Tabbed Form Label Blinking
Aug 12, 2006
I am trying to use a tabbed form, but the labels that are not associated with a text box or other control (like titles, etc) seem to aquire hyperlink properties which blink horribly when the cursor enter and leaves the label area. The two hyperlink properties are blank and I sure don't need them for anything. I tried associating the labels with a text box (which already had a label normally associated with it) and the hyperlinks and blinking goes away, but Access will only let me associate one label per control. When I have the same situation but not on a tabbed feature the hyperlink property is there, but no blinking occurs. I really - really would like to be able to use the tab style for these very busy forms. Can't imagine why a non-associated label must have hyperlink properties, or why this happens on tabbed pages and none others. GRRRR! HELP!!!
Thanks a billion!
Kye
View Replies
ADVERTISEMENT
Jun 22, 2005
I have a Text Box on a Form set to change color after an update changes the text to read “OK”. The Font changes from black to white and the background from white to red.
I want to make this blink/flash and need to have a button/action to stop/pause this for a set time (about 1hr.) so the update will not be able to start it blinking again.
I had made a splash screen to blink so you could see the Text Box that had the trouble and would stop when the Text Box changed from “OK”. Then I made a splash screen that came up and stayed on with the label that blinked until the Text Box changed.
The Form that I want to uses has the timer set to run an update and do not know if this will run on the same Form. Let me know if anyone has tried this and post a sample.
Thank you, JWT
View 1 Replies
View Related
Aug 4, 2005
Hi all, this is very uncommon...
I have a form. Inside this form i added a subform whic works perfectly. However, if i add a third subform, both subforms start to blink and i cant use them.
In the form i have information about a task (primary key: change_id from newchange table). In the first subform i have information about subtasks (primary key: change_id2 + subtask from change_desc table) and in the new subform i have a trail log of the ticket (primary key: historyID from history table).
any help?
View 9 Replies
View Related
Mar 26, 2008
Here's one for you guys:
My vision-impaired staff are having trouble seeing the blinking caret when they tab over to the next field in a form. Is there a way to highlight the newly-selected field instead of just having a thin blinking caret to guide the way?
View 4 Replies
View Related
May 13, 2014
I have a single text box with a vertical scroll bar being used as a user guide. The Locked property is set to Yes so no user input can be made.
How do I prevent the blinking cursor from appearing?
View 2 Replies
View Related
Apr 15, 2005
I have 7 tabs on my frmQuestions. They all the same layouts (see attached). Each tab has its Save_Button (e.g. CmdSave1, CmdSave2, ... ,CmdSave7). I do not want to write the same procedure on each CmdSave1_Click(), CmdSave2_Click() ..., CmdSave7_Click(). Are there any alternative ways to do this such as concate the string or ?
Thank you very much!
View 7 Replies
View Related
Oct 17, 2004
When I load my tabbed form, it always scrolls it down a bit and cuts off the tab. The user has to scroll up to show the tabs. I have tried any number of things and cannot get the form to open with the tabs showing. Is there a setting I am missing??
View 7 Replies
View Related
Feb 6, 2006
I am very new to Access and am designing a multiuser database with tabbed forms. One of the tabbed forms has 7 tabs; the first tab contains the part number and other information about a product and the remaining 6 contain additional information about that product. Is there a way to have the part number field/control remain visible when the user changes tabs, ideally without using VBA?
View 2 Replies
View Related
Aug 15, 2006
If I have a tabbed from of say 3 tabs, can I use each tab to populate 3 different tables or can each tab only populate one table, hope this is clear.
I have 3 tables
a) General
b) Process Design
c) Mechanical design
By putting the tabbed form on a plain master form, I have to select one table for the record source for the master form, thus it would appear is the only table I can populate. :confused:
Thanks in advance
View 3 Replies
View Related
Jan 5, 2007
Hi folks,
I've got a questionnaire which has about 80 fields in 5 sections. all sections are linked to a person Id - which is the unique identifier.
I'm thinking that a tab form is the way to go in putting this form in Access in order to facilitate data entry. Is this the best way or is there another way to accomplish this task?
Does anyone have a sample form that I can modify to meet my needs?
Thanks
Will.
View 11 Replies
View Related
Feb 25, 2008
I have a Tabbed form where one of the tabs shows about 20 rows of a table. Another tab shows a single record from that table with all the fields for that record.
I want to be able to move from tab to tab and and stay on the same record (hopefully that's clear).
What is the cleanest approach... any suggestions?
Thanks
View 12 Replies
View Related
Feb 20, 2008
Can you Filter a Tabbed Form?
The menu selection is dimmed for some reason.
Thanks
View 1 Replies
View Related
Apr 13, 2005
I have been using a calendar control on a subform and have now split the data into a tabbed form with 4 subforms. The calendar is now entering the date selected into the first record of each subform instead of just the one on the subform that has the focus.
Do I need to add the calendar control to each subform now or is there a way to reference the correct form in my current code?
Private Sub Calendar_Click()
' Enters the selected date into the DateCompleted field
Forms![Training]![ElectiveTrainingSub].Form.[Date].Value = Me.Calendar.Value
Forms![Training]![CorpReqSubform].Form.[Date].Value = Me.Calendar.Value
Forms![Training]![XOGReqSub].Form.[Date].Value = Me.Calendar.Value
Forms![Training]![Recommended Training].Form.[Date].Value = Me.Calendar.Value
I have tried If Me!TabCtl159 = Me.Page160 (first tab) Then
'enter date into that record
with no luck
Any ideas would be appreciated as always!
Thanks,
Toni
View 5 Replies
View Related
Mar 30, 2006
Hi
I have set up a tabbed form to preview data going onto a report. There are four sub forms each on its own tab. I have locked down the data on the sub forms.
However when I open up the tabbed form the focus seems to shift to the first control on the tab. Ideally I want all the data controls on the tab to remain without focus leaving only the tab controls and the close form control that can get a focus.
Is there any way I can do this, or am I not making myself clear?
It isn't a deal breaker but it makes the form look a tad ugly!
Thanks for any help.
View 2 Replies
View Related
Jul 10, 2006
Tabbed multiple-page form
I have created a tabbed multiple-page form, consisting of two pages.
On one-page forms my Access is configured in such a way that, ctrl-pgDwn gets me to the next record. I want to use this on the multi-page form as well.
But I always want a new record to start with page 1, and then click forward to page 2 if required.
At present ctrl-pgDown always takes me to page 2 of the new record if I start from page 2 of the previous record (and correspondingly from page 1 to the next page 1).
Question 1:
How can I go to page 1 of the next record regardless of where I am in the previous record? (with one key-stroke)
Question 2:
Is there a way of moving through all pages of each record with the same keystroke, thus:
Record 1: pg 1, pg 2,
Record 2: pg 1, pg 2
Thanks for your help.
Adrian
View 1 Replies
View Related
Oct 12, 2006
What is the syntax for defining the tab that has focus when a tabbed form is opened under various situations?
View 2 Replies
View Related
May 5, 2015
I've set hyperlinks to a couple of forms using the hyperlink address in properties. All works fine, and I've done it this way because the cursor changes to pointy hand when hovering over.
However, I need to navigate to a tabbed form in a main form.
Is there a way of doing this? I've been searching all sorts, and the most probable is to concatenate the destination?
description##Page1#page2... or something like that?
Is this correct?
What ever I've tried doesn't work, this includes ...
adding the main form destination to Hyperlink Address, and tabbed form in the SubAddress (Can't find main form)
Using the hyperlink builder. (Can't find anything)
Objects in this database (Only one form).
View 4 Replies
View Related
Sep 28, 2014
how to populate a tabbed form with a different record on each tab?
View 3 Replies
View Related
Oct 6, 2013
I want to have a navigation Form where the top tab will show the main Customer, and in the same tab also a sub table with chosen contact information.
With that top tab chosen, I want to chose left tab wich shall open (in this example) the phone number of that contact.
I provide a PDF with a few pictures of tables, relationships and how I want the forms to look.
View 5 Replies
View Related
Mar 10, 2014
everything has been working perfectly except for date diffs.I am simply using an unbound text box with a date diff as a calculator of sorts, which meets the form's purposes. Everything works fine when the two dates are on the SAME tab using the formula ' =DateDiff("d",[DOB],[date of treatment]) ' entered in the textbox.
The number of days between treatment and DOB pops up immediately.
However, when trying to create a second date diff between two source text boxes on SEPARATE tabs, (i.e. DOB on Tab 1, and date of treatment and the unbound date diff calc box on Tab 2) the date diff does not work unless the form is opened, and closed again. As in, the only time the number of days pops up is if the form is closed and opened again.
View 3 Replies
View Related
Jan 22, 2014
I have a form which consists of four (4) tabbed sheets. The first sheet is the main form and the other three sheets are the linked subforms.
Pressing the tab key on the keyboard navigates from field to field in each individual form; however, I would like that when I get to the last field of each form, pressing tab moves to the next sheet or the first field of the next subform.
The problem I am getting is that when I get to the last field of the main form and/or subforms, hitting the tab button creates a new record in the specific form, which I do not want. I want to just tab to the next subform.
View 14 Replies
View Related
May 31, 2015
I have an unbound form with 2 tabbed Controls on it.On the first Tabbed Control my command button code works but not for the 2nd tabbed control. Although the command buttons themselves work as far as going to the appropriate record.
What I mean by this is that I use code to enable/disable the command buttons depending on what record you are on.
Example: If there is only 2 record, the other command buttons will be disabled, Do I have to refer to the Tab Control ?
View 1 Replies
View Related
Sep 11, 2014
If I have a field in a tabbed form (the form has pages), can this field be moved from a tab to another programatically?
The form is called "ProjectMain". The field is called "Lenght" and the page (form tab) it is on is "specs1". Sometimes I need to have this field in the page (form tab) "specs2"
View 3 Replies
View Related
Nov 17, 2011
I have an application where I have developed a tabbed user input form with several tab pages to populate several tables with data using the master/child linking philosophy. There is one subform in particular that has two combo box fields that are related. I have them both set up to display value choices based on an undelying query. I want to restrict the scond box's choices based on the choice made in the first box and have written the following code to be applied after the first combo box is updated.
Private Sub RteGroup_AfterUpdate()
Form_Routing.OpType = Null
Form_Routing.OpType.Requery
Form_Routing.OpType = Form_Routing.OpType.ItemData(0)
End Sub
This effectively limits my second combo box choices based on the selection of the first box. It works fine if I run the subform individually but if I run it as part of the master form in tabbed mode I get an "Enter paramter value" dialog box asking for the value of the first combo box. it appears the requery is not functioning under the tabbed mode.
View 9 Replies
View Related
Feb 1, 2005
I have a client using an access DB that I have built. It was built using Access 2000 and he is running it on Access 2003. The problem is that when he opens one of the forms which is tabbed and he moves to the second page when he moves the mouse pointer over some hyperlink buttons the background colour ,which is normally blue flashes to yellow. Every other user working with 2000 does not have this problem. I cannot find the reason. Can anyone help please?
View 1 Replies
View Related
Dec 5, 2006
Hi all
This isn't the standard problem with DTPickers & Tab to which I've found lots of references!
I have a form with a Tab control, each page of which has a subform on it. There are several MS Date & Time Picker (6.0) controls on each tab. My problem is this: whenever you change tab when one of these DTPickers has the focus, you then can't type text (into a text or combo box, for instance) on the new tab until you have been into and out of another DTPicker control! (The KeyPress etc events do get triggered though). Once you've selected a DTPicker, you can then select another control and type text in OK.
The forms/controls aren't bound if that's relevant. It may be that the problem is caused by moving between subforms rather than between tabs.
Has anyone else had trouble with this? Is it a bug or expected behaviour (though I can't see why it would be)?
And most importantly, how can I get around it? Hope someone can help.
Dave
View 1 Replies
View Related
