Want To Cancel On Enter Event
Jan 26, 2005i dont want a user to be able to change a value in a combo box if a textbox is not null.
im not sure what to add on the onenter event. is there not somthing like cancel=true
i dont want a user to be able to change a value in a combo box if a textbox is not null.
im not sure what to add on the onenter event. is there not somthing like cancel=true
I dont want to remove the close button in access, but i cant figure out a way to cancel the quite event if there is dirty data.
View 1 Replies View RelatedI have docmd.sendobject that opens Outlook to send an email, etc. However if the user does not send the email and cancels out of the message Access is asking the user if they want to debug. How can I simply have Access return to where the user was before they hit the command button that launched Outlook. I don't want them to go into the code. In fact I don't even want a message of any type - I thought I could trap the cancel somehow and code for it...
Thanks,
Ken
Hard to search for ths really, but I have a form with two buttons: Save and Exit.
Save saves the current record
Exit does an Undo if the form is .Dirty
If I cancel from the title bar, then the records are saved and the Close event is activated.
What I need is to detect if the Cancel box was clicked so that I can do an Unload before the form closes
TIA
Liam
btw, I'm getting the hang of this. It's a lot different from mainframe Cobol but it's fun to learn new stuff.
Is there a way to cancel a form's close event? If a user clicks the form's close button, I want a msgbox to ask if they are sure, and if yes continue and close, else cancel the forms close event. I know how to perform the msgbox and the if statement. I can not figure out how to cancel the form's close event.
View 2 Replies View RelatedI have an app that is browsing a survey. When the survey is in simple 'browse' mode, I want to be able to emulate the effect of a SkipResponse. (A SkipResponse is when selecting a particular value causes the normally sequential processing of survey questions to become non-linear. A sort of If Response = thisvalue then next question is something else) I can 'request' the SkipResponse by using Ctrl/Alt click, and then emulate returning from the target question by using Ctrl/Shift Click.
My problem is that I want to do the same thing (for a return) by allowing Ctrl/Shift on the Exit button. If I just use a regular mouseup evvent, it will complete, but will then go ahead and run the code for the Click event, to exit the survey. What I would like is to be able to cancel the processing of the Click event from within the handler of the MouseUp event.
I am trying to use a Combobox BeforeUpdate Event to achieve a required result.
I have two combo boxes inside a frame. The first is a year number 2011, 2012, 2013, 2014
The Second is the Week No ranging from 1-52, but 1-53 in some cases and this updates accordingly with the year number selected.
When the user has selected Week 53 and then changes the year to a year where only 52 weeks exist I want to Cancel their event.
I have already made a function to determine if 53 weeks exits however when I come to do the Cancel Event, the combobox for the year doesn't change back. It stays on the users new selection.
Below is the code that I am trying to use:
Private Sub cmbWeekNoFromYear_BeforeUpdate(Cancel As Integer)
If UpdateWeekNoSelections Then
Cancel = True
Me.cmbWeekNoFromYear.Undo
End If
End Sub
'cmbWeekNoFromYear is the name of the combobox which holds the year number
'UpdateWeekNoSelections Simply returns True if I want the users change cancelled for cmbWeekNoFromYear
I have a form with a control for the user to enter some data and then two command buttons 'OK' and 'Cancel'
For the OnExit event in the control I have a procedure that check the user input and if incorrect, opens a message box with an error message asking the user to correct the data. It then cancels the event so the focus remains in the current control.
However if the user presses the 'Cancel' command button on the form to cancel & close the form, the OnExit event for the current control still fires and asks the user to correct the data.
In my code in the control, how can I recognise that the Cancel command button has been pressed, so I can cancel the OnExit event and close the form?
I have a form (Pipeline) with an on load event that automatically directs the user to a new empty record.
Code:
Private Sub Form_Load()
DoCmd.GoToRecord , , acNewRec
End Sub
Now my problem is that I am trying to design a 'search form' that will allow the user to look up a specific record in the main form by pressing a command button. Creating the search form is easy enough. I cannot figure out how to override the on load event in the main form when pressing the command button.
As it is right now, the button opens the form and then go directly to a new record.
I have a form with 3 textboxes. Data in any one of them will be used in a query which is run currently through a command button.
I want to run the query after the user hits Enter in the textbox after their data.
I could use the 'after_Update' event but this activates when focus is lost from the text box, or on Tabs etc - not the intended function.
Any way to simulate this? (trap the chr of the Key?)
tx
Hi, I am not entirely sure where to look in the forum to answer this question, maybe someone can help me. I am just trying to create a simple code that would open a form if a user enter in a field a value that never has been entered before and open a other different form if the user enter a value already recorded. I can't find a 'not in recordset event', but there must be a way as when the form is set to Data entry with no duplicates an event occurs depending on the data being already recorded or not.
View 5 Replies View Relatedif my user presses enter while in a control on the form.. how can you code that event.
View 8 Replies View RelatedI have a database with three tables:
Participants (with name...), Events (with Event Name, date..., Event Attendance (Participant ID, Event ID, Date).
Relationships all work and reporting works. I now want to create a form for entering attendance into a single event as a batch. I only want to enter the event ID one time and then be able to enter participant ID's for all attendees. The event coordinator will have a tablet running the db at the door and each participant will use their ID card to be scanned into the event.
I don't want the coordinator to have to reselect the correct event between each participants scan but instead to enter the event once and have multiple participants ID's entered for the one event. The date field is defaulting to current date/time [Now()].
when pressing the return key (in a textbox field within a form) an action should be fired, but it does not.
here is my code:
************************
Private Sub txmyTextbox_KeyPress(KeyAscii As Integer)
If KeyAscii = 13 Then
MsgBox "Return key pressed"
End If
End Sub
*****************
I have a form and a subform in it. I added New cancel button in the form so that the the user can cancel the record creation and no record will be inserted in the parent table.
But when details are entered in the subform (a datasheet) row records will be created in the subform table. what is the correct method or how to cancel these records if the user choose to click cancel button on the parent form.
Using Access 97, I have a single-form allow-additions form where a couple of bound fields are auto-populated 'on current' and a couple of other bound fields are left to be populated by the user (me!).
At the end of an input session, I can press ESC and then close the form OK. But if I forget to press ESC and try to close the form, I have an invalid incomplete record on screen.
How do I indicate that the new record isn't wanted? I have tried stuff like
If Me!txtRequiredBoundField = Null then
SendKeys "(ESC)"
End If
to no avail.
Thanks in advance.
Hi, I want my user to be able to "cancel" his entry. At first I tried just deleting the record they were working on. But that added numbers in the auto number "ID" field, and I also needed the feature for editing, so deleting wasn't an option. As of now I have something that works, but is kind of messy. I made a mirror "temp table" that I write the record to. If they "save" i append/update the record to the regular table, then delete it from the temp, if they "cancel" I just Delete it from the temp. Was wondering if there was a cleaner way to do this ?
View 5 Replies View RelatedHello All,
I am finding this one difficult so felt I should post my issue.
I have status field on my form. It is a bound field.
A combobox - inactive, active.
I wanted the field to do the following when changed
If change then msgbox = Please enter reason in activity notes
a vbYesCancel
If they select it calls the activity notes form - this portion works.
If they select cancel I tried making the field do
form.field.undo (Me.statusid.undo) - something similar
Cancel = True
to reset the field to the original state.
This fails and says my object is not valid
I would be happy to take any suggestions . As always thanks in advance.
Hi
After looking through the forums, i couldn' really see the answer i was looking for.
I have a form, that users can enter in details (with an auto-number created which is assigned to each record). Once they have entered the detials, theres a 'save' button which will save the record - which is fine. I also have a 'return' button which should return to the previous form and doesnt save the record. But as it stands, the record is saved when i click this return button. How do i make it so that the record isnt saved untill the save button is clicked? so if i return from the screen (pressing the return button), the record isnt saved (i.e. a cancel button).
Thanks in advance :)
I am having a problem with my cancl button on my form. this form has a subform. any changes cancel correctly on my main form. the problem is when there is a change on my subform and then is cancelled.. any ideas anyone? thanks!
View 5 Replies View RelatedI am trying to get my program to cancel a send e-mail command if certain things aren't filled out. Instead it is supposed to pop up with a message and then put the pointer in that field. The message box pops up, but the e-mail command is not cancelled. Can someone please tell me what I am doing wrong?
Private Sub SubmitAddCmd_Click()
On Error GoTo Err_SubmitAddCmd_Click
Dim stDocName As String
Dim strEmail As String
Dim strMailSubject As String
Dim strMsg As String
Dim strCopy As String
'Make sure MMS Job# is entered
If IsNull(MMSJob) Then
MsgBox "Please enter the MMS Job#"
[MMSJob].SetFocus
Cancel = True
'Make sure Client's name is entered
ElseIf IsNull(Client) Then
MsgBox "Please enter the Client's name"
[Client].SetFocus
Cancel = True
'Make sure job name is entered
ElseIf IsNull(Job) Then
MsgBox "Please enter the job name"
[Job].SetFocus
Cancel = True
'Make sure CSR name is entered for this job
ElseIf IsNull(CSR) Then
MsgBox "Please enter the name of the CSR for this job"
Cancel = True
'Make sure date job submitted button was clicked
ElseIf IsNull(Submitted) Then
MsgBox "Please click on the 'Date Job Submitted' button"
'[SubmittedCmd].SetFocus
Cancel = True
'Make sure mail date was entered
ElseIf IsNull(MailDate1) Then
MsgBox "Please enter a mail date for this job"
' [MailDate1].Value
Cancel = True
End If
'E-mail booking sheet to scheduling office in snapshot format
stDocName = "BookingRpt"
strEmail = "jhutton@merklenet.com;jsayers@merklenet.com"
strCopy = "rgarneriii@merklenet.com;"
strMailSubject = MMSJob & " " & Job
DoCmd.SendObject acSendReport, stDocName, acFormatSNP, strEmail, strCopy, , strMailSubject
Exit_SubmitAddCmd_Click:
Exit Sub
Err_SubmitAddCmd_Click:
MsgBox Err.Description
Resume Exit_SubmitAddCmd_Click
'Add new record
DoCmd.DoMenuItem acFormBar, acRecordsMenu, acSaveRecord, , acMenuVer70
DoCmd.GoToRecord , , acNewRec
End Sub
learnasugo
I have a Report linked with a SubReport. I would like to cancel viewing this Report if my SubReport Has No Data.
i tried this code but the report just shows up. Any Ideas?
Private Sub Report_Open(Cancel As Integer)
On Error GoTo Err_Trapper
If Reports![qryRepCurOrgProjsSR].Report.HasData = 0 Then
Cancel = True
End If
Err_Trapper:
MsgBox Err.Description
Exit Sub
End Sub
Ok i got an error message. Yoy entered an expression that has an invalid Reference to the hasData property.
Ive tried using a text bpx on my main report and putting a control source as
=IIf(qryRepCurOrgProjsSR.Report.HasData,0,"Nothing")
Then in my Report Open Event i put the code below. But it fails me still.
If trim(Me.MyText) = "Nothing" Then
MsgBox "The Report Is Cancelling....."
Cancel = True
Exit Sub
End If
I have a subform which asks a user to confirm the update before it happens - if the user selects no - then the update is cancelled.
When the parent (they are not related record wise) form is closed the update on the subform is attempted - if the user selects no - how can I cancel the close of the parent form. At the moment a message saying "Cannot save the record at this time - changes may be lost". Which I don't want to see.
Thanks
Folk,
I'm using the default command to add a new record in a table:
DoCmd.GoToRecord , , acNewRec
The question is: How I can cancel the new record inclusion on table? It's possible?
Thanx a lot,
Maikon
I have pasted the code that SJ posted on another thread that any changes to a record will ask the user to save before closing the form, this located in the beforeupdate event.
Private Sub Form_BeforeUpdate(Cancel As Integer)
If MsgBox("Save changes?", vbQuestion + vbYesNo) = vbNo Then Cancel = True
End Sub
The problem i am getting is that if the user selects no it pops up another message saying "You can't save the record at this time" followed by a description.
How do i prevent this second message appearing i cannot find a thread with this in?
Thanks as always
Mike
I'm looking for a way to cancel the closing of a form/app. I added a button asking if the user is sure they wish to exit, and am having difficulty finding the correct code to cancel the close event.Here is my codeDim ians As Integer ians = MsgBox("Are you sure you wish to exit?", vbYesNo, "Exit App") If ians = vbNo Then DoCmd.CancelEvent DoCmd.OpenForm "orderlist", acNormal Exit Sub End IfCan help or send me down the right path?Thanks
View 2 Replies View Related