Cant find what I am looking for on the forum so if anyone can help me or tell me what to search for that would be great...
I need one of my forms to display a running total of updated records, but only those records that the user clicks a command button on. i.e if i have a recordset of n records each time I move to the next one (by clicking a command button) I want the control on the form to display the count of those records that have been updated only.
I am assuming I would need to add some code to the after update event of the form or on click event of the command button but cant really figure out what code to write.
i have a table with a column that reflects the below info, need to work out something for access to keep a count on the numbers of fields, have tried using conditional "count" in queries, the resultant value return is 12, this count omits counting all the "1", which is not i wanted, how do i tell access to start counting from the most recent "1" onward, and in this case the correct count value should return as "5", meaning there are 5 fields being entered after the most recent "1".
i want to be able to create an On Click Event when pushing a command button that will run an Update query to update a record and after it has been updated that specific record will pop up on a Form and be displayed. i know a different way is to run the Update query and then have it displayed in a Select query but i want it to be displayed on a Form instead. is it possible?
New member, so forgive me if this has been covered before:
Trying to build a Business database (more for the exercise than any desire to run a business) and have the following problem -
Have a Purchase Ordler Line table and an Item table - the item in the PO line is a lookup from the Item table - I want the PO line price to default in from the the item table.
Created the query and generated the form & subform - on screen, the substitution works, the PO line price does get picked up from the Item table, but the PO Line table does not update with this value.
I have a question about a form which has several fields on it. What I need to do is to capture the ALL the fields of the record I just entered(updated or inserted)
So, for example, if my form has fields for
RepID, RepName, Company
After I edit or insert a new record, when I click to the next line, is there a way I can use AfterUpdate event to capture ALL the fields that were just updated on the form, and do whatever it is I need to do with them? I hope I am amking myself clear. Thanks for taking the time to look.
I have created a form with two subforms within it.
The TOP subform enables the user to view a specific record (not change it)
The BOTTOM subform enables users to view a datasheet form of all the records and amend them where necessary.
I want the TOP subform to automatically go to the last updated record, meaning that if the user changes the data of a record in the BOTTOM subform it will automatically display the last record on TOP that was updated in the table.
I've looked at the macros available and it only allows me to 'GoToRecord' to either Last, Previous, New etc... Is there any way to go to 'Last modified in the table'??
In one form, I have to click on button that opens the other form. Each form is bound to its table and those two tables are linked by Primary [RaDAR_Id] and Foreign [radar_id] fields. I would like the code to:
* open the other form * move to the first record that has [radar_id] = [RaDAR_Is] if exists
If there is no any record in the other form that contains [radar_id] = [RaDAR_Id] then I want to create such record. So I am using the code (below). The problem is that the other form is not being updated.
Code:
Private Sub cmd_edit_usage_Click() ' DoCmd.OpenForm "frm_edit_usage" Dim lngRadarId As Long Dim patientId As Long Dim rsUsage As DAO.Recordset Dim rsUsageWrite As DAO.Recordset
I have a form based on a mysql table. There is a button in the footer to add a new record.
The pertinent vba code: DoCmd.GoToRecord , , acNewRec
It adds the new record and properly places the cursor in the first field. Immediately after the first letter is typed, the error message "Field cannot be updated" pops up. I can click ok and the message goes away and I am able to continue filling in the fields. The same thing happens if I add the record by use of the record selectors.
I have a form and a subform based off a query, I am trying to run a SQL update statement from one of the fields in my subform. I know what fields in my table i want to update but the Where part of the statement is what i am having a issue with.
DoCmd.RunSQL "UPDATE [Daily Work] SET [Daily Work].QC_Start_Date = Date(), [Daily Work].QC_Start_Time = Time() WHERE ((([Daily Work].CUS)=[Forms]![QC_Queue_Qry Subform]![CUS]) AND (([Daily Work].LN)=[Forms]![QC_Queue_Qry Subform]![LN]) AND (([Daily Work].Note_Date)=[Forms]! [QC_Queue_Qry subform]![Note_Date])))"
What this is trying to do is once the the field is updated i want to set the date and time of that record in my table, basically I am trying to time stamp the record when the field in my subform in updated.
I have a form in continuous forms mode... Each entry is something the user is supposed to check on once and hour and update. I have a "Last updated" field. Now() goes into that field every time the record is updated. I have a querry that will show the users records that are over an hour old.
How can I get Access to pop-up a window or something to alert the user they need to look at something? It would be really nice if Aspect would start blinking in the task bar or something.
I have taken the Access Tasks template and modified a bit. It now captures and saves the time and date a record is modified. The database is on a network folder and is shared among our team users.What I would like to do next is make it,
1- capture and record on my Tasks table the user name of who created the record by using the fOSUserName() function. I have the table fields "Created by" and the VB code in a module. This would happen only once when the record is created.
I would also like to do this with the machine name for which I have the module too. fOSMachineName()
and,
2- capture and record the user name of who modified a record. For this I also have a field in my task table "Last Modified By" and i hope i can use the same fOSUerNmae() function.
I got to the point where I put an unbounded text box with the =fOSUserName() in it and it does show the user name but how do i get to record to my task table?how the template removes the tasks that are completed from the task list as soon as it is updated to completed? how can I make this happen with a cancelled option after I add it to the drop down list?
The journal ID above was an accounting entry, debit $16,797 and credit $-16,797. because it was entered as a reversing journal in the system, the table has captured the Journal ID with 2 dates. For my purpose i only want the one date (MIN) date, the total amount of the journal (either the debit or credit amount 16,797) and the total number of lines the journal ID has so in this instance I want the count to be 2 and not 4.
Im thinking with the total sum because theres debits and credits is there a way to do the absolute value of the journal MONY_A then divide by 2?
current SQL SELECT [One Year Data Lines].JRNL_I, [One Year Data Lines].CNCY_C, Count([One Year Data Lines].JRNL_I) AS CountOfJRNL_I, Min([One Year Data Lines].JRNL_D) AS MinOfJRNL_D, [One Year Data Lines].BUSN_UNIT_I, Sum([One Year Data Lines].MONY_A) AS SumOfMONY_A FROM [One Year Data Lines] GROUP BY [One Year Data Lines].JRNL_I, [One Year Data Lines].CNCY_C, [One Year Data Lines].BUSN_UNIT_I HAVING ((([One Year Data Lines].JRNL_I)="0002888269") AND (([One Year Data Lines].CNCY_C)="aud"));
Hey all, I was wondering if anyone might know how to obtain a reocrd count, I need to create a PERMIT number based on the number of records in my table. So I need the number of records in my table plus 1, which will then give me half of my permit number, I will then add the 2 last digits of the current year and add a "-" I think I have the date done, but I dont know how to obtain the number of records in my table? Can anyone help? Thanks
:mad: I have created a database to hold information on non conformances we have with our suppliers, I am really stuck, what I am looking for is to put a field into a table which counts issues with the different suppliers, if anyone can help it would be much appreciated! Thanks
I'm building a health data system that stores data from health tests as follows: [test01], [test02], [test03],.........[test25], etc etc. Each of these tests comprised of a "Pass"/"Fail" value.
Now, i'm building my queries for a feedback report to hand over to the client that is based solely on the 1 single client record. In other words the queries are designed to return only 1 single data record to be placed in the client report where the based on the corresponding [TestID].
So within this 1 data record i want a query to count the number of times "Pass" appears in the test fields?
As there are some 40-50 [test##] fields in this one test battery i don'y particularly want to go back and code an IIf statement for each component if i can help it.
I have a query that updates 1 field in tableA which is the sum of values from 3 other related tables. However, when 1 of the 3 tables has a record count of 0 then the query does not work??? How can I update tableA excluding tables with record count <1 ?
I am working through a lot of data and this is basically what I'm trying to do.
Let's say we have billed occurances for ABC Pet Store. What I need to do, is to see how many "billed lines" appear in the data. So if there are 3 billing occurances (let's say bill amount greater than zero) - in the data I want the query to populate a "billing occurances" field with "3."
In have a table which contains customer address details. I simply want to display a 2-column list. the first column to display a disnct list of city's from the main table. the corresponding column must give the no. of records that contain the entry in the first column.
eg if the main table had 5 customers that lived in london and 6 in Maidstone then
I have two tables - one contains customer names, the other customer appointments. So one customer - many appointments.
Each appointment is booked at a set interval (every 3 weeks, 4 weeks, 5 weeks...) which can vary from one appointment to another.
I want to do a count, in a query, to show in a report.
I need to count:
Total Cus_ID by interval - so how many customers are booked every 2 weeks, every 3 weeks, etc.
I need the count to be based on the customer's LAST appointment only.
I have tried, select query (group), crosstab (!)... querying a query... Total line using Max... then Last...
Nothing I tried works. The sum of appointments by interval should equal the total number of clients in the database... It gives me 4 times that... so it is counting every appointment, not just the last appointment entered.
I also will be including two other fields: activecustomer = yes and source = Eve - need to know criteria to set.
Does anyone have a good technique for enforcing a minimum number of records in a table?
I am attempting to ensure that in a table of Roles, there be a minimum of two Roles defined as Technicians. The field which identifies a Role as Technician is a Boolean.
I wrote a Function which does a domain lookup to count the number of Roles defined as Technician and am calling it from the BeforeUpdate event.
However, if there are 2 Technician Roles, and I mark a third Role as Technician, change my mind and try to unmark it...of course the Function can still see just the 2 existing.
I realize I can Undo the edit, but a user may not.
I’ve attached a zipped example of the problem I am having with customised navigation buttons.
In my main database the form “subfrmPersonsContact” works perfectly. I have exported it to a new database and now the customised record count fields do not work at all – they are in fact blank even though the navigation buttons do still work.
The code running the form and the record count fields is listed below – I have no idea why it’s not working.
Any help would be greatly appreciated.
Cheers,
Rusty :D
Private Sub Form_Current() On Error GoTo err_Form_Current
Dim rs As Recordset Dim Count As Integer, Position As Integer
Set rs = Me.RecordsetClone rs.MoveLast rs.MoveFirst
Position = Me.CurrentRecord Me!txtRecPos = Position
If Position = 1 Then Me!gotoPrevious.Enabled = False Me!gotoFirst.Enabled = False Else Me!gotoPrevious.Enabled = True Me!gotoFirst.Enabled = True End If
If Position = Count Then Me!gotoNext.Enabled = False Me!gotoLast.Enabled = False Me!txtRecCnt = "of " & Position Else Me!gotoNext.Enabled = True Me!gotoLast.Enabled = True Me!txtRecCnt = "of " & Count End If
rs.Close
exit_Form_Current: Exit Sub
err_Form_Current: If Err.Number = 3021 Then Resume Next Else Resume exit_Form_Current End If End Sub
I've searched the database and found similar problems but don't understand the replies (mainly DCount()).
I have a control form where a user can search the database by entering information. The form asks them to type some text that will appear in a description field, and match any records with the same text.
However, when the user types the text and clicks the button to open the form (which is linked to a query searching the description field), I want a message box to say no records found before opening the form. Mainly because when it doesn't find a matching record, the form opens with a new autonumber.
I either want a matching record to appear, or a dialog box saying no matching records found and the form not opening therefore not creating a number that is not used.
I tried in the command button entering if recordcount>0 then openform but it doesn't like the else statement or doing a if recordcount=0 underneath.
I've only recently gotten to know about continuous forms and their use a bit. So for example, I used a maximum number of pre-defined (6) visits. I need to change that still, but during the development of the sales forms I already ran into a problem.
At first I was planning to have a certain maximum number of items to have on a form and create an invoice from that. But of course that would limit the number of items on one invoice which isn't good. So, now I have a continous form which adds a line containing productname, price, nr of that item etc. anytime needed.
In the previous design idea it would have been easy to calculate the total amount of money at the end of the list since the list was predefined. So I could just say invoiceamount = itemID1amount + itemID2amount + itemID3amout etc. With the "new" design however that is impossible to do since the number of objects is unknown. So how do I create a piece of code which does that? In the continous form I have a SaleID which keeps track of which items belong to a certain Sale and a TotalItemsID autonumber which keeps track of the number of lines (items) which belong to that specific Sale.
So I need to count the total number of TotalItemsID's within a certain SaleID and then have a piece of code which creates a sum of that counted list of items.
I'm new at this, I've found the function Dcount() should be used to accomplish this, but the rest, as of yet, remains a mistery to me.
I have a Report Generated on Access Database, the report is 56 page now i'm tring to put the total records on that report, how do i do that ??? pls help
