I am new to access and am trying to setup a small database with names and phone number in it. I would like to be able to set up something to search the database for the names that I type in and display the records that have the same name. I have entered all the names in a table but cannot find any info on what I should do next. Thanks for any help you can offer.
View RepliesSubject: Searching all fields in a table
Hi, All,
I have to send an Access table consisting entirely of Text fields to another company for automatic list cleansing. My table MUST NOT CONTAIN even a single comma, else the whole procedure will go Iraq-shaped.
Therefore before sending the table, I must apply FIND to each field (column) to search for that one comma that may have slipped in.
So far I know only how to search one column at a time. Is there a way of searching the whole table for commas within Access, rather than first exporting the table to Excel?
Thanks for your help.
Adrian
I am trying to do a query that is set up like this:
I have a table with several fields which represents company vehicles. In each field, a persons name is inputed, unless no one is using the vehicle, in which then the field is blank. Each record represents one day, so the date is the primary key.
I am trying to make a query look at each field, and pull out one persons name, and show which vehicles that person will use over a date range. I have a form setup where you put in the date and the name you want ([Forms]![staff printing]![staff name]), and I am trying to tell the query to look at the form field and bring back only the results with that persons name.
Here is an SQL portion:
((Vehicles.[901 Morning])=[Forms]![staff printing]![staff name]) AND ((Vehicles.[901 Afternoon])=[Forms]![staff printing]![staff name]) AND ((Vehicles.[961 Morning])=[Forms]![staff printing]![staff name]) AND ((Vehicles.[961 Afternoon])=[Forms]![staff printing]![staff name]) AND ((Vehicles.[979 Morning])=[Forms]![staff printing]![staff name]) AND ((Vehicles.[979 Afternoon])=[Forms]![staff printing]![staff name])...
The date portion is working fine, which is why you do not see it here... it is only the portion where I try to pull the name for each vehicle that I have a problem.
I tried putting an "OR" where all the "AND"s are, but no luck.
Any thoughts?
(And let me know if I was not clear)
Clint
How can I get a PK in another table, based on searching for it based on 2 values. By searching with 2 values you will always get only 1 record.
READ BELOW FOR SITUATION
My Problem on my form:
The user enters 2 values, after entering the 2nd value a Unbound combo box runs a query, which searches for these 2 values (unique), that appear in a separate table.
These 2 values are unique toegether, but records in this separate table have another field, its Primary Key (AutoNumber), used to identfy the pair.
So back to this Unbound Combo Box that searched for the primary key of the 2 values entered. Now Only the Primary key can be selected from the combo, the value that I'm after.
But since there will only be 1 option (being unique), how can I have the PK value aready stored in an Unbound text box, as opposed to having options in a Combo box?
I have a parent table called patient info. and a child table called fills. The database in the future will become very large, and will be difficult to find a particular patient in the parent table to update fills in the child table. How can I search through the parent table using a form for easy access to a particular patient so that I can update fills?
Thanks for those who help!
Hi,
I have a form that runs a parameter query to search for university name and then displays 2 fields, university name and course name.
I am having difficulty with a search button that i have on the form called search_command; it is supposed to run the exact query as when you enter the form, it does this but displays the result in a dataheet, i want it to repopulate my 2 text label fields as mentioned above.
In addition i want then to be able to go to a specific record, select it and then press a button to append it to another table. i ahve not started this part yet
Can anyone please help ?
i am a beginner..
how i can write a code in a afunction that search
a record in a table according to some conditions
example:
i hv table employee that contains Title field which can have one of 3 values:Admin, Rep or Driver
i need to search the employee that has his type = admin
i can have one or more records that have this type...
so how to find first one, last one and all?
i have a form with a control for "repair type" and a subform that has a query that searches a table holding vehicle repair records. on the form the user can enter up to 5 repair types, [repair1], [repair2], etc.. Then the control on the form holds each type of repair to search by. Since the user could use one or all five repair fields and put repair types likes brakes in field one on one record and field 5 on another record, how do i search to just pull out those records that have the specified search criteria?
If i put in [form]![control] in each of the 5 criteria in the query it comes back with no records, because it it looking for that type in every repair field rather than once between the five fields?
I already have many table for each month , JanuaryT-DisemberT. I'm using simple form to key in data inside that table. Inside to that table (JanuaryT-DisemberT) have project number data i want to notice pop up when i try key in if that project number not valid..
example
JanuariT
Name -Project Cod- Validation
John -2012ABC - Not valid
Michel-2013WER-Valid
Mike-2014TERG-Valid
FebruariT
Name -Project Cod- Validation
Ann -2011AAA - Not valid
Sam-2012BCB-Valid
Tony-2013TEC-Valid
What i want to do is when i want to key in data in MacT using Form with ADD butoon, some notice will come out if .... for example : Daniel-2011AAA or Jony-2012ABC the notice will come out " THIS PROJECT COD NOT VALID, PLEASE CHOOSE ANOTHER COD". it something like notice to tell me that project cod already not valid yet. It look like "automatic searching" data for every table. It Is possible to do like this?
I have a database that I am creating for my work. I have a form that I am trying to get it to search the information from a table to pull the record on the form. I would like to search infomation such as employee id and wanting it to pull that information from the table.
View 7 Replies View RelatedI have an access form and there is a textbox in which i enter a string and have a search button so I need the onclick event procedure to search a string from my table. so how do i do it in access 2010.
View 7 Replies View RelatedI'm trying to search for a variable (varCod) in a table(SerialNumberCustomer) but I want to only store the returned variable in an array if its shipDate is between 9/30/2001 and 10/1/2012
this is what my code looks like so far:
Set rst = CurrentDb.OpenRecordset( _
"Select * from SerialNumberCustomer WHERE SerialCardId = " & varCod & " AND (ShipDate BETWEEN #09/30/2001# AND #10/01/2012#) ")
The line of code works and it returns all of the values in SerialCardId where it's = to varCode but it doesn't go through with the shipDate requirement. It's instead returning all of the dates with the found value.
I am looking to transfer a number of spreadsheets that I use to track IP Addresses to an Access Database, I have set up the tables and fields, what I would like to do is search for unused IP Addresses from populated table/fields.
View 2 Replies View RelatedHi, I have two questions which i dont think are two far apart, hence same thread.
First is, how do i make a search text box, that when i click a button searches for what is in that text box, rather than bringing up the find box. It is alright but it always compares it to what was last tabbed, or is the selected tab, and i want it always to compare to another textbox called company name.
secondly. I am often entering entries to the database with the same details. but a different name, how can i have it so that i enter say 4 or 5 names which starts 4 or 5 new records, but then places the rest of the details across all the new records.
THANKS
aLEX
Hi All,
I have a database which has 9,00,000 zip codes.... when i am searching for a particular zip code it's taking some time.... can anyone tell me how can i speed up the process.........
CoolNax
Hey all.
I have a database but want to create a Search function.
I want the search function to read a drop down box for a table name, then read two text box's for search criteria then search the table and displat results.
My knowledge of Microsoft Access is limited.
I think I have the theory behind it but not the know how for the coding.
So far I have been able to get it too look at the List Box for the table name then when I hit the search button ive set it to just open the table for now.
but cant get any further, any help would be greatly appreciated.
Thanks in advance.
Hi,
I have a command button (SEARCHING). I want to Press F12 as a function key instead of pressing on the command button. Any help pls...???????
Sysop470
I need some assistance in searching for a recorded by employee name with the click of a button. There could be more than one record for each employee name so i need a way that once the records are found they can be displayed to the user? ANY help is greatly apprieciated!!!!
THANKS
I want to run a query where I can enter two dates ( On on form ) and have a report show the results.
I know I can write the dates in the criteria field in a query, but I want to be able to enter the dates on a form and do it this way.
Please help, anything will help me, I hope. :confused:
Thanks
I have built a basic database to hold details on all my computer books and software as i hundereds of them.
I have built a table with text, number and memo fields which i want to be able to search.
What i would like is a form where you can enter details into various fields (eg Title, Author, a field to search all fields, etc) and then display the results in a table in the form below it. Then when the record is double-clicked it opens the record ina new form displaying more details.
Is there a way to do it as i have spent months trying to figure it out and trying to include the sample databases?
I have attached my database so any help will be appreciated.
Thanks,
Aden
Hi there
In my form every time i click on the search button a box pops out and asks me if i want to continue or accpet the change. the funny thing is i just search and nothing else.
thanks
i attached a screen shot to help
Hello, I'm trying to search an entry of a recordset with VBA
The entry can only be found by searching 3 field values. In my case the correct entry can only be found if the data in the field Date, No_Employe and No_Project all match the data of the entry I want.
Findnext doesn't work, it only access one field and I need three.
Seek doesn't work since it need to search a key, and neither Date, No_Employe or No_Project are keys.
How can I proceed ?
Should I use multiples Findnext ( how do I do that ? ) ?
EDIT :
Also please note that I'm searching for 400-500 entries in a row, so speed is an issue.
Hi All,
I have a small yet important question to ask. I have a text box on a form, that text box accepts a product number that the user wants to modify. I want to be able to do the following:
- If the product number does not exist, prompt with an error message (this part is not a problem).
- If the product number does exist, populate the text boxes on the form with the respective data. ex: Product number 512547. Does exist, hence: (TB = textbox)
Prd. No.TB = 512547
Rec'd Date.TB = 10/10/2006
Comments.TB= blah blah blah, etc.
I am simply trying to pull information from a table into text boxes on a form using a text box.
THANKS A MILLION!
In my Access DB, I have a field named ‘REFNO’. This contains reference numbers of some communications. I have a Combo Box to search records with this ‘REFNO.’ It so happened that there were two communications with the same REFNO. When I typed the wanted number in the Combo Box, only one record was displayed in the form which was not the one I wanted. I was able to see the other record by opening the table. Is there a way to display the next record with the same number in the form with the Combo Box? Grateful for help.
View 1 Replies View RelatedI have a parent table called patient info. and a child table called fills. The database in the future will become very large, and will be difficult to find a particular patient in the parent table to update fills in the child table. How can I search through the parent table with ease so that I can update fills?
Thanks for those who help!
I have a database and I made a query to search records. The query worked perfectly, but now the only problem is that if a search has an ID number that is bigger than 239, the results will not be displayed. The query will be empty! :S
What is the problem with my query?
Thanks in advance
Aber^28