Question Re Security Ms Access On Network
Feb 11, 2006
HI
I'm doing some support for a company who's access is on a network. I think it must have been setup so that their login to the network determines whether they can access it or not, although it still asks for a username and password.
Anyway I have a local copy of the database and a username and password for the administrator. But I can't open the copy I'm getting the error
" you do not have the necessary permissions to use the "filename" object. Have your system administrator or the person who created this object establish the appropriate permissions for you"
I was hoping to be able to work on the database without having to be on site all the time. Is there anyway around this? or do I have to go back onsite to resolve it, and when there how do I do it :confused:
tks
View Replies
ADVERTISEMENT
May 19, 2007
I have an access database that I created and setup user level security. I have encrypted the database and followed the directions of removing the admin from the admins group and created the new *.mdv file. When I access the database I get prompted for a username and password. When someone else from another computer accesses the same database they don't get prompted for anything and can go in and edit or access anything in there. Is there a way for me to secure the database up so they can't do this. The whole purpose of me setting up the User Level Security was for all users to have to login to there respective groups.
Thanks
View 7 Replies
View Related
Oct 5, 2007
Ok.. I have done this before at another job, but this network (or stupid me) is giving me trouble. I'm trying to setup a database security (login/password) for a database on a network. I setup the security levels..setup a seperate workgroup... From my computer it logins fine with the correct workgroup.
I setup a link:
"G:Maximizer DatabaseMaximizer.mdb" /wrkgrp "G:Maximizer Databasemaxsecurity.mdw"
Under my network login it pops up with the correct login/password prompt.
On others, it goes into the database under "READ ONLY" but gives them access to the database in read only. It should using that workgroup.
Any suggestions?
View 6 Replies
View Related
Jun 4, 2007
I'm making a version of my dba using the upsizing wizard, then i'm packinging it to distribute it as a runtime version and save the data on sql server
But i'd like to be able to keep track of who is adding what to the database.
How can I check who added what data? from which station? how can I monitor things in that setting?
Also if 2 users open the same form I'd like to restrict the second user, and have a window poping up telling him/her "you cannot add data to this table until user#123 is done with that table" a little bit like quickbooks does.
View 4 Replies
View Related
Aug 14, 2006
I've never used the security in access before but I have designed my database and have used the security wizard to set my security. it has now put a shortcut on my desktop which is now used to open the database.
The problem is that now I need the database to be opened from other computers on the network. Ive tried to simply open the database file from other pc's on the network but I get the permissions error, Ive tried copying the shortcut from my origional desktop short cut and modifying the targets but that also didnt work.
Anyone have any ideas how I can make this happen?
View 1 Replies
View Related
Mar 26, 2007
I've read and gone though quite a few of the scrips and examples for creating logins and security and i'm getting to the stage when i need to have good understanding of the different methods.
Some of the examples whilst create a user login do not really allow for security within the database whilst the build in security wizard would appear to offer that functionality.
I am thinking that I will use the Workgroup file and that method. My question is am i able to utilise the fact that if a person 'AdamA' logs onto the database which is built into the workgroup security file. am I then able to take 'AdamA' to populate a table which records actions by a user? (I can't seem to find any thread or book reference to doing this)
View 4 Replies
View Related
Apr 1, 2006
For the past several years I have been designing and building Access databases. They are designed for small evironments to be used on one machine only.
I am now faced with a situation where my client would like to have his database placed on his network server so it can be accessed by several computers.
This is a little outside my area of expertise.
I have searched the forum but I keep coming up with references to front end and back end and other things I don't understand.
Can someone point me in the right direction to search for:
what should be on the netword and what should be in the computer.
what changes should I make to the database stand-alone vs. network.
what unexpected problems should I expect.
Or perhaps you could suggest a book I could buy to assist me.
Many thanks
View 12 Replies
View Related
Jul 4, 2014
I have problem sharing an Access 2013 file from one cumputer and then change the data in the file on another computer, or i can change it but the change wont be made one both computers.
I'm working so i need my secretary to be able to change information or add, but i also need to get the change.
View 2 Replies
View Related
Nov 29, 2005
Hi guys,
does anyone know if there are issues using Acess on a wireless network? There seems to be problems access the database now that this has been installed... Lots of reboots required etc...
Ta muchly
View 1 Replies
View Related
Oct 24, 2007
We have 11 computers on the network. One has an Access back end file. When we try to open this file via the network some of the computers can open it others get the follwing message.
"Microsoft Access cannot open this File
This file is located outside your intranet or
on an untrusted site. Microsoft Access will not
open the file due to potential security problems.
To open the file copy it to your machine or an
accessible network location."
Do not understand why all the coputers cannot open the same access database file. Please Help Regards Keith
View 12 Replies
View Related
Nov 1, 2007
Hi,
I have an Access database that needs to be secured and I have 2 problems:
1) How do I get it across a network so all users must enter their password?
2) How do I stop this from asking for a password for every database (i.e. I only want one database to require the password)?
Please keep answers simple as I am quite new to this!!
View 7 Replies
View Related
Feb 13, 2008
Hi, Guys
Im just wondering what the maximum number of simultaneous connections to an ACCES 2007 DB over a network,(obviously a mapped drive).
I apologize if this is a double post....
Cheers
Tristan F
View 2 Replies
View Related
Jun 14, 2005
Might be a stupid question as I know a lot of access but it's the first time I'm doing this:
What's the easiest way to deploy an access database (mdb) on a domain network to clients?
View 3 Replies
View Related
Nov 3, 2005
Hi.
I was wondering if any of you have had experience firsthand or knew of reasons why an Access 97 database should not be installed on a WIndows 2000 network?
Russ
View 3 Replies
View Related
Jan 23, 2007
There are posts elsewhere on this forum about the adjustments you can make to Access to improve its performance on a wireless network, i.e. make sure you have XP SP2 and not an earlier version of XP, but the fact is that no programme will perform well on a network if the network isn't performing well. Here are a few things I've learned (the hard way!)
- Use USB wireless adapters, not card type adapters. One of the prime rules of wireless networking is to keep your adapter - and your Router - away from electrical equipment and metal objects, so why anyone even makes card adapters is beyond me.
- Place your adapters/Router as high as possible (above head height is best) using a USB extension lead for the adapters if necessary. Do not put them on or near metal filing cabinets!
- Think about line of sight when placing your equipment. If your Router and an adaptor are just on either side of a wall , opposite each other, the signal may only have to pass through, say, 6 inches of wall. If they are at opposite ends of their respective rooms, however, it may have to pass through several feet of the same wall!
-If there are other wireless systems nearby using the same channel as yours, change yours to a different channel even if the other signal is weaker than yours. Remember that you need to be 5 channels away from anyone else before there is 0% overlap in the frequencies. If you cannot achieve this because there are too many nearby networks, any difference is better than none.
I have a 9 user (each in a separate room) p2p network in my office running a split Access 2000 db. The place looks a bit odd with USB adapters stuck high up on the walls but it works. Only one user has the occasional hanging problem (about once a week) but she's using an oldish laptop with only 256k of RAM and it has to run Norton Internet Security at the same time. Three of the users have the db open more or less constantly, the rest have no problem or speed issues getting in whenever they wish.
Nearly forgot, our Wireless system is standard 802.11g. max distance from an adapter to the router is about 80 feet.
Sorry if any of the above is stating the obvious, thought it might help.
View 1 Replies
View Related
Apr 30, 2007
I am running a small access database over a wireless network which all worked fine (still does on 1 wired/3 wireless) with not too many problems total of 6 machines (5 wireless/1 wired). I have just replaced two machine as they were getting a bit old 3years. But these two new machines do not seem to have full rights to the access database, in that I can open the database and view records but when you add data you get a Disk Error message. I can open and share word documents etc but not the database – if I reverse this set-up I get the same problem the wired computer can open and save word documents but again not the database - what am I missing!!!
SET-UP = All machines have Windows XP Pro and Office 2003 with all windows/office updates done, all connected to the same workgroup etc. Two new machines are Dell with Dell Wireless adapter. No server just workgroup and database in a shared folder on one computer which is hard wired to the Netgear wireless router. I have not run any network wizards and I don’t think I need to, just sharing the folder should be enough? Windows is managing the dell wireless adapters, file and print sharing is enabled, other computers can print to this computer, but I just can’t get the database to share correctly – I have also checked “References” and all looks fine.
View 5 Replies
View Related
Jan 22, 2008
I have created the time booking application in access. (Application will alow autherised user to enter daily work done) My Idea was to put this file on the server and ask each employee to log in and enter information. But whenever I try to run application from other than my pc(On which file is created) it flashes error and can't run some of the form. It works absolutely fine when run from my pc. Why this hapens? What is the solution for this? Can access application is sharebale over network?
View 10 Replies
View Related
Jun 10, 2012
Some of my users have laptops and usually at work finish, they remove their laptops. The issue occurs when they restart their laptops again without network access and then they have some dialog boxes showing below messages:
"Your network access was interrupted and you should close MS access and restart."
When OK is pressed, some other messages like " Object invalid or not set" appears and by pressing many time OK, it does not reset. Last option is to use "Ctrl+Alt+Del".
View 5 Replies
View Related
Jun 13, 2013
I have a small Access DB (multi-user) on a network that keeps turning into a read-only DB, with a message bar saying please save as . . . and it will not let you complete that. It seems to lock the application, and when I can get everyone out and copy the file out I can finally get it back to its normal state.
View 3 Replies
View Related
Feb 8, 2006
Hi all...
I have an ACCESS 2003 application with front end in the local machine and backend on the shared network drive. I mapped this drive to E: in my computer and all my linked tables show the E:folernameDatabasename.mdb as the source.
When I install this application in an other computer where they have mapped the same drive to F: , I am getting error that says "E:foldernameDatabasename.mdb" not found. How can use absolute network drive(like \cscrd eamfoldernamedatabasename.mdb) name to link the tables?
Thanks in advance.
View 6 Replies
View Related
Feb 8, 2006
I have completed a database for a company with 60 000 clients and over 100 000 job records.
The database works at very resonable speeds on the Server computer, or the computer on which I installed the back end of the database.
Each of the other 3 computers on the wireless network, have a local copy of the Front End on their machine, and reference the Back End (BE) on the server computer.
Each of the Client computers have varing speeds when accessing the BE, some as slow as 10 minutes for a simple search, filter or just loading a form.
What can I do to improve performance across the network?
Do I need to install additional components on the other computers to improve the db performance?
Your help will be much appreciated.
Joseph.
View 10 Replies
View Related
Apr 2, 2006
Hi there,
I want to link an excel sheet to my database but I dont want to link the location with a drive letter but instead linking the network address. How can this be achieved?
In addition, I want to startup application with a command line in a access macro and used this line but it doesnt work.
\Tgsshs11data.nl.post.comocc&sqa$OPS_ProcessesReportsAwkward est.txt
In general how can you work in access with network path strings?
best regards,
Paul.
View 1 Replies
View Related
Apr 2, 2006
Hi there,
I want to link an excel sheet to my database but I dont want to link the location with a drive letter but instead linking the network address. How can this be achieved?
In addition, I want to startup application with a command line in a access macro and used this line but it doesnt work.
\Tgsshs11data.nl.post.comocc&sqa$OPS_ProcessesReportsAwkward est.txt
In general how can you work in access with network path strings?
best regards,
Paul.
View 1 Replies
View Related
Nov 7, 2007
Hello,
I found a somewhat related thread but thought I would post a new one just in case my problem happens to others who were 'forced' to "upgrade" to Windows Vista Home Basic when buying a new machine....
Okay, no more complaining, here's the issue:
I have a small (8 MB) Access 2007 database stored on a machine in the office which is running Windows Vista Home Premium. There are two other machines running Windows XP Home (SP2) that can connect to the Access 2007 database with no issues.
But on my Dell Inspiron Vista Home Basic machine, I cannot successfully open the database stored on the Home Premium machine. I CAN see this database, I can see other files and open/copy them, but I cannot open the database. I am attempting to do this using the wireless connection.
I tried running these two commands as the administrator (found on another forum) because I think this is more of a network problem rather than an Access 2007 problem specific to Windows Vista Home Basic
netsh interface tcp set global rss=disabled
netsh interface tcp set global autotuninglevel=disabled
But these two commands did nothing.
I should also point out that when this database is stored on an XP machine (one of the others in the office) the database opens just fine on this Vista Basic machine!
I'm confused and frustrated! Any help is very much appreciated.
Thank you,
Mike
View 8 Replies
View Related
Feb 11, 2008
I have created multi user access application. I have kept it on server and all users access that application from there desktop pc. Can I set time out for application? Means, Session of each user must be note more than 10 minutes. I want to add this functionality for avoiding the application blocking.
View 2 Replies
View Related
Aug 23, 2012
I have Access as front end and SQL Server as back end. The Access application is placed on a common network drive for theusers to access it. The compact on close option is enabled when the access application is closed.
I have a local copy of the access app. When I close the app, it takes ony a few seconds. But when on a network drive, it is taking 2 mins.I just wanted to know if the time taken to close the application on the network drive can be brought down without disabling the compact on close option.
View 1 Replies
View Related
