im trying to select data from an access database via asp. the data must be stored in a recordset and fit the criteria as given in the variable varItemSelected:
heres what i have
SQLstmt = "SELECT * FROM Products WHERE product = " &_ varItemSelected
set rs = con.Execute(SQLstmt)
but i get the error:
Microsoft JET Database Engine error '80040e10'
No value given for one or more required parameters
umm.. i have a form with a combo box which is linked to a table which gives me customer id numbers. and i have a listbox which i want the names and addresses to appear when i select a cusotmer id number from the combo box
so on the list box i put " SELECT CustName FROM Customers WHERE CustID=$combo43; " in row source; if i change $combo43 to 0 the name appear but that is fixed and i want it 2 change when i select a cusomer id number from the combo box
I have a database which records time spent on various projects and I would like to be able to calculate the time spent on any particular project between two selected dates. The report and the query behind it already works to display the time accrued on all the dates of a project, but I want to be able to break it down to small ranges of dates
I have a form on which the user selects the start date and the end date. How can I apply this calculated information as a criteria in a query so that I can produce a report with the relevant information on it.
I already have the report and the date selection form designed. The dates selected go into two unbound fields which have a date format.
Each record in the database has a subform (one to many relationship) with multiple records. When the user clicks on a record in the subform I want the information from the subform and from the mainform to go into a Word document. I am able to pull the data from the main form but not from the sub form. Any suggestions would be appreciated. Below is an example of what I am using to get the data out of the main form for the bookmark in Word called "ClientName".
I have data in a table I am extracting using an append Query, I wish to assign a number from the original table +1 to the records pulled by the append query. I am very new to this and have the expression below, however the result is #error in created field CertifNumber The data I am looking for is in table Sample Details and the Field is CertNo
Hi, I have 13 tables in all. 2 are Area and Scope which have unique entries of areas and scope and the remaining 11 will have a primary key, Tag_No. I want to select data from these 11 tables such that ALL the data will be pulled out but say table 1 has a column MOC and remaining 10 tables dont, then it will be a blank or null in those columns for the 10 tables. How can this be done? (I hope I am not confusing!!!) Adwait
I am having trouble writing what I think should be a fairly straight forward query... I am have a table with 2 fields, the first contains a list of subjects, the second contains a list of scores that students got in their tests in that subject.
So the data looks like this:
Maths 54 Maths 69 Maths 41 English 71 English 55 Art 44 Art 43 Art 66
I would like to write a query that selects only the highest score for each subject and presents it like this:
I am constructing a database for a friend and need to filter data from a daily log to enable a report to be generated for each months actions. I have created fields of: entry date, month and year with the view of filtering by month and year. How do I perform this task?
I would like to create a excel file to let the user to input the following column.
Date No. of success No. of failure ==== ============ ============== " " " " " " " " "
I would like to have a function that can allow the user to select the date range and its total no. of success and no. of failure
For example , the user select from 31-03-2001 to 31-12-2012 , then output the report which show the total no. of success and no. of failure in this date range , is there existing tamplate that I can use ? if no , what is the simplier way to do it ?
if the data is very large , I want to create a access db to store it , how to do it ?
I would like to create a excel file to let the user to input the following column.
Date No. of success No. of failure ==== ============ ============== " " " " " " " " "
I would like to have a function that can allow the user to select the date range and its total no. of success and no. of failure. For example , the user select from 31-03-2001 to 31-12-2012 , then output the report which show the total no. of success and no. of failure in this date range , is there existing tamplate that I can use ? if no , what is the simplier way to do it ?
If the data is very large , I want to create a access db to store it, how to do it ?
I have an on click event to mail a report which works. I want to change the text to include data from a table.
I changed the code to include the field 'office' from the table 'Checks' but get an error saying 'Object required'.
Code is : Private Sub cmd_mailreport_Click() Dim office As Object Set office = Checks.office DoCmd.SendObject acReport, "checks", "PDFFormat(*.pdf)", _ "info@company.com", "", "", office & " Daily Check - " & Date, "Attached is the report for the office", _ True, "" End Sub
I have with my database. It's holds cost data including purchase made in foreign currencies which need to be converted to GBP using the correct exchange rate so a variety of reporting & stats can be performed.I have a table called Costs within which there are 2 fields
Purchase Currency Exchange Rate
I also have another table called Exchange Rates 13/14 within which there are 2 fields
Currency Exchange Rate
When a value is entered in the Purchase Currency field on the Costs table (this is a look up field linked to Exchange Rates 13/14 so it shows the listed currency in drop down) I need the database to automatically populate the Exchange Rate column in Costs i.e. match the value in the Purchase Currency field to the Currency field in Exchange Rate 13/14 and populate with corresponding Exchange Rate from Exchange Rate 13/14.I have tried the following and none work:
SQL Tried
1. UPDATE Costs SET ExchangeRate = [Exchange Rates 13/14].[Exchange Rate] WHERE Costs.[Purchase Currency] LIKE [Exchange Rates 13/14].Currency
2. UPDATE Costs SET ExchangeRate = [Exchange Rate] FROM [Exchange Rates 13/14] INNER JOIN [Exchange Rates 13/14] ON Costs.[Purchase Currency] = [Exchange Rates 13/14].Currency
3. SELECT [Exchange Rate] FROM [Exchange Rates 13/14] WHERE Costs.[Purchase Currency] LIKE [Exchange Rates 13/14].Currency
I know it is possible to have a drop down for Purchase Currency which shows 2 columns (both Currency and Exchange Rate) you can then use the exchange rate figure for a calculated field. The problem I have is that I am importing data into the costs table from excel. In Excel I can only have 1 value in the Purchase Currency column on the upload template. If I just have Euro in this column the database does not match it to the Euro in the Purchase Currency drop down and also store the correct exchange rate.
Or is the alternative to put this into the calculation of GBP Unit Cost where this somehow matches the Purchase Currency in the Costs table to the Currency field in Exchange Rates 13/14 tables and uses the appropriate exchange rate from Exchange Rates 13/14 to calculate GBP Unit Cost in Costs table.
I have staff table which is a lookup field on the phone call table.when the phonecall form opens I want the employee field to auto fill in the employees name from the lookup field according to there security level.so something like this
On Open Select Case Forms!frmLogin!cboUser.Column(4) Case X = 4'the employees security level' Case X = Insert Table_tblPhoneCalls!EmployeeID"4" into Form_frmPhoneCalls!Employee. End Select
of course this is a syntax error as I do not know the correct code words.
I created a subform that displays the records of a select query after selecting the desired data from a single combo box (for instructors name) and then using an OpenQuery macro attached to a button.
Only 1 record is displayed in the subform each time I hit the button. If I look at the query return there is no change. However, if I close the query and select a new instructors name, although I only get one record in the subform, the query when opened shows all the correct records.
I have a small problem which I feel I should be able to solve but the hours of trying are proving me wrong!
From a choice of 16 events, competitors can enter as many as they like providing they are eligible. For each event they receive performance marks which are duly stored in a table. Some compete in 1 event others in 5 or 6. (I do not have a control showing ‘number of events entered’ and have tried several options, all unsuccessful, to create a ‘count’ of events entered. Is there a way?) My main problem is, from each individuals’ records, how do I select only the highest 3 marks from the classes each individual entered.
I have a table with customer details, probs over 3000 customer, and i need a method of selecting the customer in a form by their surname. Currently i have a combo box, but as you can imagine, this is not practical with so many records. anyone think of any other way to do it?
I have a query that gives an out put of 'worst offenders'. these offenders are in order of on field ascending (number of entries made per week) and another field descending (total sales). It is by the combination of the sorting of these fields that we have an ordered list of offenders.
For my report i want to only see the top 10 records of this sorted list.
so for this selection i simply want to select the [B]first 10 records [B]of the ordered list. I cant make a selection by any one particular field(as explained above)
i have looked into the 'select top' functions and 'dfirst', but I dont think they'll work for me.
Can anyone tell me why sometimes when i'm using access all of a sudden when i click in cells, control boxes etc that i select everything and i cant position the mouse with a string of text with selecting all of it.
hey guys, im having one last problem with a report im making. just want to thank boblarson, Rich and Dennisk for all the help they have given me upto now, i have added to your reputation guys, thanks!
My problem is as follows:
I have a form for my products and a subform for the suppliers, each product can have many suppliers.
I need to have a report of products to send out to customers, so i created a check box to "tick" if i want to include it in the report. So far so good, however, the report shows each product several times for each supplier :(
can anyone tell me how to select only the supplier with the lowest supplier price for each product
I am currently trying to create a query that will allow me to do the following:
Prompt the user with a pop up box, asking:
Please enter start date Please enter end date
It will then select everything from my table between those two dates (this works), and then it will ignore all those items that have a time after 7am or before 7pm (this works), but I need it to also select all entries that fall on a saturday or sunday. Now because my raw data comes in the form of (australian dates): 7/09/2005 9:39:10 AM, I am using an update query to split the field into two fields: DateFrom and TimeFrom (both are date/time fields). I then need to create another field called Day, which takes the data in DateFrom and converts the date to dddd (using Format(Date()) i assume), giving me a field with the day name in it, ie: Sunday.
I can then use that to differentiate between weekdays and weekends.... as I use MySQL and PHP more often than I do access, I have no idea how to do this.
So in short:
How do I (this is what i think i need):
Select * from tblData WHERE Day!=Sunday OR Saturday AND TimeFrom > 7:00pm OR TimeFrom < 7:00am
Select * from tblData WHERE Day=Sunday OR Saturday
Both of those selections, will of course need to be performed within my date constraits specified by the user.
I have a small problem in query selection. I have a query that selects values based on a criteria. [value from a combobox]. The problem is that i need to select all the rows if the value of the combobox is empty.
I am working on a query to select the most current value for a given record based on dates. The record has an associated cost for a given year say 2000. For years 2001 to 2006 there is no cost. I want to use the cost in 2000 for the most current cost even though my date criteria specifies say 2002. Can this be done within the select query?