsbuiltPRA_19_73-01_W0.pdf"
This variable is rebuilt everytime the user selects something on the form....so the actual File name will change every time...
Does anyone have and ideas as to how to incorporate a variable instead of the hard coded path?
THank you all for your help.....
Code:WORKING CODE: 'Shell "C:Program FilesAdobeAcrobat 7.0AcrobatAcrobat.exe X:Map_LibraryPark_and_Rec_AsbuiltPRA_19_73-01_W0.pdf", vbMaximizedFocus ' open a txt documentNOT WORKING CODE:Shell "C:Program FilesAdobeAcrobat 7.0AcrobatAcrobat.exe TotPath", vbMaximizedFocus ' open a txt document
View 3 Replies
View Related
Jul 25, 2005
I'm familiar with SQL but not with Access97 - some wierd syntax here!
I'm creating a Query that is to Delete records from a table depending on a non-key field in a second table.
I first tried an INNER JOIN
DELETE Activity_Preferences.*
FROM Activity_Preferences INNER JOIN Activity_Key
Activity_Preferences.Activity_Key=Activity_Key.Act ivity_Key AND Activity_Key.Complete=1;
which was initially accepted but then complained about the INNER JOIN after I went in a second time to 'fix' the error.
I've finally got the following syntax accepted:-
DELETE Activity_Preferences.*
FROM Activity_Preferences, Activity_Key
WHERE Activity_Preferences.Activity_Key=Activity_Key.Act ivity_Key AND Activity_Key.Complete=1;
But when executed still gets the following error (same as for the INNER JOIN):-
'Operation must use an updatable query'.
What else is needed?
J.
:confused:
View 4 Replies
View Related
Aug 1, 2005
Hi,
In a form i use the following filter fonction :
DoCmd.ApplyFilter , "CliNom = '" & RunCli & "'"
The problem is that sometimes RunCli (wich is a name) contains ' symbol and then generates a syntaxe error, is there a way to prevent that ?
Thanks in advance.
VINCENT
View 3 Replies
View Related
Mar 2, 2007
On my form I have 2 radio buttons rdoAll and rdoSpecific. If rdoAll is true then it prints a report. THis part works fine. However if rdoSpecific is true then I make visable combo box to look up an ID. Then when I click the button I want the same form to open but with just the info pertaining to the ID selected. Here is my code:
Private Sub cmdLotHistory_Click()
Dim stDocName As String, stSelection As String
stDocName = "rptLotHistory"
If Me.rdoAll = True Then
DoCmd.OpenReport "rptLotHistory", acViewPreview
End If
If Me.cboLotLU.Value > 0 Then
stSelection = "[LotID] =" & Me![cboLotLU]
End If
DoCmd.OpenReport stDocName, acViewPreview, , stSelection
End Sub
When I choose the ID and click the button I get the message
Run-Time error '3075':
Syntax error (missing operator) in query expression '(LotID
=020806B1585)'.
the 020806B1585 is my ID number.
Debug hightlights the
DoCmd.OpenReport stDocName, acViewPreview, , stSelection
but I'm guessing my real problem lies in the
stSelection = "[LotID] =" & Me![cboLotLU]
Can anyone point me in the right direction?
Thanks,
Rick
View 2 Replies
View Related
Jun 18, 2007
I am using the folling code in a after update combobox event:
Dim rst As DAO.Recordset
Dim sqlwhere As String
sqlwhere = " "
If IsNull(Me.comboSearchSerial) = False Then
sqlwhere = "SerialNumber='" & Me.comboSearchSerial & "' and "
End If
mysql = "SELECT TBL_RMA.* from [TBL_RMA] Where "
mysql = mysql & sqlwhere
mysql = mysql & ";"
Forms!FRM_RMA.RecordSource = mysql
Exit_comboSearchSerial_AfterUpdate:
This is currently working for me with SerialNumber being a text field. I would like to use the same code substituting SerialNumber with a Date field. I know its probly an issue with the use of quotes, but I can't seem to figure it out. Also, if I wanted to use a number format, what would I use...
Thanks
Gregg
View 2 Replies
View Related
Sep 13, 2007
I am receiving this error;
"Invalid SQL syntax, cannot use multiple columns in a column level CHECK constraint."
Without explaining my disaster of a situation anyone have any ideas?
View 4 Replies
View Related
Mar 25, 2008
Hi, I need some syntax help on the following line of code:
rs.FindFirst (rs![NewRecord] = True And IsNull(rs![Event_No]))
where NewRecord is type boolean and Event_No is string. Ive used this function mainly on strings so am not sure what to do with this one!
thanks!!
View 2 Replies
View Related
Mar 31, 2006
I have a FE/BE access database. I have split it for our business processes from the original owners who decided to keep it combined. I have in my code Set rst = CurrentDb which needs to point to the BE (where the tables are) and I am struggling with getting the proper syntax. My error msgs are as follows:
"Operation is not supported for this type of object" (most likely becuase the rst is nothing)
I then get an error msg related to the form that it cannot update the StudentID field.
The help VB help module is not able to display this information..
Any help is appreciated.
Thanks
View 3 Replies
View Related
Jul 26, 2005
Greetings,
I have a form under development that is to assign an invoice number to a specific set of records based on the client, contractor and job type.
All the above are combo boxes and the first 2 have rowsource directly from tables, no problem.
The 3rd, JobType is dependent on the first 2 being identified first. Thus the query builds from information on the loaded form.
I have built a query that obtains the data needed for the combo-box whose SQL is as follows:
SELECT [Lookup:Job_Description].Job
FROM (([Lookup:Clients] INNER JOIN [Lookup:Contractor] ON [Lookup:Clients].Client_ID = [Lookup:Contractor].Client_ID) INNER JOIN Contractor_Fees ON ([Lookup:Contractor].Contractor_ID = Contractor_Fees.ContractorID) AND ([Lookup:Contractor].Client_ID = Contractor_Fees.Client_ID)) INNER JOIN [Lookup:Job_Description] ON Contractor_Fees.Job_Type = [Lookup:Job_Description].Job_Key
WHERE ((([Lookup:Clients].Company_Name)=[Forms]![frmAssign_Invoice_Num]![cboCompanyName]) AND (([Lookup:Contractor].Contractor_Name)=[Forms]![frmAssign_Invoice_Num]![cboContractorName]));
--- hope you can read that!
I have attempted to format this so that it can be executed in code under the GotFocus event. My code, which does compile looks like this:
cboJobType.RowSource = "SELECT [Lookup:Job_Description].Job " & _
"FROM [Lookup:Clients] INNER JOIN [Lookup:Contractor] ON " & _
"[Lookup:Clients].Client_ID = [Lookup:Contractor].Client_ID " & _
"INNER JOIN Contractor_Fees ON " & _
"[Lookup:Contractor].Contractor_ID = [Contractor_Fees].ContractorID " & _
"AND [Lookup:Contractor].Client_ID = [Contractor_Fees].Client_ID " & _
"INNER JOIN [Lookup:Job_Description] ON " & _
"[Contractor_Fees].Job_Type = [Lookup:Job_Description].Job_Key " & _
"WHERE [Lookup:Clients].Company_Name = " & [Forms]![frmAssign_Invoice_Num]![cboCompanyName] & _
"AND [Lookup:Contractor].Contractor_Name = " & [Forms]![frmAssign_Invoice_Num]![cboContractorName]
But something is wrong that the compiler is missing. Can anyone find the error?
I have tremendous difficulty with sql in code. Is there any utility out there that can check syntax better than the in-program compiler?
My thanks in advance for any assistance. Right now, I am banging my head against the wall.
Regards, Sorrells
View 2 Replies
View Related
Aug 28, 2005
Greetings all,
I am trying to run the query below to tell me how much stock a company has available by deducting the amount dispatched from its allocation. I am getting an error message;
Run Time error '3061'
Too few parameters expect 2
The code is;
Dim db As DAO.Database, qr1 As DAO.QueryDefs
Dim rs1 As DAO.Recordset, rs2 As DAO.Recordset
Dim varVal0 As Variant, varVal1 As Variant, varVal2 As Variant
Dim strSQL As String
Set db = DBEngine(0)(0)
VarVal0 = Me.WINENUMBER
strSQL = "SELECT Sum(tbl_Data_DispatchLineitems.Amount) AS Amount "
strSQL = strSQL & "FROM tbl_data_DispatchDetails INNER JOIN tbl_Data_DispatchLineitems ON tbl_data_DispatchDetails.DispatchID = tbl_Data_DispatchLineitems.DispatchID "
strSQL = strSQL & "GROUP BY tbl_data_DispatchDetails.TradingName, tbl_Data_DispatchLineitems.WineNumber "
strSQL = strSQL & "HAVING ((tbl_data_DispatchDetails.TradingName)=[Forms]![frm_data_Orders]![TradingName]) AND (tbl_Data_DispatchLineitems.WineNumber = VarVal0)"
Set rs2 = db.OpenRecordset(strSQL)
rs2.Edit
varVal1 = rs2![Amount]
rs2.Close
I assume the error lies in the final line of the query code. Any help to find the error would be appreciated.
Thanks in advance.
~rbinder
View 1 Replies
View Related
Sep 12, 2005
I have a function that builds a filter and it get a syntex error. It has three components and I must be missing something in combining them into the filter. SpecID and ReviewID are numbers. Selected is a checkbox and 'Yes' is a string. Can anyone see the source of the Syntax Error?
Private Function PlanFilter()
Dim strFilter1 As String, strFilter2 As String, strFilter3 As String
strFilter1 = "[SpecID] = " & [Forms]![frmMainEntry]![SpecID]
strFilter2 = "[ReviewID] = " & [Forms]![frmMainEntry].Form!fctlReviewRequests!ReviewID
strFilter3 = "[Selected] = 'Yes'"
gstrFilter = strFilter1 & " And " & strFilter2 & " And " & strFilter3 & ";"
Debug.Print gstrFilter
End Function
Thanks,
PC
View 3 Replies
View Related
