Report Of Current Record
Jan 5, 2006
I have got a tricky problem, for which I can find no answer - but then I am a bit of a novice here.
I have created a (probably too-) complicated relational database but what I really need is to be able to make abutton on the page of my address book form, so that when I hit it it creates a report of an address label for that current record on the screen only.
I hope this makes sense. If this is possible, I then need to extrapolate this technique to print a report of a subform (of samples sent) of a current client record.
All help gratefully received
Xenia
View Replies
ADVERTISEMENT
Jul 19, 2007
Hi Everyone,
I'm probably going about this the wrong way all together, but what I'm trying to do is print a single record from a form in a report.
Basically after the client fills in the form they can print their "results report" using the click box (command button) in the bottom corner of the form. When the client clicks on the button it prints all the records ("result reports") of all the clients...no good of course.
Here's the code for the button:
Private Sub PrintSingleChamber_Click()
On Error GoTo Err_PrintSingleChamber_Click
Dim stDocName As String
stDocName = "SingleChamberPrintOut"
DoCmd.OpenReport stDocName, acNormal
Exit_PrintSingleChamber_Click:
Exit Sub
Err_PrintSingleChamber_Click:
MsgBox Err.Description
Resume Exit_PrintSingleChamber_Click
End Sub
Can someone point me in the right direction? :confused:
Thanks again,
Mark
View 1 Replies
View Related
Aug 20, 2007
I have a report that is tied to a table. On my table form I have a button that prints the report. Is there a way to only print the report for the current record showing on my form?
View 1 Replies
View Related
May 20, 2005
I'm having hard trouble doing print preview current record from form with subform to a report.
When using the code below I'm getting an error for:
The specified field [PolicyNum] could refer to more than 1 table listed in the from clause of your sql statement.
Dim strDocName As String
Dim strLinkCriteria As String
strDocName = "rptCurrentInfo"
strLinkCriteria = "[PolicyNum] = Forms![frmAdjusterMod]![PolicyNum]"
DoCmd.OpenReport strDocName, acViewPreview, , strLinkCriteria
Command button is in the main form frmadjustermod - sbfm is sbfmMoreMod
foreign key is PolicyNum
Thanks,
Michael
View 3 Replies
View Related
Apr 19, 2006
I have a report which shows all the records in my database. I have a command button on my form which brings up that report for preview.
How can I get the button to bring up that report showing only the current record being viewed on the form?
Do I need a separate report and what criteria/VB code is required?
View 1 Replies
View Related
Apr 17, 2014
I make a print button on the form and want printing current record to the report, but every time I can not do that.
View 1 Replies
View Related
Dec 23, 2011
Private Sub Command30_Click()
DoCmd.RunCommand acCmdSaveRecord
Dim strDocName As String
Dim strWhere As String
strDocName = "Civil Process"
strWhere = "[FormID]=" & Me!FormID
DoCmd.OpenReport strDocName, acPreview, , strWhere
DoCmd.RunCommand acCmdPrint
End Sub
I can get this code to print only one record but then the button will always print this record. It will not change and print the current record.
FormID is an autonumber to give each record it own id.
View 2 Replies
View Related
Sep 21, 2005
Help needed again please
I have managed to link a report to a form where you can double click on the surname and the report opens automatically BUT I want the report to only show the data from the record that I have double clicked - at teh moment the report is coming up with thousands of pages - one for each record.
Can anyone help me with this - I think it's probably something simple but I can't work it out on my own :eek:
View 14 Replies
View Related
Nov 23, 2006
Hi All,
Having a problem with a report, I have a form that i use to enter a new record to my database, what I want to do is put a button at the bottom of the form to print the record (via a report)
If I base this on a record that already exists, it works fine.
However,
If I have just entered the record the query the report runs off doesn't see the new record. To print that record I have to exit the completed record, then go back in to it and print.
My aim is to remove this additional part of the process, I'm sure it's something really simple, but can anyone help?
Many Thanks
Paul
View 2 Replies
View Related
Nov 17, 2004
Is there a way to configure a report to only show
the data from the current record I choose on my form?
Thanks in advance.
View 1 Replies
View Related
Aug 25, 2015
Report says 'No Current Record' when viewing with print preview, even though it works fine in report view?What did I do?
View 10 Replies
View Related
Aug 14, 2006
hi
i have 3 queries brought together in 1 form. i do not want a report to be printed out just the current record in form view. this is because i have a number of images per record.
if i print out the current record and it only has 1 photo in a sub-form attached to the main form record, then the main form will print on 1 page which is what i want [screenshot 1]. But if there are 2 or more photos attached to the main record then the print command button prints out 2 pages for 2 photos, 3 pages for 3 photos and so on [screenshot 2].
any ideas as to how to limit the print command button to print out only 1 page per record regardless of how many photos their are attached to each record??
thanks
View 1 Replies
View Related
May 9, 2014
I have a report that shows weekly schedules (each week start with Sunday date for the row) for multiple teams (columns). It prints 1 year at a time.I have to add the Sunday dates by hand into the table for each year. I have added 2016 but when I generate the report I get a "no current record" error.By the way, I am not a "programmer" but I can usually figure out whats going on when we have a problem by looking at other code in the system and by finding answers for similar problems on the forum!!
View 1 Replies
View Related
Mar 21, 2013
I have a DB in Access 2007 which I'm having trouble with. I have a form, "Sub_Det_Frm", on which I would like to place a button to print the current record, (Primary Key is an autonumber "Employee Number") to a report "Sub_DetForm_Rpt".
I've used the instructions from, oops I can't show you the link! It's h(double t)p(colon)//allenbrowne(dot)com/casu-15(dot)html but I'm getting this error:
The expression On Click you entered as the property setting produced the following error: A problem occurred while Employee Details was communicating with the OLE server or ActiveX Control.
This error occurs when an event has failed to run because Microsoft Office Access cannot evaluate the location of the logic for the event. For example, if the OnOpen property of a form is set to =[Field], this error occurs because Access expects a macro or event name to run when the event is fired.
View 14 Replies
View Related
Aug 31, 2014
I have a form that when a user fills out the information and select a submit button. It brings up that record in reports in print preview for them to print. The issue i am having when the user enter the information, the report does not show any data until i refresh it. I tried include me.refresh,etc. No luck. I attached the code to make things simpler.
Private Sub Form_BeforeUpdate(Cancel As Integer)
If Me.Dirty Then
If MsgBox("Do you want to Submit this Contract Form? Clicking No will DELETE ALL ENTERIES,and Log You Off", vbYesNo, "CONTRACT FORM") = vbNo Then
Me.Undo
Cancel = True
Else
If MsgBox("PRINT FORM", vbOKOnly, "CONTRACT PRINT") = vbOK Then
DoCmd.OpenReport "rpt_Contracts_Main", acViewReport, , "[CONTRACT_ID]=" & Me!CONTRACT_ID
End If
End If
End If
End Sub
The reports comes up, but i have to manually refresh it to show the data that was enter.
View 7 Replies
View Related
Jan 25, 2014
I have VBA code for a Print Preview button on the main form that previews the current record in a separate Report using this code:
Code:
Private Sub cmdPrintRecord_Click()
Dim strWhere As String
If Me.Dirty Then 'Save any edits.
Me.Dirty = False
End If
[code]....
I use this Print Preview code on a Button in the Form Header. The Main form lists head of household information. I also have a tabbed control with three tabs that have SubForms for Address, Children and Contact details. The problem I have is that if any of the subforms are left blank I get a Run-Time Error '3021': No Current Record. If I Debug (press the button), it takes me straight to this line:
Code:
varAge = DateDiff("yyyy", varBirthDate, Now)
highlighted in Yellow.Anyone on my database must have an address, should have contact details and could have children. If any one of these is blank then the print preview will not work.I would like to know how to stop this error happening for blank records in my subforms.
View 11 Replies
View Related
Oct 2, 2013
I have been an MS Excel man all along my career and I am a novice in MS Access.I have created a table, [Initial Customer Approval] which records data from a Form, [Initial Customer Approval]. Once the data is entered in the Form, I need to do some calculations based on the data entered in some of the fields in the form.I created 6 different queries for the six possible values in those fields. now for each of those queries I created respective reports.I placed a Print command button in the Form.
1. When I press the Print button it should open the report for the current record in the Form. (Currently It Opens all the reports simulatneously, with only one relevant report containing the current record; other opened reports being blank.)
2. If user presses the Print button before pressing Save button then system should prompt user.
Here is the code (Please note [reference number] is the unique ID generated for each record entered in the tabe through form):
Private bSaveClicked As Boolean
Private Sub Form_BeforeUpdate(Cancel As Integer)
If Not bSaveClicked Then
MsgBox "You are trying to navigate away from the active record. Please either save your changes, or press ESC to cancel your changes.", vbOKOnly + vbInformation
Cancel = True
[code]...
View 5 Replies
View Related
Nov 16, 2014
The aim of what I am doing is to create a monthly statement to give to our intermediaries that shows the commission they will receive each month for the deals they have referred. I have managed to create this report, HOWEVER I can't figure out how to filter out which month I need, so I a report for Jan, Feb Mar etc... The idea is that at the end of each month I need to run the report so only the latest month shows...
View 3 Replies
View Related
Apr 30, 2007
I need a way to dynamically store a particular value in "field_2" of the CURRENT record depending on whether or not the value of "field_1" of the CURRENT record is identical to the value of "field_1" of the PREVIOUS record within the same table. The table is sorted on "field_1".
So, if the value of "field_1" in the CURRENT record is "ABC" and the value of "field_1" in the PREVIOUS record is also "ABC", then store a value of "PPP" in "field_2" of the current record. IF on the other hand, the value of "field_1" in the CURRENT record is "ABC" and the value of "field_1" in the PREVIOUS record is "XYZ", then store a value of "WWW" in "field_2" of the current record.
I have a report that will use these results to count only the number of records that have a "WWW" in "field_2".
Is this doable, maybe in a query somehow?
I should add that whatever the solution, it needs to be compatible with Access 2000.
View 1 Replies
View Related
Aug 19, 2013
I have two forms both with separate tables
(1) Register and
(2) Payments.
One of the common denominators between them is the URN which is auto-populated as it is an auto number field. My issue is that when I want to add a new record to the payments table using the forms (I can get to the payments form via the register form), I want to be able to identify the record that I am currently viewing within the register and auto populate the URN field with the same number. This is what I have done so far,
Option Compare Database
Option Explicit
Private Sub AttachPaymentDetails()
Call PerformInsert("tblFinancialBudget", "frmFinancialBudget")
End Sub
[code]....
View 5 Replies
View Related
May 6, 2015
I'm trying to make a form that shows what the last record was next to the empty space where you enter a new record.
This is so the user knows that what they are entering is roughly in line with what has come before.
So for example if I was recording temperature every May, I would like a form that has a field called temperature and next to that field I would like to see last year's temperature.
Records:
Date | Temp
2014 | 20.5
2013 | 18.5
2012 | 19.0
2011 | 22.7
2010 | 15.2
So when I enter the record for 2015 I have a box that says: Temp and next to that box is "Last year was 20.5" or something like that.
View 2 Replies
View Related
Aug 8, 2014
I'm struggling with a query to evaluate current and prior record data. I have a query producing 5000 records. I need to group records by Case ID and compare current date record to previous date record to determine if a team and worker name has changed during the year. I need to count how many times a cases is transferred to and out of a particular team from the beggining of the year. i.e., On 1/1/2014-Team1 has an inventory of 500 cases.
During the month 25 cases are transferred into Team1 and 15 cases are transferred out of Team1. So on 2/1/2014 Team1 begins with an inventory of 510 cases. Throughout the year cases come and go from and to Team1 each month so need to figure out how to create a query to count each change. See attachment displaying how the data is listed and how I invision it to work with the In/out column counts.
Specifically, at the begginig of the year (1/1/14) for case ID 1003 you can see it belongs to Mary in Team1 for January and February. Then in March the case is transferred out and went to Joe in Team 3. So for Mary a "-1" is recorded as a negative count for that Case ID. If later in the year the case is transferred back to Mary a "+1" would be recorded. Respectively evaluated for each of the 5000 records to get a total count for each of the teams by Case ID throughout the year.
I've started with DLookup, tried comparing current month to previous month using DMax. It works as long as I only select one case ID used in a separate query but if I use the whole subset (5000 records) it fails. I can't figure out how to group each set of case IDs and then apply the query.
My attempted query: DLookUp("[Team]","[Team_qry]","[Team_qry]![Date]=#" & CStr(DMax("[Date]","[Team_qry]","[Team_qry]![Date] <#" & CStr([Date]) & "#")) & "#")
View 3 Replies
View Related
Sep 15, 2005
In my query, i want to automatically display the value of another field from the previous record in a field in my current record. i.e.
Name Value Previous
Record 1 1
Record 2 2 1
Record 3 7 2
Record 4 1 7
Is it possible to create some kind of simple expression to refer to data in another record?
Cheers,
Ben
View 6 Replies
View Related
Apr 14, 2007
I need to write a query which populates an empty field in the current record with information from a specific field in the next sequential record. Any ideas?:confused:
View 3 Replies
View Related
May 1, 2013
I have a query to bring in values, I need to select 2 rows of data but the criteria is as such:
x= starting value on form
now the row of data must match the following criteria previous row to current row(ref temp)<=x And Current row(ref temp)>xnext row to current row(ref temp)>=x And Current row(ref temp)<x
I have dealt with SQL before but how to do the above.The isolated 2 rows of data will then go into unbound boxes on a form from which I will do intercept and gradient calculations.
View 5 Replies
View Related
Sep 5, 2006
Hi all,
Another problem bothering me. Wish someone can help me to solve it. I am doing the 'Edit' Option right now ... As a user friendly propuse, I had try to use a combo box to let user to choose my employee record with all the detail on but the problem is the program 'JUST' list the record they can not go to the current record!! When i try to edit my record, the program is not allow (for sure because they can't have a duplicate record on it). The reason is because the record just stay in the FIRST record but can not go to the current record. I do believe is the problem of i using the way of listing the record as below:
Me.EmployeeName = Me.EmployeeName.Column(0)
Me.IC = Me.EmployeeName.Column(1)
Me.Nationality = Me.EmployeeName.Column(2)
Me.Race = Me.EmployeeName.Column(3)
Me.Sex = Me.EmployeeName.Column(4)
Me.FMU = Me.EmployeeName.Column(5)
Me.Position = Me.EmployeeName.Column(6)
Me.SectionField = Me.EmployeeName.Column(7)
Me.DOEmploment = Me.EmployeeName.Column(8)
Me.DOResign = Me.EmployeeName.Column(9)
Me.Remarks = Me.EmployeeName.Column(10)
So, Could someone help me to solve it like when i can use the combo box to select the Employee record with the details are on as the same time can go to current record... Thanks alot!!!
i do have the confident if i can go to the current record then my edit option can be working properly.
P/S: I had attach the picture... showing my program problem (with the red circle)
View 8 Replies
View Related