sql1="select * from Exam where StudentID ="+s1+"and dateField='"+dateField+"'";
I am trying to compare the date given in the text field and the date in the table .
I am getting Data type mismatch in criteria expression. Can anyone suggest me a correct query .
Regards
xxx
In VBA, how to compare date variable with date/time field from table, as when defined the data type in table, date/time option is the only choice for date data type even though I don't want the time portion.
View 13 Replies View RelatedI have attached a sample database. Basically I want to have some lines of code that generate the result table, which is tbl_readmit_result.
As you can see, the difference is the addition of a new column called re_admit_status.
Rule is:
Status = "y" when the admission date, compared to the previous discharge is less than 7 days, otherwise "n", for the same pt_id. You cannot compare the two dates on different pt_ids.
Is there a way that this can be done automatically without having to go through the record manually?
Hello all
Ihave tblyear contain ( B_date and E_date )
in anoter form have feald ( invdate ) i wnat ( Invdate) is between B_date and E_date of the tblyear.
Thank u
hi guys/gals!
can u compare date and time in sql?
what i nid is the query showing date and time where time is between 8-530 and date is between (user-defned). it counts how many instances in the datebase occurs during the set date between the said hours.
ex.
date time(8-530)
1/1/2004 30
field name used was [start time] where start time is a date/time data type
ex.
start time
9/20/2004 6:43:47PM
the ff is what i'm using and it doesnt work:
SELECT Calls.[Start Time], COUNT (Calls.[Start Time]) as Exp1
FROM Calls
WHERE Calls.[Start Time] Between [Date1] And [Date2] AND Calls.[Start Time] Between 8:00 AND 17:30
GROUP BY [Start Time];
thanks in advance!
I have a table with employee names and there start time and stop time for their shift. There is also a start time and stop time which they cant work during their shift. So I have shiftstarttime and shiftstoptime and codestarttime and codestop time. I have to create a table with the employee names and generate a time called outboundtime. This outboundtime starts at a specified time (e.g. 9am) and runs for a specified time (60mins). This outboundtime has to be within the range of the employees shift and cant be within the range of the cant work time. If it was, then it would start after the codestoptime for that employee.
I have been trying "if then statements" but I can't seem to compare a range of time to another range of time. Only a specified time to a range which is making things confusing.
Hi all,
I currently have two strings that look like this 070707 and 020709. What i need to do is compare these two dates and see which one is greater.
Is there any easy way to do this since the year is just yy instead of yyyy?
Thanks in advance
Hi,
I try this way but it doesn't work
SELCT * FROM TABLES WHERE ApplDt > 2007-10-01
which format I have to use.Thanks
Mark
I don't know if anyone else has had this problem when changing from one year to the next, but I haven't found any postings regarding date compare issues. I have a two-fold problem:
1. I have a combo box that lists available dates from a table in Descending order so the most recent date is on top. This worked in the last half of 2006, but when the year changed it is now listing the 2007 dates at the bottom of the list. The field is a Short Date in mm/dd/yyyy format. How do I list them in descending order (01/02/2007, 01/01/2007, 12/31/2006, 12/30/2006...)?
2. The user can also type a date in this field to enter a new record that isn't in the table, but I have After_Update code that also compares the date entered with today's date and gives a message if they enter a future date. This also worked in 2006, but now it is populating the future date message if they enter a date in the past. Here is part of the code:
'*****************************************
Private Sub cmbDate_AfterUpdate()
Dim strDate As String
Dim intResponse As Integer
strToday = Date
If IsNull(cmbDate) Or Len(cmbDate.Value) < 1 Then
MsgBox "Please select or enter a valid date."
cmbDate.SetFocus
Exit Sub
Else
strDate = cmbDate.Value
End If
If strDate > strToday Then
intResponse = MsgBox("You entered a future date. Do you want to continue with this date?", vbYesNo)
If intResponse = vbNo Then
cmbDate.Value = Date
Exit Sub
End If
End If
'**********************************************
I would appreciate any advise.
I have a table that shows Part Numbers. Each part number can be listed multiple times depending on how man Build ID's it is associated to.
Example:
Part Nubmer 123456 could be associated with:
Build Id's F187, A910, F001, C810, E010, C809
or it might only be associated to 1, 2, 3, 4,or 5 of those Build Id's.
What I want my query to do is find any Part Number that is only associated with anything less than all six of the Build Id's.
Example:
Part Number 123456 is only associated with:
Build Id's F187 & A910 or only F001 & C809 or only E010.
If this was the case I would like for that Part Number to show up in the Query along with whatever Build Id's it is associated with as long as it is not associated with all six Build Id's. The Build Id Field is also part of the table.
Any help on how to do this.
Hope all of this makes sense.
Thanks!
Is there a way to compare the value in one field with the value of the same field in the next record? I can do it in Excel by using the following formula:
=If(A1=A2,"Match","No Match")
But I need to be able to do this in an Access query?
Any ideas?
Date:
Date...............Item...................Status
200601............A........................OK
200602............A........................Not OK
200601............B.......................OK
200602............B........................OK
200602............C........................OK
I want to construct a query which can only show result as follows:
200601............A........................OK
200602............A........................Not OK
200602............C........................OK
..by comparing the status change
Any brilliant idea? (preferably not using dlookup)
Hello,
I am just wondering whether there is any query I could use to compare the data on, say, whether all data in Table A are in Table B although some records in Table B may not be in Table A and give me the record that is in Table A but not in Table B.
Thanks!
Hi all
I want to view vehicles due for servicing in the next week. The queries giving me this information work fine. I have a form that I can select, from a drop down box, either 1,2,3 or 4. A report is then run and emailled to the appropriate people. After testing to see what was the easiest way to remember what the last week was (I tried setting the combo box to remember the value but it did not, unsure why, I also tried recording Mondays date in a field in a table and assigning each Monday a value 1-4 then running a query...long story short, to time consuming) I have used a table with one field to hold the value and after emailling the report, an update query adds one to this field and it is displayed above the combo box in a txt box. I want to reset the value to 0 if the value equals 4 before the update query runs. Is this the best way to do it or can someone suggest another way of doing this.
Thanks in advance
Craig
Hi,
I am trying to compare two columns' values within the same QUERY table, but I kept on getting the "Data type mismatch in criteria expression" error. What am I doing wrong?
Here is my Select Query Statement:
SELECT qryDedparmDedetail.EMP_ID, qryDedparmDedetail.[Employer Amt], qryDedparmDedetail.[Employer Actl], qryDedparmDedetail.[Admin Amt], qryDedparmDedetail.[Admin Actl], qryDedparmDedetail.[Employee Actl], qryDedparmDedetail.[Employee Amt], qryDedparmDedetail.FirstOfSTATUS, qryDedparmDedetail.FirstOfAGENCY, qryDedparmDedetail.FirstOfTITLE, qryDedparmDedetail.FirstOfFORMAT_NM, qryDedparmDedetail.RepUnit, qryDedparmDedetail.FirstOfDEDTYPE_CD1 AS Expr1, qryDedparmDedetail.SumOfNBR, RepUnit.REPUNITDESC, qryDedparmDedetail.LeftType
FROM qryDedparmDedetail LEFT JOIN RepUnit ON qryDedparmDedetail.RepUnit = RepUnit.REPUNIT
WHERE (((qryDedparmDedetail.[Employer Amt])<>"Employer Actl") AND ((qryDedparmDedetail.LeftType)="01"));
I have a table of customers who report trouble on their equipment. I would like to compare the date in the current record to the previous record to see if it occurred within 30 days. Can I do this with an SQL query or expression?
View 2 Replies View RelatedI am putting together a database for work, I have a table that is used to refer to (this table is part of our production system) in this table it lists products run, dates run and who has run.
I have the training records data table, this lists; who, machine and status: "trained" "refresh required" " not trained"
I want to build a query so that it searches the production table for the last 6 months worth of records & if an operator that is in the training table (WHO) as status (trained) is not in the production table it outputs a "to be refreshed" report or amends the records from trained to "refresh required" ...
I am building a tracking database where we would be able to track information which field are null data and report them to our Administration to fill the null data. For this I have created a form name "Search" and I have a combo box control on that form which is bound to "Table = employee" and its ROW SOURCE TYPE="Field List", I would like to able to query records where the selected value in this combo box is null through out the table.
For example if I select "Telephone" from this combo box dropdown, I would like the query to show all the records where the "Telephone" is null, how to set the criteria in query to take the combo box value as "Field Name" and then compare it with the Field/Column in the table and show the null values.
I have a table that has entries recorded with date and time in one field, and I want to have a query that returns all records of a specified date or date range, regardless of the time in the field.
I have tried
Code:
Between [StartDate:] And [EndDate:]
And
Code:
Between [StartDate:] & "00:00" And [EndDate:] & "23:59"
Neither of which work ....
Is there some free software somewhere to allow me to compare the vba in two differnat access dbs highlighting the differances??
THanks
Hi All:
I need a mechanism that takes the excel spreadsheet or table and determine if there are any new deal groups. (In this spreadsheet I allready have a deal group field) I will be using Book and DealGroup as combination primary key to compare against the table "8 -- YTD Principal Investments" which will hose the YTD numbers and serve as a historical table we will update throghout the year.If there is a new deal group the append into table "8 - YTD Principal Investments"
Thank you
Please help with query/report. I have the following problem.
One student evaluates course before and after. There is several questions related to this evaluation (all are same before and after) and for one question there is 5 possible answer (stored in option group)
I would like to build a report or a query where I can compare data from each student (before and after) for all questions. Is this possible to do in access.
So, StudentA: questionOn: answer: one columen: before, second column: after…. Next question.
running 3 queries together.
1 qry has a date parameter of start/end date(running before the 3 are together)
Have a field in 1 of the 3 queries with a date field that I need to show being <= the date parameter...
How/where do I use this criteria?
I have a date and time stamp in a Date/Time field of General Date format (3/1/2006 7:52:25 AM).
I wish to select query on the table's Date/Time field by date portion only (3/1/2006) and not include the time portion (7:52:25 AM) of the field.
Using this expression in the query's criteria - "Between [Enter Start Date: (MM/DD/YY Format)] And [End Date: (MM/DD/YY]" will not return the date ranges as desired without also typing in the full time string.
How can the date integer be parsed out and the query properly expression ed on the criteria field without using VB?
I currently have a query set up which responds and filters by the date.
I use the current code in the criteria on the query for todays date less 7 days
Code:
DateAdd("d",-7,Date())
This works perfectly and I had no problem with it. However I need to adjust the criteria so it is less than 7days ago OR OLDER....
How would I go about doing that?
I have a query based on a table which has a date field. the field both in the table and the query have the time also in the date value so when I try to query on a date I get nothing if I copy the date and time from the field I will get the result for that record if I just use the date I get nothing. I have tried the format which does display just date but if you click on the field the time is also there You must be able to query for a date only and get all the records.
View 11 Replies View Related