i have a multiselect listbox in my form.
The multiselectlistbox contains the names of different persons from tblUsers.
it's allready possible to write the id's of the names to another table (tblPresent).
But what I can't manage to do is re-select the values in another multiselect listbox. This multiselectlistbox is located on my editform.
I can display the values using a valuelistbox, but i need to see the non-selected items too..
For the life of me I can't get the Multiselect Listbox to correctly pass along all of the item selections to a Query which a form is based on.
I've been up and down the forum, and I can't figure out what piece of code to use and how to use it successfully.
I've been able to get a string created using the example posted here (http://www.access-programmers.co.uk/forums/showthread.php?s=&threadid=47909) and it's in the format of "54,67,89,100" etc.
Public Function Public Function fMultiSelect(ctlRef As ListBox) As Variant Dim Criteria As String Dim i As Variant
' Build criteria string from selected items in list box. Criteria = "" For Each i In ctlRef.ItemsSelected If Criteria <> "" Then Criteria = Criteria & "," End If Criteria = Criteria & Format(ctlRef.ItemData(i), "0000000") Next i
fMultiSelect = Criteria gMultiSelect = Criteria End Function
I now need to pass that string to a Query. Once it's been passed to the query, I can open the report based on it.
Essentially I have a button that will perform the string creation, and I would then like to open a report. I want to base the report off of a query and then have the query use Criteria to dwindle down the report.
Am I missing something here?
The long explanation:
I have a single form that allows for the selection of the report. Once the report is selected, certain fields appear that allow for certain criteria to be selected (ie. Class Name, Multi-Select Class Name, Student Names, Multi select Student Names, Dates, etc.)
Once the report has been selected and the criteria set, a user hits a single button that runs the specific report.
Any better ideas of how to set this up. The reports will ultimately be basing their criteria on what the form has in all of it's unbound fields.
I also have a table that specifies the Display Name, actual Report Name for the button to figure out what report to run.
Bottom Line. I want to use a Listbox to filter a report. If I can use a query to base the report off of even better. I don't want to create the SQL in VBA.
I have a multi-select listbox (called PotentialItems) which behaves perfectly unless one of the fields has a null value in it, in which case I get an error 13, "Type mismatch" in the following code. It is valid business-wise for column 9 to be null.
Code: Dim varItem As Variant Dim dblTargetPrice As Double With Me.PotentialItems For Each varItem In .ItemsSelected If Not IsNull(varItem) Then dblTargetPrice = Nz(.Column(9, varItem), 0) '<----- Error here End If Next End With
I am currently trying to make a form which will generate a report for the users. Currently the form has 3 combo boxes where users select which fields they want displayed from the table in the report. They also have sorting options next to them (Asc or Desc). I am now trying to put in a multi select list box under each combo box to allow users to filter the report to their liking. Currently I am trying to pull distinct values from the specific field of the table and display them in the listbox for users to select.
I have tried using vba to set me.filter1.rowsource = SELECT DISTINCT me.combo1 FROM EVAP_Database, but this doesnt seem to work. I have also tried a few other codes and still no luck.
I am using the selections made of the form to generate a query for the user.
I have a CITIES listbox that is populated with values from a stored query.
I would like to make it multi-select and populate a LOCATIONS list box and a NAMES list box based upon the CITIES that are selected.
I have the locations currently populated from a stored query that reads the City selection from the Form. It looks like this
Code:
SELECT DISTINCT (t_location.LOCATION) AS Expr1 FROM t_location INNER JOIN t_asset_master ON t_location.LOCATION_PHY_ID = t_asset_master.LOCATION WHERE (((t_location.CITY)=[Forms]![MasterQueryGenerator]![CityList]));
I also want multi-select so that is you can un-select all and get the results for all cities.
Here is my half thought approach.
Code:
Private Sub CityList_AfterUpdate() 'Dim LocQryStr As String 'Dim r As Integer 'Dim ctl9 As Control 'LocQryStr = "SELECT DISTINCT (t_location.LOCATION) " & _
[Code] ...
I intended to have the variable LocQryStr as the row source but I abandoned the idea of having multi-select when I saw that .Selected(I) never returned true. Its like the values aren't read in this subroutine.
hello! i'm trying to select more than one value in a listbox based on a comma-seperated string in a textbox. it seems to be doing what it's supposed to do, except it's only selecting the last value it loops through. it doesn't seem to remember the others. there's probably an easier way to do this than how i did it, but here is the code:
Code:Dim lst As ListBoxDim lngCount As LongDim strSelection As StringDim strNewSelection As StringDim intLen As IntegerDim lngLen As LongstrNewSelection = ""strSelection = Me.Text19.ValueWhile InStr(1, strSelection, ",") <> 0strSelection = Trim(strSelection)lngLen = Len(strSelection)intLen = InStr(1, strSelection, ",")strNewSelection = Left(strSelection, intLen - 1)Set lst = Me!List0lst.RowSource = lst.RowSourceFor lngCount = 0 To lst.ListCount - 1 If lst.Column(0, lngCount) = strNewSelection Then lst.Selected(lngCount) = True Exit For End IfNext lngCount strSelection = Right(strSelection, lngLen - intLen)Wend
I am just starting out in Access Development. I have a database that runs a logistics department. This was working fine until the users wanted a little more tweaking.
The report prints out the vehicles with all corresponding drops. This comes out all on sheet.
Is there a way that I can create a form to filter the report via a multi select listbox and print each drop selected on a seperate sheet of paper.
I am having a form that has a listbox, which brings up a lot of records, and the user may choose multiple records, but when user wants to scroll down the page to multi select, he cant do it with the ctrl keyboard button, when he press ctrl the page jumps back up, is there any workaround for that?
I recently have ontained some responsibilies from a coworker who has left the company.
I have frmEdgeReport which uses ratio buttons to populate the
multiselect listbox .. this all works.. now i need to add date ranges and
Everything I do seems to screw up what I already have working..
I have added two textboxes - txtStartDate and txtEndDate.
Currently I am getting error when i put the SELECT statement in its own query that says "Invalid SQL Statement; expected 'DELETE', 'INSERT', 'PROCEDURE', 'SELECT', OR 'UPDATE'."
and when I just run my form I am getting an error that says "Error 3142 - Characters found after end of SQL statement"
this is what i have so far :
Private Sub SetReport() On Error GoTo Err_Handler 'Purpose: Open the report filtered to the items selected in the list box. Dim varItem As Variant 'Selected items Dim strWhere As String 'String to use as WhereCondition Dim strDescrip As String 'Description of WhereCondition Dim lngLen As Long 'Length of string
I have two listboxes. One for Activities and the other for Organizations.
I set the Org listbox to be multi-select so I could run a loop on that listbox to join multiple Orgs to a single Activity. That part works well.
To do so, I am using the bound column (which is the pkey value) from the multi select listbox, and on the single select listbox I'm using the ListboxName.value to gather the pkey for the "1" side of this 1:Many series of inserts.
Now... I want to use one of the other-than-bound-column value from the multi-select listbox, but I don't know how. When setting a value I only know of the use of :
yes, I just made that up, but I hope you get the point. Meaning, as the loop cruises the ItemsSelected on the multiselect I'd like to use other than the bound column when setting variables.
I've tried using the column property to then cruise to the proper record in the listbox, e.g. :
But this seems to return the column(2) value of the first record loaded into the list box, as if the varItem piece is being ignored. I believe the loop is working properly, as when the inserts are happening correctly with the bound column of the multi-select list is correctly present as an Fkey in the resulting child records.
I just can't get any other column's value for some reason.
I'm using pbauldy's code to filter a report by a multi-select listbox. The only issue is..how do I include more (7 to be exact) listboxes to the code? It seems the OpenReport vba is only allowing 1 where clause?
Code: Dim strWhere As String Dim ctl As Control Dim varItem As Variant 'add selected values to string Set ctl = Me.VP_ListBox
So I have a list box that lists organizations. I recently changed the list box type to extended multi select. On the same form, I have a button that opens a new form where the user can input contacts for each organization. When the list box was not multi select, the expression [forms]![media]!
[List30] made the default value of one of the fields in my contact form the bound column from the selection in the list box. However, now that the list box is multi select, the contact input form does not seem to be able to get the value from the bound column in the list box. When multi select is turned on, is the bound column stored differently.
To even get the contact input button to work, I had to change the code from:
Private Sub Command40_Click() On Error GoTo Err_Command40_Click Dim stDocName As String Dim stLinkCriteria As String stDocName = "Contactsqry" stLinkCriteria = "[Organization ID]=" & Me.List30
I have a multi select listbox that I rebuild as I index thru some products in another listbox. This listbox then gives me the ingredients I can use. Works well, but the ghost selections in the listbox stay hilighted even after the rebuild.
I can select and de-select at will if there are actual items in the list box, but the ghosts remain.
Here is the code to clear the listbox
Dim _ ctlSource As Control, _ varSelected As Variant, _ intListCount As Integer Set ctlSource = Forms.frm_select_UPC_LoinGrade!lstBox_ColdStorage For intListCount = 0 To ctlSource.ListCount ctlSource.Selected(intListCount) = False Next intListCount Forms.frm_select_UPC_LoinGrade.Refresh Forms.frm_select_UPC_LoinGrade.Repaint
I have a problem that I haven't seen discussed here yet. (I know this is not good practice, but we're doing this for transfer to another application that wants and accepts data this way)
1) I have a multi select list box. 2) I have code that saves all the values in a semi colon delimeted list in a single field in the DB. (As I said, the application that this data is going to (and from) wants and accepts data in this way)
3) My problem is this. When I re-open my form, how do I get the values that are stored in the database to be highlighted in the multi select list box. I have code similar to this running, but still can't figure it out.
Dim lst() As String
rst.Open sSQL, cnn, adOpenStatic, adLockOptimistic lst = Split(rst(0), vbCrLf, -1) 'Split the recordset into an array For i = 0 To List96.ListCount For j = 0 To UBound(lst) 'lopp until the upper bound of the array
'If the item in the list box = the item in the array then highlight the item in the list box If List96.ItemData(i) = lst(j) Then List96.ItemsSelected(i) = True End If Next j Next i
In a nutshell, that's the problem. My list box contains a list of about 5 or 6 things, the user can select any number of them, and I store it in a single field in the DB semi colon delimited. However, I don't know how to return that field to my list box with the selected values highlighted. IE if the list contains A, B, C, D and the user selected A, C the field in the DB looks like this A;C. When I open the form again, I want to highlight A and C in my list box since those were the fields the user selected.
What happens is A;C gets passed to another application (which wants it that way). However, in that other application those values may or may not change, and then they will be passed back to me. (IE the other application may change those values to A;B;D and pass it back to me (which I accept no problem). However, when the user opens the form I want A B and D to be highlighted in the multi select list box
I have a multi slect list box (simple) and I need to find and select an item using vba - e.g., the bound column is the ID field and I need to select a specific ID (which will be different each time) as opposed to selecting the 100th record for example. How do I do this?
Hi, is there any (reasonably simple) way to select or deselect multiple items from the List Box with individual clicks without using Ctrl key. Eg first click on an item would select it leaving all other items as they are, subsequent click on the already selected item would deselect it etc. I hope this is not too confusing and I would appreciate some help. Thanks!
I've been using the following code successfully in Access 2003 & now I need to migrate to Access 2010. The purpose of the code is to use the items that the user selects in the list box to build the criteria of a query. Access 2010 keeps giving me a syntax error when I try to run the query & I don't know why:
My code is:
On Error GoTo Err_Command151_Click
' Declare variables Dim db As DAO.Database Dim qdf As DAO.QueryDef Dim varItem As Variant Dim strCriteria As String Dim strSQL As String
[Code] .....
The syntax error I get in Access 2010 is:
Syntax Error in query expression 'SELECT * FROM qryContractListSummarybyDateContract3TYPEBREAK WHERE qryContractListSummarybyDateContract3TYPEBREAK.Rep ortableName IN('Adbri Masonry NSW');'
I am looking to see if anyone can help i have been able to get the multi select function part of my form working but i need another filter in the query for a date but it keeps deleting this part of the query everytime i run the report what i need to be able to do is get all jobs against a specific leadcraft that are in the past and also 31 days into the future.
Paul
here is the sql so far, thanks to those who helped already.
Private Sub preview_Click() Dim db As DAO.Database Dim qdf As DAO.QueryDef Dim varItem As Variant Dim strCriteria As String Dim strSQL As String Set db = CurrentDb() Set qdf = db.QueryDefs("FAelecplan") If Me!Leadcraftlist.ItemsSelected.Count > 0 Then For Each varItem In Me!Leadcraftlist.ItemsSelected strCriteria = strCriteria & "MAXIMO_V_WORKORDERS_FA.LEADCRAFT = " & Chr(34) _ & Me!Leadcraftlist.ItemData(varItem) & Chr(34) & "OR " Next varItem strCriteria = Left(strCriteria, Len(strCriteria) - 3) Else strCriteria = "MAXIMO_V_WORKORDERS_FA.LEADCRAFT Like '*'" End If strSQL = "SELECT * FROM MAXIMO_V_WORKORDERS_FA " & _ "WHERE " & strCriteria & ";" qdf.SQL = strSQL Dim stDocName As String stDocName = "elecplan" DoCmd.OpenReport stDocName, acPreview On Error GoTo Err_preview_Click Exit_preview_Click: Exit Sub
Err_preview_Click: MsgBox Err.Description Resume Exit_preview_Click End Sub
I have multiple codes assigned to records in a table. I want to be able to say IIf [code] = "FMIX",[qty]*2.2046/7.1, IIf [code] = "Liqd", [qty]*2.2046 and everything else can just equal [qty]. I have tried this statment Expr1: IIf([family-code]="FMIX",[SumOfqty-on-hand]*2.2046 IIf([family-code]="LIQD",<[SumOfqty-on-hand]*2.2046>,[SumOfqty-on-hand]),[SumOfqty-on-hand]) and it doesn't work. Can anyone tell me what is wrong?
Hi, This is my first posting on this forum, and I would greatly appreciate any help with this issue...
I have a form that is used for entering information into tables. I would like to be able to select multiple options from a list on a form and have it saved into a table. Any ideas? Is this even possible :confused:
Here are some paths I followed: The table has a List Box field, type Text, that gets values for the list items from another table. On the form, I have changed the Multi-Select property of the List Box to "Extended" so that the user can select multiple items from the list. But when I select items from the List Box, the table is not getting updated with the selected items.
Another way I tried doing this: The table has a List Box field that has no values (I'm not looking up values from another table). On the form, I set the Row Source of the List Box equal to the query that gets the list values from a table. I then set the Multi-Select property to "Extended". When I select multiple items from the List Box, the table doesn't get updated.
FYI: The control source for the list box on the form is pointing to the field in the table.
I would like to create a form that my users can select multiple check boxes from and have only those records that meet the criteria come up in a search.
See attachment for a look at the form.
I need to be able to let the user have the ability to put in a name and then select any of the check boxes and then click on a search button that will execute a query that will bring up the results.
Any help with code or at least a point in the right direction would be nice.
Is there any way to have a Multi-Select Combo Box fill a single field in a table? I've been messing with this for some time now and just can't seem to figure it out.
I have two questions regarding a multi-select list box.
First, is there any way to have the list box include multi-line items...or which will scroll beyond the right border of the box?
Second, I have a multi-select list box which is populated with an ID # column and a Description column. The user can select as many items from the list box as needed and, as the list box item is clicked, the ID # is added to a memo field on the form, with each ID # delineated with a coma. Is it possible to separate the memo field back out so that each item is identified individually (for report purposes)?
Thanx so much for your help with this...you guys/gals are simply the best!
