Send Textbox Value To Next Record

Nov 10, 2006

Private Sub jobdatebox_GotFocus()
Dim dteFormDate As Date
dteFormDate = CDate(InputBox("Enter the date:", "Date Entry"))
Me.jobdatebox.SetFocus
Me.jobdatebox.Text = dteFormDate


the above code pops up an alert and asks the user to enter a date. this value is then stored in the jobdatebox control (jobdate field)

the jobdate field is a Date/Time datatype and is the first item on my form so when the form opens this pop up appears instantly (which is fine)

they enter a date as the following: 6 6 and it displays as 06/06/2006

my user tabs through the fields, inserting a record.. when they reach the last field.. and tab again (to enter another record)

the pop up alert appears again..i dont want this.. i only want it to pop up the first time (when the form is opened) and then just keep that value in the jobdatebox for the remainder of the form's open session

i need something that does the following..

on new record creation
jobdatebox.value = dteFormDate (the value entered previously)


OR

Private Sub jobdatebox_GotFocus()
Dim dteFormDate As Date
dteFormDate = CDate(InputBox("Enter the date:", "Date Entry"))
Me.jobdatebox.SetFocus
Me.jobdatebox.Text = dteFormDate
for all records entered until form closes

OR

just before new record is created
if jobdatebox = not null (has a date value inside already)
then newrecord.jobdatebox = previous record jobdatebox.value


im stuck though on how to do this?

View Replies


ADVERTISEMENT

Send Record "name" Fields To Label Or Textbox Question

Jun 7, 2007

Gooday all, i have a table that consist of 3 columns, name, address and telephone number.

The table consists of about 20 records. What i would like to do is simply show one by one all the names from my table sequentially upon clicking a button on my form. I dont mind if its shown within a label or text box on my form. I would see something like

"Processing <persons name here>"

with a interval of 10 seconds between each name. Any ideas?

View 4 Replies View Related

Send Textbox/es Info To Parameter For Report

Nov 9, 2006

Ok I saw this posted up in the forum but it was not explained.

I have a Query which asks for a parameter before giving an output.

I have a report that uses this query to display the information.


Ok what I am trying to do is create a form that has a textbox and I enter the parameter's information in that textbox or textbox. How do I send the information to the query?

The reason for such a thing is people tend to not follow the set guidelines for putting stuff in a parameter box. So what I decided to do was set up a calendar form which a person has to physically choose the date from the calendar and this leaves no room for real error. My problem is I can get the calendar information to the textbox or textboxes but can't figure out how to code the button to send the textbox information to the query & parameters & report, etc...


Can someone please help me out of this situation? or point me to a starting point?

View 4 Replies View Related

Send One Record Between Two Databases...

Apr 10, 2005

Hi everybody,

I have a situation where two clients will be using the same database design - one of them will be sending information from his database for the other client to add to their database.

This will be on a record by record basis. The form that has the info entered into it also has a subform.

How do I export a single record between databases that have the same fields? I know how to export a table, but not a single record. The fact that the record that needs to be sent is from two tables (ie the main form and the subform that collects the data for those tables) further complicates things for me. Any ideas? :eek:

View 3 Replies View Related

Only Send A Specific Record Via E-mail

May 13, 2005

I am trying to use the cmd.sendobject to send an e-mail to a specific e-mail address after clicking on a button on a form.

This works fine but send all the records within a form or report but I would only like to send a specific record not all of them.

The form is a continuous form.

Many thank in advance!.

View 2 Replies View Related

Send Record To Word Document

Jun 8, 2007

OK - bit of a newbie here & maybe this question has been asked a thousand times but i can't find any answers that cover this question properly.

Basically i am writing an access database that stores contract information, contact details, orders etc etc. I want to take the Order Number field, along with the Client Name & Address etc and post it into a Word Mail Merge type document, then save that file as ordernumber.doc after checking to see whether it already exists.

I have successfully managed to send the information into word in a mail merge document & get it to save the file using the ordernumber.doc format, however it is saving it to mydocuments folder and i want it in a subfolder called orders (that does exist). It is also not checking to see if that file already exist and overwrites it if it does.

I want to change the path to where the file is being saved, check whether it exists already, then ask me whether i want to overwrite it or save as something else.

Any help would be most appreciated. BTW I am using Word & Access 2003.

*****THIS IS THE CODE I AM USING*****
Private Sub NewEternit_Click()
On Error GoTo NewEternit_Err

Dim objWord As Object

'Start Microsoft Word.
Set objWord = CreateObject("Word.Application")

With objWord
'Make the application visible.
.Visible = True

'Open the document.
.Documents.Add ("\shentcDocuments and SettingsJohn.SHENTMy DocumentsTemplatesEternit Order Merge.dot")

'Move to each bookmark and insert text from the form.
.ActiveDocument.Bookmarks("orderno").Select
.Selection.Text = (CStr(Forms!frmOrderDetails!ContractNo) & "/" & (Forms!frmOrderDetails!OrderNo))
.ActiveDocument.Bookmarks("Date").Select
.Selection.Text = (CStr(Forms!frmOrderDetails!Date))

If Me.chkDeliverYard = False Then

.ActiveDocument.Bookmarks("ClientName").Select
.Selection.Text = (CStr(Forms!frmOrderDetails!ClientName))
.ActiveDocument.Bookmarks("SiteReference").Select
.Selection.Text = (CStr(Forms!frmOrderDetails!SiteReference))
.ActiveDocument.Bookmarks("SiteAddress1").Select
.Selection.Text = (CStr(Forms!frmOrderDetails!SiteAddress1))
.ActiveDocument.Bookmarks("SiteAddress2").Select
.Selection.Text = (CStr(Forms!frmOrderDetails!SiteAddress2))
.ActiveDocument.Bookmarks("SiteAddress3").Select
.Selection.Text = (CStr(Forms!frmOrderDetails!SiteAddress3))
.ActiveDocument.Bookmarks("Town").Select
.Selection.Text = (CStr(Forms!frmOrderDetails!Town))
.ActiveDocument.Bookmarks("City").Select
.Selection.Text = (CStr(Forms!frmOrderDetails!City))
.ActiveDocument.Bookmarks("Postcode").Select
.Selection.Text = (CStr(Forms!frmOrderDetails!Postcode))

Else

.ActiveDocument.Bookmarks("ClientName").Select
.Selection.Text = "OUR YARD"
.ActiveDocument.Bookmarks("SiteReference").Select
.Selection.Text = ""
.ActiveDocument.Bookmarks("SiteAddress1").Select
.Selection.Text = ""
.ActiveDocument.Bookmarks("SiteAddress2").Select
.Selection.Text = ""
.ActiveDocument.Bookmarks("SiteAddress3").Select
.Selection.Text = ""
.ActiveDocument.Bookmarks("Town").Select
.Selection.Text = ""
.ActiveDocument.Bookmarks("City").Select
.Selection.Text = ""
.ActiveDocument.Bookmarks("Postcode").Select
.Selection.Text = ""

End If

'Print the document in the foreground so Microsoft Word will not close
'until the document finishes printing.
'objWord.ActiveDocument.PrintOut Background:=False

' Save the file using orderno field
Dim FName As String
FName = Forms!frmOrderDetails!OrderNo & ".doc"

'Quit Microsoft Word and release the object variable.
'objWord.Quit
'Set objWord = Nothing

End With


Exit Sub
**** END OF CODE****

View 4 Replies View Related

Send Single Record From Form

Dec 1, 2014

I would like to be able to place a button on my invoice form that will allow me to e-mail the individual invoice to the person being billed (the e-mail address is included on the form). I created a macro that works to send a PDF file of all of the records and I am having trouble figuring out how to send just the current record. I would also like to have the e-mail address automatically populated based on the e-mail address on the current record.

View 3 Replies View Related

Modules & VBA :: How To Send Attachment From Current Open Record

Nov 18, 2013

What I'm try to do is attach any files from the attachment field from the current open record to email i have some code i have manage to get files from the open record to save to destination /temp folder to work so outlook can attach the files but outlook is not opening or putting them in to email also have problem's that i have highlighted in the code in red.

Code:
Private Sub cmdEmail2_Click()
Dim outlookApp As Outlook.Application
Dim outlookNamespace As NameSpace
Dim objMailItem As MailItem
Dim objFolder As MAPIFolder
Dim strAttachementPath As String

[Code] .....

View 1 Replies View Related

Tables :: Export Record To PHP And Send To MySQL Via Hidden Browser

Mar 9, 2015

I am unable to link MySQL database to my local Access Database due to having a Dynamic IP (not the best of providers we chose)...

Is it possible to export a new appended record to a .php file which then sends data to MySQL via a hidden browser?

Sounds very long winded but I cant keep importing data tables directly in MySQL.

View 1 Replies View Related

Forms :: Send Single Record Displayed On Form Not All Records

Apr 21, 2015

I've created a button on my ACCESS 2010 form that will send a PDF via email. However I only need to send the single record displayed on the form not all records.

The on click command of the button sends the PDF of the report. (I read that this is what should be sent; but still get the same results.)

I don't understand how and where to attach VBA code:

Me.Filter = "RequestsID=" & Forms![OD Reversal Requests]![RequestsID]
Me.FilterOn = True

View 5 Replies View Related

Modules & VBA :: Save Current Record In Form2 Before Enter And Send The Data To Form1

Dec 4, 2013

I have 2 form, form1 and form 2 (picture attached)

In Form 1
(main form) there are "reference" field with key pressed event
then call form 2 (list of reference that user can choose)

In form 2
the problem is, when "enter" key pressed (keypress event), selection will move to next record
so the data that transferred to form 1 is wrong (next record)

The question is : how to save current record in form 2 before enter and send the data to form 1

View 3 Replies View Related

TextBox Set DefaultValue To Specific Record

Jun 13, 2005

I have a two tables one contains a list of phone lines, the other contains fields named Date, Line Number, and Number of Calls. I want to make a form that will allow the user to enter the number of calls received each day for each line. I would like to have the lines displayed in several text boxes with text boxes next to them where the user could enter the number of calls. I could use static text boxes to list the lines but the lines change often and I want them to get their values from the Lines table.

I haven't been able to find a way to write an expression or code to set the default value of the text box to a specific record. Is this possible? I figured the expression for the default value would look something like this [Text1].DefaultValue = [Lines]![Line Number].Record1, Record1 being the specific line I want displayed in the text box. Anyway of doing this?

View 4 Replies View Related

Forms :: Updating Record From Textbox

Oct 8, 2014

I have a form (frmHourEnter) with a textbox (Week_No_Calc) which has a calculation, in Control Source, based on another textbox. After exiting from Week_No_Calc how can I get a field (Week_No) in table (tblHourEnter) to be updated with the calculated value?

View 6 Replies View Related

Find A Record Using TextBox And Button

Feb 2, 2014

Basically I want to type the ID(key) of a record table in a unbound text box and then by pressing a command button to be able to bring up that record (in form view). I do not want to use a combo-box.

So what do i write as VB code in the Private Sub mybutton_Click()

Table name is [ACTION_ID], ID field name is [ACT_ID] & text box name is [TEXT_BOX]

View 6 Replies View Related

Forms :: Find A Record Using TextBox And Button

Feb 2, 2014

Basically I want to type the ID(key) of a record table in a unbound text box and then by pressing a command button to be able to bring up that record (in form view). I do not want to use a combo-box.

So what do i write as VB code in the Private Sub mybutton_Click()

Table name is [ACTION_ID], ID field name is [ACT_ID] & text box name is [TEXT_BOX]

View 3 Replies View Related

Forms :: How To Retrieve Value From Last Saved Record On Textbox

Aug 8, 2013

I'm working on a "Product Details" form somewhat similar to form in northwind, which the record source in "Products" table. what i'm trying to do is after clicking "save and new" command button to go to new record in form, i would like all text boxes to automatically retrieve the value from last saved record set as default value.

after google searching this subject i found the LastModified Syntax but i just don't understand whether i use it in VB or marco, or even how to implicate this. Should I make macro on each txtbox or should i create module? if i have to create either macro or module.

View 5 Replies View Related

General :: Continuous Form With Textbox Record?

May 15, 2014

I'm building a database to control projects of new products for a company, the flow is easy:

-Step 1: Record the general information in a main table (db_master_info) (i.e. project name, description, date of launch, etc.)
- Step 2: Record the product codes in a detail table (db_units) (i.e. product codes and quantities)
-Step 3: Record monthly information like, production and sales forecast in the detail table (db_units)
-Step 4: Build a monthly stock equation(production minus sales forecast) and record a comment, in a comment table (db_comments), about the results.

The steps 1,2,3 and 4 I did successfully!

The step 5, I'm unable to think outside of the box!

I drew a sketch (form_stock and comments.jpg attached) that might be a possible solution...

Use a continuous subform with a unbound textbox with VBA to load record and edit/update???

How do I do this?

View 3 Replies View Related

Updating Unbound Textbox On Form Per Record Viewed

Jan 23, 2006

Hey, I am trying to figure out how to update an unbound textbox on a form to reflect conditional data in other boxes when each record is viewed (pages works with reports but I cant find something similar with forms). such as if I had an unbound textbox that I want to = firstname+" "+lastname I would want for it to update it every time a user goes to the next record.. I can't seem to figure out a command or method that executes every time someone goes to the next record.. (and Im not too familiar with all the commands that come without a GUI).. thanks for your time

View 4 Replies View Related

Forms :: Way To Store Record Number In A Form Textbox

May 24, 2013

I have a Form with data entry property = No. If a user clicks the page down button accidently, this could move the form to the next record even when cycle property = current record. I want to create a macro that fires a message whenever the user clicks page down and moves to the next record.

Question1:Is there an event that is somehow linked to a user moving into the next record.

Question2: Alternatively is there a way I can store the record number in a form textbox. How can the record number be captured via a simple macro action ?

View 1 Replies View Related

Forms :: Datasheet View Textbox Fills With Same Value For Every Record?

Jun 13, 2014

Some background: I have a subform that is displayed in datasheet view, with an unbound textbox (field1) whose sole purpose is to pass the date and time entered into it to field2 (hidden, bound), and also display that info in this format: ddhhnn"Z" mm yy. The inputmask for field1 is 000000"Z ">LLL�0 which forces the user to enter the date/time using the ddhhnn"Z" mm yy format. I use field1's AfterUpdate event to convert its contents into a format (dd/MMM/yy hh:mm) that field2 can easily recognize as a date and time.

My problem: The only way I've figured out to get field1 to display field2's date and time is to use the subform's OnCurrent event:

Code:
Me.field1 = Format([Field2], "ddhhnn""Z ""mmm yy")

However, by doing that, whenever I click on a record's row the entire field1 column populates with the current record's field1 value. So, if I click on record 2's row, the entire field1 column populates with "101200Z JUN14" for every record. If I click on record 3's row, the entire field1 column populates with "111232Z JUN14" for every record. And so on and so forth.

How can I stop field1 from populating with the same value for every record?

View 3 Replies View Related

Forms :: Autoupdate Textbox Based On Previous Record

Jun 17, 2013

I am creating a database for an annual golf tournament. Part of this is to allocate players to play off together at certain times.

I have a form bound to a table called tblteeofftimes. This form has five fields (continuous form) - four of which are comboboxes whereby user selects each player for the record (who will play together). The other textbox has the tee off time. the first tee off time will be allocated by user eg 7:00 am.

My problem is I need to update each ensuing record with a new time slot at 7 minute intervals. Rather than have the user populate the form themselves I would prefer this be done authomatically as the user moves onto the next record.

View 12 Replies View Related

Forms :: Select Record In Combo Box And Populate Textbox

Sep 19, 2014

I am looking to have a combobox on a unbound form to select a product code (this i can do). However I want a textbox to auto populate with the description as well - both in the same table tblproducts - product_id, pcode, pdesc....

View 4 Replies View Related

Forms :: Refreshing Textbox If User Deletes A Record From Table

Feb 6, 2015

I have a form with a Count textbox. It's control source is a field named "Audit Count" in the table "DB Audits". The idea of the textbox is to display a running count of how many audits a specific auditor has completed that day. To do this I have the textbox set up with a default value of:

Code:
=DCount("[Loan Number]","DB Audits","[Auditor] = fOSUserName() And [Audit Date] = Date()")+1

Assuming I'm using the DCount function correctly, this is supposed to count the number of [Loan Number] records entered in the "DB Audits" table by the auditor (whose name is found using fOSUserName()) on today's date. So, for example, when opening up the form at the beginning of the day the Count textbox would read 1 and when the auditor clicked Save and New it would increase to 2.

The problem I am having is something I encountered while doing some random tests of the form. If an auditor submitted an audit (let's say the 1st of the day), the form correctly displays the next count as 2. However, if the auditor were to delete the record from the underlying "DB Audits" table while the form was still open, if they were to enter a new record, the Audit Count field would display 2 even though it should be 1 (since the 1st record had been deleted).

How can I have the Count textbox refresh whenever someone deletes a record from the table while the form is still open? I tried a Requery command using the AfterDelConfirm event but I couldn't get it to work.

View 6 Replies View Related

Forms :: Find Record In Table That Matches Textbox Input

Jan 5, 2014

I'm trying to build a search form.- Access 2007

I have a table (Table1), contains a 'part' field.

I wan to build a form with a blank text box (txtbx1) where users can enter a part description, this will search records in Table1>part and return a list of parts that match the textbox input.

Here's what I've done -

txtbx1 - property sheet - control source - part
event - on enter - ...

I've built an expression -

[Table1]![part] = [txtbx1]

hoping that this would match records 1n Table1 to txtbx1

View 10 Replies View Related

General :: Save Record Instantly When Text Entered Into Textbox In A Form

Aug 4, 2012

How do i save a record as soon as text is entered into the textbox in a form?I need it to save without moving on to the next form without having to click a button

Code:

If Me.Dirty Then Me.Dirty = False

but it doesnt seem to work

View 3 Replies View Related

Mandate Users To Enter Data In Textbox Before Proceeding To Record On Form

Nov 21, 2012

Any way (VBA script, etc) to make it mandatory for a user to enter data in a textboxes in a form before proceeding to the next record on a form? I know I am able to do this in the table by selecting the value "Yes" in the Required area in the General Tab but I was wondering if there is a VBA script you can enter it in a form instead.

On attachment is an Access Database in winzip. In the __Property form, I want to make it madatory for users to enter data in the County Shapefile Gross Acres, Township, Mineral Severance Tract, and Unit name fields before proceeding to a new record. If data is not entered in these textboxes for these field, then a person will not be allowed to go to the next record.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved