hi, i have list box and the source coming form Query. i want when i click on
one in list box want it will show [faults] field in textbox from query
the field [faults] is a memo can someone help me
__________________
David
I have a button that when I press it it goes to new screen where I can add new data in, and then save it.I have 10 texboxes in this form, how can I when press the button to add data let it on 3 texboxes show info eg. 4321MAG01- and when I am on the new form I can change or add to it. eg 4321MAG01-123
View 6 Replies View RelatedIn the past a Teacher would manually create a Form (Student Form) containing Student information, (Name, Gender, Birthdate, Homegroup) as well as additional issues on the student. This would all be saved into a table.
I would like to change this manual process of typing in individually to each text box, therefore, I have been able to run a report from a external program that obtains (Name, Gender, Birthdate, Homegroup). This saves as CSV and I am able to import into a separate table within the database.
This works no problem.
What I have set-up is a form that contains a listbox this contains the Student name and Homegroup from the imported table contents. Again this works fine.
What i would like to do is when a student is selected from the listbox and dbl clicked on, how can i make information (Name, Gender, Birthdate, Homegroup) populate the textboxes in the Student form that the teacher previously used? could this be an update query where the imported table information will then go into the Student form? If so, how can I tell the dbl click of highlighted name is the data i want to populate?
I have an access form which i have turned of menus, navigation and shift key. What I am looking for is to have buttons on my form to allow users to create and delete queries from my form. I already have a listbox that shows all the queries and runs them when a user double click on them.The codes needs to run in access 2007-2013 in both 32 & 64 bit versions.
View 3 Replies View RelatedMy problem is if there is no FaultTotals nothing shows up. I would still like for the Four Columns to show data and have a 0 in the FaultTotals.
How can I accomplish this?
In a nutshell I am totaling all Cosmetic Faults based on the SystemGroup CTWT and a Date Range. If there are
no Cosmetic CTWT Faults for the DateRange I want a zero. The query works great as long as there is at least
One FaultTotal for the Date Range.
SELECT "1-3" AS Truck, "Cosmetic" AS Category, WorkUnitsFaultsMainTBL.SystemGroup, Count(*) AS FaultTotals
FROM WorkUnitsFaultsMainTBL
WHERE (((WorkUnitsFaultsMainTBL.FaultCategory)="Cosmetic") AND ((WorkUnitsFaultsMainTBL.TodaysDate)
Between [Forms]![Queries_ReportsFRM]![StartDateTxt] And [Forms]![Queries_ReportsFRM]![EndDateTxt]) AND ((WorkUnitsFaultsMainTBL.BuildID) In ("E010","C809","F001","C810","F187","A910","M173","M174")))
GROUP BY WorkUnitsFaultsMainTBL.SystemGroup
HAVING (((WorkUnitsFaultsMainTBL.SystemGroup)="CtWT"))
ORDER BY Count(*) DESC;
I have a list box called "product list box" based on a query called "searchqry", i also have another listbox called "type list box" , how do i get the type list box to only show "types" based on the section in products list box?
View 1 Replies View RelatedI have a access 2010 file, with 3 tables.
On my form I have a tape Textbox where I put tape numbers in that is on a other table inside my access file (for now I just type a tape number in), then save the info to other table also inside access file.
I want to know how can I make it that if I put a tape number in the textbox, it must look at the table for tapes, and if the tape number is not in the tape table, it must not let me use the wrong tape number that is not in the table for tapes.
Hi there
This im sure is a easy question but I am just trying to learn access so I am having a few problems.
I have made a form that contains 2 comboboxs and a listbox.
How can I use the 2 combobox to filter a table and to place the information into the listbox.
Is it possible to use either 1 of the combo boxes or both to get the filtered result.
Any suggestions would be great!!
TIA!
Ok I saw this posted up in the forum but it was not explained.
I have a Query which asks for a parameter before giving an output.
I have a report that uses this query to display the information.
Ok what I am trying to do is create a form that has a textbox and I enter the parameter's information in that textbox or textbox. How do I send the information to the query?
The reason for such a thing is people tend to not follow the set guidelines for putting stuff in a parameter box. So what I decided to do was set up a calendar form which a person has to physically choose the date from the calendar and this leaves no room for real error. My problem is I can get the calendar information to the textbox or textboxes but can't figure out how to code the button to send the textbox information to the query & parameters & report, etc...
Can someone please help me out of this situation? or point me to a starting point?
I have a list of companies in a table which Is being accessed through a list box. I wanted the user to be able to double-click on the name of a company from that long list and then for that selection to show up on an adjacent shorter list box which in turn will be used for a search. How can I do this? Another option would be to drag and drop the name from on list to another.
View 14 Replies View RelatedI have a form which contains a textbox called Expire_Date.
When the form is running, the contents of the [Expire_Date] txt box triggers
Some vba to populate another textbox [Flag] with "Valid" or "Expired" based on the date in [Expire_Date].
Textbox [Flag] is conditionally formatted but will only change if you click on the [Expire_Date] field.
Is there a way to use vba to click this field for each entry as there are multiple?
I have a form where I display the client's information and a series of checkboxes showing which services have been registered to them (ex. telephone, internet, cell phone (all info is held in separate tables with client id as the foreign key...).
For instance: I have a working query that pulls the client's id from the form to search the Cell Phone Table to see whether the client has a cell phone registered to them or not. How can I get that to translate into the checkbox on a form?
It seems so simple, yet the solution isn't presenting itself.
Any help is appreciated.
This is probably failry simple if you know what you're doing, but I don't know what I'm doing....
I have a form (Purchase Orders) and on that form there is a search button to allow the user to search the customers table by customer name. When the user clicks the search button a search form opens and the search results (customer number, first name, last name) populate a list box named "lstCustInfo". How can I set the list box double click event to return the customer number, first name and last name to the Purchase Orders form? To make it even more complex I would like to return the data in two fields: customer number and LastName, FirstName. The problem with returning the results in two fields though is that I need to be able to break it into three to save it in the customers table because the table has a place for Customer Number, First Name and Last name.
Does anyone have any suggestions? Is there a better way to do this than returning 2 fields and having to break it back into 3 to store?
Hi everyone!
First, I want to say I would REALLY appreciate any help I could get with this problem. Let me lay out the details.
I DO NOT, DO NOT, DO NOT know the first thing about programming for ms access. I am an absolute novice, no exaggeration at all. I was a liberal arts major in school!!!!!
Here's the thing: being adventurous and all, about 2 years ago a co-worker and I were fiddling with databases to try and help out our employer keep track of dispatching his equipment for his business. With a little too much time on our hands, before we knew it, our database became fairly complicated, for such novices. A kind gentleman on this forum did us an enormous favor, and programmed a search form for our database. you could enter any or all of the id #'s for various equipment, and it would pop up in a list box. Double-clicking the listbox would open the particular record you were looking for.
Fast-forwarding to now, I'm trying to create another database to keep track of our inventory while while various equipment moves in and out of our yard. I have tried using the old search form as a foundation to create a similar search form for this db. I think I actually have it (kind-of) working! You type in a container number, and the record should pop up. which is a miracle all its own.
problem is, is that when you doubleclick the selection in the list box, I receive the following error:
"Run-time error '3075':
Syntax error (missing operator) in query expression '[ShipID] = '.
I click debug, and visual basic brings me to:
DoCmd.OpenForm "Inventory Table Form",,, "[ShipID] = " & Me.lstInfo
I don't know what to do! I'm sure it must be something painfully simple or obvious, but I'm really stuck & would appreciate any help.
Also, I would really appreciate any advice on this: I'd like to also be able to search by chassis # in addition to container number, but i don't know how to do it. no big deal, though. THANKS SO MUCH!!
p.s., I've attached the db. please let me know if you can open it ok
i will show you my list box code. i would like to make it possible for my user to double click on an item in the list and it opens that record in my 'zEnquiry' form (which has the correct named fields to display the data already)
i had some double click code but i deleted it, and now ive forgotten which post i found it in.
here is the code for my listbox
Private Sub QuickSearch_AfterUpdate()
DoCmd.Requery
Me.RecordsetClone.FindFirst "[Enq_Forname] = '" & Me![QuickSearch] & "'"
If Not Me.RecordsetClone.NoMatch Then
Me.Bookmark = Me.RecordsetClone.Bookmark
Else
MsgBox "Could not locate [" & Me![QuickSearch] & "]"
End If
End Sub
In my form, when a button (cmdContactedToday) is clicked, a text field to the left (txtDateContacted) is updated with today's date.
However, before this happens, I want the the current date in txtDateContacted to get stored in another (hidden) text field (txtPreviousDate)
Then when another (undo) button (cmdUndoDate) is clicked, the date in txtDateContacted should get replaced with the date in txtPreviousDate.
I've made it as simple to understand as I could.
I have a textbox with about 400 characters, I also have 5 textboxes next to it. I want to click a button and I want to transfer the characters to the other textboxes 208 characters at a time.
View 3 Replies View RelatedOk, nobody chew me out... I know there's over 500 posts regarding calendars on here because I've read just about every single one and haven't found any answers yet. All of the posts that vaguely resembled what I'm looking for had no replies.
Here's what I'm trying to do:
First I've got 4 tables, each has different data including a start date, start time, end date, end time and description. Each table pertains to a completely different subject. The tables are already populated (imported from excel).
I've got a form with a calendar control (Ms Cal 7) in it... and that's about has far as I have gotten.
I would like to be able to open the form and have the calendar show all events for the current date (i found how to make the calendar show the current date, it's just populating the text boxes that I'm having a problem with).
So, here's how I would like it to work...
When the form is opened, you can click on a specific date (or don't click anything and it shows the current date). Then the textboxes show the info for that date.
Example:
Calendar = 4/20/2005 (Calendar control here)
Textbox1 = select from table A where subject="codereds" and start date = calendar control date
Textbox2 = select from table B where subject ="codeblues" and start date = calendar control date
Textbox3 = select from table C where subject="codegreens" and start date = calendar control date
Ok, anybody got a clue on how I can do this because I've had no luck finding it anywhere.
Thanks ;)
How do I return the Column Header Text on Right Click of listbox?
Thanks
the user searches records and they are filtered..http://www.londonheathrowcars.com/searchform.jpghttp://www.londonheathrowcars.com/searchquery.jpgand when they double click i want the record to open in this form..http://www.londonheathrowcars.com/showform.jpghttp://www.londonheathrowcars.com/showquery.jpgtrying to put this code on my listbox but gettin the openform cancelled 2501 error on the bold line.. anyone see why?Private Sub QuickSearch_DblClick(Cancel As Integer)Forms("searchform").SetFocusForms("searchform").RecordSource = vbNullStringDoCmd.OpenForm "showform", , , "[jobref] = " & Me![QuickSearch].Column(0)End Subnote:on the search form.. the form has no record source.. the listbox has the record source of the searchquery..also on the show form.. the form has the record source of the showquery.
View 8 Replies View RelatedI want to double click on one of listbox item and change it without opening any other form.
View 6 Replies View Relatedi have a form that there is a list box inside that. after selection of items (usually 20 items) and right click the mouse on items it should open another pop up form,the problem is after right click selected items will be unselected except one item that there is mouse on that. how can i prevent list box from deselecting items after right click .
the code for mouse right click is like below:
Private Sub ItemList_MouseDown(Button As Integer, Shift As Integer, x As Single, y As Single)
Const RIGHTBUTTON = 2
Dim udtPos As POINTAPI
Dim frm As Access.Form
If Button = RIGHTBUTTON Then
Set mp = New [*clsMousePosition]
GetCursorPos udtPos
DoCmd.OpenForm "frmshortcut"
DoCmd.MoveSize udtPos.x * mp.TwipsPerPixelX, udtPos.y * mp.TwipsPerPixelY
Forms!frmshortcut!txtparameter = Me.ItemList.Value
End If
End Sub
I am creating a database to log faults with a system. I have created a form which allows the user to enter the details of the fault. But I also want to be able to display information about the location of the fault on the same form when a selection is made in the combo box.
For example I have created a combo box which allows the user to select the location of the fault eg. location1 and its address. I then want the text boxes on the form to display information such a telephone number of the location selected in the combo box. This information is taken from a seperate table.
Any help would be great. Thanks
I have a mainform with a combobox and a button. What i want is when i click on the combobox and then on the button I want that the textbox in the subform automatically fill in.
The mainform name is FrmTakenInvoerenEnToewijzenAanEenMonteur,
The combobox name is Keuzelijst1,
The subform name is SubTakenInvoeren,
And the textbox name is txtOpdrachtnr.
I tried this code in on button click:
Me.SubTakenInvoeren.txtOpdrachtnr = Me.Keuzelijst1
But that doesn't work.
Is there an efficient way to have default text in a textbox on my form (like a search box), but have it so that when a user focuses on the textbox (to type in a search term), the word should disappear.
Just like the search box on windows 7 start menu.
Then, is there a way to have the default text not be the actual text in the box? Otherwise, my search box will search the default text.
I would like to create a report that would really impress my supervisors, i just started at the company. I'm trying to create a call action plan, so i'm recording clients information on one table, and meetings we have had with each respective client on another table. Some clients will have multiple meetings, some few, and some none. I have a relationship set between them from the client's id number on the client table to the ClientID on the meetings table. one to many.
When I go to create the report, only the clients with meetings show up on the report, I would like client info to always show up on the report and meeting info to only show up under each respective client when it exists. I have worked out how to shrink and hide any text box without any info on it. It just seems like the existence of a meeting dictates where the client will show up at all in the report.