Using Combobox To Show Only Remaining Items?
Sep 18, 2015
I want to use combo box to select the resources to assign, but want to only show the remaining item, each time I click for new record.for example staff allocated for different jobs.
seat assigned to each person, so each time the free seats only be displayed in the list, Not the already assigned.
View Replies
ADVERTISEMENT
Mar 5, 2014
I have a query call courses and field name expiry date I have add additional field within the query to show how many day left and how many days over the expiry date
Code : DayLeft:[expirydate]-now()
but i just get a error when i run the query
I also would like to ask is this possible to be done within the table e.g adding another field dayleft and some how add formula to calculate number days left or over due .
View 2 Replies
View Related
Oct 20, 2006
I have a combobox(cmb_periode) which I am populating with a querry when I select a value from another combobox(cmb_periodicite).
This all works well, but I have a problem when I want to remove the items from the combobox(cmd_periode).
Its a little wierd cos it deletes the first record and gives me an error saying that the 2 is not found.
My code is given below...
Private Sub cmb_periodicite_Click()
For hasItem = 0 To cmb_periode.ListCount - 1
cmb_periode.RemoveItem (hasItem)
Next hasItem
id_per = DLookup("id", "periodicite", "libelle='" & cmb_periodicite.Value & "'")
Set rs = CurrentDb.OpenRecordset("SELECT periode.libelle FROM periode where [periode].[id_periodicite]=" & id_per)
With rs
While Not .EOF
stringItem = rs!libelle
cmb_periode.AddItem (stringItem)
.MoveNext
Wend
End With
Form_indicateurMesure.Requery
rs.Close
End Sub
View 1 Replies
View Related
Nov 23, 2006
Hello to all .
Have you got any idea ?
I have a List Box in a table and it is set to permit multiple items selection
from it .
The fact is I can select, as I wanted, multiple items from it through
the Form but when I go to the correspondent table to see the results
the selected data from the List Box isn't there .
Note all data selected from the List Box is visible trough the Form but
not the table .
Has this problem anything to do with mismatch in data type configuration on the table ?
Lots of thanks in advance
Miguel
View 1 Replies
View Related
Nov 29, 2013
How do I exclude something from a ComboBox?
My form is a profile of a dog and contains a Dog_ID. The ComboBox is a list of dogs names and shows all the females I want it to show all the females less the female that it is being linked with.
View 1 Replies
View Related
Nov 26, 2013
I would like to show all linked components (once) in a query.
With inner joins (option 2 when double clicking on a relationship line), it shows all linked components but with duplicates.
When selecting option 1 (only include rows where the joined field from both tables are equal) I only get 1 row due to the fact that not all components have values in all columns.
Therefore, How to create a query that shows all components that have one or more links to other parts. These links have be checked 3 tables.
I attached a overview of the tables involved.
View 12 Replies
View Related
Jul 21, 2014
I'm creating a Form called Pharmacy where I can select a [Diagnosis] from a combo box in the form. This combo box source references a table called tblDiagnosis where each Diagnosis also has a multi-valued field called [Indications].
The Pharmacy form also has a multi-select listbox with all possible Indications. I would like to write a VBA code such that when a Diagnosis is selected, the Indications for that Diagnosis are automatically selected/highlighted in the listbox on the form as well.
As such, by selecting a Diagnosis, all the indications attached to that Diagnosis will automatically be selected; however, if additional indications are needed, they can still be selected afterward.
I know that there is a function Me!Listbox.Selected(i) = True, where i is the row of the entry in the listbox. However, the i in the listbox does not correspond to the ID of the Indication. I think that if there is a way to select listbox items by name, that would be much more efficient.
The reason I have a listbox, is because this listbox of Indications then references another table called tblDrugs where all drugs that are approved for the selected indications selected are filtered and displayed.
View 1 Replies
View Related
Nov 17, 2014
I have a combox with the following query in its RowSource: SELECT [Error Codes].[ID], [Error Codes].[ErrorCode], [Error Codes].[Active] FROM [Error Codes] ORDER BY [Error Codes].[ErrorCode];
I now need to change the query's Rowsource via code and so far I have figured out that this works:
Code : Forms![frmAcceptReturn].Form.cmbErrorCodes.RowSource = "Select ID, ErrorCode FROM [Error Codes Missing]"
However, the table "Error Codes Missing" also has a field called "Active" which I need to take into account; If the error code is not active then it should not show up in the combobox.
I know how to do that in the original RowSource, but how do I do it with code?
View 9 Replies
View Related
Oct 29, 2014
I have a form which when displayed shows all the items on the table (usually 1 or 2) for a particular key.
The following row is part filled in awaiting further input for the rest of the fields of that row.
I have a button (exit) which basically closes the form but it also validates the (potentially) partial field ultimate row. If the user hasn't added any data to the partially filled row then I delete that row with this code.....
If IsNull(Me.Field1) or IsNull(Me.field2) Then
....If Not Me.NewRecord Then
........ DoCmd.SetWarnings False
........ strSQL = "DELETE * FROM [Component Swaps] WHERE [ID] =" & [ID]
........DoCmd.RunSQL strSQL
........ Me.Refresh
........ DoCmd.SetWarnings Trye
.... End If
.... DoCmd.Close
.... Exit Sub
End If
This works. I have copied the exact code into the close event for the form but it seems like in that part of the code the previous row is being picked up.
So for example if I have 2 records on the table I display 3 rows (as 1 is created with partial data) thus
ID.....Prefilled Field......Field1......Field2
1......fromrow1............F1...........F2
2......fromrow2............F11..........F22
3......generatedrow3.....NULL........NULL
If the code goes through the exit event then Me.Field1 and Me.Field2 are Null and the record with the ID=3 gets deleted.
Going through effectively the same code for the close event Me.Field1 = "F11" and Me.Field2 = "F22" and the record doesn't get deleted (ID=2 as well)...
View 6 Replies
View Related
Jun 19, 2015
I have a list box that allows multiple selections [Inventory]. I also have a combo box that has multiple selections [Shows].
Right now, user selects from list box and from a combo box and clicks a button. On button click, the items from the list box are associated with the PK from the combo and stored in a junction table. This allows me to quickly associate many inventory items to one show.
I realized that there I currently have no way to prevent duplicate Inventory+show records in the junction table besides having a composite key. This would be fine except no records get inserted into the junction table if there's a duplicate entry.
Ideally, I think that the user should select from the combo box [Shows]. This should narrow down what shows up in the list box [Inventory] in a way that Inventory items already associated with the show are not displayed.
If I have 10 Inventory items and Inventory items 1-5 are already associated with Show 1; after I select the combo box, the list box only displays Inventory items 6-10.
Here's the associated code
Option Compare Database
Option Explicit
Private Sub cmdAddRecords_Click()
Dim strSQL As String
Dim db As DAO.Database
Dim rs As DAO.Recordset
Dim ctl As Control
[Code] ....
View 13 Replies
View Related
Dec 9, 2013
Given a subform that lists items:
a
b
c
d
e
f
g
Given a table that contains a coverage field
customer coverage
smith a, b, d, g
How would I create a relationship between a subform and a coverage field such that when i multi select items in the subform, it will show what items are selected in the coverage field as in the example.
View 1 Replies
View Related
Apr 15, 2013
I am building a replacement Access 2013 database for our ageing Access 2003 database. I have an invoice form with a subform with a combo box that allows me to select which jobs to invoice based on the customer selected in the invoice form, which is working fine. I have designed my invoice and have the criteria [Forms]![Invoice]![ID] in the report query so that it just selects the record that is open in the invoice form. I have an ID (which is the invoice number) group on the report and it is then sorted by date and then job number. I thought it was all working fine when I tested it, it is the same method as I used in the 2003 database. However I have a problem, when I make up and print the customers first invoice it works fine, but when I go to make up a second invoice for the same customer the invoice includes all the jobs from the first invoice as well, and if I then go to reprint the first invoice all the jobs from the second invoice as there as well.
View 1 Replies
View Related
Apr 23, 2006
i searched for similar combobox features, nut didn't find any that helped.
i have 2 unbound combos that get heir values from different tables
first combo1 gets its values from a query
SELECT [tbl_music].[MID], [tbl_music].[Artist], [tbl_music].[Song], [tbl_music].[CID] FROM tbl_music;
combo2 gets values from
SELECT [tbl_category].[CID], [tbl_category].[Category] FROM tbl_category;
IDs are autonumber and primary
The CID fields in the tables are in a 1..* relationship
Both are constructed with the wizard and the ID columns are hidden.
What i need is:
when selecting something from combo1, the combo 2 should show the right category for that song.
Hope i explained clearly enough.
I tried to use the dlookup function, but i get error 94, invalid use of null.
i'm using the afterupdate event.
I can update a textbox text, but can't do so with the combobox value.
Any ideas what i'm donig wrong :confused: :confused: :confused:
View 10 Replies
View Related
Aug 19, 2006
I have a subform for a hotel list, I have a combobox on the subform that show the list of the hotels, what I need is to create some fields on the subform wich shows me all the details of the hotel as address, email, facilities once I have selected a hotel from the combo list.
How can I achieve this!
Thanks
Marco
View 7 Replies
View Related
Jan 4, 2014
I have a question about combo box , i want when i click on combo box show picture , for example i create a form by 2 languages (English,French) each language have a specific flag , when i click on the combo box show English and beside English show USA flag with French Language and beside French show flag of French.
View 3 Replies
View Related
Jan 17, 2005
Is there a way to show all combobox selections in a memo field so the user knows what they have already selected? Thanks for any help.
View 2 Replies
View Related
Mar 4, 2015
How I can get a combo box to show only the last id in its list when the form loads.
View 1 Replies
View Related
Jan 28, 2014
I would like to know if the following is possible: I have a table, I have a form based on that table (datasheet view) and I would like for certain columns to visible or not based on the input on a Combobox (list of countries) that is based on another form.
I have searched on the web and I found that the following:
On a button based on the main menu form:
Code:
Private Sub Go_Click()
Dim stDocName As String
Dim stOpen As String
stOpen = Me!cboDest
stDocName = "Datasheet"
DoCmd.OpenForm stDocName, , , , , , stOpen
and then on the event "on open" of the form Datasheet I have inserted the following:
Code:
Private Sub Form_Open(Cancel As Integer)
Select Case OpenArgs
Case "USA"
Forms![Overflow]![Tasks].Visible = True
Forms![Overflow]![Constant Number (Min)].Visible = True
[Code] ....
I have done it as a test, but it appears that it does not work. It opens the forms, but it does not hide or show the columns based on the option, it brings all the columns.
View 14 Replies
View Related
Apr 4, 2013
Ok I have a list box (CounselorInitials) and a listbox (AssignedToYou)
The list box has 6 columns and is using a query (AssignedToMe). The important one is the 6th one (Counselor). All working off a table called DityLog.
I want to select initials in the combo box and then it will filter the listbox and only show records that are the same.
So if I select initials MC from the combo box I want the Listbox to show all records that have the initals with MC.
View 1 Replies
View Related
Apr 22, 2014
I am using Access 2010. I wish to show or hide controls based on the value in the combobox. The combobox is bound with the data type Yes/No. If Yes, controls should be visible and if no, they are to be invisible. The database is a linked one. This selection should update all the users' forms.
View 2 Replies
View Related
Oct 20, 2014
I am trying to get a combo box to only show unique values, but I can't get it to work properly - it still shows duplicates in the list.
The Row Source is set to
SELECT DISTINCT Areas.ID, Areas.Area FROM Areas ORDER BY Areas.Area;
And the combo is bound to column 2
View 12 Replies
View Related
Aug 30, 2013
I'm using a combobox to select a record based off my primary key field, and then a separate button to print that particular record.
When the form loads, it has the first record selected but the combobox is empty so that if I press my button it will still print the first record.
when I press the combobox my list of entrys in the primary key field shows up and the combobox is no longer blank.
How do I show the first primary key field in the combobox when the form loads?
View 6 Replies
View Related
Jul 7, 2014
I have a field in a table where it is a lookup is a combo box. So this makes the data type of the field a number when in reality it is a text. When I have this field show in a list box it shows the number instead of the text.
View 5 Replies
View Related
May 3, 2015
I have a table, with a related value in another table. E.g. A Items table with a batch value from another table.
I have a form to enter how many of these items has been used and from which batch number they belong.
The batch number is from a dropdown, and batches can be finished(exhausted) and marked such in the table so they no more show in the dropdown.
All this works fine, until, I go back to a entry which was from a batch that has been finished. The combobox is empty although the (Already finished) batch number is mentioned in the table. This is perfectly normal as my query for the combobox is :
Code:
SELECT ItemBatch.ItemId, ItemBatch.ItemBatchNumber, ItemBatch.Finished, ItemBatch.ItemName
FROM ItemBatch
WHERE (((ItemBatch.Finished)=False)
AND ((ItemBatch.ItemName)=[Forms]![ItemMasterForm]![ItemDataSheet].[Form]![ItemName]));
What I want is to show the current batch number as well. I tried to make this query get the current value, but wasn't successful. I tried to make a calculated field based on the dropdown and show its value.
Is there any way I can show the batch number in the datasheet? I have to use a datasheet and not a form, because there will be many sub records for the main form, and having a form will be very uneasy.
View 3 Replies
View Related
Apr 1, 2013
I have a suppliers table and a products table. Two forms, Stock form with combobox to list Suppliers and a sub form with combobox that lists Products.I want to select a supplier from the Stock form and then the combobox in the subform to only list products directly sold by the Supplier.Have dabbled in SQL as follows:
SELECT Products.ProductID, Products.ProductName
FROM Suppliers INNER JOIN Products ON Suppliers.SupplierID = Products.SupplierID
WHERE ((Stocksubform.SupplierID=Stock.SupplierID))
ORDER BY Products.ProductName;
View 2 Replies
View Related
Mar 24, 2013
I created a navigation form on which I put a form call [frmAnimal Setup].
I then placed one combo box on the Navigation frm Header. I have bound it to its source and it actually queries the tbl and show the right info. However when I select one, it will not let me.
In addition, [frmanimal setup] will not allow me to select a breed although it does query the tbl and shows the right information.
View 1 Replies
View Related