Is it possible to increase the number of columns in Access 10?I upgraded MS Office because I knew Excel no longer restricted you to 256 columns. I often pull data from a data base that uses as many as 800 columns.When I try to open these files I get a "too many cross tabs" error prompt.
View RepliesHi
Is there any way i can increase the amount of columns in a table before importing data? I am importing data from a notepad doc that needs abt 300 columns but i can only get abt 100 columns.
Thanks for any help
I have created a list that has 5 column. Data is filled in list using a query. I know how to remove 2 columns, but I do not know how to increase the width of columns.
View 2 Replies View RelatedI have a table, tblEvents, which I use to store information about a meeting, training session or field trip, including the [StartDate]. I also have a table, tblEventDays, which I use to store the [DayNumber] 1, 2, 3... At the moment I have to enter the day numbers in the subform frmEventDays manually, but I would like to add button controls to increase/decrease the number of days for each event (i.e. add a new record where [DayNumber] is incremented by 1, and delete the last record if I have added too many day records).
I have added button controls to my EventDays subform and managed to use the macro builder to select and duplicate the last [DayNumber] record, but cannot figure out how to increase each successive [DayNumber] by 1.
1. Add a day...
Option Compare Database
Private Sub AddDay_Click()
?
End Sub
2. Remove a day...
Option Compare Database
Private Sub RemoveLastDay_Click()
?
End Sub
I just came across a problem that I didn't recognize before. I had an invoice table and corresponding form that had an autonumber for the invoice number. The problem now is that I would like the invoice number to begin at 256 and then increase incrementally, because I had some previous invoices from my books. How to go about doing this.
View 5 Replies View RelatedI'm using Dmax() to return a max number in a field which I then want to inc by 1 for a new record. Dmax is returning 999. I believe Dmax therefore thinks it's a text field. So where do I change this to a number field?
View 2 Replies View RelatedHow can I add an ID-number that always increases (by 1) each time I add a new record to a table (using a form)? I want to always use some info from the record that was added last to fill in a different form. The reason for my question is that I heard that the autonumber does not necessarily increase each time a new record is added...
View 1 Replies View RelatedHelp anyone
I have a small database which lists delegates for courses.
I have a venue which will hold only a small amount of people
is there a way of stopping data entry when it gets to a certain point. ie putting a limit on how many columns can be entered on a single table
I have to submit a file to a government agency that requires more than 200 columns. Is there a number of column limit an Access table can have?
View 1 Replies View Relatedhi there
how many columns is the maximum in a query?, because i have one that has 26 columns , but i need some more... what can i do?? is there a way to add some empty columns to a query??
thanks
Is there a way to change the formatting of a numbers column to the formatting :
1 = 0001
11 = 0011
111 = 0111
1111 = 1111
But that would have to apply to this also
1 - 2 = 0001 - 0002
11 - 22 = 0011 - 0022
111 - 222 = 0111 - 0222
1111 - 2222 = 1111 - 2222
If that makes sense ....
I have a table in a database with 7 columns. The data is sorted by Date1 in descending order.
For each pid I want to put the sequence numbers
First record has two conditions
If string 2 is null then start numbering from sequence1
If string 2 is not null then start numbering from sequence2
If string 2 = string1 then
Sequence1 = 0
Second record has two conditions
Number sequence2 with the value 2 or 3 depending on the line one
If string 2 = string1 then
Sequence1 = 0
Else
Sequence1 = next number
Same condition for the rest of records
I have a report that constists of 4 subreports.I need the first two subreports to render in a two-column format and the 3. and 4. in a single column format.Unfortunatelly I cannot it work as I need to.I have read, that setting the main report in a single-column format and the subreports in a two-column format with "first across then down" setting (Or something like that) is and option.
Unfortunately this option does not fit my requirements.Is there a possibility to set the number of columns through VBA and change it across the different parts of the report?
I am working with a large database of 8,000+ entries. We have five tables in this database, but mainly use three of them. The main table is "OAKE Main Table" which is basically a list of all members our organization has had. Each member has accounting data linked to their member ID number which has been generated by ACCESS, and can be accessed or edited by clicking on a sub table next to each member. The accounting data that has been manually entered in the OAKE Main Table can be found in the Accounting table.
Here's my issue. I need to be able to extract a list of transactions from this accounting table since January 1st. I can do this no problem, but all I get is the member ID and the accounting data. How do I get ACCESS to include the member ID's first and last name? or maybe even the first, last name, address, city, state, zip, etc so that I can get a list of people who have made donations, for example?
I'm assuming this will have something to do with the relationships we have set up in our table. Here's a picture of it. I have no clue how to make this work.
Hy everyone
I have to make a report based on data from 5 queryes, the problem is that any of the 5 queryes could be with no vales in it and the queryes has diferent numbers of columns. I tyed union query but it gave me an eror because of diferent number of columns.
In design wiev I aded the queryes but now if any of the query has no data in it the output quey is void.
Here is the SQL statement from the query the db is to large to post it:
SELECT qryIpsosFiltruUserData.*, qryIpsosRacitorUserData.*, qryIpsosSilozUserData.*, qryPastaMixerUserData.*, qryRocaGipsUserData.*, *
FROM qryIpsosFiltruUserData, qryIpsosRacitorUserData, qryIpsosSilozUserData, qryPastaMixerUserData, qryRocaGipsUserData;
Please help a newbie.:confused:
I have a table ("Student Info") that looks like this:
ID....Student.....Student #......Teacher Name......Teacher ID
1........A...............432...............Alice.. .................62
2........B...............674...............Alice.. .................62
3........C...............875...............Alice.. .................62
4........D...............934...............Katie.. ................18
5........E...............345...............Katie.. ................18
6........F...............134...............Dan.... .................4
7........G...............734...............Dan.... .................4
The above table suits me well for data entry.For analysis reasons, I want it to have another table or query or something (let's call it "Teacher Info") that looks like this:
Teacher ID....Teacher Name....St1.....St2......St3...St#1...St#2...St#3
62......................Alice...........A......... B........C.....432.....674.....875
18......................Katie...........D......... E........-.....934.....345......-
4........................Dan............F......... G........-.....134.....734......-
Is there any way that I could do this? I have been struggling with this for a while.Just so you know how this data is connected - At the moment, I have a form where I put in new Teacher information. I have a subform attached to that, where I put the student names and numbers. This way, the students are linked with their student #s, and each of them are linked to a teacher. Unfortunately, the table ("New Teacher Registration") that this creates looks like this:
id....Teacher Name
62...... Alice
(+ tab).........A.........432
...................B.........674
...................C.........875
18.......Katie
(+ tab).........D.........934
...................E.........345
4........Dan
(+ tab).........F.........134
...................G.........734
I created the "Student Info" table (above) from this to work with data entry (drop-downs and such). Now I'd like to create a "Teacher Info" table (above) for analysis.
I am trying to split a number sequence (Ex. 25372-400-E10-0000-D0021) Where the third number in the sequence can be either 2 or 3 numbers/letters.
The idea is to have a query that will split this number into its individual parts. I have seen several forums about splitting two numbers and such but I can't seem to make that work when I need to create 5 columns from this one field.
I've made a crosstab query and would like to use it to create a subreport. In the column headers I have names of courses. Courses can be added or removed. How can I make a crosstab report with dynamic columns?
PHP Code:
TRANSFORM Count(tblCourses.CourseName) AS CountOfCourseName
SELECT tblNmscStaff.NmscStaffFirstName, tblNmscStaff.NmscStaffLastName,
tblNmscStaff.PtOrFtNtl, tblNmscStaff.Ntl, tblNmscStaff.NmscID
FROM tblNmscStaff LEFT JOIN (tblCourses RIGHT JOIN [tblNmscStaff/CoursesPointer] ON
tblCourses.CourseID = [tblNmscStaff/CoursesPointer].CourseID) ON
tblNmscStaff.NmscStaffID = [tblNmscStaff/CoursesPointer].NmscStaffID
GROUP BY tblNmscStaff.NmscStaffFirstName, tblNmscStaff.NmscStaffLastName,
tblNmscStaff.PtOrFtNtl, tblNmscStaff.Ntl, tblNmscStaff.NmscID
PIVOT tblCourses.CourseName;
I'm new to Access. We have a database that was created years ago and has been working fine. Now suddendly we get the following error message on a query.
"The number of columns in the two selected tables or queries of a union query do not match"
This is the code
SELECT [TimeSheets All].[Job Number], [TimeSheets All].Date, [TimeSheets All].Details, [TimeSheets All].[Start Time], [TimeSheets All].[End Time], [TimeSheets All].[Unbillable hours], [TimeSheets All].Who, *
FROM [TimeSheets All]
WHERE ((([TimeSheets All].[Job Number]) Like [Forms]![Search]![Job Number]))
ORDER BY [TimeSheets All].[Job Number], [TimeSheets All].Date;
I have a form I created in the past that auto-fills some of its fields based on the user's selection of a record from a combo box linked to another table. The form has been working perfectly however I recently tried to add a couple of more fields to the form that need to be autofilled. I added the new fields to the source table and added columns to the combobox that should allow my VB code to fill those boxes. However only one of the new fields is filling correctly. After trying a few different things I notice that the problem seems to be with whatever data field becomes the 21st column in the combobox. Is there some sort of limit on the number of columns contained in the data source for such a box?
Option Compare Database
Private Sub EmpIDAutofill_Change()
Me.EmployerCatAutofill.Value = Me.EmpIDAutofill.Column(1)
Me.StreetNumAutofill.Value = Me.EmpIDAutofill.Column(2)
Me.JobCityAutofill.Value = Me.EmpIDAutofill.Column(3)
[code]...
Hi,
I have a question.
I want to make a action on every 2 hours on the form.
On form time interval, I set 1000
Private Sub Form_Open()
a = "00:00:00"
End Sub
Private Sub Form_Timer()
On Error GoTo Err_mess
timelabel = CDate(a) + cdate("00:00:01")
Err_mess:
End Sub
I want to start 00:00:00, and then add 1 second on every time interval=1000.
eg.
00:00:00
00:00:01
00:00:02
00:00:03
...
...
01:00:00
How can I make it? Thanks.
I have created a table in which there is one column of type memo. When I copy the content in this column it is allowing me to enter only 255 characters. How to increase the length of this column type memo?
I have a query with GroupBy. Is it causing me the damage? How to overcome this situation.
I have a form with multiple fields on it. We will call them SLO
They are text boxes and there are 6 of them named SLO1, SLO2.....SLO6
What I want to do, is use VB to update each as a string to a table individually. But Id like to only type the code once, and use a DO WHILE and increase the value by one. Example.
Current Code looks like this:
Private Sub UpdateButton_Click()
Set rstNewInventoryDataRecord = CurrentDb.OpenRecordset("Select * FROM MetricData")
Set CurrentForm = Screen.ActiveForm
Dim Counter As Integer
Counter = 1
rstNewInventoryDataRecord.AddNew
rstNewInventoryDataRecord.SLO = CurrentForm.SLOT1.Caption
rstNewInventoryDataRecord.Update
MsgBox "Update Complete"
End Sub
What I want to do is use the counter to increase by one after each loop and stop after 6. So...Do while Counter < 7
And increase the CurrentForm.SLOT1.Caption by one each time.
I've tried
rstNewInventoryDataRecord.SLO = CurrentForm.SLOT & Counter.Caption
and
rstNewInventoryDataRecord.SLO = CurrentForm."SLOT" & Counter.Caption
As well as a few other ideas all to no avail. Is this possible?
I have an 18.8MB Access application consisting of the following:
140 tables
410 Queries
67 Forms
5 Macros
26 Modules
It's not a lot of data storage, but is very computationally and mathematically intensive. As we continue to develop and expand the application, I noticed last week that we suddenly experienced a massive falloff in performance. Access is taking an incredibly long amount of time to traverse the querydefs collection, find objects, etc. It seems that the object collections themselves are not indexed, meaning that it takes a much longer amount of time to run a compiled and saved query than it does to simply build the SQL string and execute from within code. I continue to hunt for coding bottlenecks and any other efficiency problems I can find. Has anyone else experienced this? Is there a "critical mass" for the object containers?
Please help if somebody knows the way to increase the character limit of field from 255 to max. possible.
Thanks
Navkesh
How to increase field size in a certain table from 10 to 50 from Database (programaticaly).
View 1 Replies View Related