Currently I have a Tabular view List (of text boxes) populated from a query.
What I am looking for is a way to refresh the list. I presumed me.refresh, me.requery or me.repaint would work, but it doesn't.
If I open, then close the list it refreshes. So presumably I could close then open form for an update, but that is crude and there must be a way to do it properly?
The user navigates between two windows (client list *name and age*) and (Client info *in depth info and history*) they click on a record in the list and are taken to (client info) whereupon they can edit or add a new record. The records that are updated do so without a hitch, however the new records do not update in the list.
I have a form with a list box where you can add new names, and a bombi box that lits current names already in use. I want the form to update the combi with the name just typed in the list box. I guess I use OnExit event, but I don't know the code I should use for updating the combi list..
Essentially I have a form_A with several tab's and then one list control box in each of those tabs. At present if you double click on any item within the control boxes your taken to another form_B with info about that item and when you close that from down again if refreshes form_A.
Is it possible to only refresh the specific list control box that is active instead of refreshing the whole form ?
I have a form called Add New Delegation, i have combo box of Institution names on the main form and a subform for Agreements discussed. with a combo box called agreements. I successfully cascaded the combo boxes so that the agreements discussed on the subform are filtered by their respective institutions on the main form. However i am unable to refresh the list each time a new institution is selected as the Macro will not allow me to requery a control on the mainform from the subform..
:confused: I have a listbox which using "Table/Query" RowSourceType lists all records in table of Access 2003. The Add Record button clicked, a new record will be inserted to table, and then requery listbox. But it's so strange, the record already existed in table, but listbox still doesn't refresh after requery, I have to presss F9 several times to refresh manually. The update record button clicked, the listbox doesn't refresh too, but when I check the value of the row, the value is new value, but ths listbox on screen shows old value. for deleting, has the same problem.
So I'm not sure, if this is a bug of Access, or I missed something have to do. I already tried many way to solve this problem (sleeping, check if updated listbox, etc), all of them aren't work well.
Please give me a help!!!
Michael
I have a listbox which using "Table/Query" RowSourceType lists all records in table of Access 2003. The Add Record button clicked, a new record will be inserted to table, and then listbox will be requery to show updated table. But it's so strange, the record already existed in table, but listbox still doesn't refresh after requery, I have to presss F9 several times to refresh manually. The update record button clicked, the listbox doesn't refresh too, but when I check the value of the row, the value is new value, but ths listbox on screen shows old value. for deleting, has the same problem.
So I'm not sure, if this is a bug of Access, or I missed something have to do. I already tried many way to solve this problem (sleeping, check if updated listbox, etc), all of them aren't work well.
Please give me a help!!!
Michael
I did it, but it didn't work. Ever I looped 10 times.
you could try requerying the list box on the onclick event of the Add record Button
listboxname.Requery
I did it, but it didn't work. Ever I looped 10 times.
you could try requerying the list box on the onclick event of the Add record Button
listboxname.Requery
Thanks for you help. My code is
With Me.lstISG .RowSourceType = "Table/Query" .RowSource = "SELECT * FROM InternalServiceGoal WHERE Year='" & Trim(lstYear.Value) & "' ORDER BY Year, Department, Service_Category, Service_Category_Details, Objective, Measure;" .Requery .SetFocus .ListIndex = -1 End With
Add button and ListBox on same Form. Add button captures text fileds and insert a record to database, ListBox just display all the records after click Add/Update/Delete button. All of three buttons clicked, the ListBox (lstISG) will be requery. but it doesn't work, I have to presss F9 several times to refresh the Form.
I have a combo box in which it's value changes according to user input. It is working but it is annoying to have to click the combo box for it's list to refresh. How to make it seemless?
I found 2 examples of code to refresh my attached table link to sharepoint lists.
I have a scheduled task open my Access 2010 db and an autoexec macro runs and closes the db.
My problem is my tables disconnect from sharepoint 2010 and the update fails.
I added the code I found to a module and added a line in my macro to run the code. Now I cannot get the code to work.
Am I at least on the right track? I just want to know before I spend many hours getting this code to work.
These are the two locations of code I found.
[URL]
I think part of my problem is that I have a regular table that I add a txt file to that is not linked to sharepoint so I need to exclude it from the code.
I apologize if this has probably been asked countless times; however, in my search of this forum I could not find something that seemed to work for something so simple.
I have 2 forms. The first form is my main form and the second form is my "popup" form. Both of these forms access the same table. In my main form I have it so people can not enter in a ID so it reduces accidental data entry. Therefore, I created a "popup" box that allows ID entry.
Everything works great except when I close out of the popup form, the newly entered data is not available unless I close the main form and reopen.
Million Dollar Question:
How do I refresh or requery (dunno the correct term usage here) the main form to reflect the addition I made in my popup form. I would like the refresh event to happen when I click the close button on my popup form.
I have approximately 20 people using a shared database form. When someone updates a form creating a new record I want everyone to be able to see that new form record without having to close the form down and reopening it. Each form is given a form number by autonumber.
I wrote some procedures which handles each a seperate unit. When a procedure finishes, I want to write an entry to listbox 'lbLogbook' so the users sees what's happening. But the entries in the listbox only appears when all the procedures are finished. When I go into break-mode and go step-by-step then I see the listbox filling up. Do I have to manually refresh the form or so?
I have a form (f1)which has 2 sub forms. this form is getting called from another form(f2). When f1 gets loaded , its subforms will have a set of data, and when i want another set of data to be visible or refreshed it is not happening on the subforms.
we have tried.
form.refresh form.requery
and also f1!subform.form.refresh & f1!subform.form.requery.
What is it that is not allowing to refresh the data on the subforms.
I have a main form where information for a particular part number or job is entered. Should the part number not yet exist, Access will let you know. I have a button within the main form that opens up the Form_EnterPartNumber form which allows you to enter the new part number.
What I would hope to be able to do would be to refresh (requery?) the main form after creating a new part number and closing the Form_EnterPartNumber form..........but, keep the main form on the current record instead of resetting back to record number 1.
I have a sub form and a button on the main form that needs to be pressed to refresh the data in the main form after data has been entered into the sub form.
Is it possible to have the main form refresh on exit from the sub form field automatically without having to press the button??
Could i hide the button and run a bit of code that runs the refresh button on the main form on exit from the subform field?
I have a form with linked fields. If I keep this form open and I input the data in the linked table using another method, but not the form, the form is not refreshed. I would like to add a button to the form that refresh the form with the new data, but I dont` know any functions or VBA code that can do that. How can I solve this problem? There exisist any refresh form function/method in VBA?
Hi, I have one main form, inside it there are 5 pages, is there any code I can use so that when I go between pages the data is refreshed. e.g. I have a "fault" page where I log a call, then an "open calls" page where the calls go, however I have to close the form and reopen it for the data to appear!
After a refresh of the sub form, I want to go back to the last record edited. This might be a record not fitting on the top of the screen, let's say record no. 2000. After the refresh the sub form shows the first records, and you need to scroll down. How to solve this?
HI basically i have a form which dislays records in a continous list, then an add button which adds records to the list. to view the newly added records you have to close the form and open it again.
I have inserted a refresh button but what im after instead is when i close the 'add form' it refreshes the list form. Below is the code for the refresh button could someone tell me what i need to add/change to make it refresh a particular form on close?
Private Sub Command45_Click() On Error GoTo Err_Command45_Click
I have a query that picks up 2 dates from 2 fields in a form. If I change the values of the fields the Query picks up the old values. I have tried Requery and saving the Form programatically prior to running the Query, but the only way I can get the Query to use the latest field values is by closing the DB completely and then opening again.
I just realized why I wanted to stop using Access long ago...anyway here's my problem.
I have two tables: table1 and table2 (I know,creative). Anyway, table1 is linked from another database, table2 is local to the open database. I use table2 as a temporary table to hold data from table1. table1 is then set as the datasource of one of my forms.
I have a button which is used to refresh the data. Basically, it deletes everything in the temp table (table2) and inserts data from the linked table (table1). When I do this, the rows in my form then all contain #Deleted, but it never refreshes with the new data after I have inserted it.
I've tried using the Refresh, Requery and even Repaint methods. Still no luck. Then, I clicked Remove Filter from the toolbar and the new data appeared, but I don't have any filters in place. So then I tried to do this programmatically by setting the subform (I'm using subforms ) Filter = "", its FilterOn to False and its OrderBy = "".
I have a refresh button next to a box in my form. I would like to make it so that when someone clicks another field or out of the key box it will refresh the form automatically because that box makes other fields autopopulate and the way I have it set up thus far is that you half to refresh the form somehow to get that date to come over.
I'm trying to use a PivotTable Form (in Access), in order to automate a process (previously data was exported to Excel and the pivot table was created manually). I've got my pivot table form working fine but I need to provide the user with a way to refresh the Pivot table - i.e. re-run the underlying query.
In Access Help it says to select design view and then click the Refresh button (the one with the big red '!' icon). This does work and the data is updated but it's not a user friendly option.
Opening the form doesn't automatically refresh the pivot either, so does anyone know a way I can provide a button with VBA code or whatever to manually update the pivot so it reflects changes in the underlying data?
I have a form that's using a query as a record source. Normally that query is empty, as it's just linked to a temporary table, so when I open the form, generally I'm on record 1 of 1.
On that form is a button that imports data from a text file. I want to find a way to refresh the data on the form after importing, so that it shows the new records without having to close and reopen the form. So where I was on record 1 of 1 before importing, I want it to show that I'm on record 1 of 25.
I have an close button on a form that is supposed to Refresh the subform of a different form and then close the form with the close button.
frmOperations - no refresh / requery subfrmPlants - Needs to be refreshed / requeried
frmPlants - Needs to be closed
Currently the button effectively closes frmPlants, but it's failing to refresh the data on my subform to display any changes that have been made on frmPlants. I've tried with refresh and requery, neither seem to work.
Code:
Private Sub lblClose_Click() If CurrentProject.AllForms("frmOperations").IsLoaded Then Forms!frmOperations!subfrmPlants.Form.Refresh End If
DoCmd.Close acForm, "frmPlants", acSavePrompt End Sub
I have combo box that lists data from another form (frmCity) . If the required data in not in the list then frmCity is opened, a new record is entered and form closed. The combo box in the first form (which has remained open) does not show the new entry unless it is closed and re-opened. How can I get the new record to show without closing and reopening?
