on the audit trail modul
when the field is combo box I need to capture the combo's column(1) to my audit trail table
i used the code :
If TypeOf ctl Is ComboBox Then
rst("OldValue") = ctl.OldValue.Column(1)
End If
but it's not working
can any one help me with that
many thanks in advance
I am working on setting up a Document Control System and have a table, called List_of_SOP where I have, amongst others, the following fields:
- Document Title
- Document Number (unique identifier)
- Responsible
- DL (where this is a multiline lookup column where one ticks the names of the people to whom this document needs to be distributed)
I want to be able to fill an array with the checked values of the DL field, given a particular Document Number. So far, the code is somewhat on these lines:
Dim rs1 As DAO.Recordset
Dim rs2 As DAO.Recordset
Dim rs3 As DAO.Recordset
Dim db As DAO.Database
Dim strSQL1 As String
Dim strSQL2 As String
[code]....
I have a combo box with the following 4 columns:
ItemID, Item_Name, Item_Cost and Taxable.
The fields are Autonumbered, Text, Currency and Yes/No, respectively.
I am trying to SUM sales tax, in the form footer, based on the Yes/No settings. Some items are taxed and some are not.
So far, I am able to get tax calculations on everything, only.
With this code as Control Source for the footer control:
=Sum(IIf([Taxable]=0,([Item_Cost]*[Quantity])*0.0556,0))
I get tax calculated on every item, regardless of its taxable flag.
When I use:
=Sum(IIf([Taxable]=1,([Item_Cost]*[Quantity])*0.0556,0))
I get no tax calculated at all. Always comes out zero.
For some reason, the calculation isn't distinguishing the Yes/No values for each record, independently.
Can anyone assist me in fixing this?
I have a combo box with three columns bound to column 1.
I want an If statement to execute on the value of the contents of column 3 which contains text C or D.
How can I do this? I've tried
If Me.MyCombo.Column(3)="D" then
TakeSomeAction
Elseif
Me.MyCombo.Column(3)="C" then
DosomethingElse
end if
Thanks
My combo(cbxCombo1) has two columns - The code below is working on the ID - Bound Column in cbxCombo1 Where what I actually want is the second column(the bound column has to remain 2 in cbxCombo1 as I am inserting text and not an ID to the table...So what I actually need is to stipulate column1 in strSQL = "Select " & Me!cbxCombo1.
Private Sub cbxCombo1_AfterUpdate()
Dim strSQL As String
strSQL = "Select " & Me!cbxCombo1
strSQL = strSQL & " from tblModels"
Me!cbxCombo2.RowSourceType = "Table/Query"
Me!cbxCombo2.RowSource = strSQL
End Sub
Cheers
Andy
I have a combo box with 5 columns. When I click it I want to display columns 1 to 4, together with the headings. But after making my selection, I want column 5 stored in the field.
How can I do that? Currently it is storing column 1.
Thanks,
Dave
I have a combo box that has two columns, the second one is bound.
Is there any way to reference the 1st column (the unbound one).
What I actually want to do is have the 1st column show up as a status line message or as a quick help message when the combo text is mouse_overed. The problem is the combo box field is a date that is unique 99 % of the time but in that one percent the user needs to see the beginning of the 2nd column ( think of a persons doctors appointments, where one percent of the time a individual needs to visit the same doctor twice in one day , in which case the procedure and the date becomes the selection criteria (but I don't want to show the procedure and the date in the combo box because the procedure is so darn long.)
Confusing enough?
Any ideas?
Thanks
I've created a form with a combo box to allow users to set the Manager of an employee. I've set the control source for the combo box to the Managers table that contains a primary key and the manager's name.
I've set the bound column to 1, the column count to 2, the column widths to 1;2 (I want to show both columns in the drop down because users can identify managers by either their name or Manager ID).After updating the combo box, the Manager ID shows rather than the Manager Name. Is there a way to have the Manager name show instead of the Manager ID without setting the column widths to 0;2?
i have a table of 3 columns Named as C_Name, C_City and C_PIN..i have a combo box with All Value (All,C_Name,C_City and C_PIN)...i want to display All columns ,when i select All in Combo box and when i select Column C_Name, only display C_Name Column).
View 6 Replies View RelatedI am having a problem entering the 2nd column of a combo box.This is a lookup combo looking at a table called Accessories. The combo is looking up 4 columns in the table, the first column is called "Action" the 2nd column is called "Item". I click on the combo box in the form and decide on the action I want and click that row, it then enters the action I have clicked. But it is the "Item" column I want to enter on the form not the "Action" column.
This only works if I make "Item" the first column which I do not want to do. I want to keep the combo columns in the order they are but enter the 2nd column not the first. I have tried making the bound column the 2nd column but it still enters the 1st column. I am sure access must be capable of doing this but I cannot work out how. It seems you can only enter whatever is in the 1st column.
I'm looking for a work around for getting the bound column setting for a combo box to work. I created a simple table with 2 fields that i have a combo box pointed to. My settings for the combo box are
Column count 2
Bound column 2
The first field is "Description"
The 2nd field is "ID"
I cannot figure out how to have column 2 to be the value that is left in the combo box once I have made my selection.
Hi everyone,
I have a combo box that is populated from a table called tblProducts.
There are only three fields ID, Model and Description in this table.
ID is the primary key field and is an Autonumber
In the form when a user selects a product from the combo box the "Model" fields is displayed which is how I want it.
I am doing a query that should show the "Model field however when I run the query it shows the "ID" field which is useless information for the end user.
How do I show the correct field in the query?
Hi,
I have a combo box which is populated by a table with the fields ID, First Name and Surname. What I want to do is display the first name and surname concatenated and hide the ID column, but populate the field with the ID number.
Is this possible?
I have a form that has a combo box (box1), Its row source is from a table (table1) than the forms record source (query1). The data box1 sources is from column1 in table1.
I then have a text box (box2). I need it so when i select a record in box1 (from column1) that it displays the corresponding data in that same record (and table) but from column2
Example:
A table has a column with equations and another column with the answer.
I select "1+1" in the combo box
Then in the text box it displays "2"
In short, I have a form that has a combo box containing people type values. Then two text entry boxes, firstname, lastname. Then an add, update, and delete button...
When the person type is chosen from the cbo, and the names are filled out, and the 'add' button pressed a query sends the values back via sql insert, and a listbox next to these controls then lists the new person records. Great - No worries...
Then, when someone wants to update the record now shown in the listbox, on double click of the record in the listbox, vba repopulates the name text boxes from the listbox's columns values (easy), and then *magically* the person type combo box chooses amongst its values the value stored in the person type column from the listbox.
I can't get the combo box to be set to the value that I am grabbing from the listbox's column values.
Code:
cboContactInfoType.{magic happens here} = ListBoxOfficeContactInfo.Column(3)
txtContactInfoValue = ListBoxOfficeContactInfo.Column(4)
txtContactInfoValue2 = ListBoxOfficeContactInfo.Column(5)
Part of me wonders if I would have to program in a way to search among the combo boxes values and find out which one was selected from the listbox, find it's index value and then set the combo box to be that index/value record... but that seems like a hard way to do it... and I'm not exactly sure how?
There are 3 column in a combo box, ID is bound column
Part no ID Description
0040 1 class 40-1
0040 2 class 40-2
0040 3 class 40-3
0041 4 class 41-1
0042 5
0042 6
When key in part no 0040, 3 rows under 0040 will be listed out only, filter and match as value entered only. do not show others part no in the combo box selection.
I have combo boxes that contain attorney names and phone numbers. The attorney name is what is filled into the field when a selection is made from the combo box into the form. The phone number is just there for the occasions that the person managing the data in the database needs to call that attorney. Just a quicker way instead of having to go to another form to find the phone number. I created a query to combine the first and last name to one field (FullName) and this is where the combo box gets it's info.
When I run the query, the phone number is shown formatted as I want it to ((###)###-####), but in the combo box in the form, the phone number has no format to it. What I need to do to get the phone number to show up formatted in the combo box list?
Ok....Just when you think it's all running smoothly.... :(
I have a combo box, MDLastName, with a column count of 9, with column 2 displaying and all others hidden. The selection made with this combo populates 7 corresponding fields (first name, address, etc). It's working perfectly.
The first problem I encountered was with identical last names, but different corresponding data. When I selected Jones, for example, it would populate the first Dr. Jones and his info, listed in the table. However, if I selected the second Dr. Jones in the combo list, it was still populating only the first Dr. Jones' info. I resolved this by binding the fist column (ID, aka primary key), but still hiding all colums but column 2. First problem fixed..
Next, I have a Word Template document bookmarked to receive data from the form, frmDenial. I have all the coding working fine and dandy to insert the data from the fields on the form, save, and print. However, instead of inserting the text from the MDLastName, it is inserting the primary key (because it is the bound column in the combo box). Now, because of the first problem discussed above, I cannot change the bound column to column 2 (containing the data I need in the Word Template). How can I get the right info to appear in my template with the bookmarks?
My form's 10 column combo-box (based on a query) won't break into text cells. Some of the columns contain numbers, some test, some phone #s. All columns show when I click the Combo-box in Form View. Access Help File said to put:
=Forms!Customers!CompanyName.Column(1) in the ControlSource for the text cell. Tried that and was returned #Name? for any of the fields in which I tried it.
My expression was:
=frmSpartanStudentBehaviorLog!Last_FirstUC.Column (3)
The other properties in combo-box are set correctly: ColumnCount=10, Column Widths are correct.
I also tried the expression:
=Last_FirstUC.Column(2) but got the same result #Name?
I'm baffled. As a very new user, I'll appreciate any assistance. Thanks.
I have a form that is a datasheet. it contains multiple records. One of the fields in that datasheet is a combo box. I would like to make it so when I select a value from the combo box it changes all the values of the other records in that column/field to what was chosen from that combo box. is that possible?
View 4 Replies View RelatedAm I correct in thinking the only way to have a combo box with different values in each column is to create a table and then bind the combo box to the column you are referring to if you want it to represent a value from another.
For example if I have a combo box with the words January, February etc can that combo box have a corresponding month number value in a separate column (this combo would be derived from a list) or would I need to create a table holding both the month names and numbers and then bind to the name value for selection but use the month number value?
The reason I ask is I wasn't sure if for every type of list I wanted with multiple column values, I would need to create a table.
My problem is I have two tables. One of the tables was made specifically to draw information from to populate the second table. The second table has a combo box that draws information from one of the fields from the first table. What I am hoping to do though is have each selection from the combo box in the second table to draw different information from another field in the first table and use that data to populate another field in the second table.
Simplified: Combo box in Field (1) on table two has multiple selections that I want to autofill the data in Field (2) on table two based upon the selection of the combo box. Data from both fields in table two would come from two different fields from table one.
I have tried to work with the After Update button in the After Events section on the ribbon at the top; however, I am simply lousy with coding. Is there an easier way to do it other than using that option?
I have a multiple column combo box on my form, that is correctly populating. When I make a selection, it displays the result from the first column. Bound column seems correct, as my table is being populated correctly.
1 - Can I display the values from both columns after the selection has been made?
2 - If not, can I choose to display the second column (not the first) after the user has made a selection?
I have added a combobox to one of the forms in my customer database using the "find a record in my form based on a value in my combobox" section of the combobox wizard.I have a number of columns in the combobox (the primary key is the bound value, and I have unbound columns for first name, surname etc).
I sorted the records in the combobox by column 3 (surname) so I can scroll through the list and choose surname instead of having to memorise customer numbers. Now I have more than 1500 records (with more on the way), scrolling through takes ages, and I was wondering if there is a way to adapt the combobox so I can (for example) type the first letter of a surname into the box and be taken to surnames beginning with that letter, whilst retaining the primary key as my bound column?
My initial thought was to base the combobox values on a query, and make the query prompt for a starting letter (or string of letters) each time it runs, so it only displays the query results in the list, but I was wondering if there is a neater way to do it?
In my form my combo box displays a list from a query called DORP-HDR that has 3 columns
DORP-ID | CODE | NAME
and displays them like that is the drop down list
The form field that the combo is bound to takes the numeric-id field as its value. In the combo control wizard i nominated that value, and in the properties pane bound column value is 1.
and in the properties pane the row source is:
SELECT [DORP HDR].[DORP-ID], [DORP HDR].[CODE], [DORP HDR].[NAME] FROM [DORP HDR] ORDER BY [NAME];
So far so good. I have created lots of combo boxes before like this.
But this time i want the second field in the list (CODE) ALSO bound to another field in my form . So I want the combo to transfer two values not one. How do i do this?
How to change a combo box to a text box control in a subform for a field that is based on a two-column value list. I want to be able show the value in the unbound column (which is a text value instead of a number).
My subform has a field called "ProjectStatus". This field is a value list in my projects table with the following row source:
1;"Built";2;"Unbuilt";3;"Active";4;"On Hold";5;"Completed (Master Plan)";0
So, it is set as a two-column value list with a number data type for the bound column. In my forms, column 1 is made invisible (set to 0") so that only the text value is shown to the user. This works fine with combo boxes.
However, I want to change the unsightly combo box to a text box and show the text value of the unbound column (this form will only be used to show data not for entry). When I change it to a text box control, the value that appears is a number, of course.
If ProjectStatus were based on a table, rather than a lookup value list, I would query it but I am not sure how it should be done with a value list. I could just store the text value instead, I guess, and redo a bunch of stuff or I could create a "Status" table and redo a bunch of stuff (this seems like my lot in life lately) but I feel like there should be some way to do this.