I have this probably ridiculously easy problem on one of my forms. i have a subform that has a combo box in it. but the field is not large enough... i've dragged and dropped and changed the field size and it still shrinks back to what it was before.
anyone have any idea why?
Hello,
Anyone know why my MODI printout code is shrinking the 2nd + pages? This is only happing with the vba printout. If I open the file right from Office Image Document and print it comes out fine. Below is the code I am using.
The c: emp est.mdi is an exsiting file.
I have also tried miPrint_Print and just printout and all do the same thing.
The document is 3 pages and only the 1st comes out normal the 2nd and 3rd page are very very small in the upper left corner. But if I print these from Image Document itself it prints fine on all 3 pages.
Code:Set MyDoc = New MODI.DocumentMyDoc.Create ("c: emp est.mdi")MyDoc.PrintOut miPRINT_ACTUALSIZESet MyDoc = Nothing
Thanks
Joe
I have seven (sub) reports put on to a large report. How can I get the reports to shrink or grow according to how much info they have in them. I have tried Detail - Can Shrink, Can grow - but this doesn't seem to work. At the moment I have them all lined up but they are all overlapping each other.
View 3 Replies View RelatedI have a report that has the addresses from the client and auditor on the same level. The address of the auditor is on the left side and the client on the right side. They have both the same layout:
Auditor - client
Attn auditor - attn client
etc.
When the Attn for the auditor is empty, it will show and empty space between auditor name and auditor address.
All the fields have the can shrink to yes, but if they are on the same level in the report, the one have text in it, forces the empty space.
Is there a workaround for this?
I have a continuous form with 4 text boxes
txt1,txt2,txt3,txt4
if txt1 has more than one line how to let it grow and in the same time the other txt boxes will grow to the same size
all the textboxes should have the biggest size
I did this but in report
I put this code in the event OnPrint
Code:
On Error Resume Next
Dim lngCounter As Long, dblMaxHeight As Double, i As Integer
dblMaxHeight = 0
ReDim strcontrol(10)
For i = 0 To 10
[Code] .....
Is there anyway to let this done in forms?
I have several comboboxes (6) on my form.How to populate these comboboxes with values depending on selected value in previous combobox.
Example.Lets say that you select value "Audi" in combobox 1, then available values in combobox 2 should be "A4","A6","TT" etc. and if you selected "BMW" in combobox 1, then available values in combobox 2 should be "3-series", "5-series" etc...
I have a form that currently uses a "catch all" table for listing available equipment to choose from for an equipment field. I call it tblEquipment. What I want to do is to make it so when I type a name in (1 of 35) in one field of the current record, the record source for the equipment field immediately looks at a different table that has equipment available only for that name. To do this I plan on making 35 different tables with limited data originally found in tblEquipment. I would call these tblEquipment1, tblEquipment2, etc. I do not use a sub form, nor do I want to.
So my questions are:
1) can this be done
2)If it can be done, how can I do it?
Hi everyone,
I have two combo boxes on the same form bound to a table. I want the contents of the next combo box to change based on the previous combo selection e.g
cboContinent cboCountry
Africa Zambia
Africa Congo
Africa South africa
Europe England
Europe Holland
If I choose Africa in cboContinent, I want to see only Zambia, South Africa and Congo under cboCountry and if I choose Europe I want to see only England and Holland
Thanks
Humphrey
I have a Suppliers database which contains a form that will allow me to place orders with Suppliers.The Main form has a combo box that allows me to select the supplier. The combo box is called SupplierID with the following:
Row source: SELECT Suppliers.SupplierID, Suppliers.CompanyName FROM Suppliers ORDER BY Suppliers.CompanyName;
The subform is called Stock Subform witha combo box called ProductID with the following:
Row source: SELECT DISTINCT Products.ProductID, Products.ProductName, Suppliers.CompanyName, Products.Discontinued FROM Suppliers INNER JOIN Products ON Suppliers.SupplierID=Products.SupplierID WHERE (((Products.Discontinued)=0)) ORDER BY Products.ProductName;
Event Procedure - AfterUpdate: Private Sub ProductID_AfterUpdate()
On Error GoTo Err_ProductID_AfterUpdate
Dim strFilter As String
' Evaluate filter before it's passed to DLookup function.
strFilter = "ProductID = " & Me!ProductID
[code]..
The Link fields are done on the Purchase Order ID (PONoID).What I want to achieve is to select the supplier from the combo box (SupplierID) on the main form and then the combo box (ProductID) on the subform to filter to only show products directly supplied by the Supplier selected on the Main Form.
I'm looking for a way to have a text box auto fill based on the selection of a combo box on the same form. I cannot use the method i find all over the internet of using multiple columns in the combo box and basing the text box on that because the combo box already has multiple columns being used to determine its own possibilities and other combo box possibilities.
I would really just like the text box to work like this, but im still kinda inexperienced in VBA...
If combo box is "F004-001", then text box is "237"
If combo box is "F004-003", then text box is "280"
I know how to add in an "after update" thing, but i do not know how to do If/then statements.
I'm have quite a difficult time getting a form in Access 2010 to perform the way I would like it to. I have multiple tables that I've created, and a query that contains the data from the various tables. I then ran the form wizard to select the data from the query that I wanted to populate in my form and I've added 2 combo boxes.
What I want to do:
1. I want users to be able to select a category in combo box #1 (example: "Bag")
2. I want users to be able to select a detail in combo box #2 based on the category they selected in combo box #1 (example: Combo box #1, "bag" would populate the following selections for combo box #2: "sandwich" and "tool")
3. I want users to then receive a list of suppliers that provide the product they have selected, either "Bag: Sandwich" or "Bag: Tool"
I have combo box #1 populating a list of categories already. However, I am not able to get combo box #2 to provide choices based on the selection chosen for combo box #1.
Let's assume we have 3 tables:
Order_Category (Order_Category_ID, Order_Type_Name) with 2 records:
1, Minor
2, Major
Order_Type (Order_Category_ID, Order_Type) with 4 records:
1, Book
1, Pencil
2, Car
2, House
Orders (Order_Category_ID, Order_Type, value) with 2 records:
1, NULL, NULL
1, NULL, NULL
2, NULL, NULL
I want to create a Multiple Items form presenting Orders table with two Combo Boxes:
1. A combo box to select Order_Category_ID.
2. A combo box to select Order_Type. When 1 (Minor) is chosen in the first combo box it should show Book and Pencil, when 2 (Major) is chosen it should show Car and House.
Examples in the Internet show how to do it on a 'single row' forms using the RowSource property. I tried to use a query like:
SELECT Order_Type
FROM Order_Type
INNER JOIN Orders ON Order_Type.Order_Category_ID = Orders.Order_Category_ID
WHERE Order_Category_ID = [comboBoxOrderCategoryID]
But it sets same values for all records in the Multiple Items form and it should return different values in each rows based on value in the first combo box (Order_Category_ID).
Here's the deal:
I'm an extreme newbie, I do not know access very well, nor do I know VBA, I do know PHP.
I have a for in access that has 2 user input fields, one for prodid one for shipid. I have a combo box that upon entering data into the previous 2 fields, it does a query against an MsSQL database looking for a record that has both. In any case there will only be 2 outcomes, either 1 record, or null. I would like to have that same combo box automatically use the result as it's value so that users don't have to check the box, because they won't, and so that the rest of my VBA will be able to function properly.
Can anyone assist?
Thanks.
Thanks in advance for your help.
I would like to set up rules/constraints such that the value selected in combo box A determines the available values in combo box B. For example, "Combo box A" is bound to the [PartnerType] field and "Combo box B" is bound to the [PartnerRole] field. Let's say that the two choices in Combo Box A are "LLC", "LP", and "Corporation". There are 5 possible choices in Combo Box B: "X", "Y", "Z", "Q", and "U". If a user selects "LP" in Combo Box A, I would like Combo Box B to only show choices "X" and "Y". And if a user selects "LLC", only choices "Y", "Z", "Q", and "U".
Similarly, I would like to set this up so that Combo Box B is not initially visible--it becomes visible when a user selects "LLC" or "LP". If a user selected "Corporation", Combo Box B would remain hidden.
I have seen a few articles here and there on using a combo box to filter records in a sub-form and to filter records in another combo box, but I am not getting anywhere. I hope someone can belp
Exercise 1
For this exercise, I have the following tables:
tblClients containing client names
tblProjects containing some project details
I want to set up a simple form, so that the user can select a client name from a combo box on the main form which filters the project detail records in the Projects sub-form.
Once the user enters project details, I want this info as well as the selected ClientID to be fed back to tblProjects.
Exercise 2
I have the following tables:
tblProjects as above
tblWorkstream containiig names of workstreams and some other details.
Every project has one or more workstreams
I have a form where users will enter hours worked on each workstream. They will first select Project from a combo box on the main form. This should then filter records to be displayed in the Workstream Combo box, before they can then enter hours.
Please let me know if you need me to explain any part of this better.
Thanks in advance.
ps. I am a novice, so I'm hoping to do the above using default MS stuff, not with complex programming!!!
Thanks
I'm an Access newbie and I'm having trouble restricting a combo box on a subform based on the selection of the combo box on the form.The combo box (Combo1) on the main form (FrmOrganisation) gives a list of companies, I want the combo box (Combo2) in the subform (SbFrmEmployees) to list people only from that company. I then have a subform within that subform that displays information about the employee.
View 3 Replies View Relatedi have a table with three column Named
1-State
2-City
3-Customer
on a form i m placing 3 combo box for each column how can i filter combo 2 from table after select value from combo 1
Hello
I have had a look through the forum and I am not sure if this can be done. I have a table. i.e. with columns Decsription 1, Cost 1, Description 2, Cost 2 Description 3, Cost 3 description 4, cost 4 etc.
I am looking to try and gave a combo box show this information as follows. I.e
Colum 1 on Combo; Column 2 on Combo
Description 1 Cost 1
Description 2 Cost 2
Description 3 Cost 3
Description 4 Cost 4
I want to be able to auto fill some fields on a form based on the combo box selection.
Has anyone done this before and can it be done.
Thanks
I'm trying to get one combo box control what tables are available from another combo box. Example, combo box (a) includes numbers 1-5. Selecting (1) makes the data in combo box (b) specific to that selection. Selecting (2) makes the data in combo box (b) something different (pulls data from a different table).
Can anyone help me with this? Thanks!
I have created a database that is used to track various programs that our organisation runs, and keeps a record of which Division the program is in.
at the moment I have a main form which has a combo box that lists Divisions, then I have a subform that has a combo box on it that lists the purchasers.
what I would like to do, is to have the Purchasers list update when a Division is selected in that main form, as depending on which Division is chosen the contents of the Purchasers list changes drastically.
Is anyone able to offer some assistance?
Hi all!
It's been a while since I've used Access, and I seem to have forgotten this.
I have a form which allows entry of Borrower's details. I have 2 combo boxes on the form.
They are:
cboBorrName
cboLoanSN
Once the user selects the name from the cboBorrName, I want the cboLoanSN to display all loans associated with the Borrower so that they can select the correct loan and add repayment details accordingly.
I have added the following SQL statement as the record source of cboLoanSN
Code:SELECT * from tblBorrower WHERE tblBorrower.fldLoanSN=[Forms]![frmBorrower]![cboBorrName]
I have also added the following code in the After Update event of cboBorrName
Code:Me.cboLoanSN.Requery
However, it doesn't work.
Can someone please help me out?
Thanks a bunch!
I'm trying to build a database for daily work. My work in daily basis I have to fill all condition for several items.
We have two areas, with two locations under each area, and three systems under each location and each system contain more than 500 items.
I created all tables and fill by all information:
1-Table 1: Area 1, Area 2, Area 3, Area 4, Area 5, Area 6.
2-Table 2: Location 1, Location 2.
3-Table 3: System 1, System 2, System 3.
4-Table 4: all items under System 1-1-1
5-Table 4: all items under System 1-1-2
[Code] ....
Last table will be LogBook which will be as follow:
date l time l area l location l system l item l Conition1 l Conition2 l Conition3
My question regarding to the form of the above table:
How can I make a combo box for area field and when I select for example area1 will appear only the locations which under area1 in location field, and when I select location1 for example will appear only the systems under location1 in system field, and when I select system1 one for example will appear only items under system 1.Combo box list will be based on the selection in previous combo box and so on.
I am trying to select a value from one combo box and on the basis of this selection the other combo box show only those values which have link to the value I have selected.
View 14 Replies View RelatedI have a continuous form which has 1 field in which is a combo box which has a list of names. Once you select a name, the next record down is available for selection. This is because my tables PK is a autonumber. How do i filter the records to only show the names which have not been previously entered in my above records.
View 11 Replies View RelatedI have a main form that filters data in a subform based on selections via combo box users make on the main form.
So I have the 'department' and 'manager's name'. If someone selects 'Human Resources' from 'department' combo box, then I only want to see the managers that are in the Human Resources departement when I drop down the combo box for 'manager's name'. Currently I'm seeing all the managers and a user can select a manager that is not in human resources and get no data returned. I prefer for him to get a list of those that are in that department only. The source of the combo box is a query.
I got it! Found here: [URL] ....
I'm having a little difficulty setting up a combo box to filter another combo box. I've actually got one working but the second one is giving me all sorts of errors. On the attached database, there's a form called frmAddNewRecord. At the top of the form there's a combo box which allows you to select a name and another combo box beside it which acts as a filter so only names from a certain section are shown (working fine).
The subform which is attached to this form and contains the training details, has another combo box which allows you to select a job...I've tried to add a combo box beside this to filter it but I can't get it to work.