Rounding Duration To An Increment Of 15
Mar 13, 2008
Hi all,
I am trying to get the formula to round to 15 seconds to charge rating events.:confused:
so 76 seconds will calculate up to 90 seconds..
& 91 will be 105 seconds.. and so on.
Any help greatly appreciated.
Thanks Dean
View Replies
ADVERTISEMENT
Jul 10, 2007
Hi to all,
I have a table of daily_outs with two columns date_out and date_in and below are my sample:
Table:daily_outs
line________date_out______________date_in_________ ___ duration(minutes)
1______#12/25/2006 12:26 PM#___#12/27/2006 13:26 PM#_____2,940.03
2______#12/26/2006 04:33 AM#___#12/27/2006 12:26 PM#_____1,913.00
3______#12/26/2006 01:16 AM#___#12/26/2006 15:25 PM#______849.03
4______#12/25/2006 01:05 AM#___#12/28/2006 15:27 PM#_____5,182.22
I would like to query the date_out=12/26/2006 00:00 AM and date_in=12/26/2006 11:59 PM. Below are the result I would like.
line________date_out______________date_in_________ ___ duration(minutes)
1______#12/26/2006 00:00 AM#___#12/26/2006 23:59 PM#_____1,439.98
2______#12/26/2006 04:33 AM#___#12/26/2006 23:59 PM#_____1,166.00
3______#12/26/2006 01:16 AM#___#12/26/2006 15:25 PM#______849.03
4______#12/26/2006 00:00 AM#___#12/26/2006 23:59 PM#_____1,439.98
Can anyone help me on this?
Thanks,
Corbitext
View 8 Replies
View Related
Mar 23, 2005
I have an import source that gives me lots of fields containing duration in format hh:mm:ss
This is a comma delimited txt file with headings and imports just fine, but I (thought) that i had to import the duration fields as text types....
Now, what can i do with that? I need to calculate (sum, average) on these fields, but can't. It seems a bit daunting (and stupid) to try and split these into separate hour, min and sec fields and use TimeSerial to put them back together. Do i have other choices?
It is not too late to import as a different format but here is a couple of lines of the source file:
Login ID,Date,ACD Calls,Avg ACD Time,Avg ACW Time,Extn In Calls,Avg Extn In Time,Extn Out Calls,Avg Extn Out Time,ACD Time,ACW Time,Agent Ring Time,Other Time,AUX Time,Avail Time,Staffed Time,PC Agent Occupancy w ACW,PC Agent Occupancy wo ACW
OrderCalls,01/01/2005,0,0,0,0,0,0,0,:00:00,:00:00,:00:00,:00:00,24: 00:00,:00:00,24:00:00,0,0
as you can see, leading zeroes are dropped.....
please help!
View 4 Replies
View Related
Jun 26, 2005
I have a form with three fields:
CallStart
CallEnd
Cost
When a call is logged, I have it set that the time is entered automatically viz =now(). I would like it where if the cost = £20.00 the call end would be automatucally 30mins ahead. If the cost = £40.00 then the call end would be 1 hour ahead. And if the call costs £10.00 then the call end would be 15mins ahead.
Any help would be appreciated.
View 2 Replies
View Related
Nov 10, 2004
HI! I am a university student taking a computer science course. I have created a database with multiple doctors and patients. Within the patients’ visits table I have included the two fields [Time Entered] and [Time Left] with values entered in these fields, for example, of 2:50:00PM and 3:30:00PM respectively. Within a query I am asked to calculate visit’s duration using MS Access Minute function. The expression I tried to use as a calculated field was:
Duration: (((hour ([Time Left])-hour ([Time Entered]) * 60) + (minute ([Time Left])-minute ([Time Entered])))
However, when I tried to run the query using this expression, an error message displayed which read “The expression you entered is missing a closing parenthesis, bracket (]), or vertical bar (|)”.
A fellow student told me to delete the first parenthesis and run the query again. I did this and the query did run, but returned vales of –820, -802, -455, etc for the duration of each patient’s visit. Can anyone please help me with the correct calculation??????
Marcella
View 2 Replies
View Related
Oct 5, 2005
is it possible to count the time between records? example
Table set up:
LogID
StartTime
StopTime
ProblemCode
Example records:
Id -------> StartTime ------> StopTime--------> ProblemCode
1 -------->06/10/05 10:00 -> 06/10/05 10:02 -> A101
2 -------->06/10/05 11:00 -> 06/10/05 11:02 -> A131
i want to count the time elapsed between, ID 1 ending and ID 2 starting, can ido this?
if so how..
the duration i am looking for in this case would be 58 mins
cheers
Andy
View 2 Replies
View Related
Apr 15, 2012
what is the best way to record durations, not time?I want to have a table that records charging data such as below:
startDate
startTime
Duration
(hh:mm:ss)
15/04/2012
12:00:00
13:00:00
In this example you can see we started charging the device at 12pm on 15/04/2012 for 13 hours, from this I will be working out the endDate/time using dateAdd etc.Do I set the duration field up as a dateTime and if so how do I avoid the DB thinking that the field is a time and not a duration, meaning that the endDate would be 1pm on the 15/04/2012 instead of the correct 1am on the 16/04/2012?
View 6 Replies
View Related
Jun 20, 2007
I hv a access mdb which contains one column as "duration", data format as hh:mm:ss, e.g. 00:02:20 - 2 mins 20secs.
How could I calulate the average of the duration?
like sum of all duration fields / the ttl no of records.
View 1 Replies
View Related
Dec 22, 2014
I want to calculate decimal hours duration taken for a job starting before and finishing after midnight.
I have something that works but it seems cumbersome.
Hour(Format([Job]![Start_time]-1-[Job]![Finish_Time],"Short Time"))
+ (Minute(Format([Job]![Start_time]-1-[Job]![Finish_Time],"Short Time"))/60)
View 11 Replies
View Related
Nov 19, 2013
I developed a finance tracker database for tracking project revenues and costs (forecast and actual amounts). I have a form where we enter a new Work Order in the DB. This Work Order form has a continous subform where we create all the billing periods needed for the life of the Work Order. Once the billing periods are created (opened) we can then add our revenue and cost forecasts for each period. We have a Billing Period lookup table that has our billing periods with their respective start and end dates (which usually begin around the last week of a month and end about 3 weeks into the next month).
For the purpose of this question, lets say we only enter the required WO_Number and WBS_Code (Composite key) and the Work Order Start_Date and End_Date. I want to click a button to runs some code to automatically create all the billing periods for which their start and end dates fall into the Work Order start and end dates.
For example, say a Work Order starts on 5/1/2013 and ends on 7/31/2013
The billing period dates in the Billing Periods lookup table are as follows:
May-13 ---> 4/22/2013 - 5/19/2013
Jun-13 ---> 5/20/2013 - 6/23/2013
Jul-13 ---> 6/24/2013 - 7/21/2013
Aug-13 ---> 7/22/2013 - 8/18/2013
Then we would need the following billing periods created in the Work Order subform:
May-13
Jun-13
Jul-13
Aug-13
I don't even know where to start on this. Is it possible to automate this process with the setup I have? If so, how would I structure the VBA code/logic to use the billing period lookup table and create entries in the subform for all the billing periods that fall into the duration of the Work Order.
The attached DB is a stripped down version with only the tables and forms needed for this problem.
View 2 Replies
View Related
Aug 30, 2014
I am creating an access database for the results of my triathlon times and I am having trouble with the race results. Based on some information I found here, I am using number fields for the swim, bike and run times because I want to do calculations and also sort them and it doesn't sort properly if they are text.I have created separate fields for the hours, minutes and seconds for each of them.
Now I am trying to make a calculated field to convert the numbers to the following..For a swim time, I want to convert it to the time per 100m. I have the calculation for that, but the result gives me the decimal portion and not the actual seconds portion and I am stuck. Here is what I have so far :
Sw100m: (([SwMin]+([SwSec]/60)+[SwHr]/60)*100/750)
So as you can see I have added up all the number to get the total number of minutes and then converted to the minutes per 100m (the race is 750m). And the result gives me 3.31. But the .31 is a decimal and I want to have seconds which is 18 seconds. I know how to do the calculation on paper but I don't know how to change my formula to fix this. On paper I have to multiply .31 x 60. But how do I refer to the decimal portion of the number and modify my formula? how to input race times as duration in an access database.
View 11 Replies
View Related
Dec 20, 2013
I am trying to figure out how to take a table of timestamps and activity duration and break it into intervals, where it groups the duration into the time spent in each 15 minute interval. I have included a sample of the data and output. Is there any way to pull this in Access (or SQL)?
Raw Data
EmployeeActivityTimeStampStartTimeStampEndTotalDuration
Doe,JohnSomeActivity12/16/13 9:06:02 AM12/16/13 9:57:14 AM0:51:12
Smith,JaneOtherActivity12/16/13 9:22:15 AM12/16/13 10:06:55 AM0:44:40
Query to break out the total duration time in to the 15 minute interval it fell into
EmployeeActivityIntervalIntervalDuration
Doe,JohnSomeActivity12/16/13 9:00:00 AM0:08:58
Doe,JohnSomeActivity12/16/13 9:15:00 AM0:15:00
Doe,JohnSomeActivity12/16/13 9:30:00 AM0:15:00
Doe,JohnSomeActivity12/16/13 9:45:00 AM0:12:14
Smith,JaneOtherActivity12/16/13 9:15:00 AM0:07:45
Smith,JaneOtherActivity12/16/13 9:30:00 AM0:15:00
Smith,JaneOtherActivity12/16/13 9:45:00 AM0:15:00
Smith,JaneOtherActivity12/16/13 10:00:00 AM0:06:55
View 2 Replies
View Related
Apr 13, 2014
I am building a database to enter staff phone statistics. As an example my fields would be - Name, Date, Staffed time, Available time, Aux time and then calculated fields to show the percentage of time i.e %Aux, %Available etc.
My problem is the formatting of the times entered as they are duration not time. Say staffed time is entered as 08:00:00 for 8 hours and Aux time 03:57:21. The only format I can see to suit is date time but then Access takes these entries as 8am and 3:57am is there a way to change this to work as duration hh:mm:ss?
View 6 Replies
View Related
Apr 7, 2015
I'm new in access I working on DB for my company equipment
I used tables and queries and reached to the following query
Query name (02-By Project)
KSC_NO From_Project To_project Date_of_Trans
K-01-037 52500 12013 02/14/2014
K-01-037 12013 52500 03/31/2015
K-01-037 52500 12013 04/07/2015
K-01-129 52500 12013 03/03/2015
I want to make query to give me the following
KSC_NO IN_Date Out_date Duration (months)
K-01-037 02/14/2014 03/31/2015 13.6667
K-01-037 04/07/2015 Today 0.0333
K-01-037 03/03/2015 Today 1.2
Is that possible?
View 5 Replies
View Related
Mar 23, 2008
Hi All
How to assign value to a field based on the value of the same field in the previous record?
Autonumber has its limitations for my purpose. Because, after I start filling up a form, I some times cancel the form filling process, and it affects the continuous numbering.
I guess the issue can be resolved by using some thing like record count facility. i.e. current' record's field value = number of records till previous record + 1.
How to exactly codify or execute the above by vba coding.
The Field Name is "SerialNo.", and Table Name is "StudentData"
Thanks
Padhuka
View 5 Replies
View Related
Sep 15, 2005
I have a database that has a few tables and in one of them (Originators), there is all the info about my loan originators including there comission level. I would like it when they turn in a certain amount of loans there commision level will increase. Is this posible? Here is my DB setup.
Tables:
Originators- 1 to many-
OriginatorID,FirstName,LastName,OrigSSN, Address,City,State,PostalCode,HomePhone,WorkPhone, CellPhone,FaxNumber,EmailName,BirthDate,Level(This is the commision level, and its in %).
Customers- 1 to many-CustomerID,FirstName,LastName,SSN,HomePhone,MobiPh one,FaxNumber,Address,City,State,Zip,Email,BirthDa te,CreditScore,SpouseFirst,SpouseLast,SpouceSSN,Sp ouceBirthDate,SpouceCreditScore,OriginatorID.
Loans- many to 1-
LoanID,LoanType,StartDate,EndDate,LoanLender,Custo merID.
Lenders- 1 to 1-
ID,LoanLender.
When a customer is added to the DB it is done with a form that has OriginatorID(which is autocreated), CustomerID(also auto) and some other of the customer stuff like phone numbers. When this happens I would like to have the originators % level increase, say after every 4 customers entered. Is it possible?
Thanks,
Scott
View 1 Replies
View Related
Jan 29, 2008
I am importing an Excel file with existing data using the Import wizard to build my table. It has an ID field (CID) which I would like to keep and set to auto increment starting with the next number.
Can this be done ?
View 2 Replies
View Related
Dec 30, 2005
Hi,
Need a little help with rounding up. In A2K I have a form with a textbox that displays a security deposit. Security deposit is calculated by rounding the payment to the next $25 increment, hence a payment of 324.53 should have a security deposity of $325.00, but a payment of $325.01 should have a security deposit of $350.00. The code I am using for a datasource for txtSecurity deposit usually works correctly, but for this payment ($324.53) it rounds to $350.00. Here is the code..
=(([txtPayment]25)*25+[txtSecDepRndTo])
txtSecDepRndTo holds the $25 incremental value.
Incidentally, if the payment is $324.49 my code rounds the Security Deposit to $325.00 as it should.
Any help would be greatly appreciated.
View 3 Replies
View Related
Oct 14, 2004
This is the problem. If I have a field that contains something like this:
GHP-K-0000D
How can I make the number portion (0000) increment by one when a check box is checked?
Thanks in advance
View 7 Replies
View Related
Feb 2, 2012
i have 2 field "CLIENT ID" and "CLIENT CODE". when i post a new record, i want the "CLIENT ID" and "CLIENT CODE" to merge to give me 1 field "CLIENT". the CLIENT CODE should be prompted for eg. THO or BLT and added to the CLIENT ID which will compose of 001 or 002. The CLIENT ID should also increment when each new CLIENT record is posted.
The example should make things clear.
CLIENT ID CLIENT CODE CLIENT
001 THO THO001
002 THO THO002
001 BLT BLT001
it should look up the last CLIENT value and then for the new record just continue on the previous entry.
View 9 Replies
View Related
Jan 8, 2007
In My Table I Want To Type A Number (4.2) But I Cant Get Access Not To Round That To (4.0) Any Suggestions
View 1 Replies
View Related
Feb 12, 2008
I am trying to write a query, it needs to multiply 2 numbers from separate columns, then, I need it to Round the value UP to the nearest 0.25? Does anyone know how to write this formula in a query?
View 1 Replies
View Related
Feb 9, 2005
I am having some problems with rounding numbers. I have a DB using forms and i want the user to enter a weight and it rounds to the nearest half KG, so either ?.5 or ?.0 depending on what the number is. I know i can enter a range check in the table validation or say => 5 AND <= 10 but i am stuck on the rounding validation. I think this must be enterd into the text box of the form but as to what the syntax would be i am lost.
Thanks
Chris
View 3 Replies
View Related
Jan 8, 2007
I Want To Type 4.2 And Access Is Rounding It To 4.0...ive Tried Changing The Format To General Or Fixed But I Cant Get Access Not To Round
View 3 Replies
View Related
Jul 23, 2005
Have the need to Round up to the next whole. If I have 1.2, I would like it to Round to 2. Is this possible? :
View 6 Replies
View Related
Dec 15, 2005
I want to round up to whole number based on U. the else needs to round up to the nearest cent. i.e. 1.64 rounds up to 1.65.
The first part works but I can figure out how round up the cents in the else part.
IIf([Item type]="U",+1*Int(+1*[Gross]*1.03),([Gross]*1.03)
Any help would be greatly appreciated.
Michael
View 10 Replies
View Related