Text Box Alignment
Nov 20, 2006Hi All
I dont have room on my form to read a text box from left to right so can it be rotated? so i read the text from bottom up as you can do in word text boxes or excel cells?
regards in advance
ADVERTISEMENT
Vertical Text Alignment
Feb 15, 2006I have a series of Unbound control boxes in one row. some text extend to two lines and I want everything to be centered both horizontally and vertically.
Can't figure out how to vertically align the contents of the controlb boxes...
Form Text Alignment
Nov 24, 2004I have created a form and want to turn the text in a header to a vertical read. I have tried all I know even pasting from excel and it just stays horisontal? Any help would be great.
View 2 Replies View RelatedFormat/text Alignment In Listbox
Jun 15, 2006I have a multicolumn listbox on my form. It works, but the second column is an amount, and I would like that column to be right-adjusted. Is there a way to do that?
Thanks,
David
Reports :: Text Alignment Between Computers
Jan 17, 2015I have a report that was created on my computer. When this report is opened on other computers (2 that I've tried) the text alignment is way off. Originally I thought it had to do with printer margins dictating something but that is not the case as the margins remain identical on all computers. It's not a font issue because it's Arial which all computers have. The text is written inside a "label".
View 5 Replies View RelatedGeneral :: Alignment Of Text In Form Fields?
Jun 24, 2013I have a form with many fields on it. For some reason some of the text in the form fields don't line up vertically with other text even though I have aligned them to the grid and to each other. I have Access 2013.
View 14 Replies View RelatedCentre Alignment
Jan 23, 2006G'Day again everyone,
I would like to justify everything so it is in the centre of the cell in the datasheet. Can this be done?
Also is there any way that you can wrap text in a text box?
Thanks a lot - Elliot
:confused:
Alignment In Msgbox Forms
Dec 8, 2006is there any way you can align text and data within msgbox's, with vbtab etc.
i suppose its a matter of forcing several text strings to occupy a similar length of screen real estate.
can you achieve this in a msgbox?
Numeric Fields Alignment In A List Box
Feb 2, 2005While using list boxes i noticed that numeric fields were getting left aligned in the columns. Is there any way to get them right aligned ?
View 2 Replies View RelatedForms :: Creating Tabbed Form In Access 2007 - Control Alignment?
Mar 29, 2013I'm creating a tabbed form in Access 2007, and in the first 3 tabs, when I dragged the field controls onto the form, they stretched to the width of the form and all stacked nicely underneath each other.
Now on the next tab they are coming out as much smaller. I don't want to stretch them to fit as I want them a uniform size and I just want to find how to get that setting back! I've been messing with the anchoring buttons to what seems like no avail!
General :: Changing Column Colour In List Box - Alignment For Cells Data
Jan 7, 2014How can change column color in list box and also how to make alignment left or right for cells data.
View 1 Replies View RelatedForms :: How To Populate Bound Text Field With Text From A Unbound Text Field
Mar 22, 2014I have 4 fields that are unbound on a form. img1 img2 img3 img4..When these are entered they are all combined and autofill another unbound textbox = imagename.. what i would like to do is from this unbound textbox 'imagename' ..i would like to populate a textbox that IS bound called FileName
[Event Procedure]
Private Sub imagename_Click()
Me.imagename = Me.FileName
End Sub
Using Rich Text Instead Of Normal Text In A Text Box?
May 24, 2012In my form's text box I have noticed that I can;t write paragraphs ie use the TAB key to start a new line. If I use rich text I assume this will be possible. But are there any disadvantages to using rich text?
View 1 Replies View RelatedModules & VBA :: Moving Rich Text From Access Memo Field To A Word Text Box
Jul 24, 2015We need to move rich text from an Access memo field to a Word text box. So far the best Ive been able to come up with is in the code below. In this code pprs!What is a record set field of a table memo field that is bound to a text box enabled for rich text. The rich text seems to be stored as html as so I can get word to convert it by enclosing it in html tags.
Dim What As Word.Shape
Set What = doc.Shapes.AddTextbox(msoTextOrientationHorizontal , doc.PageSetup.LeftMargin, 225, 534, 0)
Dim sPath As String
sPath = "G:Temp.html"
Open sPath For Output As 1
Print #1, "<HTML>" & pprs!What & " </HTML>"
Close #1
What.TextFrame.TextRange.InsertFile (sPath)
Reports :: Splitting Single Field Into Multiple Text Boxes Or Multiline Text Box
Jun 4, 2013I have a single field in a table called "Client Contact", where users enter a semicolon between the name, address, and city state & zip. My reason for this was so we could copy client info with a single copy and paste (like from an email). But, on the final report, it needs to have these three parts split up into different lines, or even different textboxes. I can't find a way to do that.
View 1 Replies View RelatedForms :: Display Row Text From Subform Column In Unbound Text Box Of Main Form
Jan 6, 2014My database has Main form and a Sub form. On main form i place one unbound text box named investigations. In subform of which datasheet there is a column named TestCode. I want unbound text box (Investigations) to display row values which selected in a column (TestCode) of subform.for example:Investigation field should display "CBC,HB,ALP".
View 5 Replies View RelatedA Query To SELECT A Columen Within An Interval Which Conatains TEXT+DIGIT+TEXT
Dec 28, 2006I have a column which contains "text digit text" as "AAA 222 BBB". The numbers of letters or digits can vary.
I need to SELECT the column which contains digits in a specific interval. For Example I have
"DFS 673 JKK"
"A 3454 LJLJ"
"SD 854 JKLJD"
I need to SELECT the column which contains 600 < Digit < 700 the result of the query in this case would be "DFS 673 JKK" because 673 is between 600 and 700.
Thanx for any clue or suggestion...
Modules & VBA :: Pasting CSV Data Into Text Box And Copying It To A Series Of Text Boxes
May 13, 2014I have a form on which there is a series of text box controls relating to different frequencies. At the moment I enter a value in to each of these manually.
However, I would like to have an unbound text box where I can paste in all the values (6 or 8 of them) from excel and then press a button and they would be copied in to the individual boxes.
So far I have my design:
I'm not sure where to start with regard to the code as I don't know how to handle delimited text - is it column delimited in excel?
I imagine some sort of loop, such as a do until will be required but again not sure.
General :: Text Box On Report To Autofill Using Fixed Text From A Label On Different Form
Jun 23, 2015I am using Access 2007 and 2010. I would like a text box (or label) on a report to autofil using fixed text from a label on a different (closed) form.
View 8 Replies View RelatedModules & VBA :: Text File Split Into Table - Find Text In Recordset
Sep 5, 2013I have some vba where I'm importing a text file and splitting it out into a table. For the most part its working just fine.
But I have a line of data that I need to pull out the string right after "Old" - Murphy and right after "New" ZMurphy
Acc# : 111111 This is test data, Person : 22222 Old Murphy New ZMurphy
I'm thinking Instr() could do this but I'm unable to get it to work.
I am using Access 2010...
Forms :: Change Text Color On A Form If Text In Field Contain Certain Word
Jul 12, 2013I have a Form Display Data in my Access Database, which is working really well. However, users was asking if there is a way we can make Font Color Could/would change if The text in A field or Any field in my display form contained the word "SAD or MAD". Is there code for such thing in display form?..
View 3 Replies View RelatedReports :: Find And Replace Text Across Many Text Boxes In Report Design
Jan 30, 2015Is it possible to use find and replace to modify text in report design - or else is there something else I can do to get the same effect? I have a really useful report and I want to modify it for use with a different dataset. To do that I will need to change the text in over 150 text boxes. I have seven different fields which each occur over 20 times in the control source formulas in the text boxes, because they are used in different ways in different calculations. If this was excel I could do a simple find and replace to change e.g. every reference to fieldname OLD to fieldname NEW, but I cannot see how to do that within access report so am haveing to click on each text box in turn, go to properties and edit the text box .
I am trying to switch to a more general naming system in the modified report so then I will be able to assign data with the required fieldnames for the report within a query. But the report I am starting with has field names based on years 2013, 2014, 2015 etc.I want a quick way to change each reference to those field names to my more generic new field names.
DLookup To Display Date In Text Box On A Tab Control Where Criteria Is Text Field
Apr 15, 2014I'm trying to pull a date from a table into a text box on a form tab control using DLookup and I just can't figure out what is wrong with my DLookup expression:
=DLookUp("DateOrdered","tDateOrdered","PrNumber=" & [PrNumber]) ----- (DateOrdered is short date, PrNumber is text, db is split Access 2013)
Whats missing in this expression? I've tried every criteria variant I could find but to no avail.
Can You Make Just One Part Of The Text In A Text Box Bold Or A Different Font Size?
Aug 20, 2004Is there a way to make just part of the text in a text box bold, or to use different font sizes in the same text box?
Something like this:
---------------------------------
Heading in bold: description in regular (not bold)
(a smaller height line used as a line space)
Another "normal" line
a larger height line
a normal line....all in one text box!
---------------------------------
One thing I'd like to be able to do is to specify the line height of a blank line in a text box. I'm using carriage returns created with: Chr(13) & Chr(10). I could see defining the font size of a hidden character, but I'd need to know how to assign a font size to a piece of the text in a font box.
Forms :: Text Box Search On ID And Populate Other Text Boxes In Same Form
Nov 12, 2013I am trying to search on EmployeeID field and populate corresponding data like EmployeeName, EmployeePay in other text boxes in the same box .
In my Unbound Form I have three unbound Text Boxes and one Command button:
txtEmpID
txtEmpName
txtEmpPay
cmdFind
In my table EMPLOYEE i have three fields
EmpID -- Autonumber
EmpName -- Text
EmpPay -- Text
Forms :: Gray-out / Disable Text Fields By Checking A Text Box
Nov 21, 2013how can i disable a textfield or two in a form when the textbox is unchecked also how do i add a default value for it while the textbox itself is disabled, can i get away with it by adding a default value on the textbox?
View 14 Replies View Related