Hi all, I need to extract in a query a recent range of records, these records should be all before a certain date and all the following future records example:
if today date is 12/12/2007 I need to extract all records that are dated from the 1st of november and all the records that come after the 12/12/2007.
In the criteria I have set "Date()" what else should I be adding to get the range mentioned above?
Thanks
so i have an interesting question and im hoping that someone can help on this one. i need to pull date from a specific table, no problem, that's written and working fine, next i need to be able to join the data from another table by a primary key, again no problem. third, i need to be able to select the date (using WHERE) for a specific date range. (i.e. i enter the date range of 01/7/2007 to 15/7/2007) and the query comes back only showing the data from that specific time, not the data from before or after. this is where my problem lies, all the entered data is being shown after entering my date range. i am going to include my SQL statement, just so you can actually see what im really talking about.
SELECT srealest.Name0, srealest.Dist1, SREpayments.Face2Pd, SREpayments.Penalty2Pd, SREpayments.[2paid], SREpayments.Face3Pd, SREpayments.Penalty3Pd, SREpayments.[3paid], SREpayments.Face4Pd, SREpayments.Penalty4Pd, SREpayments.[4paid], srealest.Map, srealest.Parcel, srealest.LeaseHold, srealest.TaxRebate1, srealest.TaxFace1, srealest.TaxPenalty1, srealest.TaxYear, srealest.BillNo, srealest.PdRebate1, srealest.PdFace1, srealest.PdPenalty1, srealest.DatePd
FROM SREpayments INNER JOIN srealest ON SREpayments.BillNo=srealest.BillNo
WHERE (((SREpayments.[2paid]) Between Forms![SD SRE]![Beginning Date] And Forms![SD SRE]![Ending Date]) Or ((SREpayments.[3paid]) Between Forms![SD SRE]![Beginning Date] And Forms![SD SRE]![Ending Date]) Or ((SREpayments.[4paid]) Between Forms![SD SRE]![Beginning Date] And Forms![SD SRE]![Ending Date])) Or (((srealest.DatePd) Between Forms![SD SRE]![Beginning Date] And Forms![SD SRE]![Ending Date]))
ORDER BY srealest.Name0;
any thoughts or ideas on how to accomplish this would be greatly appreciated!
I'm having issues with reports. What I want to do is only print specific dates in a report. I have read and tried everything to accomplish this but it just isn't working. Any suggestions????????????
View 2 Replies View Relatedhi, how do I select my data where the date is beyond the date range specified? For instance, I wan to select all the rows except the rows that are between 3/22/2005 to 10/17/2005. Is it possible to select the query? I tried the condition 'where date < #3/22/2005# and date > #10/17/2005#', but it return no rows at all. Does anyone knows how to do smth lidat??
View 14 Replies View RelatedI want to make a delete query, which delete record between certain dates, I want access to ask user to specify range of date before executing the query.
View 11 Replies View RelatedI'm working on a loan database for my personal use and obviously I'm new to access
See attachment ...
I have multiple buildings that I own. Each building earns a monetary amount each day. Some days they earn $0, some days they earn $1,000. This is all kept track in a data base in which someone manually enters the information each day.The three fields are:
Building
Date
Profit
I have narrowed a query down to one building, and I am interested in two things. How do I write a query that shows a 30 day peak (the most profitable 30 days). In other words. I want to see the following
Building: GNB Tower Date: 02/14/13 - 03/15/13 Profit: $25,162
The next thing I am interested in is a 7 day peak from within these 30 days. This shouldn't be too difficult if I can figure out how to query these 30 days, I can query 7 days out of those 30 days. So this bigger mind stumper is the first one.
out of a date range of months and months (Let's say 10/12/13 - 6-14-13).Once I figure this part out, I am sure I can figure out how to compile all buildings into one large report with their 7 day peak and 30 day peak.
I am trying to calculate the total hobbs time (Ending Hobbs - Starting Hobbs = Total Hobbs) based on a user inputed date range. The query that I created (see attachment) doesn't seem to give me what I'm wanting.
View 14 Replies View RelatedHi folks,
I have a crosstab query that counts the number of records that each employee has.
I need to be able to specify the date range to show though and the query won't let me use:
"Between [Type the beginning date:] And [Type the ending date:]"
I've attached a snapshot of my query design and output.
I've tried everything I could think of!!
I'm using a form to select a date range. Using the following, and entering start date of 6/1/14 and end date of 7/1/14 I would expect to pull the records with a date of 7/1/14; however it doesn't. I have to enter and end date of 7/2/14 to pull 7/1/14 records.
>=[Forms]![F_Transaction_Date_Range]![txtStartDate] And <=[Forms]![F_Transaction_Date_Range]![txtEndDate]
I am trying to create a form that will select records by date range. The form contains 2 textboxes, with pop-up calendars to select dates. I managed to come up with this code, however, it's not working. Whenever I run the code, my database just goes blank, as though it's selecting something that is not in the records.
Code:
Private Sub Command16_Click()
Dim Task As String
Dim startDate As Date
Dim endDate As Date
startDate = Me.Text12
endDate = Me.Text14
Task = "SELECT * FROM Final WHERE Final.Timestamp BETWEEN #" & startDate & "# AND #" & endDate & "#;"
Me.RecordSource = Task
End Sub
How does one actually do the date range search? Could it be because my timestamp actually has both date and time, that's why the date search is not working?
I recently have ontained some responsibilies from a coworker who has left the company.
I have frmEdgeReport which uses ratio buttons to populate the
multiselect listbox .. this all works.. now i need to add date ranges and
Everything I do seems to screw up what I already have working..
I have added two textboxes - txtStartDate and txtEndDate.
Currently I am getting error when i put the SELECT statement in its own query that says "Invalid SQL Statement; expected 'DELETE', 'INSERT', 'PROCEDURE', 'SELECT', OR 'UPDATE'."
and when I just run my form I am getting an error that says "Error 3142 - Characters found after end of SQL statement"
this is what i have so far :
Private Sub SetReport()
On Error GoTo Err_Handler
'Purpose: Open the report filtered to the items selected in the list box.
Dim varItem As Variant 'Selected items
Dim strWhere As String 'String to use as WhereCondition
Dim strDescrip As String 'Description of WhereCondition
Dim lngLen As Long 'Length of string
[Code] .....
I have a weekly list of transactions that come in the format DD/MM/YYYY HH:MM:SS, I need to tag these individual transactions with a week number. The problem is, I can't use the Datepart function etc. as the day is classed as running from 8am to 8am rather than midnight. I have a list of all of the weekly date ranges for a few years (with the time) so I was able to solve this problem in excel by using the Index and Match functions. However, I'm trying to automate this process as much as possible so I'd rather perform this function in Access.
View 4 Replies View RelatedOK I have done a select case as follows
Private Sub Form_Current()
Select Case DatePart("w", Tape_Date)
Case 1, 3, 5
Clearly this runs/works on a Sunday, Tuesday and Thursday.
I have tried to adjust this to work on a specific date but I'm struggling.
Would I use 'datePart' or just 'Date' and what format in the case would I use.
Thanks in advance
I have a table that stores price records with a field for the effective date but there is no field for the inactive date. How can I write a query to return the price for a date that falls between recorded effective dates?
Example: A record exists for 12/03/2005 and the next is 01/04/2005. How can I find the effective price on 18/04/2005?
Thanks
Hi I could do with some advice on how to start the following and if best to use both excel and access to achieve it.
I want to enter a range of data when I receive a bill such as date, supplier, bill amount, description, quoted price, customer job and retail price. Once I enter this I want to be able to do the following,
1.Pick a customer job and date range and get a report for all the details of bills received in relation to that customer in that time so that I can send the customer a list of items they bought in that time period and what each item cost.
2.I want to be able to compare cost prices from different suppliers and print a list of all items which shows who the preferred supplier is for each item based on the cheapest.
3.The quoted price from suppliers should automatically appear when the description and supplier has been entered.
4.There needs to be some sort of warning if the quoted price doesn’t match the bill price
5.I need to be able to get a report which gives the details for any bill which was entered that was not bought from the preferred supplier.
Some advice on pointing me in the right direction to get started is what I need and would be greatly appreciated
Thanks
Adw
I am using Access 2007. This is the problem; I have a warehouse divided into four departments North, East, South, and West. Each department is assigned its own storage location range North is N1-N1000, East is E1-E1000, South is S1-S1000, and West is W1-W1000. On the access input form of my database are two fields, one combo box field for Department and one combo box field for location stored.
When the user is updating the data base for parts received or shipped, the user must enter the department and location stored to correctly debit or credit that department. The location stored entered must be assigned to the department. (Example: dept. is north and storage location is N65, the user enters D65 instead, error message is displayed, "you have entered the wrong location").
What I need is instructions how to write the code to check the fields to verify location stored matches department, and display a warning message. How do I do this? I have a table with department names and storage location ranges.
I need to attribute a value to records between a certain range, example
All records that the field "Date" is between 01/04/2007 and 31/03/2008 I need to return a value in a field named "Group" 2008 in my table.
Example:
12/02/2003 = 2003
15/03/2003 = 2003
15/04/2003 = 2004
20/08/2003 = 2004
17/12/2003 = 2004
20/02/2004 = 2004
01/04/2004 = 2005
I have a table that has entries recorded with date and time in one field, and I want to have a query that returns all records of a specified date or date range, regardless of the time in the field.
I have tried
Code:
Between [StartDate:] And [EndDate:]
And
Code:
Between [StartDate:] & "00:00" And [EndDate:] & "23:59"
Neither of which work ....
Is there a statement that will allow me to select a range of records in the
middle of a selection of records? e.g. Rather than TOP 10, can I get like
records 10-20, or 50-65 etc?
Prodigy.
I have a table with a numeric primary key field. Is it possible to create a select statement which returns a list of the records with the same whole number??
E.g
144.2
144.4
144.5
144.7
144.8
144.9
I need this as the Rowsource for a combo-box. Are there wildcards that I could use??
I have a spreadsheet that my company uses that has about 20 clients presented in a single sheet in Excel so I was wondering if it was possible to display only a selected range (i.e. only one client) in a specific form in Access to cleanse this up a bit.
View 2 Replies View RelatedI have a form and table which I use to collect some reservation information. I then have a subform/table which I use to enter the actual dates of for that reservation. This subform/table has only three fields. The foreign key field that links it to the main form/table, the date(s) entered and the subform/table autonumber primary key.
What I would like to do is use an ActiveX type of calendar as the subform and be able to select a range of dates. If someone is making a reservation for 8 days, I want to be able to select that range of days on the calendar and have create/enter all 8 of those records in the subform/table.
I would much prefer this as opposed to simply collecting a single IN date and a single OUT date.
Anybody have any ideas?
I am trying to connect to excel from Access database. Once I make the connection I want to delete data from a range on a specific sheet. There are 4 columns on the spreadsheet but i wouldn't know how many rows. So for example, A150... but I may not know what the last row is. How would I be able to delete data from a range of columns to the last row?
View 4 Replies View RelatedIs there a way to show the earliest and latest dates of a report generated by a non-date field?
E.g. I generate a report based on Food, and it'll list the days that this food is associated with. Is there a way to show the first and last day that appears in this report (i.e. the range of dates that the report shows based on the food selected)
I have some code that filters job raised I have 2 text box's txtdatestart and txtenddate after entering. date range between the too text boxs it shows me all job raised with in the period.i have entered what I would like is filter it again by client field using combo box cboclient so if the user enter's client name in cboclient combo box and date range in txtdatestart and txtenddate it will only show jobs raised with in the date range of the client enter in the combo box but if the combo box is empty show.
Code:
Private Sub cmdPreview_Click()
'On Error GoTo Err_Handler 'Remove the single quote from start of this line once you have it working.
Dim strReport As String
Dim strDateField As String
Dim strWhere As String
Dim lngView As Long
Const strcJetDate = "#mm/dd/yyyy#" 'Do NOT change it to match your local settings.
[code]....