Are there any issues with converting an older 97 database to 2003? Is it a straight conversion, or will there be differences that affect the way the database will run if converted? I've read somewhere that it is possible to use the newer version to open the database w/o converting it. It seems silly to have to install 97 on a new computer in order to view the db.
View RepliesHi all,
Does A03 have a cheap/free stripped version out there?
I gotta install my DB on some more PCs in the office and have run out of licenses on my office disk for access.
Goodmorning,
Got a problem here with Access 2003: got 36 categories (example: volume from 0-0.1=category 1 vol from 0.1-0.2=category 2 etc) and a whole bunch of records (in a table) stating volume per record (0.111, 0.23456 etc). For each record I need to know which category it is. Now in order to prevent me from writing 36 update queries for each category (if vol>0 and <0.1 then category = 1 etc) there must b a smarter/faster way to do this. What is it?
Thx,
Lobhaan
I am getting the following error when Synchronizing Now for Replicated database. The total database size is only 22 megs (contains reports and forms). This just started happening recently, otherwise it was fine before. My machine is running WinXP Pro SP2 (with latest service pacs) on an AMD DualCore 3800 with 1gig RAM. Once you hit the OK it continues and competes successfully (at least it look OK). Any ideas what this could be or to eliminate it popping up? I run the database with minimum of programs at the same time.
Thanks
Hi,
My database consists of some personal data and a photo of each person.
I am trying to include these photos when I browse the database via ADP.
I have found instructions how to do so at Microsoft website (article ID: 285820)
Link for it: http://support.microsoft.com/?kbid=285820
The problem is I cannot make it !!!!!!!!
Where exactly should I paste the VBscript in the page code to execute displaying of the photos???????
I am happy to send you the head portion of my page code if anybody knows where to paste it.....
Please help,
Jimmy
I have a very simple Access database that contains a form where users enter sheduling information...I wish to limit a group of users to be able to read this information only and not modify or add to it.
The tables are in a back end mdb. The rest is in a front end mdb. And the users actually use the mde file when working with the schedule.
What in your opinion is the least complicated method for providing some users with the ability to add/modify and some with read only.
Thank you.
Suzanne
I have developed an application and packed it into a runtime version.
However, in the runtime version the shortcut menus do not work. The reason why I want the user to have that possibility is that the application has two hyperlink fields and it is much easier for the users to be able to browse to the documents instead of typing each link with all the errors that might give as well.
Any help would be appreciated.
Hi.
Will a database created in Win Xp using Access 2003 work on machine running Win 2000 Pro and Access 2000?
Thanx
Very General Question
What version of Access do you use?
And if you use Access 97, why do you choose to use that over that of Access 2000 or higher?
I am curious to find out the reasons.
As for me, I use Access 2003 all around.
Help!
I just created a calendar pop-up for data entry in Access Version 2002 and it does not work with Access 2003. Any help from anybody would be appreciated!
An application that I made was created in Access 2000 as I was told that all users had at least this or newer. Of course a user with 97 popped up. Instead of having them purchase 2000 or newer I converted my app to 97 version. I expected troubles with references. So far this has only been a phone conversation and I plan on going there later today. The user says hitting alt/F11 does nothing... no code window comes up. I had her look through the menus for the code window but she says there is nothing there. She is getting runtime 3433 (she thinks) and unrecognized database format when trying to open a form. The database did open when holding the shift key though.
Before I go there, how do I open the code window for 97?
Any other suggestions? I bet this is a reference thing but there may be a problem with their access install too. There are 2 users at this location with the same issues... at least it sounds like it.
how do i go about this
i'm unable to do any upgrade of this version of access on my machine running windows XP, it is only possible on a machine running windows 2000.
what do i need to do to be able to tweak reports and forms and stuff.
Thanks
Happy thanksgivings
Hello All
I have a database which is use at busy times to run the delivery side of our Floristry business. The orders are entered,assigned to a delivery area, address labels printed. When it comes to delivery day orders are selected from the list ticked off then printed a make a list for the driver.
It was built using Access 97 when it first came out. Since then the software was upgraded to Access 2000 many mods have been made each year to improve the performance and the number of things it can do. It now has about 15 tables and a lot of queries.
Not being an expert with Access a lot of the design has been on a trial and error basis. Put it another way the main form has many hidden fields to make things work behind the scenes. But it does most of what I want it to.
I have now go to the point where the main query is saying that I can't add any more features because I have to many fields in it.
So the time has come to look at re building it for a number of reasons.
1. It is a stand alone database on one Pc.......... I would like to have it on a network to 3 or 4 Pc's around the shop.
2. Some of it needs to be redesigned to take out my ( it might not be the way a designer would it but it does work) type bits.
3 I would like to be able to use the system for all orders received on a day to day basis. So it will need to be used by other people.
My question today is
Should I be looking to rebuilt it using Access 2003 + the extra software so that i can run it on more than one PC.
Or would it be better to wait few months till Acess 2007 comes out and start from scratch.
thanks
Kevin.
Here is a question.
I go to the menu bar, Help->About MS Access
It's shown Microsoft Access 2002 SP3
This is MS Access 2002 Version, right.
But, at the top it is shown (Access 2000 file format)
Why do I use 2000 file format in Access 2002 version?
Hello everyone.
I've got an VB app that uses an Access db that sits on a sever. The owner of the app has no Access installled on site. The prior consultant created the app and used MS Access.
Is there a way for me to determne what version of Access this db was created in?
Thanks
Dom (new to Access)
Hello,
How can I get the Windows version that I have installed on my PC from ACCESS 2005 (VBA)?
Thank youvery much
Hi all,
My boss get this message when open a form in his pc
"Your Microsoft Office Access database or project contains a missing or broken reference to the file 'pdx.ocx' version 1.3"
Unfortunattely this message didn't appear in my pc :) .
I make a small program to open a pdf file from access.
Could you help me please to solve this problem.
Thanks in advance for your help
-cacing
I am trying to determine what version of Access is being used from a file that I obtained from a user. Everything I clicked on does not say what version of Access is being used. The extension name of the file is .MDB. The original version of the file I am accessing was created in 2001. Thus would you tell me how to verify what version of Access I am working with?
View 4 Replies View RelatedI know its possible to have 2 different versions of Access installed, and that you have to uninstall then start in with the earliest version. BUT can I have 3 different versions? I think it should be no problem but thought I would ask first.
I am looking at 97, 2000, and 2003. Plan is to do just Access 97, 2000, and then the full office install of 2003.
When will Access support the .Net framework?
Will Microsoft ever consider making another RAD program similar to Access that supports the .Net framework?
Just think of an IDE of a RAD program similar to Access that has a full set of toolbox items already built in .Net that supports all of the functions / options that Access currently supports in its forms, reporting etc. and have the ability to interface with all of the .Net database engines... :cool:
All of the session from PDC content is also available online to anyone, for free, for six full months. For more information, refer to this blog post http://blogs.msdn.com/mswanson/archive/2005/10/24/484434.aspx. There are a few sessions that are interesting from the Access perspective:
OFF307: “Access 12”: Developing Collaboration Solutions with “Access 12” and Windows SharePoint Services “v3”
Speaker: Clint Covington – Broad overview of many new features.
http://microsoft.sitestream.com/PDC05/OFF/OFF307.htm#nopreload=1&autostart=1
OFF201: “Office 12”: Introduction to the Programmable Customization Model for the “Office 12” User Experience (Part 1)
Speaker: Jensen Harris – explains the philosophy behind the new UI and the ribbon changes.
http://microsoft.sitestream.com/PDC05/OFF/OFF201.htm#nopreload=1&autostart=1
OFF302: “Office 12”: Developing with the Programmable Customization Model for the “Office 12” User Experience (Part 2)
Speaker: Savraj Dhanjal – explains how to customize the new UI.
http://microsoft.sitestream.com/PDC05/OFF/OFF302.htm#nopreload=1&autostart=1
OFF310: Windows SharePoint Services: Developing Collaboration and Tracking Applications
Speaker: Mike Morton – explains many of the changes to WSS that can be used while building Access applications with WSS link tables.
http://microsoft.sitestream.com/PDC05/OFF/OFF310.htm#nopreload=1&autostart=1
OFF417: Visual Studio Tools for Office “v3”: Creating Office Application Customizations
Speaker: Andrew Whitechapel – details around how to develop managed task panes and addins for Office including Access
http://microsoft.sitestream.com/PDC05/OFF/OFF417.htm#nopreload=1&autostart=1
OFF415: Windows SharePoint Services: Developing Custom Workflows
Speakers: George Hatoun; Pravin Indurkar – details about workflow that can be used while building applications with WSS. Access will have hooks for working with WSS workflow.
http://microsoft.sitestream.com/PDC05/OFF/OFF415.htm#nopreload=1&autostart=1
Last, if you don’t read the blog post, know that you can right-click on the speaker video, choose Play Speed, then Fast to watch the presentations at a higher speeds.
Enjoy!
--------------------
Clint Covington
Lead Program Manager, Access
Microsoft Corp.
Hey,
I'm recently starting a new job and one of my tasks is to clean up their Access 2000 database. After looking through it and realizing how much crap there is in it, I was thinking about starting a new one for them from scratch. I was wondering if there are any pros/cons to redeveloping the database in 2003 verses 2000. Its a pretty small company with usually about 6 people concurrently working on it throughout the day.
Any thoughts would be appreciated!!
is there way to open access xp files in access 2000
View 1 Replies View RelatedIs there a way of specifying the version number of an Access application?
e.g. In classic Visual Basic you can specify the version number in the "Project Properties" menu option and then use these values in code by doing an app.major, app.minor etc... (or something like that).
Is there an equivalent in MS Access?
Cheers,
Kabir
We recently experienced network issues here at work. Now I need to make sure the current version of the MS Access application is running. Is there a version compare component with MS Access? Does anyone have a recommendation on software that will work well with MS Access 2003?
Help?
Thanks.
Hi,
I've got two tables in Access. The first contains 300 column headers running from top to bottom, i.e:
Title
First Name
Surname
..
..
The second table contains the corresponding data entries for 1000 customers running from left to right, i.e:
MR Trevor Smith ....
MRS Mary Jones ....
Ideally i'd like to append table 2 to the bottom ot table 1 so the correct data field is under the right column header but I can't do this. Is there a transpose style funtion in access which will mean I can convert table 1 to run from left to right instead of top to bottom?
Thanks
J7