Stop Form Going To New Record
Jun 27, 2006
i wonder if anyone can help with this problem i cant seem to work out.
i have a bound form linked to an orders table, including some required fields. when i use the navigation buttons of the form to scroll thorugh the orders i can get to the end where the form expects you to make a new order. but i have a button to add a new order.
i want to stop the user being able to go past the last record in the orders table. or enable them to get back to the last order. currently if the user goes past the last record (making a new order) there is no way to get back to the last record. using the navigation back button causes errors as the required fields are blank and access tries to save the order, thinking i want to make a new one.
i hope this makes sense.
i have tried setting the Allow Additions setting of the Form to No. but this causes problems when there is no data in the orders table. opening the form produces a blank form, showing no fields or buttons at all.
i would be greatful for any advice, maybe i am doing something fundamentally wrong?:confused:
View Replies
ADVERTISEMENT
Jun 27, 2006
i wonder if anyone can help with this problem i cant seem to work out.
i have a bound form linked to an orders table, including some required fields. when i use the navigation buttons of the form to scroll thorugh the orders i can get to the end where the form expects you to make a new order. but i have a button to add a new order.
i want to stop the user being able to go past the last record in the orders table. or enable them to get back to the last order. currently if the user goes past the last record (making a new order) there is no way to get back to the last record. using the navigation back button causes errors as the required fields are blank and access tries to save the order, thinking i want to make a new one.
i hope this makes sense.
i have tried setting the Allow Additions setting of the Form to No. but this causes problems when there is no data in the orders table. opening the form produces a blank form, showing no fields or buttons at all.
i would be greatful for any advice, maybe i am doing something fundamentally wrong?:confused:
View 2 Replies
View Related
Dec 4, 2012
I have a macro that opens up a form called SLA Complete Form - The macro then goes and examines two fields on the form to see if they contain data and if they do not then it displays a popup box with a message.
The form that gets opened up can have anywhere from one record to approximately a hundred records.
How can I get the macro to stop running when it hits the last record on the form without displaying an error message. I am currently using the next record feature in the macro.
View 1 Replies
View Related
Nov 13, 2013
I have created some control buttons using the built in functions of Access2007 and then using the script supplied here modified the control.
So far the controls can add new record, save record, exit form, open next form and close existing form, open previous form and close existing form.
My next question is when the user reaches the end of the form fields how do I stop the form from automatically starting a new record?
For example, I use the TAB key to move from field to field and when I tab out of the last field the form goes straight to the next empty record.
I want this to be a deliberate action performed by clicking the Add New Record button and not an accident of a key press.
The other thing is, how do I get the form to open with blank/empty fields and not at the first populated record?
Some of the data is updated frequently so the records need to be able to be edited but I need to prevent accidental editing of the existing records.
View 14 Replies
View Related
Nov 15, 2013
I am using Access 2013. I have a form with 2 subforms, each time the form is opened, the first record on both subforms are selected. Is there a way to turn off the record selector so no records are selected when the form opens?
View 3 Replies
View Related
Mar 10, 2006
I have a form that opens to a NEW record, all fine and grand. there are a few drop down choices, and modern users are using the scroll button to try to move up and down the list in the drop down boxes, but this action actually tries to move to the next record, causing an error as fields are blank etc (which is fine) but its confusing everyone.
the nav buttons are not shown on the form, so what can we do to stop the form trying to goto another new record?
the form is opened using a macro, where the action is OpenForm (view=form, data mode=Add and window mode=Normal) GoToRecord (record=new).....
View 1 Replies
View Related
Feb 25, 2006
Hi can anyone help please!
I'm writing a course registration Db. I have a have 3 tables at the moment tblContacts [ContactID], [FName], [SName], [Etc..] tblCourseRegistration[RegID] [ContactID][CourseID] and
tblCourses[CourseID] [CourseName] [Etc...]
These are all linked on a tabbed form. I have found that the same Contact can sign up for the same course twice. I need to stop this happening. Is there an easy way to prevent this or do I have to write a query that runs before the save command to prevent this?
Thanks in advance person with sore head!
View 7 Replies
View Related
Mar 25, 2013
On my form my Tab stops at a "New Record" button. After the "Enter key" can I make the cursor go to the first field in the form?
View 7 Replies
View Related
May 25, 2007
Hi
I need to know how to stop access from saving the record when the
subform query is on focus?
Thanks
View 5 Replies
View Related
Sep 11, 2005
I am writing a database with a number of tables with forms attached to each table. I have placed navigation buttons on each form to move to first, last, next, previous. I have set up the code associated with the buttons as "public sub" so it is available for each form to use.
This was working OK except that when I used the NEXT button at the last record it would open a new blank record & keep opening a new blank record on each click.
To over overcome this I put in an If statement to check if it had moved to a new record. To do this I used the following:
If Me!NewRecord Then ..... etc
Now I get an error "Invalid use of Me key word" I suspect it is because I am using ME in a public sub
How do I overcome the problem of moving passed the last record and still have the coding available to all forms?
The Code is below.
Thanks for any help.
Public Sub Next_Record_Click()
On Error GoTo Err_Next_Record_Click
DoCmd.GoToRecord , , acNext
If Me!NewRecord Then
' If new record move back to previous
DoCmd.GoToRecord , , acNext
' Send message
MsgBox "This is the last record", , "No More Records"
End If
Exit_Next_Record_Click:
Exit Sub
Err_Next_Record_Click:
MsgBox Err.Description
Resume Exit_Next_Record_Click
End Sub
View 3 Replies
View Related
May 10, 2006
I am on a Invoice Header record in a bound form. I want to stop the user from scrolling the mouse wheel down, and land into a new record.
The problem is that when a user moves the mouse wheel, he lands into a new record, and access skips all data validations in the first record, and just commits it. I want to completely disable the mouse wheel. I have disabled the pageup and pagedown keys, but don't know how to stop the mouse wheel from scrolling.
Please help.
Thanks,
Vinai
View 1 Replies
View Related
Nov 1, 2006
I am basically setting up a macro that will change the value for a field from "N" to "Y" for all records from a query. The macro works fine except for it does not know when to stop and gives an error message of "You can't assign a value to this object" after it has gone through all of the records and there are none left to change. The macro is set up like this:
OpenForm Action : This form is populated by the query and I set the Where condition to open records that don't already have a value of "Y".
SetValue Action : I use this to set the value of the field to "Y"
Close Action : I use this to close the form and save the changes
RunMacro Action : This is where the problem is. I use this to repeat the macro so it can go through the rest of the records that still have the field set to "N". I need to set the Condition or Repeat Expression so that it checks if all of the records have been changed. It either needs to check that all records have the field = "Y" or check that the macro is on the last record. Basically something that will cause the macro to not open itself again when there are no more records to be changed.
View 2 Replies
View Related
Apr 11, 2013
The charity that I work at has many volunteers.
When they enter data they use the tab key for movement to each field.
Can I have the Tab Key STOP on the current record and not proceed to a new record?
View 2 Replies
View Related
Sep 16, 2014
But I use one for creating new records in a table.
And one to View/Edit exiting records.
When I open an existing records, and tab through the fields. Once I pass the last field it creates a new record.
View 2 Replies
View Related
Apr 26, 2013
I am building a student register for a school for disabled children. There is a screen listing all students, one showing detailed student data chosen by #=IIf(IsNull([ID]),"(New)","Open")# clicking on "Open", one listing all the guardians, choosing a guardian by #=IIf(IsNull([ID]),"(New)","Open")# clicking on "Open", to diaplay Guardian details.
From the student list, I select and view student details, including a pointer to their guardian details. After selecting the first student details, and then viewing their guardian data, any subsequent student details and guardian details updates the prior guardian data with the next guardian's data.
How can I prevent the successive guardian details from updating the prior guardian table when it is exited? I view the guardian details using ADO recordsets populating a form. When I exit, it updates the previous record.
View 1 Replies
View Related
Dec 17, 2013
How do you prevent access from adding a new record when u input data in the current record or tab to the next field? My database is set up to open with a form where the user picks his name and then a week ending date once that is complete u open a new form where the name and date auto populate along with other fields to fill out such as job charge, charge type , times charged for each day of the week. But I don't want access to create a new record everytime the person inputs or tabs..... .
I have attached my database for better clarity!
View 9 Replies
View Related
Jul 25, 2007
Hi,
How can I stop user from closing the form if the mantory fields are not filled up? I try using gotocontrol but it is not working.
View 1 Replies
View Related
Nov 18, 2005
Hi I've been having this same problem for a while and I've had a bit of help here but none of the suggestions have so far worked.
Basically I need a way to stop people tabing through a sub form without entering data. The sub form has a check box that has to be checked (it can't be set as True as default) the required field doesn't work and for some reason the Enforce Referential Integrity on the join between the main table (tblCustInfo) and this one doesn't work either.
tblCustInfo = the main form
tblAgentData = subform
can anyone please help?
View 1 Replies
View Related
Sep 12, 2006
Hi there everyone,
Must be a really simple one, this one but can't seem to find the solution! :o
Can someone put me out of my missery and tell me how to make each form open in the same window instead of ending up with millions of open windows??!!
Thanks, Matt
View 6 Replies
View Related
Feb 20, 2005
Is there anyway to stop the user from beng able to move a form. I.e. as in change its position on screen.
I am aware that you can do this by setting the border type to "none". However, I want my form to have a title bar along the top, so I cant use this method.
Is there another way to do this?
Thanks in advance.
EDIT: Ive found some information on the "movable" property, but I am using access 2000 and cant get it to work.
View 7 Replies
View Related
Feb 20, 2006
Hi people. I'm having fun with this one. I want to open a form frmOldRec from a list on frmSelectOld, only if there is data. I'e tried code such as:
Private Sub Form_Load()
Dim rst As Recordset
Set rst = Me.RecordsetClone
If rst.RecordCount = 0 Then MsgBox "No Records logged in this service area"
DoCmd.Restore,
'close etc etc
End sub
But I haven't been successful.
As it stands it opens a blank form if there's no suitable record. How can I stop this happening please?
Cheers Barry
View 1 Replies
View Related
Mar 30, 2006
Hi
I have set up a tabbed form to preview data going onto a report. There are four sub forms each on its own tab. I have locked down the data on the sub forms.
However when I open up the tabbed form the focus seems to shift to the first control on the tab. Ideally I want all the data controls on the tab to remain without focus leaving only the tab controls and the close form control that can get a focus.
Is there any way I can do this, or am I not making myself clear?
It isn't a deal breaker but it makes the form look a tad ugly!
Thanks for any help.
View 2 Replies
View Related
Jun 12, 2006
Hi,
I've got a close button on my form as follows:
Private Sub exitForm_Click()
DoCmd.Close
End Sub
In the beforeupdate event of the form I have have following code to validate the forms fields:
Private Sub Form_BeforeUpdate(Cancel As Integer)
'Place an asterisk (*) in the Tag Property of the text boxes you wish to validate.
'Then in the BeforeUpdate Event of the form, copy/paste the following:
Dim msg As String, Style As Integer, Title As String
Dim nl As String, ctl As Control
nl = vbNewLine & vbNewLine
For Each ctl In Me.Controls
If ctl.ControlType = acTextBox Then
If ctl.Tag = "*" And Trim(ctl & "") = "" Then
msg = "Data Required for '" & ctl.Name & "' field!" & nl & _
"You can't save this record until this data is provided!" & nl & _
"Enter the data and try again . . . "
Style = vbCritical + vbOKOnly
Title = "Required Data..."
MsgBox msg, Style, Title
ctl.SetFocus
Cancel = True
Exit For
End If
End If
Next
End Sub
This validation works fine up to a point. If I try to close the form and a required field is empty, I get a message box asking me to fill in the data. The problem is that when I click ok to the message, it shuts down the form, so I have to re-enter all the data again. My question is how do I prevent the form from closing after clicking ok on the message box?
appreciate your help:)
View 1 Replies
View Related
Dec 19, 2005
Hi
I am a new user to Access. I created couple of forms using wizard, but when I view them, they show me all the available data by default. I want to stop this, if anyone can help me plz.
RMA
View 5 Replies
View Related
Dec 16, 2011
I have a button that opens a form based on a query, the query is filtered based on an input field. This works great except when the user typos what they put into the input field. Since the query pulls no records it just opens a blank form. I want it to not open the form and instead open a message box telling the user the data they entered is not valid and to try again.
View 1 Replies
View Related
Mar 16, 2014
I would like to know if there is any procedure to restrict/stop auto number increment for certain number of record count (say 50), then increment by 1 for next 50 records.
View 8 Replies
View Related
