I have a form bound to a query. The query result has a field that I would like to reference, however I do not want the field on my form. Is there a way to reference a field in the query results that is not on the form?
View RepliesI create a query in access 2010 to merge into a word template.
It all works fine but I can't seem to get the contents (a graphics image - signature) into the query file.
Not sure what to reference for the attachment field when I'm creating the query.
I have a large table that is appended daily. I need to be able to specify two dates, a start and an end, and pull only the records in the table with those dates. There will be two records for each account number, one from the specified start date and one from the specified end date. I then need to calculate the difference between a value in a single field from the end date and a value from the same field from the start date. DLookUp will not work because there is an input parameter. How could I accomplish this task?
View 2 Replies View RelatedI have 10 fields on a subform. they are named value1 to value10 consecutively. I would like to loop thru them, and get their values to use in subsequent events. I tried the following to reference them...
Dim iLoop as integer
Dim fldVal as control
Dim ItemValue as string
For iLoop = 1 to 10
fldVal = ("Forms![Form 1]![Subform 1]!value" & iLoop)
ItemValue = fldVal
Next iLoop
I also tried a couple of other variations, but cannot get this **** thing to work. Any help would be appreciated.
Hi All
I am trying to reference a field on a sub form from a button on the main form. I want to read a field called "Date1" and I want Date1 from the first row, regardless of which row has been selected by the user. The statment used is
FrmGroupSubform.Form!TxtDate1.
Any ideas PLEASE
Steve
When entering a lookup reference to a table field it pop up message saying, "you can't modify the table 1 this time as it is in use by other person or process" i have closed all forms and table reports but the problem is same to rectify ? also when going to see the realationship then there shows no relation ship developed even after the lookup reference from one table filed to another table field.
View 1 Replies View RelatedI had this line :
GBL_Tab05ID = Me.Tab05ID
and wanted to change this. I have this on the On Current event and it gives me an error because the data is not in the record source when the form opens. How can I change the me. to the formname? The form gets dynamically created so i have
Dim CurrentForm As String
CurrentForm = Me.Form.Name
then i put
GBL_Tab05ID = Forms(CurrentForm).Form.Tab05ID
but that did not work...what is the correct syntax?
I have two tables, Table 1 and Table 2 and two related forms, Frm1 and Frm2. I want to be able to update the data on Table1 from Frm2, that is, if I change the data on Frm2, the corresponding fields in Table1 will update to the same data. I know that if both tables are open I can reference the fields on Frm1 and Frm2 with an IF statement: If Active = True And Forms!Frm1a.DoNotchange = False Then..And I know on the update query I can reference a control on a form by Forms!Formname.Control. Wll works fine.What I would like to know is can I reference a table field in the same way. For example, I have tried to use the IF Statement If Active = True And Tables!Table1.DoNotchange = False Then..Is there a way to reference the Table instead of the Form in both the VBA and the query? The problem seems to be that I have the two bound controls [Active] on Frm2 and [DoNotChange] on Frm1. (Which I need).
View 5 Replies View RelatedCan anyone help?
I have few of these columns in my query
Loc Company Pack RoundedNum SumTotal
2 ASDA AA 1
2 ASDA AA 5 6
1 Asda AC 2 2
1 ABC BB 10
1 ABC BB 1 11
2 XYZ AR 1 1
I am trying to achieve "SumTotal" column result. In the above query RoundedNum is an expression achieved from other columns(not shown above) from the same querytable. Now I want to insert this "SumTotal" column which will count for Total RoundedNum as per same type of Packs.
Thus the Total Field should look like the one shown above. Any idea how can i achieve this? :confused:
Thank you in advance.
I would like to update two fields [Category] and [ProdType] in tblAccum based on a reference table.
The reference table is tblReference and contains the fields [Code], [Category] and [ProdType].
tblReference example of field values:
Code Category ProdType
A Blank Accessory
BS Blank Blank Stock
O Printed Offset
So if the Code field in tblAccum has a value of O then based on the tblReference table the Category value would be Printed and the ProdType value would be Offset.
Any help is greatly appreciated.
Thanks,
use an account reference from one field in a table on a second table and add a number after it... e.g.
Table 1 Table 2
PEFA PEFA/001
PEFA PEFA/002
PEFA PEFA/003
PEFA PEFA/004
and so on...
I have an access db that is linked to a sharepoint list (the list originated in Access).I tried a simple select query with parameters to search for by id and another query of the same table to search by date.They both come back with the same error of "cannot reference a table with a multivalued field using an IN clause that refers to another database"Iv'e gone through the table and these fields that the query is using and none seem to have any multivalues.
View 6 Replies View RelatedI am working on an form (using Access 2000 and VBA) that stores registration information, along with events that were attending, in a table and later retrieves that same information from the table to display the regist. info, events attended, and allows the user to change any current info along with adding new/recently attended events to each record.
I am currently allowing a max of six events, along with event details, to be stored and I am running through six different if statements to match the Event_List (name of the combo box that contains "Event 1 Event 2...Event 6") to the appropreiate information in the table. I have started to simplify the code to remove the redundancy by running a Do While to to find the correct Event by using an integer variable that starts at 1 and is incremented until it matches the 7th character (the number portion) of the Event chosen from the Event_List. After this I want to use that integer variable to say what event information in the table to gather. My problem is this: I have tried many different varieties of the following code and I am unable to make it work. I had never used Access up until a week and a half ago, and a few days ago I went and bought the book "Access VBA Programming for Dummies" but it doesn't help for this problem. Here's part of the code:
Variables (Event_Name, PMT, Receipt, Payment_Type, PIF) refer to Form textboxes while the variables in the [] refer to table field names.
'------Code I'm Currently Working On-------
Dim intX As Integer
Dim EventVal As Integer
Dim strX As String
intX = 1
EventVal = Val(Mid(Event_List, 7, 1))
Do While EventVal <> intX And intX < 6
intX = intX + 1
Loop
strX = str(intX)
Dim E_Name As String
Event_Name = [Event strX ]
PMT = [PMT strX]
Receipt = [Receipt strX]
Payment_Type = [Payment Type strX]
PIF = [Paid In Full strX]
'-----Old Code That I'm trying to simplify-------
If Event_List = "Event 1" Then
Event_Name = [Event 1]
PMT = [PMT 1]
Receipt = [Receipt 1]
Payment_Type = [Payment Type 1]
PIF = [Paid In Full 1]
Camp_Site = [Camp Site 1]
Cabin_Number = [Cabin Number 1]
ElseIf Event_List = "Event 2" Then
Event_Name = [Event 2]
PMT = [PMT 2]
Receipt = [Receipt 2]
Payment_Type = [Payment Type 2]
PIF = [Paid In Full 2]
Camp_Site = [Camp Site 2]
Cabin_Number = [Cabin Number 2]
ElseIf Event_List = "Event 3" Then
Event_Name = [Event 3]
PMT = [PMT 3]
Receipt = [Receipt 3]
Payment_Type = [Payment Type 3]
PIF = [Paid In Full 3]
Camp_Site = [Camp Site 3]
Cabin_Number = [Cabin Number 3]
PLEASE HELP!!!!
I have a query which gets information from 2x tables where the I'd on one table is the reference number on the second table.I would like to know how I can remove the duplicates on my reference number field?
View 3 Replies View RelatedI have a form/subform that requires some fields from the Switchboard for its criteria. Last week due to no action on my part, it started asking for those values as Parameters instead (Forms!Data!txtInspDate), etc! The new form loads, but of course it is blank with no data. This happens if I load it from a command button or from the navigation sidebar... UNLESS I first load the switchboard in Design Mode, go to VBA window, then reload the Switchboard in Form Mode and press the button. From then on until I close the database, everything works fine!
View 9 Replies View RelatedIn my form (source tblJobs) i input a contract number from tblContracts. but i would also like it to show the contract address when the contract number is entered. Both fields belong to tblContracts but i only wish to enter the contract number, the address will just be used as a reference as it isnt something i would have to enter again.
So for example
112 - Main Road
If i enter 122 in my ContractNo field i would like it to show the contract address for that specific contract.
Can i do this? If So how?
I have placed an unbound subform on a form. I have the following code which loads in different datasheet to the subform:
'Loads in NewQuery
Me.data.SourceObject = "query.NewQuery"
'Loads in NewQuery2
Me.data.SourceObject = "query.NewQuery2"
etc.... this works fine to show these queries but i want to know how to reference the fields on the datasheet.
for example one of the fields in NewQuery is "ID"... When clicked i want to run code... normally on bound subform i could go for example ID_Click()... msgbox(me.ID)
how can i reference these other fields on unbound???
I want Access to automatically generate a reference number for a record based on the values in on two other fields for a given record using a form.
The first field is called Operation Number.
The second is Bag Number.
The reference number needs to be in this format: 19C.3.1
Where 19C is the Operation Number, 3 is the bag number, and 1 is automatically generated. Additionally I need the last number --the automatically generated one--to go back to 1 if with each new bag number.
This is kind of like library catalog numbers. Not sure how to do this.
Hey Guys!
I have a problem concerning the ability to make a reference to another column in the same query.
I have two columns. Column 1 works perfectly, but in column 2 I want the outcome of column1 (coachingdato1) inserted instead of #17-07-2006#.
How is that done???
Thanks in advance!
//JR
Column1:
coachingdato1: (SELECT Max(coaching.dato) FROM coaching WHERE sælgerdata.sælgernr = coaching.sælgernr)
Column2:
coaching1: (SELECT coaching.[1] FROM coaching WHERE sælgerdata.sælgernr = coaching.sælgernr AND #17-07-2006# = coaching.dato)
I have a query that currently calculates a rating based on various values entered into the database. This rating corresponds to a Quality Index value based in another table. I tried to set up a query that links the rating value in the query to the Rating in the table, however, when I run this query, I don't get all the results I should. Is there some other way to make this work? I thought it would be simple to link the rating value that is calculated to the rating in the table and have it report the Quality Index value associated with that value. Please help! :confused:
View 5 Replies View RelatedHi,
Trying to run an append query for a specific record on a subform but won't recognise the subform control.
The Master form is fmSickEdit do I have to reference the Master file in the SQL?
The SQL for the query is:
INSERT INTO tblDisLetter ( SickID, DateAdvisedDisciplinary )
SELECT tblSick.SickID, Date() AS [Date]
FROM tblSick
WHERE (((tblSick.SickID)=[Forms]![fmsubSickListEditVersion]![SickID]));
Thanks
Hey guys-
Been trying to figure this out, but am stuck. Obviously I'm fairly new to Access...
I have a table of properties and the price those properties sold for. Each property is in a specific area of town. I want to take each record and display the Address, Area of town, Price it sold for, and then the AVERAGE PRICE of all the other properties that sold in that same, specific area (not all the other areas of town, but the same area that the property sold for). The result should be displayed as below-
-Address- -Area- -Sold Price- -Avg Sold Price in Area-
And then it will list every property in the database, each with the same calculation all in one grid/table/dataset.
I figured out how to write a query to average all the sold prices in each area- but I don't know how to display that in conjunction with each record. Can someone throw a hint at me here?
Thanks
Hi all,
I'm trying to get a public function to work within the design view of a query. The function is defined as:
Public Function Percentile_(fldName As String, _
tblName As String, p As Double, _
Optional strWHERE As String = "") _
As Double... ( I can put the whole code if u need it)
Any thoughts about how I can make the Percentile function calculate values according to a GroupBy statement and not for whole data set?
I created a query that pulls information from 2 other queries and everything was going fine until I saved the query. I now get a circular reference error
SELECT [CashValue Link Query1].Facility,
[CashValue Link Query1].[Financial Class],
[CashValue Link Query1].Date,
[CashValue Link Query1].Date,
[CashValue Link Query1].[Total A/R],
[CashValue Link Query1].Current,
[code]....
I have a main form "KZ_SEARCH" and within this I have a subform which is loaded when a button is pressed and is populated with query results (based on text entered in a text box). The subform is called "KZ NOTICES Query subform". That all works fine and the query modifies based on the text entered every time the button is pressed. The next stage is that when the subform is loaded I want the user to be able to select a line from the subform and to jump to that record in another form (which also needs to be opened from that selection). The reference for the record to select in the newly opened form would be the first column of the selected line highlighted in the subform (control name "KZ NUMBER").
View 10 Replies View RelatedI have a query on a form that is providing all of the information I need for everything on my form.
The problem is I don't know how to refer to a field's value in the query in VBA without having a hidden text field on the form.
I know I can reference a combo box's query to include criteria such as [Forms]![cboSelectStudent] if the control is actually on the form, but how would I refer to a value in the form's query that doesn't have a control on the form.
I've been searching for everything I can think to call this but haven't been able to come up with anything.
Thanks.