Hi All,
I have a form with a list box where you can add new names, and a bombi box that lits current names already in use. I want the form to update the combi with the name just typed in the list box. I guess I use OnExit event, but I don't know the code I should use for updating the combi list..
any pointers appreciated.
andy
Hi,
I have a combo box in which it's value changes according to user input. It is working but it is annoying to have to click the combo box for it's list to refresh. How to make it seemless?
Thank you
Currently I have a Tabular view List (of text boxes) populated from a query.
What I am looking for is a way to refresh the list. I presumed me.refresh, me.requery or me.repaint would work, but it doesn't.
If I open, then close the list it refreshes. So presumably I could close then open form for an update, but that is crude and there must be a way to do it properly?
The user navigates between two windows (client list *name and age*) and (Client info *in depth info and history*) they click on a record in the list and are taken to (client info) whereupon they can edit or add a new record. The records that are updated do so without a hitch, however the new records do not update in the list.
Paul
Essentially I have a form_A with several tab's and then one list control box in each of those tabs. At present if you double click on any item within the control boxes your taken to another form_B with info about that item and when you close that from down again if refreshes form_A.
Is it possible to only refresh the specific list control box that is active instead of refreshing the whole form ?
I was wondering if you can call a textboxes onExit event from another form? On my form a user enters a search criteria into a text box and when they exit the textbox the results are displayed in a listbox. This form is a subform on my main form. I want to be able to call this onExit method from the main form. Is that possible? When I put in txtSearchBox_Exit, I got an error saying Sub or Function not defined.
View 5 Replies View RelatedI have a form called Add New Delegation, i have combo box of Institution names on the main form and a subform for Agreements discussed. with a combo box called agreements. I successfully cascaded the combo boxes so that the agreements discussed on the subform are filtered by their respective institutions on the main form. However i am unable to refresh the list each time a new institution is selected as the Macro will not allow me to requery a control on the mainform from the subform..
View 2 Replies View RelatedBackground:
I have a continous form linked to a table and I have 3 combo boxes on the
form (linked to fields on the table). The combo boxes are called JOB TITLE,
SCHEDULE and SHIFT. The source for the combo boxes are queries named
respectively as LKUPJOB, LKUPSCHEDULE and LKUPSHIFT. For the three combo boxes listed abpve, the bound column is the first field of the underlying query and the column width of the first field is set to 0" (so that the second field of the query is displayed).
The way things should work is that for each record on the form, the
LKUPSCHEDULE and LKUPSHIFT queries (queries for the SCHEDULE and SHIFT combo boxes), the queries are filtered based on the bound field of the JOB TITLE combo box. The name of the bound field for the JOB TITLE combo is called Labor_Rate_ID.
Problem:
Unfortunately, It seems like the value of the labor-rate_ID in the first
record (i.e. first job title combo box) determines the query list used by the
SCHEDULE and SHIFT comboboxes for all the other records on the form. That is, even though the form has lots of records displayed, the combo boxes for each record don't have a complete list to work with.
Hence, the SCHEDULE and SHIFT combo boxes for some records are showing a blank (since available otions in the combo query list don't match the value
in the table for that record.
Can anybody tell me how to get a continous form to refress the list for each
record on the form.
I also don't know whether the Requery command for a macro could work and how to use it. I think though, that this problem can't be solved by a macro.
Basically, the question is around what kind of code will let you manipulate the properties of individual controls of a form at the Record level.
Pele
I have a Main form with a combo box that pulls names from a table. Alongside the combo box is a command button that opens a form which allows the user to edit the names in the table.
The problem: When a user edits a name and closes the edit form, the edit is not immediately displayed in the combo box. However, when the Main form is closed and reopened, the edit is properly displayed. Can I somehow refresh the combo box in the On Close event of the edit form?
:confused: I have a listbox which using "Table/Query" RowSourceType lists all records in table of Access 2003. The Add Record button clicked, a new record will be inserted to table, and then requery listbox.
But it's so strange, the record already existed in table, but listbox still doesn't refresh after requery, I have to presss F9 several times to refresh manually. The update record button clicked, the listbox doesn't refresh too, but when I check the value of the row, the value is new value, but ths listbox on screen shows old value. for deleting, has the same problem.
So I'm not sure, if this is a bug of Access, or I missed something have to do. I already tried many way to solve this problem (sleeping, check if updated listbox, etc), all of them aren't work well.
Please give me a help!!!
Michael
I have a listbox which using "Table/Query" RowSourceType lists all records in table of Access 2003. The Add Record button clicked, a new record will be inserted to table, and then listbox will be requery to show updated table.
But it's so strange, the record already existed in table, but listbox still doesn't refresh after requery, I have to presss F9 several times to refresh manually. The update record button clicked, the listbox doesn't refresh too, but when I check the value of the row, the value is new value, but ths listbox on screen shows old value. for deleting, has the same problem.
So I'm not sure, if this is a bug of Access, or I missed something have to do. I already tried many way to solve this problem (sleeping, check if updated listbox, etc), all of them aren't work well.
Please give me a help!!!
Michael
I did it, but it didn't work. Ever I looped 10 times.
you could try requerying the list box on the onclick event of the Add record Button
listboxname.Requery
I did it, but it didn't work. Ever I looped 10 times.
you could try requerying the list box on the onclick event of the Add record Button
listboxname.Requery
Thanks for you help. My code is
With Me.lstISG
.RowSourceType = "Table/Query"
.RowSource = "SELECT * FROM InternalServiceGoal WHERE Year='" & Trim(lstYear.Value) & "' ORDER BY Year, Department, Service_Category, Service_Category_Details, Objective, Measure;"
.Requery
.SetFocus
.ListIndex = -1
End With
Add button and ListBox on same Form. Add button captures text fileds and insert a record to database, ListBox just display all the records after click Add/Update/Delete button. All of three buttons clicked, the ListBox (lstISG) will be requery. but it doesn't work, I have to presss F9 several times to refresh the Form.
I found 2 examples of code to refresh my attached table link to sharepoint lists.
I have a scheduled task open my Access 2010 db and an autoexec macro runs and closes the db.
My problem is my tables disconnect from sharepoint 2010 and the update fails.
I added the code I found to a module and added a line in my macro to run the code. Now I cannot get the code to work.
Am I at least on the right track? I just want to know before I spend many hours getting this code to work.
These are the two locations of code I found.
[URL]
I think part of my problem is that I have a regular table that I add a txt file to that is not linked to sharepoint so I need to exclude it from the code.
Hi,
I tried in many ways, but Coudn't refresh the combo box values.
the problem is,
I hv created combo box contains Subject "Account","Maths","English". If I select "Account" from combobox, the Teachers name should display in text box which I created in form.
One teacher can take more than one subject.
Ex. First selection is Account, teacher name may be "a","B","c" and for "Maths" teacher name as "a","D","e"
By selecting particular department, the teachers name who all involving that department should display. And also
i need to display in how many classes that teacher involved in text box next to teacher name in the Form.
selecting one option from combo box then how to refresh for another selection in combo box Is anyone there pl.
your immediate reply will be highly appreciated
Thanks in advance
I have a form with a control for the user to enter some data and then two command buttons 'OK' and 'Cancel'
For the OnExit event in the control I have a procedure that check the user input and if incorrect, opens a message box with an error message asking the user to correct the data. It then cancels the event so the focus remains in the current control.
However if the user presses the 'Cancel' command button on the form to cancel & close the form, the OnExit event for the current control still fires and asks the user to correct the data.
In my code in the control, how can I recognise that the Cancel command button has been pressed, so I can cancel the OnExit event and close the form?
Hello,
I've currently got a Combo Box (in the form of a drop down list) in the main part of my form for data entry. I have recently created a seperate form called 'edit' to change current values that may be incorrect. As a part of this, I would like to make changes to the values displayed in the Combo Box (let's say there is a typo). So I have copied the combo box from the viewing page into my editing section, and made the change I want to the appropriate entry. I then go back to my viewing page, and the data hasn't automatically updated. (However, If I look at the drop down list now, the new spelling of the entry is there, the old one is gone, and I can select the new one; making the change complete. Is there a way that I can get it to automatically update all the fields that currently have the old spelling to the new spelling? (all I see on after update for the combo box is a list of my macros?)
Regards,
sugar05
I have a combo box on a form to enable users to find records. When the form opens initially, these boxes are blank. However, after a search has been performed, the selected information in the combo box stays there, as well as the record opening up. How can I make the combo box revert to being blank after the record has opened on the form?
Thanks in advance,
Gary
I have a form where the user selects a client from a combo box.
Doing so populates 4 controls with info about the client, using the Exit function of the cbo box. The Record Source of the form in question does not store this info; it comes from a different table.
This works fine.
When the record has been saved and I come back to it, however, those four controls do not display the client's information, since the combo box hasn't been exited.
What's the best way to get the form to repopulate those controls without having to reselect the combo entry?
Thanks a lot for the help!
I have a form with three subforms, and I'm having problem with one of them. The link between subforms and forms are store number, which is stored in a combo box. Idealy, after a user pick a store from the combo box, the subform would update itself. Two out of the three subforms are based on two crosstab queries and they work perfectly fine. The last subform is a select query, and it seems like it's not rerunning itself after updating the combo box. The query is very simple, it just has store number, description, and grouped by amount. I tried with no criteria in the store field and run the masterform,seems like all it's doing is showing value for the first store in the table, and never changes afterwards, I also tried entering "forms!frmStores!cmbStore" in the criteria for the store, then the subform came out empty, it seems like it's only reading combo box's default value null. I have a line of code for the mater form frmStores as "me.[DisplaySubform].requery" for all three subforms, but it seems like it's working for the first two and not the select query. Anybody can help me with this? oh, the combo box is unbounded, because i do not want my table to be updated by selection. Please help
View 1 Replies View RelatedHow do I change a combo box that I have on a form so that it will allow entries as well as edits?
View 1 Replies View RelatedHow do I requery the list box in the form after the combobox is updated? the name of the combo box is txtFilterClassName.
View 3 Replies View RelatedI have the below code behind a form so that a combo box will display a specific list of items based on the data in another combo box on my form.
I have two copies of this same form for two different departments. One of the forms works like a dream. However, when I copy that form, change the name, and update the code as pictured below, the form is asking for a parameter FROM MY ORIGINAL FORM and will not requery the combo box. I can't figure out why...there is no reference to the original form in my VBA as you can see below. I tried deleting the form and re-creating it, I tried deleting the code and re-typing it to no avail.
Private Sub cmboType_AfterUpdate()
Me.cmboAction.RowSource = "SELECT tblStatusList.Status FROM tblStatusList WHERE (((tblStatusList.Department)=[forms]![frmInquiryFraud]![cmboType]));"
End Sub
I apologize if this has probably been asked countless times; however, in my search of this forum I could not find something that seemed to work for something so simple.
**************************************************
Scenerio:
I have 2 forms. The first form is my main form and the second form is my "popup" form. Both of these forms access the same table. In my main form I have it so people can not enter in a ID so it reduces accidental data entry. Therefore, I created a "popup" box that allows ID entry.
Everything works great except when I close out of the popup form, the newly entered data is not available unless I close the main form and reopen.
Million Dollar Question:
How do I refresh or requery (dunno the correct term usage here) the main form to reflect the addition I made in my popup form. I would like the refresh event to happen when I click the close button on my popup form.
**************************************************
Again, I know this is probably simple, but I cannot find it anywhere or most likely I am blind :cool:
Thank You
I have approximately 20 people using a shared database form. When someone updates a form creating a new record I want everyone to be able to see that new form record without having to close the form down and reopening it. Each form is given a form number by autonumber.
Thanks in advance!
What is the best way to refresh a form that has check boxes, list boxes, and text fields ? The table used as source was cleared, but the form was not.
View 14 Replies View RelatedI wrote some procedures which handles each a seperate unit.
When a procedure finishes, I want to write an entry to listbox 'lbLogbook' so the users sees what's happening. But the entries in the listbox only appears when all the procedures are finished. When I go into break-mode and go step-by-step then I see the listbox filling up. Do I have to manually refresh the form or so?
Regards,
Johny
Hi,
I am having a crazy situation.
I have a form (f1)which has 2 sub forms. this form is getting called from another form(f2). When f1 gets loaded , its subforms will have a set of data, and when i want another set of data to be visible or refreshed it is not happening on the subforms.
we have tried.
form.refresh
form.requery
and also f1!subform.form.refresh & f1!subform.form.requery.
What is it that is not allowing to refresh the data on the subforms.
Please Advis.e
hari
I have a main form where information for a particular part number or job is entered. Should the part number not yet exist, Access will let you know. I have a button within the main form that opens up the Form_EnterPartNumber form which allows you to enter the new part number.
What I would hope to be able to do would be to refresh (requery?) the main form after creating a new part number and closing the Form_EnterPartNumber form..........but, keep the main form on the current record instead of resetting back to record number 1.
Is this possible?
Hi All,
This is driving me nuts!!
I have a form with a combo box that populates a subform with data equal to the combo box value. I have added "<ALL>" to the combo box to display all records if selected. The after update code changes the queryDefs. The problem I have is that when "<ALL>" is selected, no records show. But the query has updated. If I close the main form and reopen it all the records show, but if I select a new value nothing happpens. But the actual query has updated. I have tried many combinations of refresh, repaint...etc.
Anyway, here is the code, any help appreciated.
Private Sub cboFeedMtrl_AfterUpdate()
Dim qryAllMat As QueryDef
Dim sql As String
Set dbsCurrent = CurrentDb
Set qryAllMat = dbsCurrent.QueryDefs("qryViewData")
If Me![cboFeedMtrl].Value = "<ALL>" Then
qryAllMat.sql = "SELECT * FROM tblMachineSelection"
Me![frmViewData].Requery
Else
qryAllMat.sql = "SELECT * FROM tblMachineSelection where [feed Material] = [Forms]![frmView]![cboFeedMtrl]"
Me![frmViewData].Requery
End If
End Sub