I have a form... everything looks good. Sometimes it pulls 5 records, sometimes only 2....
Is there a way to only print the first result no matter what. Whenever there is an extra couple results I do not want those to print.
I have a report which includes several subreports. There will be times when a subreport prints partially on one page and completes on the next. I don't always want to break to a new page with this subreport. However, I would want to break to a new page if the subreport cannot fully print on the current page.
View 3 Replies View RelatedI've used the following code on the footer on print procedure:
Private Sub PageFooterSection_Print(Cancel As Integer, PrintCount As Integer)
Me.PageFooterSection.Visible = (Me.[Page] = 1)
End Sub
This works fine when you view it in print preview, but the footer don't show up at all when you actually print it.The reports default view itself is set print preview.
My client wants to print a report when there is enough records to fill a page.
There are two tables involved, a tbl_Clients and tbl_ContactNotes which is a sub of the clients table
Data entry takes place every time there is a conversation with a client. Some of these contact notes are very small, one or two sentences.
The want to save a tree or two so is there a way to determine when there is enough records to fill a page knowing that each one is a different length.
I have a report with field "Plot" as Group Header. I need to print the report
which lists the owners of each Plot. When the number of owners is large, it takes more
than one page for the listing. How can I force a new page for each new Plot ?
I've got a report that spits out a barcoded label for items on my inventory. What I'd like to know, is if there is a way in 2010 to allow the user to select where on the page for the label to print.
I found a way that looks like it worked for 2007, but it required enabling ADO, which I am not able to do on my work computer.
I am working on a change control database where the users can enter a new version for the software they just released and send out a notification to the appropriate persons. I have a form where the user can select a combobox to pick the software version, which is bound to my "Releases" table. From the software version I use a DLookup in VBA to change the value of a another unbound text box using:
Me.Release_Type = DLookup("[Release_Type_ID_FK]", "Releases", "Release_ID_PK = " & Me.Release_ID)
This all works fine when I'm entering data in the form, but if I want to print the form, the unbound text box on each page is only calculated from the first record. The same thing happens if I build a report with the same fields and code.
For example: In print preview the text box on page 1 should say "Cat" based on the current record and the text box on page 2 should say "Dog". However, they both say "Cat"
How do I get the text box to display the new value on each page?
I have a database of high-school football players, and I am looking to print out single page reports (or forms) that will show detail from several tables and queries. This will act as their resume when they visit schools on recruiting visits. The reason for needing query items, is that I have developed queries that return the most up to date height, weight, 40 time etc., and that single most up to date number is what should print, not the entire table. When I try to build a report it will let me bring in multiple tables, but not queries.
View 2 Replies View RelatedI have a report that lists states and cities within the states. When a state name happens to be at the end of the page the individual cities appear on the next page with no State heading. I solved the second page problem by setting the "repeatSection = Yes" in the Section Header (though I haven't shown that in the example below).
But the previous page (which just shows the State Name and no cities looks dumb. Is there some sort of solution.??
(Actually I would also like any State that continues to a next page to not just have the state name but something like
" Colorado (Continued)" Is there anything I can do in VB to make a page break if the section is going to print but therer isn't enough room for one detail line?
This is what I currently see
Alaska
Ancorage
Prudo Bay
California
Whittier
Anaheim
Colorado
------------------------Page Break ---------------------------------
Denver
Pueblo
Colorado Springs
Deleware
Dover
-------------------------------------------------------------------------------------------
Thanks !
If I have a report and it has controls (labels representing column titles) in the page header. Now when I print the report - if it happens that the last page has no detail records - but there is text boxes and so forth in the report footer. Is there a way to not display the page header on the last page?
I have a report where the last page shows the page header - and the field/column labels on the page header - but for which there is no detail records left to display - on the last page. There is report footer information that should display. It just looks weird because the field/column labels show at the top of the page - but there is no data remaining to print under them on that last page.
Hi All,
I have a data access page needs a filter by a dropdownlist, the dropdownlist used is a html control and I use javascript to filter the data programmaticlly in the onchanged event of the control.
MSODSC.DataPages(0).Recordset.Filter="AppID = 3";
My problem is, when this statement runs, the page refreshes. But I don't need the page refreshes, it set the dropdownlist text to the default text, not the value user select. The browser is IE7.
How can I stop the page refresh itself?
Thanks and Happy New Year!!
I have one-page forms which print a second page, blank except for a block of grey shading at the top. I have tried moving the content of the form up but that doesn't eliminate the second page. If I look at print preview, every second page of the entire database shows up as blank, regardless of where that happens to appear in the record.
View 2 Replies View RelatedI have a report that should only show 1 page yet I have 2 and one is blank . I cannot find out why?
View 3 Replies View RelatedI am trying to create an invoice report. I want to add all the costs from the detail section in my footer. I have accomplished this in either the Report footer and/or the page footer, but the problem is that the report footer doesn't go to the bottom of the page, and the page footer doesn't go to just the last page. I have tested a bunch of suggestions that don't seem to work.
1. Print page footer with Report header = NO - only works if your report is two pages or more.
2. Private Sub PageFooterSection_Format(Cancel As Integer, FormatCount As Integer)
If Page = Pages Then
Me.[TextBoxName].Visible = True
Else
Me.[TextBoxName].Visible = False
End If
End Sub
The Page functions worked, but it did not change the results from page to page. If it was a two page report, then the if statement is false and the text box was not visible on page 1, but it also was not visible on page 2.
How can I print a report and at the same time programatically set the printer name and 'Print to File' option and set the path of this option?
View 1 Replies View RelatedI have a form which my company wanted that each single record should be printed from form. I made a print record button and put code to print single page or record. However as a natural habit people go to file > print to print which leads printing all records so 1000's records start printing. Is there any way i can hide print button. File >Print button.
View 1 Replies View Relatedto automatically create a second, third, fourth... page depending on how many characters are in the narrative. The only other thing needed to be changed is the page# of Page#.
So right now my form looks like below
CAD#
Person name
Charge
Narrative
"
"
"
"
"
"
"
"
"
"
"
"
"
Officer name date page # of #
Thanks in advance.
Matt
Hi All
I have added the Allen Browne Calendar 2k control to my form.
My form consists of 4 pages. On pages 2 and 3 I have subforms and on page 4 I have Personal data. Page 1 is general data and the Calendar is on Page 1.
What is happening is that the Calendar is also being displayed on my 4th page, in the same position as page 1. When I try to move it, cover it or delete it from page 4, it is also gone from page 1.
Any suggestions please?
Many thanks
Tee :(
I have made a report on my query. The page setup is all around merging 0.2" and page size A4
When i view this report in preview it looks all my data whatever i want in a page but after every page it will generate a blank page.
I have included my report.
I have a form with six tabbed pages on it. Since data entry follows in a logical order I would like to put a command button on the bottom of each page (subform) that can be used to go to the next page. What I am going to though? If i put a command button (open form) then it opens the whole form not as a subform on a tabbed page. if I try and put a command button (open page) then it will not let me enter the page number. Hope that makes sense! Any ideas
View 3 Replies View RelatedI am trying to create a report that has the dates go accross the page and not down the page .
Example:
Need:
Jan 2014 Feb 2014 March 2014
Ans so on. I will also need datat under each date.
I am having issues with the reports to give me the output that I need.
I have an unbound form with an associated report. When the user hits the 'print' button on the form/screen, the report is launched in the background. In the On Load event of the report I populate the report fields from the forms field as so:
Code:
Me.txtAddrMainLine2 = "NAME " & UCase([Forms]![frm_OrderRx].[txtPatientName])
This works like a charm as long as I call the report in Print Preview mode (i.e. with acViewPreview). But if I send the report directly to the printer, none of the fields print.
I've read about using other report events to populate the fields (e.g., On Format and On Print) and also something about using TempVars to pass the data. But I haven't read anything that's clear and definitive about the full answer.
I have seen large projects in which there are clearly several printed database reports printed out to make one booklet.
1. How does one get page numbers for multiple reports to go in sequence instead of starting over again at 1 for each report.
2. How can you add a page reference in one report to something in another report?
Do you have to do these things by hand or is there a way to create a something with auto numbering capabilities? Do you do it by importing the reports to MS Word and creating a master document?
Hi, I have designing an internal works database to hold projects. My question is this; I want to display data on a web page, for example to list the projects directly from the database tables (so other people can view the projects that are outstanding).
Does anyway know where I can find an example of this or do you know of a website that shows you a walkthrough on how to do this.
Thanks.
I made a couple of reports.But when I want to view or print them,default page set up is for Portrait,I want Landscape.Each time I open database i have to go to Page set up and change it .Is there a properties where I can change it pernamently??
View 1 Replies View RelatedHi
Does anyone know a basic and quick way to write to a table in a database using a web page instead of a form? the webpage is stored locally as is the database
Thanks
Ben