Send A Large Number Of Reports (actually 1 Page Invoices) As Faxes?
Aug 8, 2011
I need to send a large number of reports (actually 1 page invoices) as faxes. A few years ago I used to use a version of WinFax Pro with command line parameters to accomplish this. I would actually print each invoice to the WinFax Printer with a command line that contained the fax number for that client and using this method I was able to send each invoice to a different fax number (customer).WinFax is no longer available.
View Replies
ADVERTISEMENT
Jul 20, 2014
I have an unbound text box in the detail section of a report that can be anywhere from a couple of lines to more than 90, depending on what items have been selected elsewhere. I've gotten the size of the textbox and detail section to vary using .height and allowing for 270 per line. All this works fine and everything prints. However...
The problem is that with the reports where this textbox won't fit on the first page, the detail section doesn't begin printing anything until the second page. It will then break across pages 2 and 3 just fine, but I would like it to start printing on page 1 whether it will fit or not. Research shows it has something to do with the "on retreat" event, but I can't find enough to figure out what to do.
View 8 Replies
View Related
Jun 29, 2013
Send only one or two pages of a multi-page report. I have a report that has three pages. I only want to send the first two as a pdf file. Can this be done with VBA? I know it can be done using Exporting Data on the External Data ribbon, but how can I do it via VBA?
View 4 Replies
View Related
Dec 20, 2014
I am trying to create a report that has a header ( all ok ) then could have 1 or 15 detail lines ( all ok ) which contain cost for each line
then I have a footer with the subtotals of the costs and also bank details
then I have footnotes
What I need the report to do is keep the subtotals, bank details and the footer notes at the bottom of the page all the time weather I have one detail line or 15 detail lines
What is happening at this time is the footer information is moving up or down depending on the number of lines I have.
View 14 Replies
View Related
Sep 24, 2004
I have seen large projects in which there are clearly several printed database reports printed out to make one booklet.
1. How does one get page numbers for multiple reports to go in sequence instead of starting over again at 1 for each report.
2. How can you add a page reference in one report to something in another report?
Do you have to do these things by hand or is there a way to create a something with auto numbering capabilities? Do you do it by importing the reports to MS Word and creating a master document?
View 2 Replies
View Related
Jul 22, 2014
I am printing invoices and need to print the label in a subreport at the end of each customer only once. This is what I want it to look like:
2014 payments applied to cap: GA $8,078.00
NC $1463.00
SC $155.00
NOT
2014 payments applied to cap: GA $8078.00
2014 payments applied to cap: NC $1463.00
2014 payments applied to cap: SC $155.00
I use ACCESS, but I do not know SQL. .
View 5 Replies
View Related
Nov 12, 2013
I have a report which includes several subreports. There will be times when a subreport prints partially on one page and completes on the next. I don't always want to break to a new page with this subreport. However, I would want to break to a new page if the subreport cannot fully print on the current page.
View 3 Replies
View Related
Apr 15, 2013
I am building a replacement Access 2013 database for our ageing Access 2003 database. I have an invoice form with a subform with a combo box that allows me to select which jobs to invoice based on the customer selected in the invoice form, which is working fine. I have designed my invoice and have the criteria [Forms]![Invoice]![ID] in the report query so that it just selects the record that is open in the invoice form. I have an ID (which is the invoice number) group on the report and it is then sorted by date and then job number. I thought it was all working fine when I tested it, it is the same method as I used in the 2003 database. However I have a problem, when I make up and print the customers first invoice it works fine, but when I go to make up a second invoice for the same customer the invoice includes all the jobs from the first invoice as well, and if I then go to reprint the first invoice all the jobs from the second invoice as there as well.
View 1 Replies
View Related
Jun 13, 2015
If I have a report and it has controls (labels representing column titles) in the page header. Now when I print the report - if it happens that the last page has no detail records - but there is text boxes and so forth in the report footer. Is there a way to not display the page header on the last page?
I have a report where the last page shows the page header - and the field/column labels on the page header - but for which there is no detail records left to display - on the last page. There is report footer information that should display. It just looks weird because the field/column labels show at the top of the page - but there is no data remaining to print under them on that last page.
View 1 Replies
View Related
Apr 20, 2014
I have a report that should only show 1 page yet I have 2 and one is blank . I cannot find out why?
View 3 Replies
View Related
Mar 28, 2006
This number is too large [220020220020] for a field in my table. I currently have it set to Long Integer. What's the proper setting for a number this large?
Thanks
View 3 Replies
View Related
May 17, 2013
I've used the following code on the footer on print procedure:
Private Sub PageFooterSection_Print(Cancel As Integer, PrintCount As Integer)
Me.PageFooterSection.Visible = (Me.[Page] = 1)
End Sub
This works fine when you view it in print preview, but the footer don't show up at all when you actually print it.The reports default view itself is set print preview.
View 3 Replies
View Related
May 23, 2013
I have made a report on my query. The page setup is all around merging 0.2" and page size A4
When i view this report in preview it looks all my data whatever i want in a page but after every page it will generate a blank page.
I have included my report.
View 2 Replies
View Related
Feb 11, 2014
I am importing a delimited .txt file that has a number field. A value for a record coming in is 36,767 and Access is not accepting it. If I redefine the field as long integer or as double, I can manually update the record, but as soon as the file containing the record is imported, the field reverts back to integer.
How do I format the field with VBA so that Access will accept the value and not revert to integer?
View 3 Replies
View Related
Sep 4, 2012
I'm wanting to create a way of searching through and displaying a large number of pdfs. These will be of different lengths and most will have images embedded in them. Each pdf will be categorised using a variety of fields to enable fairly sophisticated searches. I then want to link this database to a Joomla CMS website.
View 6 Replies
View Related
Jul 23, 2014
I need to fill in 200000 records counting from 100000,100001,100002.... and so forth, just one column (and maybe the auto numbering).
make a new DB with these columns: ID, counter
set counter to 100000 where ID=1 (in the first record)
move to next record (or make a new record)
if ID < 300000 then set counter = 1+ (the value of counter in the previous record)
continue until ID=300000
View 8 Replies
View Related
Feb 19, 2013
I have a data where I want to create a query fulfilling the below conditions. Suppose I have two table: Table 1 and Table 2 If a value ex.98 (Table1) matches with the value with 98(Table 2),it should pick up my second higher value 103. suppose 103 is the next high value of 98 . Please see the data value.
misprepaid.asmvalue from Table2 Required Result Con 989898 then 103
if value of table1=98 then 103 from table 2 (next large number) 103103103 then 149
if value of table1=103 then 149 from table 2 (next large number) 149149149 then 175
if value of table1=149 then 175 from table 2 (next large number) 175175175 then 198
if value of table1=175 then 198 from table 2 (next large number) 198198198 then 199
[Code] .....
View 9 Replies
View Related
Jan 20, 2015
I have "Master" table with fields "Job No" and "Revision No". Both together is a primary key, so that combination of both cannot be duplicated. I have 100 other tables to be related with referential integrity(+update&delete) to Master for both fields. Apart from Job No and Revision No, all 100 tables have different set of fields which is why I had to come with so many tables.
Due to 32 limit rule, I had to come up with workaround method to have all 100 tables in the relationship. So, I created 5 other SubMaster1, SubMaster2, ...., SubMaster5 which are related to Master with relationship with referential integrity (+update&delete). Then I assigned 20 tables to each SubMaster so that 20 tables are related to each SubMaster table.
Whenever I create new record in Unit, the new record is generated in each SubMaster using update query for each SubMaster table. I have all the forms and necessary query laid out. The only missing part is being able to duplicate a record. I have limited knowledge in VBA, but I should be able to modify it to address to my requirement.
I want to copy a given record in Master, SubMasters and 100 tables as a new record. I need this feature so that I can select certain Job No and Revision No and copy that as a new Job No(assigned manually in a form) and 0 as the revision number. Possibly a button which will ask for new job number and copy everything from the active Job No and Revision No to a New Job No and "0" Revision No. The existing record may not be there on all 100 tables for the given Job No and Revision No. If it is there, then copy otherwise ignore for each of the tables.
I have a table "ItemList" which lists all the unique name of the 100 tables.
View 8 Replies
View Related
Jul 30, 2015
Have a look at this screenshot from excel.
Basically I would like to capture the quantity in stock for the above list of phones at many stores.
I started out by adding each phone model as a numeric field in tblStock, because I need to obtain the quantity value for each and every model, for each and every store.
Is there a better way to do this? I was thinking of creating just 2 fields, Model and Quantity, then adding each model as a record, then using that record as a sort of template. I wander what would be the drawbacks of this, since with the first method, if a user needs to add a phone not on the list he would have to modify the table design.
View 9 Replies
View Related
Apr 8, 2013
I am working on a project that requires data transfer using TCPIP sockets. I am using a 3rd party Library (Ostrosoft) that handles the wsock32.dll api calls.
The project calls for the creation of a header that logs into a user account.
The first part of the header is a marker, with a value of 4,275,878,552. It is to be supplied in a Binary format of length 4.
My quesion is "How do I create this marker".
What I have tried so far is a string variable - strMarker thus:
strMarker = ChrB(&HFE) & ChrB(&HDC) & ChrB(&HBA) & ChrB(&H98)
Using the ChrB function to convert the Hex version of that number (FEDCBA98)
View 5 Replies
View Related
Mar 11, 2014
I am trying to create a report that has the dates go accross the page and not down the page .
Example:
Need:
Jan 2014 Feb 2014 March 2014
Ans so on. I will also need datat under each date.
I am having issues with the reports to give me the output that I need.
View 1 Replies
View Related
Oct 23, 2014
I am trying to create an invoice report. I want to add all the costs from the detail section in my footer. I have accomplished this in either the Report footer and/or the page footer, but the problem is that the report footer doesn't go to the bottom of the page, and the page footer doesn't go to just the last page. I have tested a bunch of suggestions that don't seem to work.
1. Print page footer with Report header = NO - only works if your report is two pages or more.
2. Private Sub PageFooterSection_Format(Cancel As Integer, FormatCount As Integer)
If Page = Pages Then
Me.[TextBoxName].Visible = True
Else
Me.[TextBoxName].Visible = False
End If
End Sub
The Page functions worked, but it did not change the results from page to page. If it was a two page report, then the if statement is false and the text box was not visible on page 1, but it also was not visible on page 2.
View 1 Replies
View Related
Jul 19, 2013
I print a report onto labels (Avery 5960: 3 columns of 10 labels on a letter sized piece of paper). The report and labels print fine BUT...
I need physical page breaks between certain sections. When I click on "keep whole group together on one page" in the "group by" section of the report, it starts a new COLUMN of labels (which Access sees as a new page), but does not force an actual new piece of paper.
How can I force a real page break?
View 2 Replies
View Related
Apr 21, 2014
I have a database of high-school football players, and I am looking to print out single page reports (or forms) that will show detail from several tables and queries. This will act as their resume when they visit schools on recruiting visits. The reason for needing query items, is that I have developed queries that return the most up to date height, weight, 40 time etc., and that single most up to date number is what should print, not the entire table. When I try to build a report it will let me bring in multiple tables, but not queries.
View 2 Replies
View Related
May 13, 2013
I have an SQL statement which is dynamically built on a form.
It can be truncated to read
[Colour] = 'Blue'
Or it can be left as a complete statement - SELECT * from tblOrders WHERE [Colour] = 'Blue'
The statements work when I open a form.
Is there a simple way to open a report (or query) with these parameters?
View 6 Replies
View Related
Sep 26, 2013
I want to sent out my report as a pdf file with my macro.. I've been trying to use the VBA
Code:
Option Compare Database
Sub Fix1()
DoCmd.SendObject acSendReport, "MarketRiskControl_HighestDiffs_AsOfCurrentDate", "PDFFormat(*.pdf)", "my mail@mail", "cc", , "SD Counterparty Report as of Current Date", "Regards, Trading Risk Control", False
End Sub
But this doesn't work, get run-time error 2282..
I am using access 02.
View 1 Replies
View Related
