I created a report using wizard and altered the parameters to what I need on my report and saved it as a new autoformat. The autoformat did not retain the parameter adjustments I made...only the basic format...no size changes...grouping I added ...a seperator line between the groups and the bound items I deleted that I did not want were still there. All I want to do is to be able to use the report format I created numerous times as it is without me having to go in and make adjustments with each query I pull a report from. There are several different query's with different tables involved. To sum it up one report format to use multiple times....Help Please!
I've created a database where I have all the information for people like name, address, etc. Then there's a list box to choose what events they will be attending. I want to be able to run a report and see all the information for the people who are attending any specific event. Is there a way to create a form where I can click a button then it brings up the screen to choose the parameters of my report, then generates the report? Thanks!
I am trying to figure what code to use. What i am trying to accomplish is when the use clicks to open a report i want a form to open and make them choose from a combo box a "training activity". then the report will generate info for that activity only.
I have a field in a table called reasons. Then I have a list of possible reasons in a drop down list for my form. I want to create a report that allows the user to select from a drop down of these reasons and do a query for only those records with that specific reason. I know you can ask that info be typed in by using brackets in the query but instead of typing the reason I want to be able to select from the drop down list to produce the report. Can this be done?
I would like to run a report that uses a stored procedure with parameters. Is there a way I can pass the parameters from the report to the stored procedure? I am NOT running it from a form.
I want to call the report from VBA code and pass it the parameters that are necessary to run the stored procedure. Any ideas?
I have an report that uses name paramaters.this is the sql for the report
Code:
PARAMETERS [whatCompany] Text ( 255 ); SELECT tblInvoices.ClientCompany, tblInvoices_Details.Charge, Sum(tblInvoices_Details.Hours) AS SumOfHours, tblInvoices.InvoiceID FROM tblInvoices INNER JOIN tblInvoices_Details ON tblInvoices.InvoiceID = tblInvoices_Details.InvoiceID GROUP BY tblInvoices.ClientCompany, tblInvoices_Details.Charge, tblInvoices.InvoiceID HAVING (((tblInvoices.ClientCompany)=[whatCompany]));
How do I pass the paramaters to the report? I've tried several different ways but can't get it to work
Code: Dim stdocname As String Dim stLink As String stdocname = "RptWithParm" stLink = "ClientCompany = " & "'" & Me.lstCustomer & "'" 'Using the field name doesn't work DoCmd.OpenReport stdocname, acViewReport, , stLink
'When I try to set the value of the paramater that doesn't work either stLink = "[whatCompany] = " & "'" & Me.lstCustomer & "'" 'using the paramater name doesn't work DoCmd.OpenReport stdocname, acViewReport, , stLink
I know I could use the value of the form in the criteria like this
Code: HAVING (((tblInvoices.ClientCompany)=[Forms]![frmTesRptParm]![lstCustomer]));
If I use the list box as the criteria I want to be able to use reports in other than one place, plus there are over 80,000 records and it'll run faster if I set the criteria before the report opens instead of setting a filter after it opens to only show up to about 100.
I've made a report on a blank report template. I've dropped in 5 sub reports. I have entered into the criteria for each of the queries based on [forms]![ClientForm]!CleintID. to run the report. It wortks but I have to enter the ClientID 5 times. Usually, when I create a button to run the form from, it only asks for the CleintID once. The 5 reports are based on 3 separate queries.
I need the following report to open with date parameters. I have the following code, but it doesn't quite work.
When an item is chosen from Modl (a list box) a box pops up asking for LowPop, then another for Start Year and then another for End Year.
Those last two aren't doing what they should. They should restrice the [Date] field to between the years entered as start and end. I would like to put it in the "OpenReport" line, but don't think that's going to work.
Code: Private Sub Command27_Click() Dim varItm As Variant Dim ModelWhere As String Dim strQuery Dim LowPop As String Dim SDate As Date
what i have is a form (image attached) and i need to be able to select any combination of parameters (including state, zipcode from GENERAL, i.e. referring doctor last name from RefMD, Drugname from Drugs, Diagnosisname from Diagnosis, and VisitType from Encounters) and filter PatientForm where all the selected parameters are true..
I'm pretty new to Access, so if I'm doing this the hard way, that's why.
I work in a quality control position, and I'm trying to set up a single Access database for the QC staff to use instead of everyone having their own seperate Excel workbooks.
The issue I'm running into at the moment is on a report. Each record is graded on four seperate types of criteria, Error Type 1, Error Type 2, Error Type 3 and Error Type 4, all of which need to be reported on seperately. So I have at least four queries set up, all with the same parameters (right now, just review date.) I'm trying to pull through all four queries on the same report, and so far I've had success having the report ask for the parameters only once and then applying it to all four queries. However, I'm running into a problem where Access is now forcing the filters of each individual query on to each of the other three queries, so it's only pulling through records for all four queries that match the criteria of all four. Any record which only matches the criteria of one, two or three of the queries is being left off the report.
Sorry if this sounds confusing. Anyone have an idea as to what I'm doing wrong?
I would like to have a user enter a start date and an end date into two textboxes on a form. The two dates will be used to query a table. I would then like to print a report that was created from that query.
Here is the query created as a stored procedure:
SELECT Transactions.*, Hoods.* FROM Hoods INNER JOIN Transactions ON [Hoods].[ID]=[Transactions].[BoxID] WHERE ([Transactions].[Date] Between [@StartDate] And [@EndDate]) ORDER BY [Transactions].[Date];
What would be the best way to pass txtStartDate to @StartDate and txtEndDate to @EndDate in the VBA code of the form? How would I open or print the report created from that query filtered on that date range?
Any suggestions? Am I going about it wrong? Should I have created the report from the above query, or should I do it another way? Can anyone direct me to some code that does all of the above or something similiar?
I very new to Access. I am using the Contact Database template from MS and added a field of text. I am trying to get a query to search the field for partial text. I've typed the following parameter to narrow it down because I only need partial information:
Like "*" & [How are the contacts involved in Organization?] & "*"
I used the query builder off of a report that was already created. I just want to be able to get contacts on the report that match the parameters inputted into the box.
When I run the report it gives me the following error:"You either have an error in your expression or you have attempted to use an undeclared parameter. Check the expression for errors or enter the parameter '[How are the contacts involved in Organization?]' in the Query Parameters dialog."I hit OK and it pulls up the report without data filled in.
I have a command button (well, I have a few) that I would like to open a report, first opening a form that allows the user to enter a start and end date.
The code so far is:
On Error Resume Next If Err = 2501 Then Err.Clear DoCmd.OpenForm "DateSelect", acNormal DoCmd.OpenReport "All Events Report", acPreview
Now, when run, this code opens the form (DateSelect), but the report starts to run immediately - the On No Data event of the report kicks in (message box along the lines of "No data, closing report", so before the user has the opportunity to enter the dates, the report has decided that there is no data an closes.
Is there a way to pause the opening of the report until after the OK button is clicked on the pop up form?
Just for the sake of clarity, the pop-up form DateSelect is used to open various reports, so I can't add the open report command to the code for the OK button (that I know of?)
The report is bound to a query that has 2 group by fields, 1 count field a a further field, a date field ([Part Date], that I put a default criteria on. This field is not displayed. If I don't put a criteria on this field disappears when I close and open again.
I pass a date to the program via a form and this ultimately ends up in SQLDate. When I run this I get promted to enter [Part Date] even though I'm setting it equal to SQLDate above. I can out garbage to a proper date in here either way the report picks up the default date entered in by the query.
1. Get rid of all of the parameters off the query.
2. Then you can use the Where Clause of the DoCmd.OpenReport code to specify the parameters based on your variables.
1.Not sure what this means but when I get rid of the criteria for the parameter the field disappears (I'm setting the show field to no as I don't want totals group by date). Getting rid of the field gives me all parts used.
2.I think I'm doing this in the above but will bow to superior knowledge!!
or is it I can't pass a parameter to a report run by a query that is grouping fields together to produce a count.
Incidentally once the report has been run (albeit with the wrong parameters) and I go into design mode and look at the property sheet for the report the correct filter is there (i.e., the date that has been input) but it quite clearly ignores this.
I have a navigation form that will have 6-8 tabs. We were using about that many databases, but we are finally consolidating them into one. The result of us using so many databases has been the multitude of forms and reports that were necessary for each database prior to merging them together.
The problem: There will be anywhere from 12-20 (text boxes) that the user can use to search anything in our database. What we need to have happen, if possible, is for those search parameters to show up in the header of our report if they have text in them. If the text box is blank, it should not show up in the header of the report.
I have read how to to do the start/end date technique, but I do not know if that would work for what we are doing since the boxes would only show up if they are populated by the user.
I created a Access 2010 database query to allow a user to search a list of orders between 2 dates, and I created a form for them to use for this search.
Then I created a report for the search results to land on. What I want to do is have the 2 dates that the user provided be displayed in the header of the report.
I created a new Text Box and placed it in the header. In place of the "Unbound" filler that was there, I placed
"=[Forms]![frm_DateRange]![txtStart]".
I used the following steps to do this:
Clicked on the Text Box controlPressed the "Property Sheet" buttonSelected the "Data" TabPressed the "..." button next to the "Control Source EntryThe "Expression Builder" came upDouble-clicked on the database name in the "Expression Elements" windowDouble-clicked on "Forms", then double-clicked on "All Forms"Selected the rpt_DateRange" formSelected "txtStart" from the "Expression Categories" window.I did not select anything in the "Expression Values" window.
When I go to "Report View", and see the Text Box I added, but inside it, it just says "#Name?"
I am wondering if it is possible to send a report as xls file and keep the format exactly as the report looks.When I try to send it now, it automatically changes back to the column names from the table, which I in the report have changed and want to keep in my excel output!
What I have is a single table that I need to create a report from. It has vehicle unit numbers, dates of service, repair details and costs. I am trying to generate a report where I can select a unit from a combobox and enter a date range.
In our Student Administration database, we have a Student Evaluation Report which prints a 1 page per student report in memo like format. The instructor had previously input rating numbers (4=Best, 1=Worst) for 9 categories for each student via a database form into the Evaluations Table.
Two other elements of the rating are an Attendance based on number of days absent and a Grade Point Average (GPA) calculated from the student's test scores. The instructor then prints and reviews the report with each student.
There is an Evaluations Parameter table which has the following fields:
Field Description
ID The autonum key field.
Class eg., 2015-1
Evaluation Number A single digit (eg., 1, 2). There may be more than 1 evaluation for each class.
EffectiveDate The "as of" date of the evaluation.
There are then several other tables that are input to a query that will be the record source for the report:
Table Purpose/Data
Students Student Name, Class
Absence Has a record for each student's absence with date and a 1 or .5 indicating a whole or half day absent.
Test Grades Has a record with each student's test results with date and score.
Evaluations Holds the rating score for each of the 9 rating categories.
The Student Evaluation report is launched from an unbound Reports menu form via a button. On the Reports menu form I wish to have controls for the user to select which evaluation to report on. The Absence and Test Grade information needs to include records that are <= the EffectiveDate in the Evaluation Parameter table. The Evaluations records need to match the Class and Evaluation Number in the Evaluations Parameter table.
I would like the user to be able to select the Evaluation Parameter via a combo box vs. specifying the Class, Evaluation Number and Effective Date separately and then have the query record source for the report use those two fields as criteria. But my limited understanding of the Combo box indicates that only 1 field from the lookup query of the Evaluations Parameter table can be stored in the control whereas I need 3 (Class Evaluation Number and EffectiveDate).
How the user can select the desired Evaluation Parameter record on the Reports menu form and use the 3 fields from the selected record as criteria in the report's record source query.
I have a database that tracks client contact and I have a report that I want to print that shows all the contact a rep has had with the client. I enter the start and end dates I want and the reps name and when I run the report its listed in date order so I might have Jane Doe - 10/1/06 then Jack Jones - 10/2/06 then Jane Doe - 10/3/06 (again) I want Jane Doe - 10/1/06 , 10/3/06 then Jack Jones - 10/2/06 and so on. I'm pulling the information from a query and when I run the query it displays it properly with all the Jane Doe records together but when I run the report is sorted by date. I am in the process of redoing this database and it's on the new one this happens on the old database it works like it's supposed to when I print/view the report.Any thoughts on where to check?Thanks,Rick
I would like my report to look like a table similar to the ones you can make in word or excel, with columns and rows and lines separating the entries both vertically and horizontally. I would like to make the size of my rows dynamic as they will re size to fit the largest entry in that row. If anyone knows how to do this, please let me know ASAP.
I have a report that gets it's from / to dates from a dialog form that is open. This is working fine but I would like the date format in the report header to be 10 Mar 08 at the moment it is displayed at 10/3/08 how do I format this?
I have a unbound text box in the header with the following set as its control source =Forms!frmDialogEmpl!RepStartDate & " to " & Forms!frmDialogEmpl!RepEndDate
